ACS 4.1 replication error
Hi netPro,
when i start the replication that's an error ,
ACS Internal Database Replication Errors
Number Error
1 'User and Group Database' and 'Group Database' cannot be replicated together
what does it means ?
thanks.
regards,
Jack
Hi Jack,
Under database replication components, either select "user and group database" or "group database only"..You can't have both selected, as first option include the other..
regards
Hamid
Similar Messages
-
We recently upgraded to ACS 4.2. All works perfectly except for replication. I now receive an error
ACS Internal Database Replication Errors
1.To disable receiving of EAP-FAST replication component, "EAP-FAST master server" must be enabled on "Global Authentication Setup" page
We are not using EAP-FAST and it doen't appear to be enabled. EAP-FAST is not checked to replicate.I looked at that when I first got the issue. It saya that the server is Master. If I tick the box nothing changes and when I go back to that "Global Authentication" page the box is no longer ticked. The issue is the same on both the Primary Server and the Backup Server.
-
Customer Master replication error from R/3 to CRM
Experts,
I am trying to replicate Customer Master from R/3 to CRM.
All the settings have been done. Nothing shows up in Queues. However, Bdoc hangs in "Received" state.
When I try to reprocess the Bdoc, I get a prog dump of type DBIF_RSQL_INTERNAL_ERROR in below function module: CRM_BUPA_FRG0020_SAVE_TABS
at INSERT crmm_but_set0020 FROM TABLE it_set0020_insert[]
This data corresponds to Shipping data in Customer Master.
Can you please help? I saw a similar thread in the forum where there was a suggestion about R/3 plug in update. How can I do that?
Thanks in advance,
JDPls see Customer Master replication error
Closed. -
Replication error BP from CRM to R/3 - "Fill in all required entry Fields"
Dear Folks
I have maintained all steps mentioned in building block - C03. I have maintained separate account group approach. Made sure that number ranges are in sync in both the systems. Particularly in PIDE, mapping classification Consumer-Org 'A' to 'ZZ01' (Copy of 0001).
I changed all required entry to optional entry in my 'ZZ01' field status using OVT0.
But when i replicate using R3AS, i get an error 'Fill in all required entry Fields" - Error in receiving system (i.e R/3).
I tried manually creating customer in R/3 with the account group ZZ01. Surprisingly it does not allows me to save unless i give the reconcillation account entry, even though it is not a required field.
Please let me know for further details and Please help me to resolve this error. I am in real urgency.
Thanks
Keerthi
Chicago IL
507 401 1030Hi Karunakaran
Your reply answered my question of creating customer with no 'recon' a/c required entry. Thanks awarded 2 points.
My replication error is still hanging around. I found that It has no bearing on the 'Reconcillation A/c' required entry.
Some other field is still restricting my BP Role- Consumer:Organization to replicate. The error still showing as "required fields are not entered in R/3", even after suppressing "Reconcillation Account".
I think my reference customer master i created in R/3 using VD07 is not assigned in case of the account group Consumer:Organization.
But i don't know how to verify my doubts and get rid of this error.
Please help, in great urgency. -
I have been getting a pattern of errors on my DC. I have two pair of eyes on these errors, but everything seems to running ok. The only issue we've had is our workstations were putting out the "Trust domain relationship failed..." error. We were
able fix this issue by removing those machines from the domain, changing the names, and then adding them back. My only concern is that the errors below were the cause of that, and that the issue may return unless this is resolved. I've checked all of my services
and DNS's settings. IPv6 is on. There haven't been any changes to the server in sometime. Which is the baffling part. Any insight on this would be very helpful. I apologize in advance for not being well versed in this area... AD Replication is not my strongest
point.
Error 1
Log Name: Directory Service
Source: Microsoft-Windows-ActiveDirectory_DomainService
Date: 1/15/2015 9:16:53 AM
Event ID: 2092
Task Category: Replication
Level: Warning
Keywords: Classic
User: ANONYMOUS LOGON
Computer: LAHDC1.LAH
Description:
This server is the owner of the following FSMO role, but does not consider it valid. For the partition which contains the FSMO, this server has not replicated successfully with any of its partners since this server has been restarted. Replication errors are
preventing validation of this role.
Operations which require contacting a FSMO operation master will fail until this condition is corrected.
FSMO Role: CN=RID Manager$,CN=System,DC=LAH
User Action:
1. Initial synchronization is the first early replications done by a system as it is starting. A failure to initially synchronize may explain why a FSMO role cannot be validated. This process is explained in KB article 305476.
2. This server has one or more replication partners, and replication is failing for all of these partners. Use the command repadmin /showrepl to display the replication errors. Correct the error in question. For example there maybe problems with IP connectivity,
DNS name resolution, or security authentication that are preventing successful replication.
3. In the rare event that all replication partners being down is an expected occurance, perhaps because of maintenance or a disaster recovery, you can force the role to be validated. This can be done by using NTDSUTIL.EXE to seize the role to the same server.
This may be done using the steps provided in KB articles 255504 and 324801 on http://support.microsoft.com.
The following operations may be impacted:
Schema: You will no longer be able to modify the schema for this forest.
Domain Naming: You will no longer be able to add or remove domains from this forest.
PDC: You will no longer be able to perform primary domain controller operations, such as Group Policy updates and password resets for non-Active Directory Domain Services accounts.
RID: You will not be able to allocation new security identifiers for new user accounts, computer accounts or security groups.
Infrastructure: Cross-domain name references, such as universal group memberships, will not be updated properly if their target object is moved or renamed.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-ActiveDirectory_DomainService" Guid="{0e8478c5-3605-4e8c-8497-1e730c959516}" EventSourceName="NTDS General" />
<EventID Qualifiers="32768">2092</EventID>
<Version>0</Version>
<Level>3</Level>
<Task>5</Task>
<Opcode>0</Opcode>
<Keywords>0x8080000000000000</Keywords>
<TimeCreated SystemTime="2015-01-15T15:16:53.716341400Z" />
<EventRecordID>19509</EventRecordID>
<Correlation />
<Execution ProcessID="492" ThreadID="1088" />
<Channel>Directory Service</Channel>
<Computer>LAHDC1.LAH</Computer>
<Security UserID="S-1-5-7" />
</System>
<EventData>
<Data>CN=RID Manager$,CN=System,DC=LAH</Data>
</EventData>
</Event>
Error 2
Log Name: Directory Service
Source: Microsoft-Windows-ActiveDirectory_DomainService
Date: 1/15/2015 9:16:33 AM
Event ID: 2887
Task Category: LDAP Interface
Level: Warning
Keywords: Classic
User: ANONYMOUS LOGON
Computer: LAHDC1.LAH
Description:
During the previous 24 hour period, some clients attempted to perform LDAP binds that were either:
(1) A SASL (Negotiate, Kerberos, NTLM, or Digest) LDAP bind that did not request signing (integrity validation), or
(2) A LDAP simple bind that was performed on a cleartext (non-SSL/TLS-encrypted) connection
This directory server is not currently configured to reject such binds. The security of this directory server can be significantly enhanced by configuring the server to reject such binds. For more details and information on how to make this configuration
change to the server, please see http://go.microsoft.com/fwlink/?LinkID=87923.
