AcroTray?? acrobat 9 pro problem

Hi there!
Maybe there is a post from earlier but here is a new one.
I have adobe acrobat 9 pro and needed to test the 11 and so I did. After a month the test where finished and I uninstalled. After the uninstall of adobe acrobat 11 the 9 pro wouldent give me PDF prints (feks from Microsoft Word).
Have tried to contact adobe but my Pro 9 is of course to old so they wouldent help me!!! Good service :-p
Anybody out there that can help me with this issue??
PS: If Im in autocad and wants a drawing printed as pdf its possible and the acrotray.exe is still in the back of windows when I check.....
Please help me!!

Start out with Help>Repair. Then do the updates if you are not at 9.5.5. This has long been an issue with the trials.

Similar Messages

  • Adobe Acrobat Pro problem .. Please help!

    We have been using Adobe Acrobat Pro for my school laptop for last 4 years without any problems. Recently I have started getting error messages, where it says "It is a read only file. Please save the file under new name or folder". Sometimes it works if I change the name but sometimes the changes are lost. It is so frusttating as the laptop and the program is used for my 6th grade student with special needs. I updated the program but the problem still exists.
    Thank you for your help.
    -Sshah

    I think you're expecting too much of a conversion which will try to preserve the text and graphics, but not really the layout. Especially as HTML is much less flexible than PDF in the placing of things on page.
    Best to start again using a state-of-the-art HTML editor.

  • Problem with Adobe Acrobat Pro XI after installation on Mac

    I just installed Adobe Acrobat Pro XI on my Mac. My Mac has the correct version of OS and Safari yet I can not launch Adobe. When I launch it, an error box comes up and says a problem has been reported to Adobe.  That's as far as it gets. Has anyone had this problem before?

    Hi lsgahan,
    Please try the following steps and let me know.
    Delete all the files from following folders:
    Library/Application Support/Adobe/SLStore
    Library/Application Support/Adobe/SLCache
    And, delete all files from following folder except cache.db
    Library/Application Support/Adobe/Adobe PCD
    Launch Acrobat and enter the serial number when prompted and check.
    Regards,
    Rave

  • Acrobat (pro) 9 not working in safari and other problems

    i have several problems with acrobat pro 9.0.0:
    1) i installed acrobat pro 9 but when i go to "help" menu i get message: "there was a raise without a handler. the application will now exit" yet all other menu's function well.
    2) when i try to open a pdf file in safari i get the spinning wheel and nothing happens.
    this is what i did till now:
    1) uninstalled acrobat pro 9
    2) repaired permissions
    3) re-installed acrobat pro 9
    installed reader 9 but als getting the message: "there was a raise without a handler. the application will now exit"
    btw i have mac os 10.5.5 and all latest apps installed.
    any help is very much appreciated

    okay problem solved !!!
    i just used cocktail 4.1.5 to clear and delete all kind of caches. than i rebooted and everything is okay again.
    cocktail is from: http://www.maintain.se/
    so the problem is with some obscure caching

  • Acrobat Pro 6 Average Daily Production and Math.round problem

    Acrobat Pro 6 Average Daily Production and Math.round problem
    (Production.0) (154) (whole units) . (Production.1) (90) (fractional) / (divided by) 31 (days) results in (Average.0) (4)(whole units) . (Average.1) (10) (fractional) using :Math.round.� Noticed that 154 (whole units) . 85 through 99 (fractional) also show 4.10. (without Math.round : 5.00)
    Method:
    �Production.0� (whole units) . �Production .1� (fractional) / Days = (Average Daily Production) (�Average.0� (whole units) . (Average.1) (fractional)
    � Production.0 (value not calculated)�, � Production 1 (calculated) (event.value = util.printx("0099", (event.value)).substr(-2,2); � �Average.0 (value not calculate)�, and �Average.1 has following calculation:
    var punits = this.getField("Production.0");
    var pfrac = this.getField("Production.1");
    var average = 0.0;
    average = (punits.value + pfrac.value / 100) / this.getField("Days").value;
    this.getField("Average.0").value = average - average % 1;
    this.getField("Average.1").value = util.printx("0099", Math.round((average % 1 * 100))).substr(-2,2);
    �Math.round� appears to be a problem. Also, could you explain the purpose of �0099� . Anyway, why would 154.85 through 154.90 divided by 31 give 4,10. Also, their must be a better way, to find the average daily production. All you have to do is divided the production (whole. fractional) by the days, and display the average daily production as (whole. fractional). Any suggestions??

