ACS 3.0 External dbase error

Once in a while, we have to restore from backup the config. We get the message " An error has occured while processing the External Database Configruation Page because an internal error"
What log file can tell me what happens when the error occured.
Johann folkestad

I think I've corrected the problem. Was the strangest thing. I was interfacing with the admin pages using Firefox and apparently, even though I typed the same secret key, ff was encrypting the key wrong. I viewed the same page in IE and got bizzar I think I've corrected the problem. Its the strangest thing. I was interfacing with the admin pages using Firefox and apparently, even though I typed the same secret key, ff was encrypting the key wrong. I viewed the same page in IE and saw bizarre characters in the key field. Retyped it and the error went away.
I had switched to using generic LDAP because I was seeing this same problem using WindowsNT/2000. I switched back to WindowsNT/2000 and am no longer seeing the problem their either. However, I am seeing
Attempting authentication for Unknown User 'testuser'
External DB [NTAuthenDLL.dll]: Starting authentication for user [testuser]
ttempting NT/2000 authentication
External DB [NTAuthenDLL.dll]: NT/2000 authentication SUCCESSFUL (by BDC-NS2)
External DB [NTAuthenDLL.dll]: Obtaining RAS information for user testuser from BDC-NS2
External DB [NTAuthenDLL.dll]: RasAdminUserGetInfo returned error 0x78
External DB [NTAuthenDLL.dll]: Failed to get RAS information for user testuser from BDC-NS2
Having some problems resolving this problem anyone got a suggestion?