Summary information on the number of these binds received within the past 24 hours is below.
You can enable additional logging to log an event each time a client makes such a bind, including information on which client made the bind. To do so, please raise the setting for the "LDAP Interface Events" event logging category to level 2
or higher.
Number of simple binds performed without SSL/TLS: 0
Number of Negotiate/Kerberos/NTLM/Digest binds performed without signing: 994
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-ActiveDirectory_DomainService" Guid="{0e8478c5-3605-4e8c-8497-1e730c959516}" EventSourceName="NTDS General" />
<EventID Qualifiers="32768">2887</EventID>
<Version>0</Version>
<Level>3</Level>
<Task>16</Task>
<Opcode>0</Opcode>
<Keywords>0x8080000000000000</Keywords>
<TimeCreated SystemTime="2015-01-15T15:16:33.350305000Z" />
<EventRecordID>19508</EventRecordID>
<Correlation />
<Execution ProcessID="492" ThreadID="692" />
<Channel>Directory Service</Channel>
<Computer>LAHDC1.LAH</Computer>
<Security UserID="S-1-5-7" />
</System>
<EventData>
<Data>0</Data>
<Data>994</Data>
</EventData>
</Event>
DCDIAG Results
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:\Users\Administrator.LAH>dcdiag.exe
Directory Server Diagnosis
Performing initial setup:
Trying to find home server...
Home Server = LAHDC1
* Identified AD Forest.
Done gathering initial info.
Doing initial required tests
Testing server: Default-First-Site-Name\LAHDC1
Starting test: Connectivity
......................... LAHDC1 passed test Connectivity
Doing primary tests
Testing server: Default-First-Site-Name\LAHDC1
Starting test: Advertising
......................... LAHDC1 passed test Advertising
Starting test: FrsEvent
......................... LAHDC1 passed test FrsEvent
Starting test: DFSREvent
......................... LAHDC1 passed test DFSREvent
Starting test: SysVolCheck
......................... LAHDC1 passed test SysVolCheck
Starting test: KccEvent
A warning event occurred. EventID: 0x8000082C
Time Generated: 01/15/2015 08:47:34
Event String:
A warning event occurred. EventID: 0x8000082C
Time Generated: 01/15/2015 08:47:53
Event String:
......................... LAHDC1 passed test KccEvent
Starting test: KnowsOfRoleHolders
......................... LAHDC1 passed test KnowsOfRoleHolders
Starting test: MachineAccount
......................... LAHDC1 passed test MachineAccount
Starting test: NCSecDesc
Error NT AUTHORITY\ENTERPRISE DOMAIN CONTROLLERS doesn't have
Replicating Directory Changes In Filtered Set
access rights for the naming context:
DC=ForestDnsZones,DC=LAH
Error NT AUTHORITY\ENTERPRISE DOMAIN CONTROLLERS doesn't have
Replicating Directory Changes In Filtered Set
access rights for the naming context:
DC=DomainDnsZones,DC=LAH
......................... LAHDC1 failed test NCSecDesc
Starting test: NetLogons
......................... LAHDC1 passed test NetLogons
Starting test: ObjectsReplicated
......................... LAHDC1 passed test ObjectsReplicated
Starting test: Replications
[Replications Check,LAHDC1] A recent replication attempt failed:
From LAHDC02 to LAHDC1
Naming Context: DC=ForestDnsZones,DC=LAH
The replication generated an error (8456):
The source server is currently rejecting replication requests.
The failure occurred at 2015-01-15 08:46:33.
The last success occurred at 2014-10-03 15:52:49.
2494 failures have occurred since the last success.
Replication has been explicitly disabled through the server
options.
[Replications Check,LAHDC1] A recent replication attempt failed:
From LAHDC02 to LAHDC1
Naming Context: DC=DomainDnsZones,DC=LAH
The replication generated an error (8456):
The source server is currently rejecting replication requests.
The failure occurred at 2015-01-15 08:46:33.
The last success occurred at 2014-10-03 15:52:49.
2494 failures have occurred since the last success.
Replication has been explicitly disabled through the server
options.
[Replications Check,LAHDC1] A recent replication attempt failed:
From LAHDC02 to LAHDC1
Naming Context: CN=Schema,CN=Configuration,DC=LAH
The replication generated an error (8456):
The source server is currently rejecting replication requests.
The failure occurred at 2015-01-15 08:46:33.
The last success occurred at 2014-10-03 15:52:49.
2494 failures have occurred since the last success.
Replication has been explicitly disabled through the server
options.
[Replications Check,LAHDC1] A recent replication attempt failed:
From LAHDC02 to LAHDC1
Naming Context: CN=Configuration,DC=LAH
The replication generated an error (8456):
The source server is currently rejecting replication requests.
The failure occurred at 2015-01-15 08:46:33.
The last success occurred at 2014-10-03 15:52:49.
3994 failures have occurred since the last success.
Replication has been explicitly disabled through the server
options.
[Replications Check,LAHDC1] A recent replication attempt failed:
From LAHDC02 to LAHDC1
Naming Context: DC=LAH
The replication generated an error (8456):
The source server is currently rejecting replication requests.
The failure occurred at 2015-01-15 08:46:33.
The last success occurred at 2014-10-03 16:24:02.
2664 failures have occurred since the last success.
Replication has been explicitly disabled through the server
options.
......................... LAHDC1 failed test Replications
Starting test: RidManager
......................... LAHDC1 passed test RidManager
Starting test: Services
......................... LAHDC1 passed test Services
Starting test: SystemLog
......................... LAHDC1 passed test SystemLog
Starting test: VerifyReferences
......................... LAHDC1 passed test VerifyReferences
Running partition tests on : ForestDnsZones
Starting test: CheckSDRefDom
......................... ForestDnsZones passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... ForestDnsZones passed test
CrossRefValidation
Running partition tests on : DomainDnsZones
Starting test: CheckSDRefDom
......................... DomainDnsZones passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... DomainDnsZones passed test
CrossRefValidation
Running partition tests on : Schema
Starting test: CheckSDRefDom
......................... Schema passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... Schema passed test CrossRefValidation
Running partition tests on : Configuration
Starting test: CheckSDRefDom
......................... Configuration passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... Configuration passed test CrossRefValidation
Running partition tests on : LAH
Starting test: CheckSDRefDom
......................... LAH passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... LAH passed test CrossRefValidation
Running enterprise tests on : LAH
Starting test: LocatorCheck
......................... LAH passed test LocatorCheck
Starting test: Intersite
......................... LAH passed test Intersite
C:\Users\Administrator.LAH>I see the following errors:
"The source server is currently rejecting replication requests."