    There are a many loose ends in your question.
    First, I have never seen before a variable type called 'var'. Is it a java primitive or a class?
    Next, I cannot seem to find any class that has the printx method.
    When it comes to substr(-2,2), I get confused. First, I thought that it was a method of the String class, but I only got as far as substring(beginIndex, endIndex).
    If you really must break the production and average into pieces, try this:
    float average = (punits + pfrac/100) / days;
    int avg_units = (int)average;
    int avg_frac = (int)( (average - avg_units) * 100 );My guess is that util.printx("0099", x) formats x having two optional digits and two mandatory digits, showing 0-99 as 00-99, but allows to show numbers with three and four digits.
    154.85/31 = 4,9951612903225806451612903225806
    154.99/31= 4,9996774193548387096774193548387
    If you round the fraction of theese numbers multiplied by 100 ( = 99.51.. and 99.968...) you get 100, and this will be the output of printx. My guess for "4.10" is that substr(-2,2) returns the two first characters of the string, because the start index should not be zero. (According to java docs, substring throws an exception on a negative index, so what kind of class are you really using ??????)

  • Problems with text box borders, tabbing and saving doc in Acrobat Pro 7.1.0

    When I view my form document in Acrobat Reader, there is a red border around several text boxes
    in which I've selected 'NO border'
    Also, I've selected 'column order' for tabbing, but tabs continue to function in order in which I inserted form item (text box, check box or radial button). Since I didn't insert these consecutively, tabs no jump all around the form instead of proceeding in order from top to bottm and left to right.
    I've checked for Mac Acrobat Pro updates and see that there are three  - 7.1.1, 7.1.3, and 7.1.4, and am downloading them for install.
    Do any of the updates fix these problems? Or how can it be fixed?
    On opening document in Reader, I also get a message informing that document cannot be saved with changes and must be printed, even though I've created it with fillable forms.
    Is there some setting for allowing document to be saved?
    I want to be able to have recipient be able to download form, fill it out, save changes, attach to email and return it to me.

    This has been a problem since version 8 on the mac. Acrobat 7 on the mac worked fine with the right side trim but not on the PC.
    We are still having this problem with Acrobat 9.4.0 on the Mac & PC.
    This has now been an issue for 2 versions of Acrobat Pro.(8 & 9)
    Being in Pre Press and having to constantly set the trim for jobs, this is now taking up too much time and costing money.
    Please fix this Adobe.
    and on another note. how hard would it be to display the trim (if set) next to where the page size is?
    If the trim is set it should display it! why should we have to go to document/crop pages>trim.
    Im in a busy Pre Press Dept and the amount of times you have to check a trim size is stupid.
    I always set prefs to display crop / trim / and bleed boxes and this helps but it should display it if its set.
    Thanks
    Hope this is resolved soon.

  • Printing problem with Acrobat Pro 10.1

    I get an "Insufficient memory" message on my LaserJet printer when trying to print certain PDFs using Acrobat Pro 10.1, but the PDFs are printed without any problem from Acrobat Pro 9 or Preview. Does anybody else have this problem?

    Thanks for responding I was using an MS Excel spreadsheet to merge details to produce labels in a programme called NiceLabel Pro.  The information from the spreadsheet was very simple - a readable code number and a QR code.  In the Nice Label document setup you nominate the printer - in my case this was the Adobe PDF printer - to produce a Press Ready quality PDF file.  I tried several times to print this file and each time ended up with page 1.  As the job was urgent and I had a deadline to meet, I ended up installing a programme called Nitro - which also produces PDF - to complete the job, without a problem.  However, I would prefer to stick with my Adobe Acrobat software as the other alternative is limited in its pre-press options.  Hope this information will enable a solution to the problem.
    - Thanks, Lynne
    Hi again Dov - have you been able to come up with an answer to my Acrobat problem.  Would like to begin 2015 with workable Acrobat.
    Many thanks - Lynne