Similar Messages

Error when loggong on for external ID "": Error during SAML 2.0 logon

Hi,
I'm getting be below error when trying to use SAML SSO for a ABAP Webdynpro page on a NW 7.4 system. When I access the page, it redirects to the identity provider, comes back to the page and it shows the logon page. I'm looking for any ideas of things I could look at.
N SAML20 SP (client 400): Incoming Response
N SAML20 Binding:          POST
N SAML20 IdP Name:         http://xxxxxx/adfs/services/trust
N SAML20 Status Code:      urn:oasis:names:tc:SAML:2.0:status:Responder
N SAML20 SP (client 400): Default ACS endpoint: https://xxxxxx/sap/saml2/sp/acs/400 , old default ACS endpoint
N SAML-Trace: CALL 'SAML login': SY-SUBRC = 222 , PWDCHG = 0
N *** ERROR => SAML-Trace: Path = /sap/bc/webdynpro/sap/oauth2_authority [sign.c       16519]
N {root-id=005056AD26DF1ED4B69880FF4BE51F68}_{conn-id=005056AD26DF1ED4B69880FF4BE53F68}_1
N *** ERROR => SAML-Trace: Returncode = 222 [sign.c       16519]
N *** ERROR => SAML-Trace: Message class = SAML number = 011 [sign.c       16519]
N *** ERROR => SAML-Trace: Message = Error when logging on for external ID "": Error during SAML 2.0 logon [sign.c       16519]
I have updated the service to use alternate logon procedure and added the handler CL_HTTP_EXT_SAML20
I have added the identity provider through transaction SAML2, but it does not seem to be working.
Here is a decrypted SAML assertion:
<samlp:Response ID="_9c844d84-8117-4851-8270-aeb12e935daf"
Version="2.0"
IssueInstant="2015-04-02T00:21:06.477Z"
Destination="https://xxxxxxxxx/sap/saml2/sp/acs/400"
Consent="urn:oasis:names:tc:SAML:2.0:consent:unspecified"
InResponseTo="S005056ad-26df-1ed4-b699-c4c630853f68"
xmlns:samlp="urn:oasis:names:tc:SAML:2.0:protocol"
>
<Issuer xmlns="urn:oasis:names:tc:SAML:2.0:assertion">http://xxxxxxxx.com/adfs/services/trust</Issuer>
<ds:Signature xmlns:ds="http://www.w3.org/2000/09/xmldsig#">
<ds:SignedInfo>
<ds:CanonicalizationMethod Algorithm="http://www.w3.org/2001/10/xml-exc-c14n#" />
<ds:SignatureMethod Algorithm="http://www.w3.org/2001/04/xmldsig-more#rsa-sha256" />
<ds:Reference URI="#_9c844d84-8117-4851-8270-aeb12e935daf">
<ds:Transforms>
<ds:Transform Algorithm="http://www.w3.org/2000/09/xmldsig#enveloped-signature" />
<ds:Transform Algorithm="http://www.w3.org/2001/10/xml-exc-c14n#" />
</ds:Transforms>
<ds:DigestMethod Algorithm="http://www.w3.org/2001/04/xmlenc#sha256" />
<ds:DigestValue>08HK08VLpJC23JoQs+p+oHbDBvjRF+9NwBeowmlFTrY=</ds:DigestValue>
</ds:Reference>
</ds:SignedInfo>
<ds:SignatureValue>xxxxxxx</ds:SignatureValue>
<KeyInfo xmlns="http://www.w3.org/2000/09/xmldsig#">
<ds:X509Data>
<ds:X509Certificate>MIIFPjCCBCagAwIBAgIHAMFKH58TFzANBgkqhkiG9w0BAQsFADCBtDELMAkGA1UEBhMCVVMxEDAOBgNVBAgTB0FyaXpvbmExEzARBgNVBAcTClNjb3R0c2RhbGUxGjAYBgNVBAoTEUdvRGFkZHkuY29tLCBJbmMuMS0wKwYDVQQLEyRodHRwOi8vY2VydHMuZ29kYWRkeS5jb20vcmVwb3NpdG9yeS8xMzAxBgNVBAMTKkdvIERhZGR5IFNlY3VyZSBDZXJ0aWZpY2F0ZSBBdXRob3JpdHkgLSBHMjAeFw0xNDAxMjMxOTM3MThaFw0xNzAxMjMxOTM3MThaMEIxITAfBgNVBAsTGERvbWFpbiBDb250cm9sIFZhbGlkYXRlZDEdMBsGA1UEAxMUZnNwcm94eTItZGV2LmlndC5jb20wggEiMA0GCSqGSIb3DQEBAQUAA4IBDwAwggEKAoIBAQDAM13/bboldFRmDGK3QBbxlDREoGuQEUWeroZCDM/tH7Rk+AjgXbc4pkon13EwKi7q9brzkBMCY3HH9Ep2BUHjopydy+AWQH9vjLK2wXD/+6T4FCG1i8Kt+lRrcxRWUugnBuK+BRgxEJDz7ap8KvcRk6ERWQrx5Co8K7ey5nEqjapCDJQg3Yrkxo2pEWGBKSIXXmpU+CgK03y4HOW19/rmdcyLThjchn+Jgxe8obL4tiVk4D/X36wOqtV/1cnIjGak/px/p1oQEGD5PC7F3FIZConhUu7PJDLmioqdGcimZvFiZK6xQJyzy90lm0dHRT1qhkC9TTsGvAAMCh/gn41xAgMBAAGjggHEMIIBwDAPBgNVHRMBAf8EBTADAQEAMB0GA1UdJQQWMBQGCCsGAQUFBwMBBggrBgEFBQcDAjAOBgNVHQ8BAf8EBAMCBaAwNgYDVR0fBC8wLTAroCmgJ4YlaHR0cDovL2NybC5nb2RhZGR5LmNvbS9nZGlnMnMxLTExLmNybDBTBgNVHSAETDBKMEgGC2CGSAGG/W0BBxcBMDkwNwYIKwYBBQUHAgEWK2h0dHA6Ly9jZXJ0aWZpY2F0ZXMuZ29kYWRkeS5jb20vcmVwb3NpdG9yeS8wdgYIKwYBBQUHAQEEajBoMCQGCCsGAQUFBzABhhhodHRwOi8vb2NzcC5nb2RhZGR5LmNvbS8wQAYIKwYBBQUHMAKGNGh0dHA6Ly9jZXJ0aWZpY2F0ZXMuZ29kYWRkeS5jb20vcmVwb3NpdG9yeS9nZGlnMi5jcnQwHwYDVR0jBBgwFoAUQMK9J47MNIMwojPX+2yz8LQsgM4wOQYDVR0RBDIwMIIUZnNwcm94eTItZGV2LmlndC5jb22CGHd3dy5mc3Byb3h5Mi1kZXYuaWd0LmNvbTAdBgNVHQ4EFgQUMRTW5O0fpR4kET2ED84QAS6ZXBowDQYJKoZIhvcNAQELBQADggEBAKCQfnSSA1gs6qyYKqAqQKhhRRhC4wMtZJLZUmMGPe2q+QM4dQxJgrFy2OVG6I4dXFrxINGlPdJVVXBKtLn9Fm2t0Cb8lAV3rLruEfRJTDK6MeDFOD5qXgU4higpuDGrAmqKvMIOk7VJA0gPbW4lasgqGQXzOspZCmCIWwOqcIDZRr0wo09QLidegr/phjZMzuy8IO0U1w7U6MX767qcl3RGcqRwpquMtMiaw5ROx9v3DK3JOemlqQwKy/uzzBohzYln6AYim8cnZMvfaKDLYNwE0+Rg6nmemlf6PXOjE3Uisc71v3uFstWsXzUPhDeQlycFzPDT4t4srIaxdMrEs3w=</ds:X509Certificate>
</ds:X509Data>
</KeyInfo>
</ds:Signature>
<samlp:Status>
<samlp:StatusCode Value="urn:oasis:names:tc:SAML:2.0:status:Responder">
<samlp:StatusCode Value="urn:oasis:names:tc:SAML:2.0:status:NoPassive" />
</samlp:StatusCode>
</samlp:Status>
</samlp:Response>