"Replication has been explicitly disabled through the server options."
I would recommend starting with this MS KB which describes your problem: https://support.microsoft.com/kb/2023007?wa=wsignin1.0
Also, I would recommend that you follow the recommendations I shared in this Wiki: http://social.technet.microsoft.com/wiki/contents/articles/18513.active-directory-replication-issues-basic-troubleshooting-steps-single-ad-domain-in-a-single-ad-forest.aspx
This posting is provided AS IS with no warranties or guarantees , and confers no rights.
Ahmed MALEK
My Website Link
My Linkedin Profile
My MVP Profile -
Replication Error with Vendor Master Records
Hello,
We are trying to replicate vendor master records from R/3 to SRM via BBPGETVD. When we go to SLG1, there is an error stating Business Partner XXXX: Invalid Value 0003 for field Authorization Group.
Currently, the AP dept. maintains the field Authorization Group in the Vendor Master Record 'Control' screen with a fixed value of 0003 (LFA1-BEGRU). When the replication occurs, SRM complains that this field value does not exist in a SRM customizing table or is a fixed value.
Do we need to implement the BBP_TRANSDATA_PREP BAdI to pass this value as a fixed value to replicate vendors?
-regards
Shaz KhanI'm planning to implement bbp_transdata_prep. Wondering if either one of you can help. I've also opened another thread with my specific questions.
Replication Error with Vendor Master Records -
Replication Error between DC and PDC after a reboot.
Hi,
We have a very small server environment and having one DC and one ADC. Last week ADC got a sudden restart. After booting it shown one service failed error. Since then the ADC is not replicating with DC. Giving below the diagnosis
results of Dcdiag and FSMO check.
Domain Controller Diagnosis
Performing initial setup:
Done gathering initial info.
Doing initial required tests
Testing server: Default-First-Site-Name\DC
Starting test: Connectivity
......................... DC passed test Connectivity
Doing primary tests
Testing server: Default-First-Site-Name\DC
DNS Tests are running and not hung. Please wait a few minutes...
Running partition tests on : ForestDnsZones
Running partition tests on : DomainDnsZones
Running partition tests on : Schema
Running partition tests on : Configuration
Running partition tests on : bannaridc
Running enterprise tests on : bannaridc.com
Starting test: DNS
......................... bannaridc.com passed test DNS
Domain Controller Diagnosis
Performing initial setup:
* Verifying that the local machine backupdc, is a DC.
* Connecting to directory service on server backupdc.
* Collecting site info.
* Identifying all servers.
* Identifying all NC cross-refs.
* Found 2 DC(s). Testing 1 of them.
Done gathering initial info.
Doing initial required tests
Testing server: Default-First-Site-Name\BACKUPDC
Starting test: Connectivity
* Active Directory LDAP Services Check
* Active Directory RPC Services Check
......................... BACKUPDC passed test Connectivity
Doing primary tests
Testing server: Default-First-Site-Name\BACKUPDC
Starting test: Replications
* Replications Check
[Replications Check,BACKUPDC] A recent replication attempt failed:
From DC to BACKUPDC
Naming Context: DC=ForestDnsZones,DC=bannaridc,DC=com
The replication generated an error (1256):
The remote system is not available. For information about network troubleshooting, see Windows Help.
The failure occurred at 2014-05-15 12:29:41.
The last success occurred at 2014-05-12 09:23:27.
76 failures have occurred since the last success.
REPLICATION LATENCY WARNING
ERROR: Expected notification link is missing.
Source DC
Replication of new changes along this path will be delayed.
This problem should self-correct on the next periodic sync.
[Replications Check,BACKUPDC] A recent replication attempt failed:
From DC to BACKUPDC
Naming Context: DC=DomainDnsZones,DC=bannaridc,DC=com
The replication generated an error (1256):
The remote system is not available. For information about network troubleshooting, see Windows Help.
The failure occurred at 2014-05-15 12:29:41.
The last success occurred at 2014-05-12 09:33:40.
76 failures have occurred since the last success.
REPLICATION LATENCY WARNING
ERROR: Expected notification link is missing.
Source DC
Replication of new changes along this path will be delayed.
This problem should self-correct on the next periodic sync.
[Replications Check,BACKUPDC] A recent replication attempt failed:
From DC to BACKUPDC
Naming Context: CN=Schema,CN=Configuration,DC=bannaridc,DC=com
The replication generated an error (5):
Access is denied.
The failure occurred at 2014-05-15 12:29:41.
The last success occurred at 2014-05-12 09:23:26.
76 failures have occurred since the last success.
[Replications Check,BACKUPDC] A recent replication attempt failed:
From DC to BACKUPDC
Naming Context: CN=Configuration,DC=bannaridc,DC=com
The replication generated an error (5):
Access is denied.
The failure occurred at 2014-05-15 12:29:41.
The last success occurred at 2014-05-12 09:23:26.
76 failures have occurred since the last success.
REPLICATION LATENCY WARNING
ERROR: Expected notification link is missing.
Source DC
Replication of new changes along this path will be delayed.
This problem should self-correct on the next periodic sync.
[Replications Check,BACKUPDC] A recent replication attempt failed:
From DC to BACKUPDC
Naming Context: DC=bannaridc,DC=com
The replication generated an error (5):
Access is denied.
The failure occurred at 2014-05-15 12:29:42.
The last success occurred at 2014-05-12 09:42:25.
95 failures have occurred since the last success.
REPLICATION LATENCY WARNING
ERROR: Expected notification link is missing.
Source DC
Replication of new changes along this path will be delayed.
This problem should self-correct on the next periodic sync.
* Replication Latency Check
REPLICATION-RECEIVED LATENCY WARNING
BACKUPDC: Current time is 2014-05-15 13:24:11.
DC=ForestDnsZones,DC=bannaridc,DC=com
Last replication recieved from DC at 2014-05-12 09:23:27.
Latency information for 2 entries in the vector were ignored.
2 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's no longer replicating this nc. 0 had no latency information (Win2K DC).
DC=DomainDnsZones,DC=bannaridc,DC=com
Last replication recieved from DC at 2014-05-12 09:33:40.
Latency information for 2 entries in the vector were ignored.
2 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's no longer replicating this nc. 0 had no latency information (Win2K DC).
CN=Schema,CN=Configuration,DC=bannaridc,DC=com
Last replication recieved from DC at 2014-05-12 09:23:26.
Latency information for 2 entries in the vector were ignored.
2 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's no longer replicating this nc. 0 had no latency information (Win2K DC).
CN=Configuration,DC=bannaridc,DC=com
Last replication recieved from DC at 2014-05-12 09:23:26.
Latency information for 2 entries in the vector were ignored.