  • Problem printing PDF with Acrobat Pro 9.4.4

    Hi!
    I can't correctly print a PDF with Acrobat Pro that was created in Indesign CS5.
    I want to print it on a letter format (8,5 X 11") and it offers me a format of 8,49 X 10,99". It results in having my document being printed as tile with it's original format 12 X 21,5" as if I didn't adjust the format to be reduced.
    I temporary used Preview to print my PDF, but now I can't as the encoding in which I received the PDF used to be "Creo Normalizer JTP" and now it is "Adobe PDF Library 9.9"
    If anyone can help!
    This is my first time here, thanks in advance for your help

    Here's what it looks like (I work in french, hope you can understand)
    I just updated my software, thanks for that!
    Now, my problem is still on... I still have the very same result when I print. I did selected the correct Page Scalling I needed. I did selected the paper size I wanted. I chose Shrink to Printable Area and I tried with Fit to Printable Area.
    Since I've had this problem the size appears as : 8,49 X 10,99 (Instead of 8,5 X 11). I tried with Legal (8,5 X 14) but it appears as 8,49 X 13,99. I went through the preferences, but I can't find anything that could be the problem.
    Any other idea?
    Thanks!!
    Also, Preview was very helpful, as it did print my PDF correctly! I understand it's not the best... but it did the job

  • Problem with pdf-printing in Adobe Acrobat Pro

    Hi,
    I have Adobe Acrobat Pro 9.4.3.
    PDF-printing has always worked great but suddenly there is some kind of problem.
    After printing a excel-document from "Print to pdf" built-in function in MacOS OR Adobes Printer I have corruptet pdf-files when showing them in Adobe Reader/Acrobat, but the MacOS Preview-software shows them correct.
    So, there cannot be any problem with the printing, but the local preview on my computer using Reader or Acrobat. I dont even use the Myriad font in the document, I use Verdana.

    You say you're using Verdana but you're not. The error message clearly shows you're using MyriadPro Bold.
    You probably recently installed the Mac OS X 10.6.7 update which has a bug with OpenType PostScript fonts like MyriadPro Bold. Either use Verdana or another TrueType or PostScript font, or revert to Mac OS X 10.6.6.
    Read about the problem here: http://www.tidbits.com/article/12078

  • Problem exporting data in Acrobat Pro 9.0 from secured response form

    Hello,
    I made a form in Livecycle 9.0 and am distributing it through Acrobat Pro 9.0 - using Acrobat.com's form distribution application - in several cycles to see how varying the levels of security of the form will affect users (the folks who will be filling out the forms), once they get the forms.  I want to see how many passwords they have to enter, what they can do, what they cannot do with the form..  I've been sending unsecured and secured forms out, to test.
    The problem I have now is, when I receive my permissions protected, secured forms back, I cannot EXPORT the data.  Both  the "Export" and "Archived" buttons are greyed out, and even when I remove the security settings from File--> Portfolio Properties, nothing changes.
    I'm locked out of the collected data!
    It's easy to export data from unsecured response forms (without permissions protection), but I would prefer to limit the amount of manipulation users can do to the forms (aside from commenting, filling them out, and signing them).
    The secured forms perform great on the Acrobat Reader - user (form-filler) end, restricting printing, modifying text, etc,  but they return to me in Acrobat Pro inert.  I'm completely stumped to how I can get data out of them. I would sure appreciate any help!
    Thanks,
    Chenster

    Please post in the LiveCycle Designer forum
    http://forums.adobe.com/community/livecycle/livecycle_es/livecycle_designer_es