Hi Brian,
I am not sure but you could check below thread and couple of sap note.
Single Sign On - Sharepoint 2010 to SAP using ADFS
1799402 - Automatic account creation for SAML 2.0 SP
1257108 - Collective Note: Analyzing issues with Single Sign On (SSO)
It may help you to resolve / identify the cause of the issue.
BR
AKJ

"Auth type not supported by External DB" error for web-auth SSIDs

Hello
We're having a problem with web-authentication on our 4404/WisM controllers since we moved to software rev 5.x (currently running 5.1.151.0).
With software rev 4.x our web-auth SSIDs would send the authentication requests to a Cisco ACS4.0 which would then authenticate the users against MS Active directory.
Now (with rev 5.x) the same SSIDs cannot authenticate users against AD, the error in the ACS is:
Auth type not supported by External DB
Found the following Cisco Doc regarding the problem: Cisco Secure ACS and Windows AD EAP/802.1x port authentication fails with the Auth type not supported by External DB error message - Case Number K24308566. Done a packet capture on ACS to see authentications coming in and the ones that fail with above error are using CHAP - from the Cisco documentation, MS AD doesn't support CHAP.
Any ideas on how I can get the web-auth working again with software rev 5.x ?
Thanks
Andy

my apologies - theres a setting under Controller - General for Web Radius Authentication. changed this from CHAP to PAP and its now working ok.

IMac G5 won't boot, external interrupt error

I started my iMac G5 and did get the chime but it automatically goes into OF mode. The fans run loudly and it continously scrolls an "external interrupt" error with a bunch of jargon that goes by so fast I can't read it.
I tried resetting SMU, none of the bootup key sequences work, I can't boot from disk and it won't go into target disk mode. I've searched online "external interrupt" which has been an issue for others, but haven't found an answer to the problem yet.
I just tried resetting SMU again. This time I got the chime again, but now have a black screen. After about 30 seconds of nothing the fans start running and the screen remains black. Help please!