2 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's no longer replicating this nc. 0 had no latency information (Win2K DC).
DC=bannaridc,DC=com
Last replication recieved from DC at 2014-05-12 09:42:25.
Latency information for 2 entries in the vector were ignored.
2 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's no longer replicating this nc. 0 had no latency information (Win2K DC).
* Replication Site Latency Check
......................... BACKUPDC passed test Replications
Test omitted by user request: Topology
Test omitted by user request: CutoffServers
Starting test: NCSecDesc
* Security Permissions check for all NC's on DC BACKUPDC.
* Security Permissions Check for
DC=ForestDnsZones,DC=bannaridc,DC=com
(NDNC,Version 2)
* Security Permissions Check for
DC=DomainDnsZones,DC=bannaridc,DC=com
(NDNC,Version 2)
* Security Permissions Check for
CN=Schema,CN=Configuration,DC=bannaridc,DC=com
(Schema,Version 2)
* Security Permissions Check for
CN=Configuration,DC=bannaridc,DC=com
(Configuration,Version 2)
* Security Permissions Check for
DC=bannaridc,DC=com
(Domain,Version 2)
......................... BACKUPDC passed test NCSecDesc
Starting test: NetLogons
* Network Logons Privileges Check
Verified share \\BACKUPDC\netlogon
Verified share \\BACKUPDC\sysvol
......................... BACKUPDC passed test NetLogons
Starting test: Advertising
The DC BACKUPDC is advertising itself as a DC and having a DS.
The DC BACKUPDC is advertising as an LDAP server
The DC BACKUPDC is advertising as having a writeable directory
The DC BACKUPDC is advertising as a Key Distribution Center
Warning: BACKUPDC is not advertising as a time server.
......................... BACKUPDC failed test Advertising
Starting test: KnowsOfRoleHolders
Role Schema Owner = CN=NTDS Settings,CN=DC,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=bannaridc,DC=com
Role Domain Owner = CN=NTDS Settings,CN=DC,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=bannaridc,DC=com
Role PDC Owner = CN=NTDS Settings,CN=DC,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=bannaridc,DC=com
Role Rid Owner = CN=NTDS Settings,CN=DC,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=bannaridc,DC=com
Role Infrastructure Update Owner = CN=NTDS Settings,CN=DC,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=bannaridc,DC=com
......................... BACKUPDC passed test KnowsOfRoleHolders
Starting test: RidManager
* Available RID Pool for the Domain is 3107 to 1073741823
* DC.bannaridc.com is the RID Master
* DsBind with RID Master was successful
* rIDAllocationPool is 2607 to 3106
* rIDPreviousAllocationPool is 2607 to 3106
* rIDNextRID: 2771
......................... BACKUPDC passed test RidManager
Starting test: MachineAccount
Checking machine account for DC BACKUPDC on DC BACKUPDC.
* SPN found :LDAP/backupdc.bannaridc.com/bannaridc.com
* SPN found :LDAP/backupdc.bannaridc.com
* SPN found :LDAP/BACKUPDC
* SPN found :LDAP/backupdc.bannaridc.com/BANNARIDC
* SPN found :LDAP/bcbf105f-e755-4c24-b846-01d447834480._msdcs.bannaridc.com
* SPN found :E3514235-4B06-11D1-AB04-00C04FC2DCD2/bcbf105f-e755-4c24-b846-01d447834480/bannaridc.com
* SPN found :HOST/backupdc.bannaridc.com/bannaridc.com
* SPN found :HOST/backupdc.bannaridc.com
* SPN found :HOST/BACKUPDC
* SPN found :HOST/backupdc.bannaridc.com/BANNARIDC
* SPN found :GC/backupdc.bannaridc.com/bannaridc.com
......................... BACKUPDC passed test MachineAccount
Starting test: Services
* Checking Service: Dnscache
* Checking Service: NtFrs
* Checking Service: IsmServ
* Checking Service: kdc
* Checking Service: SamSs
* Checking Service: LanmanServer
* Checking Service: LanmanWorkstation
* Checking Service: RpcSs
* Checking Service: w32time
* Checking Service: NETLOGON
......................... BACKUPDC passed test Services
Test omitted by user request: OutboundSecureChannels
Starting test: ObjectsReplicated
BACKUPDC is in domain DC=bannaridc,DC=com
Checking for CN=BACKUPDC,OU=Domain Controllers,DC=bannaridc,DC=com in domain DC=bannaridc,DC=com on 1 servers
Object is up-to-date on all servers.
Checking for CN=NTDS Settings,CN=BACKUPDC,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=bannaridc,DC=com in domain CN=Configuration,DC=bannaridc,DC=com on 1 servers
Object is up-to-date on all servers.
......................... BACKUPDC passed test ObjectsReplicated
Starting test: frssysvol
* The File Replication Service SYSVOL ready test
File Replication Service's SYSVOL is ready
......................... BACKUPDC passed test frssysvol
Starting test: frsevent
* The File Replication Service Event log test
......................... BACKUPDC passed test frsevent
Starting test: kccevent
* The KCC Event log test
Found no KCC errors in Directory Service Event log in the last 15 minutes.
......................... BACKUPDC passed test kccevent
Starting test: systemlog
* The System Event log test
An Error Event occured. EventID: 0xC25A001D
Time Generated: 05/15/2014 12:30:20
(Event String could not be retrieved)
An Error Event occured. EventID: 0xC25A001D
Time Generated: 05/15/2014 12:49:04
(Event String could not be retrieved)
An Error Event occured. EventID: 0x40000004
Time Generated: 05/15/2014 12:53:20
Event String: The kerberos client received a
KRB_AP_ERR_MODIFIED error from the server
host/backupdc.bannaridc.com. The target name
used was
LDAP/bcbf105f-e755-4c24-b846-01d447834480._msdcs.bannaridc.com.
This indicates that the password used to encrypt
the kerberos service ticket is different than
that on the target server. Commonly, this is due
to identically named machine accounts in the
target realm (BANNARIDC.COM), and the client
realm. Please contact your system
administrator.
An Error Event occured. EventID: 0xC25A001D
Time Generated: 05/15/2014 13:12:19
(Event String could not be retrieved)
......................... BACKUPDC failed test systemlog
Test omitted by user request: VerifyReplicas
Starting test: VerifyReferences
The system object reference (serverReference)
CN=BACKUPDC,OU=Domain Controllers,DC=bannaridc,DC=com and backlink on
CN=BACKUPDC,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=bannaridc,DC=com
are correct.
The system object reference (frsComputerReferenceBL)
CN=BACKUPDC,CN=Domain System Volume (SYSVOL share),CN=File Replication Service,CN=System,DC=bannaridc,DC=com
and backlink on CN=BACKUPDC,OU=Domain Controllers,DC=bannaridc,DC=com
are correct.