  • Problems in Windows 8 creating PDF documents using Adobe Acrobat Pro 9.5.5

    I am running Windows 8 with the latest version of MS Office (version 14) and Adobe Acrobat Pro 9.5.5.  I was not having any problems making/printing PDF documents until about 30 days ago.  The only things that I can think of that have changed during this time period is 1) I updated my Office Suite to version 14 from the previous version and, most recently, 2) my Adobe Acrobat Reader program was automatically updated to the latest version.  I ended-up uninstalled Adobe Reader becuase the new program became my default for openning all Adobe PDF files, even when I tried to force my computer to use Adobe Acrobat Pro as the default (becuase doing so allows me to edit docments with features not available in the free Reader version).  When I go to print a Word document, for example, to Adobe Acrobat, the process stalls/stops at the point where you are supposed to choose a location to print/safe the new PDF document file.  All I get is the Save-As Screen with most of the buttons and folder tree blank (see example below).  After 5-10 seconds, "not responding" shows up in the title of the Save-As Screen and I have to click the "X" box in the upper right corner to abort.  This problem seems to have first started when trying to print pictures from the Windows picture viewer.  After a while long, I noticed that the same problem occured when printing from my internet browser (Firefox), but I coudl still print from Word or Excel.  Now, as of the last couple of days, I can't print from any program except the basic Paint software program.  I think this may actually be a Windows issue because when trying to toublshoot this problem, I re-installed Adobe Acrobat Pro and it did not help. I also tried making PDF documents using the free PrimoPDF software and had the exact same problem.  I have no idea where to go from here.  All I know is that I desperately need to create PDF documents and cannot!  Please help!!

    You're asking a lot of ancient Acrobat to work with an Office that never existed when it was made. "Just updated my office suite" is a massive change, and Window 8 didn't exist at that time either...

  • Adobe Acrobat Pro 9.2 blurry shadow problem

    Hi all,
    This problem is very strange and just happened to me last week.
    When I opened 1 PDF file, the problem didn't occured, but when I opened 2 or more PDF, this problem occured.
    This is the normal file
    Open this image to have visual picture : http://140.116.5.200/~tisa/adobe_error/test.jpg
    But after I scroll the PDF file (using the scroll in the right side) and then stop, slowly but sure, the PDF screen and font start to get blurry and blurry (you can see there is a diagonal line from upper left to the bottom right screen, the left screen is blurrer than the right screen)
    Open this image2 to have visual picture : http://140.116.5.200/~tisa/adobe_error/test2.jpg
    And if I highlight some of the text and scroll the mouse down, the screen will become unbelieable blurry, just like this.
    Open this image3 to have visual picture : http://140.116.5.200/~tisa/adobe_error/test3.jpg
    Thank you so much in advanced for helping... Already looking the answer for several days without any solution.
    What should I do ?
    NB : I have try to uninstall and install this software but it still happened.
    NB2 : I tried to install Acrobat Reader (free) and I got the same problem
    NB3 : I changed my Adobe CS4 to CS5 several weeks agao. I don't know if this is the problem.

    So.. If we want to control the "hardware graphics acceleration", should it be done inside the Adobe Acrobat Pro ?
    If yes, which part of option should we changed ?
    If not, can someone tell me which way to setting this one ?
    Do anybody have other input ? This problem makes me crazy
    Thank you so much in advanced.

  • Adobe Acrobat Pro 9 problem

    Software:Adobe Acrobat Pro 9 problem
    Issue: Whenever the end-user runs the PDF maker in Word 2003, it converts the file fine but when you close the PDF and return to the Word document, it shows the progress bar is still working to create the PDF.
    Related? In the Event System log, an error for SidebySide with the Event IDs of 32 and 59. I couldn't determine if these errors relate to each other.
    System: Windows XP Professional, sp3

    use the below link:
    Downloadable installation files available:
    Suites and Programs:  CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
    Acrobat:  XI, X | 9,8 | 9 standard
    Premiere Elements:  13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
    Photoshop Elements:  13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
    Lightroom:  6| 5.7.1| 5 | 4 | 3
    Captivate:  8 | 7 | 6 | 5.5, 5 | 1
    Contribute:  CS5 | CS4, CS3 | 3,2
    FrameMaker:  12, 11, 10, 9, 8, 7.2
    Download and installation help for Adobe links
    Download and installation help for Prodesigntools links are listed on most linked pages.  They are critical; especially steps 1, 2 and 3.  If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

  • I purchased CS6 and had problems with the Adobe Acrobat Pro so i uninstalled and now need to reinstall but serial number wont work. How can i reinstall ONLY Adobe Acrobat Pro since its included in CS6?