Worth trying a few more times:
Resetting the SMU on a G5 iMac:
http://support.apple.com/kb/HT1767
and on resetting the PMU on a Power Mac G5, G4 and G3 :
http://support.apple.com/kb/HT1939?viewlocale=en_US
http://support.apple.com/kb/HT1436

XML parsing error: xml processing instruction not at start of external entity (error code 17)

I created a form and recieve the filled in form by email from participants. It has always worked in the past. Recently when importing data into the master form (from filled in forms in xml files sent by applicants) I am getting this error message..."xml processing instruction not at start of external entity (error code 17), line 2, column 1...." pointing to the file of data (xml) I am trying to input. If I pull up old data forms (from 2009) they work, but now I am getting this error. I run Adobe Design Premium CS3 for Windows. Can anyone tell me what to do to fix?

I created a form and recieve the filled in form by email from participants. It has always worked in the past. Recently when importing data into the master form (from filled in forms in xml files sent by applicants) I am getting this error message..."xml processing instruction not at start of external entity (error code 17), line 2, column 1...." pointing to the file of data (xml) I am trying to input. If I pull up old data forms (from 2009) they work, but now I am getting this error. I run Adobe Design Premium CS3 for Windows. Can anyone tell me what to do to fix?

ACS External DB Error

Greetings Everyone,
I am having an issue with an ACS unit that has been in service for about a year. It was setup by a contractor to hook into AD. I am not that familiar with it it but the issue is we added a new network tech that is a member of the correct AD group. How ever when the user attempts to login he is denied and I see an error in the ACS log stating "unknow user or password in external DB" or something to that effect.
I looked into the configurations for the external DB and it shows no agent status. I guess my question is are there agents that need to be installed on the DC or is there something else I need to check?
One other think my account was in place at the time the ACS was installed and I have never had an issue with logging in. Its almost like the ACS does not know that a new user was created and or not syncronizing to the AD.
Any help would be appreciated
mike

Hi Tarik,
Per the bug you mentioned:
Toggle nic" command changes AAA server ip address to "127.0.0.1" in GUI.
Symptom:The ACS SE appliance IP address shows up as 127.0.0.1 on the ACS GUI.
Conditions:This occurs after issuing the "toggle nic" command, or by unplugging the ACS SE appliance from the network.
Workaround:The original IP address on the appliance can be restored with the "set ip" command
We have not changed anything, nor executed any command...anyways where do I need to check IP in GUI?
Thanks.

User authentication in Cisco ACS by adding external RADIUS database

Hi,
I would like to configure the below setup:
End user client (Cisco Any connect/VPN client) -> ASA 5500 (AAA client) -> ACS server -> External RADIUS database.
Here ACS server would send the authentication requests to External RADIUS server.So, i have added the external user database (RADIUS token server) in
ACS under External databases.I have added AAA client in Network configuration (selected authenticate using RADIUS(VPN 3000/ASA/PIX 7.0) from the drop down.
Here how do i make ASA recognize that it has to send the request to ACS server. Normally when you use ACS as RADIUS server you can add an AAA server in ASA and test it.But here we are using an external RADIUS server which has been configured in ACS, so how do i make ASA to send the requests to ACS server?
Any help on this would be really grateful to me.
Thanks and Regards,
Rahul.