The system object reference (serverReferenceBL)
CN=BACKUPDC,CN=Domain System Volume (SYSVOL share),CN=File Replication Service,CN=System,DC=bannaridc,DC=com
and backlink on
CN=NTDS Settings,CN=BACKUPDC,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=bannaridc,DC=com
are correct.
......................... BACKUPDC passed test VerifyReferences
Test omitted by user request: VerifyEnterpriseReferences
Test omitted by user request: CheckSecurityError
Running partition tests on : ForestDnsZones
Starting test: CrossRefValidation
......................... ForestDnsZones passed test CrossRefValidation
Starting test: CheckSDRefDom
......................... ForestDnsZones passed test CheckSDRefDom
Running partition tests on : DomainDnsZones
Starting test: CrossRefValidation
......................... DomainDnsZones passed test CrossRefValidation
Starting test: CheckSDRefDom
......................... DomainDnsZones passed test CheckSDRefDom
Running partition tests on : Schema
Starting test: CrossRefValidation
......................... Schema passed test CrossRefValidation
Starting test: CheckSDRefDom
......................... Schema passed test CheckSDRefDom
Running partition tests on : Configuration
Starting test: CrossRefValidation
......................... Configuration passed test CrossRefValidation
Starting test: CheckSDRefDom
......................... Configuration passed test CheckSDRefDom
Running partition tests on : bannaridc
Starting test: CrossRefValidation
......................... bannaridc passed test CrossRefValidation
Starting test: CheckSDRefDom
......................... bannaridc passed test CheckSDRefDom
Running enterprise tests on : bannaridc.com
Starting test: Intersite
Skipping site Default-First-Site-Name, this site is outside the scope
provided by the command line arguments provided.
......................... bannaridc.com passed test Intersite
Starting test: FsmoCheck
GC Name: \\DC.bannaridc.com
Locator Flags: 0xe00003fd
PDC Name: \\DC.bannaridc.com
Locator Flags: 0xe00003fd
Time Server Name: \\DC.bannaridc.com
Locator Flags: 0xe00003fd
Preferred Time Server Name: \\DC.bannaridc.com
Locator Flags: 0xe00003fd
KDC Name: \\backupdc.bannaridc.com
Locator Flags: 0xe00001b8
......................... bannaridc.com passed test FsmoCheck
Test omitted by user request: DNS
Test omitted by user request: DNS
Please help me to resolve this issue.
Regards,
surenHi suren,
Error 1256 is logged as the replication status per partition as a result of the destination DC cancelling the sync request from the source DC due to a connectivity failure previously encountered.
Please refer to the articles below to troubleshoot the issue:
Troubleshooting AD Replication error 1256: The remote system is not available.
http://support.microsoft.com/kb/2200187
Troubleshooting AD Replication error 5: Access is denied
http://support.microsoft.com/kb/2002013
Regards,
Mandy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
Replication Error in Quotation from CRM to ECC
Hi All,
This is regarding the Replication error which we are getting in the Quotation/Orders in the CRM server, when the Quotation/Orders is getting replicated to ECC server.
Let me explain the process,
We have the Internet Sales Application (ISA Version 5.0) implemented with B2B Scenario.
Dealers create Quotes from ISA for Configurable materials. The Configurable material has a "knowledge base" version already created in ECC in the table "SCEKB". Based on the configuration of the material, the knowledge base version of the material gets updated time to time.
When dealers create Quote for Configurable material from ISA, the latest "knowledge base" version gets determined in the Quotation. As a process, a new knowledge base version for the configurable is created for the material subsequently.
When Dealers are creating Orders for the Quotation from ISA, the order gets created in CRM server but does not get replicated to ECC due to the following error.
Internal error in communication between configuration and sales doc.CONFIGURATION_PROCESSING (Notification A V1 854)
Item 000100 does not exist (Notification E V1 331).
We suspect that the Order when getting replicated to ECC, is trying to determine the latest "knowledge base" version in the system for the material and since there is a mis-match between the Order and the "SCEKB" table, the Order is not getting replicated to ECC.
Can someone tell me how to suppress the above error and get the Order replicated to ECC without any issues.
Thanks,
RaviHi Ravi,
Did you managed to get a solution for this?
We have a similiar situation, can you please provide an input if you have any?
Thanks,
Sindhur. -
Hello experts,
when running a process chain I get an replication error.
it says
"..the DataSource 8Z_ODS_1 (its an ODS-Object) has a different timestamp in sourcesystem than in Business Information Warehouse ..."
I have no clue what this is supposed to mean!
any suggestions?
thanx
AxelHi Linda,
1. You can use the below program to activate.
RS_TRANSTRU_ACTIVATE_ALL porgram (se38) -> give the infosource name and activate.
2. Or search the Infosource in RSA1 and go into the Tranfer rules and click on activate button.
If you do not have authorisation in your Quality or Production server for the above two steps, do the step 2 in Development. You will be prompted for a transport request creation. Create the TR and release it to the target server.
regards,
Archana -
ACS SE Database replication fails
Hello, I recently upgraded our ACS SEs from 4.0 to 4.1. All appeared to go OK but I checked the logs recently and saw the the database replication is failing with the message:
ACS '[hostname]'is running a different version of ACS - aborting.
All ACS SE were upgraded at the same time and display the same versions when examining the Appliance Upgrade page. Does anyone have any ideas what the problem is?
Thanks in advance.Hi, I am having a related problem but in my case I am using ACS for Windows ver.4.0. I am replicating from one primary ACS to three other ACS using scheduled nightly replication.
The problem is that the data is being updated on all three ACS servers, but in the database replication logs on the primary I get messages stating that "ACS-server-name replication failed possibly due to short time-out or dead". Moreover, not all three servers timeout. Sometimes one server timeout, and other times two servers timeout, etc.
On the replicated servers logs, the only log, in case server times out, shows that "replication cycle starting....". while when replication is successfull, it also shows Replication cycle completed successfully.
I have played around with the timeouts but the result is random. I have also checked if there are any bandwidth issues, but replication is scheduled at night with minimal network traffic and the servers are also not being used for authentications.
Don't understand why I don't see successful messages all the time, specially when the data does get updated on the replica ACS.
Thanks.
MAG -
ACS internal database replication
I have setup ACS internal database replication and it works once then the secondary config is overwritten and doesn't contain the AAA server of the primary.
primary - 10.100.253.25
ACS 1113 running 4.2
secondary - 10.100.253.26
ACS 1113 running 4.2
Example of before and after
Before replication
The primary has these AAA servers listed under network components.
self - 127.0.0.1
acs2 - 10.100.253.26
The secondary has these AAA servers listed under network components.
self - 127.0.0.1
acs1 - 10.100.253.25
After replication
The primary has these AAA servers listed under network components.
self - 127.0.0.1
acs2 - 10.100.253.26
The secondary has these AAA servers listed under network components.
self - 127.0.0.1
acs2 - 10.100.253.26
therefore after the first replication subsequent attempts will fail because the secondary won't accept attempts from unknown AAA servers. Is this to be expected or can I mitigate it in someway?Please try setting the original ip address by using "Set ip" Command from the console connection of the ACS Solution engine. Once you successfully changed the ip address, you can apply the patch 11 or above (latest is patch 16) on the ACS SE (This will fix the problem).