    I purchased Design Standard CS6 the entire package. I downloaded and installed but I was continually having problems with Adobe Acrobat Pro. I tried updating to the newest version but it only made the problems worse (acrobat was super slow and constantly not responding). So i decided to try to uninstall and then reinstall the program. Well I uninstalled, and then attempted to reinstall ONLY the adobe acrobat pro but it says my serial number (which is for design standard) will not work. Since Acrobat Pro is included in the suite, i thought this wouldnt be a problem. Is there anyway to get around this without uninstalling the entire design standard and reinstalling everything? I only need to reinstall acrobat pro.

    You need to reinstall Acrobat the the Creative Suite, you cannot download it is a separate application and install it that way because it will be looking for a serial number relative to being a singly purchased application.

  • Printing problem in Acrobat Pro

    Hello all.
    I have acrobat pro CS4 and have just made this my default from Preview as I am finding print output from preview is really bad.
    However I am having an issue in Pro.
    I cannot seem to make it understand the dimensions my printer can goto. I have a phaser 8550 which can print to within 8mm of the edge of the paper (A4)
    Now if I tell it to reduce to fit and print it will print with the bottom edge being a good inch from the edge. If I tell it not to reduce then it will print to within the 8in, but of course the image is cropped.
    Is there anyway to get this right?

    You say you're using Verdana but you're not. The error message clearly shows you're using MyriadPro Bold.
    You probably recently installed the Mac OS X 10.6.7 update which has a bug with OpenType PostScript fonts like MyriadPro Bold. Either use Verdana or another TrueType or PostScript font, or revert to Mac OS X 10.6.6.
    Read about the problem here: http://www.tidbits.com/article/12078

  • Problem with Adobe Acrobat Pro Extended version 9.3.4 reading Inventor 2009

    I would like to be able to generate 3D PDF files from Autodesk Inventor CAD models (e.g. .iam files) using Adobe Acrobat Pro Extended.  I am constrained to use Inventor 2009.  When I originally installed Acrobat Pro Extended, I was able to make this work after installing the IMPORT3D update at:
    http://www.adobe.com/support/downloads/detail.jsp?ftpID=4073
    Recently (9/5/2010), I updated Acrobat Pro Extended to version 9.3.4.  I believe that following that update, I lost the ability to read in Inventor 2009 files.  Acrobat Pro Extended now gives the error messages:
    "Exception has been raised" followed by:
    "Acrobat could not open 'file' because it is either not a supported file type or because the file has been damaged (for example, it was sent as an email attachment and wasn't correctly decoded).  To create an Adobe PDF document, go to the source application. Then print the document to Adobe PDF."
    This is exactly what happened when I first installed Acrobat Pro extended and before I installed the IMPORT3D update mentioned above.  I tried re-installing that update but now the installer gives the error message:
    "No qualifying products found to apply this update."
    Note that Inventor 2009 does allow one to "Save Copy As" to PDF format, but this just creates a 2D PDF snapshot of the current model view -- same for print to pdf.
    I suppose one thing to try is removing Acrobat Pro Extended and then re-installing without the 9.3.4 update, but with the IMPORT3D update -- but if that is necessary, then I won't be able to take advantage of any further updates (e.g. security updates) to Acrobat, which seems like a bad situation.
    Has anyone else had this problem? Or is it just me?

    I may have figured out what was causing my problem with conversion of Inventor 2009 to 3D PDF.  After playing around with a number of inventor files, I discovered that the conversion worked fine when there were no references to external files.  For example a .ipt file (part file) seemed to convert fine.  I believe the problem was that on the form one obtains with Edit->Preferences->Convert to PDF->Autodesk Inventor->Edit Settings->Import->Assembly, the check box for "use root file directory" was NOT checked.  Oddly, this is the default and I'm pretty sure I tried setting the conversion options to the default.  In any case, I now seem to be able to perform the conversion of Inventor 2009 to 3D PDF so this problem is solved I guess.

Maybe you are looking for