Thanks Ajay,
As you said nothing needs to be done on ASA side, if we are using an external user database for authentication.
Im a newbie to ACS and this is the first time i'm trying to perform a two factor authenticaton in Cisco ACS using external user database.
By two factor authentication i mean, username + password serves as first factor (validated by RADIUS server), username + security code (validated by RADIUS server) serves as second factor.So, during user authentication i enter only username in username field and in "password" field i enter both "password + security code". Our RADIUS server has already been configured with AD as user store, so we dont have to specify AD details in ACS. I have done the following in ACS to perform this two factor authentication.
-> In external user databases, i have added a external RADIUS token server.
-> In unknown user policy , i have added the external data base that i configured in ACS into the selected databases list.
-> under network configuration, i have added the Cisco ASA as AAA client (authenticate using RADIUS (Cisco VPN 3000/ASA/PIX 7.x+)).
Just to check whether user authentication is successful, i launched the ACS webVPN using https://IP:2002, it asked me to enter username and password. So, i entered username and in password field i entered "password + security code". But, the page throws an error saying "login failed...Try again".I cant find any logs in external RADIUS server.
Here is what i found in "Failed attempts" logs under Reports and activities.
Date,Time,Message-Type,User-Name,Group-Name,Caller-ID,Network Access Profile Name,Authen-Failure-Code,Author-Failure-Code,Author-Data,NAS-Port,NAS-IP-Address,Filter Information,PEAP/EAP-FAST-Clear-Name,EAP Type,EAP Type Name,Reason,Access Device,Network Device Group
02/28/2012,00:31:52,Unknown NAS,,,,(Unknown),,,,,10.204.124.71,,,,,,,
02/28/2012,00:41:33,Unknown NAS,,,,(Unknown),,,,,10.204.124.71,,,,,,,
02/28/2012,00:42:18,Unknown NAS,,,,(Unknown),,,,,10.204.124.71,,,,,,,
Filtering is not applied.
Date
Time
Message-Type
User-Name
Group-Name
Caller-ID
Network Access Profile Name
Authen-Failure-Code
Author-Failure-Code
Author-Data
NAS-Port
NAS-IP-Address
Filter Information
PEAP/EAP-FAST-Clear-Name
EAP Type
EAP Type Name
Reason
Access Device
Network Device Group
02/28/2012
00:42:18
Unknown NAS
(Unknown)
10.204.124.71
02/28/2012
00:41:33
Unknown NAS
(Unknown)
10.204.124.71
02/28/2012
00:31:52
Unknown NAS
Am i missing any thing in configuration side with respect to ACS?
Thanks

Cannot delete files from external HD error code-50

I keep getting error code-50 when trying to delete a file from my external HD (western digital). I've restarted everything, it is not a special character problem. I have been using this HD for about a year and this problem just recently started. Also I cannot run disk utility verify because the HD does not show up in disk utility. Not sure if it ever did but I never had problems until now.

beecazz wrote:
Also I cannot run disk utility verify because the HD does not show up in disk utility.
That sounds like cause for concern, but I don't know whether it's connected with the -50 error.
Do you have backup to restore from if things take a turn for the worse?
For the deleting problem you could look at the following link. Trash It! seems to solve many Trash problems:
http://www.thexlab.com/faqs/trash.html

ACS 5.3 incremental backup error

Hi ,
I have ACS 5.3 that recently having problems with the incremental backup.
The error is : on demand back failed
and the details is: SQL Anywhere backup utility connection error: insufficient system resources- failed to allocate a SYSV semphorenull .
I mean come on.... and I did not find this error on cisco website.
The ADE.log file is not showing errors/details related to this. Atttached are the files showing the errors
Have anyone faced this problem before? Ideas? Anything?
Regards,
George

Hi George:
with 5.3 I experienced many issues including the incremental backup does not work. whenever I set it to "ON" next time the scheduled backup comes It fails and set itself back to "Off'. I did not get same message you get though.
I finally did two things:
- upgraded to latest patch.
- moved the log collector from the primary to the secondary.
Now things are fine for about 1 month without issues.
Regarding your issue, I think it could be related to resource issue as mentioned in the message.
What is the current DB size that you have?
Note that the message is misleading (messages I got with my ACS are the same) because they mention incremental backup in the message title and then say on-demand full backup failed!
So, you have to specify yourself if the issue with the incremental backup or the full backup?
HTH
Amjad
Rating useful replies is more useful than saying "Thank you"

Unable to open external list : Error : Unable to render the data. If the problem persists, contact your web server administrator.

Hi,
Please note we are using SQL Server 2008 for sharepoint. Does it matter for this issue?
Please help.
Thanks.