In majority of cases set ip command fails but sometime works too.
In case it doesn't help then we have 2 options:
1.] Open a TAC case, send the database file to delete the entry.
2.] If you are not intrested sending your database then try the below listed steps:
In order to remove the loopback entry from the Database, we need to follow following steps,
Please download ACS 4.2 trial from following link, if you do not have ACS Full version for Windows purchased.
http://www.cisco.com/cgi-bin/tablebuild.pl/acs-win-eval- eval-ACS-4.2.0.124-SW.zip
[1] Install eval version on Windows 2000/2003 server. Please also ensure that JAVA is installed on that server.
[2] Take a backup from ACS SE from, System Configuration > ACS Backup >Backup Now.
[3] Restore the database backup on ACS eval.
[4] On eval ACS , go to Network Configuration > find the AAA Server entry with 127.0.0.1 entry. Edit it and give it some other IP for
example, 1.1.1.1. Submit + Apply.
[5] On eval, Restart CSAdmin service.
[6] On eval, go back to Network Configuration and search for the changed IP address and delete that entry, Delete + Apply.
[7] Take a backup from eval ACS, System Configuration > ACS Backup > Backup Now.
[8] Restore the database backup from eval ACS into ACS SE from option, System Configuration > ACS Restore, choose the database backup. Check Check option "User and Group Database" and "CiscoSecure ACS System Configuration", then press Restore Now.
[9] On ACS SE, go to Network Configuration, make sure that 127.0.0.1 entry is not there and for ACS SE's hostname we have the correct IP address. Go to Proxy Distribution Table > (Default). Move the server’s hostname entry that has correct IP for this ACS SE into "Forward To" column, if not already. Then press "Submit + Restart".
Reference defect, CSCso36620 - Toggle nic command changes AAA server ip address to "127.0.0.1" in GUI.
Regards,
Jatin
Do rate helpful posts- -
I have a primary ACS with IP address 10.250.97.29/24. it is working fine.
Now I would like to add a secondary
ACS with IP 10.250.97.50/24. Both
ACS 4.1 are identical with version 23
patch 5. both are running on Win2k3
with Service Pack 2. Both Win2k3 are
domain controllers in the same forest.
I followed the guide in Cisco CCO for
replication but when I tried to
replicate from the primary I get this:
Outbound replication cycle starting..
ACS 'lab-test' has denied replication request
Outbound replication cycle completed
lab-lcs the primary ACS and lab-test
is the secondary ACS.
on the lab-test, I see this:
Inbound database replication from ACS 'lab-lcs' denied
on the lab-lcs, I configured it to
accept replication from the Primary
ACS.
Anyone know why it is not working?
Thanks.ensure that you do not have Primary ACS server entry under "Replication Partner" column on Secondary ACS configuration for Internal Database Replication section. It should be under "AAA Server" under Replication section.
Regards,
Prem -
Hi Guys,
Is anyone having a problem with DB replication on 4.2?
I have both my ACS servers added in the network devices with correct keys set.
i have set one to send and the other to recieve in the db replication settings, I have also set the partner on the sending device and set the accept from on the receiving end correctly.
I can ping between the two boxes, however I get a no response error on the sending ACS.
I get nothing in the logs of the receiver?
Any Ideas??
Cheers
ScottScott,
Please make sure that replication is setup correctly.
1) Make sure that you are not replicating over NAT. Replication over NAT does not work because the IP is used as part of the server authentication
2) Next, check to make sure that you are not sending or receiving the distribution table. On the primary server, the distribution table should not be checked in the send list, and on the secondary, the distribution table should not be checked for receive.
3) Then I would like you to check in the secondary server's partner list, to make sure that the primary is not listed. You should not enter the primary server into the partner list on the secondary server. However, the primary server should have all secondary servers listed in its partner list.
4) Ensure that the secondary server has it's replication scheduling set to "manual".
5) Please verify that your servers are all running exactly the same ACS version and build.
6) Also let me know if we have any firewall in between two acs servers.
Regards,
~JG -
ACS Engine Hanging / Replication Problems
I have two ACS 1112 Appliances running the latest software (Release 4.0(1) Build 42). Each appliance seems to run fine on its own. However, after setting up and successfully performing replication, the second ACS will not fully reboot. It says CSAuth did not start. 'show' usually shows the cpu at 100% with the services in various states of stopped, stopping, or starting. The web interface is unavailable. Another thing I have noticed that I think may have something to do with it is the status of the remote agents in the network device table. After replication, (and before rebooting) I can click on one successfully on the original machine, but when I attempt to click on one on the second appliance, I get a 404 browser error, and my ACS session is closed. I have to log back in to do anything else. Right now, I am rebuilding the second appliance from the cd (for the 15th time) to attempt replication with no remote agents defined to make narrow down the problem. Also note that if I manually add a remote agent on the second appliance, I am able to get to its properties with not problems. I am only not able to get to replicated entries' properties. Thanks in advance for any help.
Well, forget about the remote agents. The primary appliance has a very basic config. The only things in the network device table are itself and the other ACS. They each have the correct settings and the same key. The backup ACS has no configuration settings, except the ACS settings in the network device table and the appropriate replication settings. After a successful replication from primary to backup, and a reboot of the backup--it will not start back up. The CPU is at 100% and the services look like this:
CSAdmin stopped
CSAuth starting
CSDbSync starting
CSLog stopping
CSMon starting
CSRadius starting
CSTacacs starting
CSAgent running
thanks. -
Merge Replication Error When Initialising subscription
I have a SQL server 2005 server with a merge publication of 6 articles all of which are tables which is also the distributor. I have two existing subscriptions one from a SQL 2005
Server and one from a SQL Server 2008 R2 Server both of which are working fine on this publication. I am trying to setup a third subscription to another SQL Server 2008 R2 server, the only difference with this server is that it is a named instance. I have
forced the port to 1433, and created an alias on the publisher connectivity is not an issue or at least i don't think so.
when I try to initialise the subscription from a new snapshot I get the below error;
Error: 14151, Severity: 18, State: 1.
Replication-Replication Merge Subsystem: agent failed. No subscription is on this publication or article.
I've changed the agent profile and turned on verbose logging and output the results to a file the snapshot delivery is failing on the below for the first table;
call sys.sp_MSsetup_identity_range (?,?,?,?,?,?,?,?)
I've checked the subscriber and the table does indeed get dropped and created, permissions / routes don't seem to be an issue. I've included some of the verbose logging output below.