Hi,
According to your post, my understanding is that you failed to open external list.
Please change the External Content’s connection properties’ Authentication Mode to BDC identity.
Then launch the SharePoint 2013 Management Shell and run the PowerShell commands to remove the error.
Here is a similar thread for your reference:
http://social.msdn.microsoft.com/Forums/sharepoint/en-US/69d937e6-f4a3-40e0-b57f-67cddb4ed12e/sharepoint-2013-unable-to-render-the-data-if-the-problem-persists-contact-your-web-server?forum=sharepointcustomization
Best Regards,
Linda Li
Linda Li
TechNet Community Support

External Table Error

While Creating an external table I got following error
ORA-29913: error in executing ODCIEXTTABLEOPEN callout
ORA-29400: data cartridge error
KUP-00554: error encountered while parsing access parameters
KUP-01005: syntax error: found "missing": expecting one of: "badfile, byteordermark, characterset, column, data, delimited, discardfile, disable_directory_link_check, exit, fields, fixed, load, logfile, language, nodiscardfile, nobadfile, nologfile, date_cache, processing, readsize, string, skip, territory, varia¿gÀ"
KUP-01007: at line 2 column 14
ORA-06512: at
My CREATE TABLE Syntax is as follow
CREATE TABLE APPL_NOTE_EXT
CUS_ID NUMBER(10),
TEXT VARCHAR2(2000 ),
PAGE_NUM NUMBER(3)
ORGANIZATION EXTERNAL
( TYPE ORACLE_LOADER
DEFAULT DIRECTORY EXT_TABLE
ACCESS PARAMETERS
RECORDS DELIMITED BY newline
MISSING FIELD VALUES ARE NULL
FIELDS
CUS_ID POSITION (2:10) ,
TEXT POSITION (39:1737),
PAGE_NUM POSITION (13:14)
LOCATION ('APPNOTES.TXT')
REJECT LIMIT Unlimited
NOPARALLEL
NOMONITORING;

This is the result I obtained after creating the table with your script:
Table created.
SQL> desc APPL_NOTE_EXT
Name                                      Null?    Type
CUS_ID                                             NUMBER(10)
TEXT                                               VARCHAR2(2000)
PAGE_NUM                                           NUMBER(3)The only issue I faced was the directory object. I had to create it. May be you don't have privileges on the specified ext_table directory. Please verify.
~ Madrid

Release of External Activities - Error

Hi all,
I am trying to release few external activities for which Info Rec field is present. I have entered all the external purchasing parameters for the external activity like Vendor, Purchasing Group, Material Group, Info Rec but it is giving me the error while releasing the external activities:
"Procurement w/o material from vendor with plant assignment not defined".
Then when i click on tick button again i get one message stating "Purchase Requisition cannot be generated for this activity"
My requirement is that when i release this external activities, it should generate a purchase requisition. I have set the Purchase Req. field to "After Release" as well but still it is not working.
Can anyone please help me with this. Hope to hear from you all.
Kind Regards,
Mayuresh Ayachit.

Hi Ramesh,
You are right. But my requirement was when you enter Info Rec purchasing data like Vendor, Material group is copied into your external activity. Then you set the Purchase Req field to "After Release" and when you release the external activity, a Purchase Requistion is generated.
But when i do this i get the error as i described before. I tried doing what you said and that works. I have one more question for you. Do you know what the system status "EOPD" (External Operation Partially Delivered) means. What is the significance of this status and when do you get it?
Regards,
Mayuresh Ayachit.