2012-01-11 12:05:40.684 Microsoft SQL Server Merge Agent 9.00.3042.00
2012-01-11 12:05:40.700 Copyright (c) 2005 Microsoft Corporation
2012-01-11 12:05:40.716 Microsoft SQL Server Replication Agent: replmerg
2012-01-11 12:05:40.716
2012-01-11 12:05:40.731 The timestamps prepended to the output lines are expressed in terms of UTC time.
2012-01-11 12:05:40.747 User-specified agent parameter values:
-Publisher PubServerName
-PublisherDB UserDBName
-Publication MtoC_M
-Subscriber SubServerName
-SubscriberDB UserDBName
-Distributor PubServerName
-DistributorSecurityMode 1
-Continuous
-OutputVerboseLevel 4
-Output G:\CMcReplicationLogging\OUTPUT.TXT
-XJOBID 0x5FFBC73C3A4A494A9E10C369696B1C72
-XJOBNAME PubServerName-UserDBName-MtoC_M-SubServerName-29
-XSTEPID 2
-XSUBSYSTEM Merge
-XSERVER PubServerName
-XCMDLINE 0
-XCancelEventHandle 000008EC
-XParentProcessHandle 00000E9C
2012-01-11 12:05:40.841 Percent Complete: 0
2012-01-11 12:05:40.841 Connecting to Distributor 'PubServerName'
2012-01-11 12:05:40.856 Repl Agent Status: 3
2012-01-11 12:05:40.856 Connecting to OLE DB Distributor at datasource: 'PubServerName', location: '', catalog: '', providerstring: '' using provider 'SQLNCLI'
2012-01-11 12:05:42.137 OLE DB Distributor: PubServerName
DBMS: Microsoft SQL Server
Version: 09.00.3042
catalog name:
user name: dbo
API conformance: 0
SQL conformance: 0
transaction capable: 1
read only: F
identifier quote char: "
non_nullable_columns: 0
owner usage: 15
max table name len: 128
max column name len: 128
need long data len:
max columns in table: 1000
max columns in index: 16
max char literal len: 131072
max statement len: 131072
max row size: 131072
2012-01-11 12:05:42.137 OLE DB Distributor 'PubServerName': {call sp_MSgetversion }
2012-01-11 12:05:42.153 OLE DB Distributor 'PubServerName': {call sp_helpdistpublisher (N'PubServerName') }
2012-01-11 12:05:42.169 OLE DB Distributor 'PubServerName': {call sp_MShelp_repl_agent (N'PubServerName', N'UserDBName', N'MtoC_M', N'SubServerName', N'UserDBName', 1)}
2012-01-11 12:05:42.169 OLE DB Distributor 'PubServerName': select datasource, srvid from master..sysservers where upper(srvname) = upper(N'PubServerName')
2012-01-11 12:05:42.184 OLE DB Distributor 'PubServerName': {call sp_MShelp_merge_agentid (0,N'UserDBName',N'MtoC_M',null,N'UserDBName',90,N'SubServerName')}
2012-01-11 12:05:42.184 OLE DB Distributor 'PubServerName': {call sp_MShelp_profile (29, 4, N'')}
2012-01-11 12:05:42.184 Percent Complete: 0
2012-01-11 12:05:42.184 Connecting to OLE DB Publisher at datasource: 'PubServerName', location: '', catalog: 'UserDBName', providerstring: '' using provider 'SQLNCLI'
2012-01-11 12:05:42.200 Initializing
2012-01-11 12:05:42.200 Repl Agent Status: 1
2012-01-11 12:05:42.216 OLE DB Distributor 'PubServerName': {call sys.sp_MSadd_merge_history90 (?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?)}
2012-01-11 12:05:42.216 Percent Complete: 0
2012-01-11 12:05:42.231 Connecting to Publisher 'PubServerName'
2012-01-11 12:05:42.231 Repl Agent Status: 3
2012-01-11 12:05:42.231 OLE DB Distributor 'PubServerName': {call sys.sp_MSadd_merge_history90 (?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?)}
2012-01-11 12:05:43.153 OLE DB Publisher: PubServerName
DBMS: Microsoft SQL Server
Version: 09.00.3042
catalog name: UserDBName
user name: dbo
API conformance: 0
SQL conformance: 0
transaction capable: 1
read only: F
identifier quote char: "
non_nullable_columns: 0
owner usage: 15
max table name len: 128
max column name len: 128
need long data len:
max columns in table: 1000
max columns in index: 16
max char literal len: 131072
max statement len: 131072
max row size: 131072
2012-01-11 12:05:43.169 OLE DB Publisher 'PubServerName': set nocount on declare @dbname sysname select @dbname = db_name() declare @collation nvarchar(255) select @collation = convert(nvarchar(255), databasepropertyex(@dbname, N'COLLATION')) select collationproperty(@collation,
N'CODEPAGE') as 'CodePage', collationproperty(@collation, N'LCID') as 'LCID', collationproperty(@collation, N'COMPARISONSTYLE') as 'ComparisonStyle',cast(case when convert (int,databasepropertyex (@dbname,'comparisonstyle')) & 0x1 = 0x1 then 0 else 1 end
as bit) as DB_CaseSensitive,cast(case when convert (int,serverproperty ('comparisonstyle')) & 0x1 = 0x1 then 0 else 1 end as bit) as Server_CaseSensitive set nocount off
2012-01-11 12:05:43.169 OLE DB Publisher 'PubServerName': {call sp_MSgetversion }
2012-01-11 12:05:43.200 Connecting to OLE DB Publisher at datasource: 'PubServerName', location: '', catalog: 'UserDBName', providerstring: '' using provider 'SQLNCLI'
2012-01-11 12:05:44.137 OLE DB Publisher: PubServerName
DBMS: Microsoft SQL Server
Version: 09.00.3042
catalog name: UserDBName
user name: dbo
API conformance: 0
SQL conformance: 0
transaction capable: 1
read only: F
identifier quote char: "
non_nullable_columns: 0
owner usage: 15
max table name len: 128
max column name len: 128
need long data len:
max columns in table: 1000
max columns in index: 16
max char literal len: 131072
max statement len: 131072
max row size: 131072
2012-01-11 12:05:44.137 OLE DB Publisher 'PubServerName': {call sp_MSchecksnapshotstatus (N'MtoC_M')}
2012-01-11 12:05:44.153 OLE DB Publisher 'PubServerName': {call sp_helpmergepublication (N'MtoC_M')}
2012-01-11 12:05:44.153 OLE DB Publisher 'PubServerName': {call sys.sp_MSgetreplicainfo(?,?,?,?,?,?,?,90)}