Copying Files To/From External Drive: Error -36

I recently purchased a WD 700 GB drive that I'm using as a network drive using AirportExtreme. Today, while trying to copy files from either of my internal drives to the WD drive, I get error -36 messages. If I'm copying a folder of files and click on the option "skip" after receiving an error message for a particular file then the entire copy transaction aborts. I have taken the following steps:
1) Disconnected WD from netywork and connected it directly to my G5.
2) Ran Disk Utilities and got 1 error on 1 of the 3 partitions which was repaired.
3) Re-ran Disk Utilities and got no error.
Tried moving folders of files and groups of files from WD to G5 and received same error -36 message.
Tried moving folders of files and groups of files from G5 to WD and received same error -36 message. Cannot move even a single file - of ANY size - w/o getting error -36 message.
4) Checked permissions and "ignore ownership" settings on volumes concerned then logged in under root.
Same problem continues. Tried moving files between my internal drives - no problem. Now here's the thing: the only files I have moved to the WD drive thus far are my music files. The iTunes Library on my G5 is pointed at an iTunes folder with these files inside. Last 2 weeks or so there's been no problem.
I NEED TO GET THESE MUSIC FILES OFF or COPIED or BURNED to another disk. In that vein I tried:
5) Unsuccessfully creating an image file of the files on the WD but always ended up with a much too small and empty .dmg file.
6) Burning files to DVD - same error -36 messages.
7) Repaired permissions on my G5 - just 'cause. No help.
8) Re-ran Disk Utilities on WD: repairs not needed.
9) Re-booted; error -36 messages continue to pop up.
I'm at a loss as to what to do and am especially peeved because I bought the WD at the suggestion of a clerk at the Apple Store even after I pointed out to him that the WD was getting very mixed reviews on Apple's site. I'm not angry with the clerk but at myself for purchasing the WD even with my misgivings.
How can I copy to another disk the ONLY copy of my music files from the WD drive so I can either reformat or return it?
Dual 2 GHz G5, 17" MacBook Pro, MacMini, Apple iPhone Mac OS X (10.4.10) 2 Apple 20" Cinema Display, Proview 17" display, External Acomdata Disk Drive

A couple of ideas:
1. Do you have an iSight camera or an iPod connected to another Firewire port? If so, unplug them so that the only Firewire device is the drive.
2. Unplug everything except the keyboard and mouse and download and reapply the 10.4.10 COMBO update. Make sure no other program is running when you apply the update, and do nothing whatsoever until the update finishes.
3. Have you tried plugging the drive into another computer to see if it works? If so, copy files off on the other computer and burn them from there.
4. Does your iTunes work and access the files? Have you tried creating CDs from iTunes?
If all else fails and you have a spare drive slot in the G5 that will take the type of drive in the enclosure, you could always try removing it from the enclosure and putting it into the G5 and see if it works there. The problem could be the innards of the drive enclosure rather than the drive itself.
Francine
Francine
Schwieder

Trying to backup my MacBook Pro onto my External Harddrive, error

I am trying to backup my Macbook Pro onto my External harddrive (the same one I always do), and for some reason all of the sudden I get the error message that says that the backup disk is not available. When I click on the time machine icon at the top it just says that the latest back up is just delayed. What should I do?

Your query strongly suggests that you are using thiis particular HHD for Time Machine backups. It seems that your MBP simply is not recognizing the HDD.
When connected it should appear on you desktop.
If it does not, I would connect another HDD to determine if there is an issue with the Time Machine drive. If another drive is recognized then use the same USB cord with the Time Machine drive. If still no success, make an appointment with the Apple Store Genius bar and bring the drive along with your MBP.
Ciao.

Can't back-up MBP hard drive to external, getting errors

I am trying to back up my hard drive to an external (WD My Passport Essential SE) in Disk Utilities (after booting failed). Was getting error-61 until I changed the external format to Mac OS X compatible. But now I am getting an input/output error.
I'm probably going to need to erase my HD and reinstall Lion, so I HAVE to back-up. I really could use some guidance.

RoobeeLee wrote:
Well, FYI: turns out that it was all due to a bad hard drive (wouldn't mount?). So the HD was replaced, and a valuable lesson was learned: Back-Up before you have a problem! Thanks for your input.
Murphy, that infamous foe, does have the habit of showing up at the most inopportune of moments.
ds store wrote:
Use a powered USB hub with port powered drives.
https://discussions.apple.com/community/notebooks/macbook_pro?view=documents
Or use FW drives while you still can. MUCH better performance and since the FW bus has 1.5A available for the peripheral, vs the USB's 0.5A, can handle a wider range of buspowered drives, especially the terabyte monsters.

ACS 3.0 External dbase error

Similar Messages

Maybe you are looking for