2012-01-11 12:05:44.169 OLE DB Distributor 'PubServerName': {call sp_MShelp_repl_agent (N'PubServerName', N'UserDBName', N'MtoC_M', N'SubServerName', N'UserDBName', 1)}
2012-01-11 12:05:44.169 Connecting to OLE DB Subscriber at datasource: 'SubServerName', location: '', catalog: 'UserDBName', providerstring: '' using provider 'SQLNCLI'
2012-01-11 12:05:44.747 OLE DB Subscriber: SubServerName
DBMS: Microsoft SQL Server
Version: 10.50.1600
catalog name: UserDBName
user name: distributor_MtoC
API conformance: 0
SQL conformance: 0
transaction capable: 1
read only: F
identifier quote char: "
non_nullable_columns: 0
owner usage: 15
max table name len: 128
max column name len: 128
need long data len:
max columns in table: 1000
max columns in index: 16
max char literal len: 131072
max statement len: 131072
max row size: 131072
2012-01-11 12:05:45.122 OLE DB Subscriber 'SubServerName': {call sp_MSgetversion }
2012-01-11 12:05:45.216 OLE DB Subscriber 'SubServerName': {call sp_MSreplcheck_subscribe}
2012-01-11 12:05:45.309 OLE DB Subscriber 'SubServerName': set nocount on declare @dbname sysname select @dbname = db_name() declare @collation nvarchar(255) select @collation = convert(nvarchar(255), databasepropertyex(@dbname, N'COLLATION')) select collationproperty(@collation,
N'CODEPAGE') as 'CodePage', collationproperty(@collation, N'LCID') as 'LCID', collationproperty(@collation, N'COMPARISONSTYLE') as 'ComparisonStyle',cast(case when convert (int,databasepropertyex (@dbname,'comparisonstyle')) & 0x1 = 0x1 then 0 else 1 end
as bit) as DB_CaseSensitive,cast(case when convert (int,serverproperty ('comparisonstyle')) & 0x1 = 0x1 then 0 else 1 end as bit) as Server_CaseSensitive set nocount off
2012-01-11 12:05:45.419 Percent Complete: 0
2012-01-11 12:05:45.419 OLE DB Subscriber 'SubServerName': {call sys.sp_MSadd_merge_history90 (?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?)}
2012-01-11 12:05:45.419 Connecting to Subscriber 'SubServerName'
2012-01-11 12:05:45.434 Repl Agent Status: 3
2012-01-11 12:05:45.434 OLE DB Distributor 'PubServerName': {call sys.sp_MSadd_merge_history90 (?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?)}
2012-01-11 12:05:45.559 Percent Complete: 0
2012-01-11 12:05:45.559 OLE DB Subscriber 'SubServerName': {call sys.sp_MSadd_merge_history90 (?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?)}
2012-01-11 12:05:45.559 Retrieving publication information
2012-01-11 12:05:45.575 Repl Agent Status: 3
2012-01-11 12:05:45.575 OLE DB Distributor 'PubServerName': {call sys.sp_MSadd_merge_history90 (?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?)}
2012-01-11 12:05:45.653 OLE DB Subscriber 'SubServerName': {call sys.sp_MSmerge_upgrade_subscriber(1,?)}
2012-01-11 12:05:45.653 Percent Complete: 0
2012-01-11 12:05:45.669 Retrieving subscription information.
2012-01-11 12:05:45.669 Repl Agent Status: 3
2012-01-11 12:05:45.684 OLE DB Distributor 'PubServerName': {call sys.sp_MSadd_merge_history90 (?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?)}
2012-01-11 12:05:45.763 OLE DB Publisher 'PubServerName': {call sys.sp_MSgetreplicainfo(?,?,?,?,?,?,?,90)}
2012-01-11 12:05:45.763 OLE DB Publisher 'PubServerName': {call sys.sp_MShelpmergearticles (?,9000000,?) }
2012-01-11 12:05:45.778 OLE DB Publisher 'PubServerName': {call sp_MSenumschemachange (?,?,9000000,?,0,1) }
2012-01-11 12:05:45.794 OLE DB Subscriber 'SubServerName': {call sys.sp_MSadd_merge_history90 (?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?)}
2012-01-11 12:05:45.888 OLE DB Publisher 'PubServerName': {call sys.sp_MSallocate_new_identity_range (?,?,?,?,?,?,?,?,?,?,?)}
2012-01-11 12:05:45.888 Percent Complete: 0
2012-01-11 12:05:45.903 Applying the snapshot to the Subscriber
2012-01-11 12:05:45.903 OLE DB Publisher 'PubServerName': {call sys.sp_MSallocate_new_identity_range (?,?,?,?,?,?,?,?,?,?,?)}
2012-01-11 12:05:45.903 Repl Agent Status: 3
2012-01-11 12:05:45.919 OLE DB Publisher 'PubServerName': {call sys.sp_MSallocate_new_identity_range (?,?,?,?,?,?,?,?,?,?,?)}
2012-01-11 12:05:45.919 OLE DB Distributor 'PubServerName': {call sys.sp_MSadd_merge_history90 (?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?)}
2012-01-11 12:05:45.919 OLE DB Publisher 'PubServerName': {call sys.sp_MSallocate_new_identity_range (?,?,?,?,?,?,?,?,?,?,?)}
2012-01-11 12:05:45.934 OLE DB Publisher 'PubServerName': {call sys.sp_MSallocate_new_identity_range (?,?,?,?,?,?,?,?,?,?,?)}
2012-01-11 12:05:45.950 OLE DB Publisher 'PubServerName': {call sys.sp_MSallocate_new_identity_range (?,?,?,?,?,?,?,?,?,?,?)}
2012-01-11 12:05:45.950 OLE DB Publisher 'PubServerName': {call sys.sp_MSallocate_new_identity_range (?,?,?,?,?,?,?,?,?,?,?)}
2012-01-11 12:05:45.966 OLE DB Publisher 'PubServerName': {call sys.sp_MSallocate_new_identity_range (?,?,?,?,?,?,?,?,?,?,?)}
2012-01-11 12:05:45.981 OLE DB Publisher 'PubServerName': {call sys.sp_MSallocate_new_identity_range (?,?,?,?,?,?,?,?,?,?,?)}
2012-01-11 12:05:45.997 OLE DB Publisher 'PubServerName': {call sys.sp_MSallocate_new_identity_range (?,?,?,?,?,?,?,?,?,?,?)}
2012-01-11 12:05:45.997 OLE DB Subscriber 'SubServerName': {call master..sp_helpreplicationoption ('merge')}
2012-01-11 12:05:46.091 OLE DB Subscriber 'SubServerName': {call sys.sp_MSmergesubscribedb ('true', 0) }
2012-01-11 12:05:47.263 OLE DB Subscriber 'SubServerName': {call sp_MSpublicationcleanup (?,?,?)}
2012-01-11 12:05:47.372 OLE DB Subscriber 'SubServerName': {call sp_MSCleanupForPullReinit (?,?,?)}
2012-01-11 12:05:47.481 OLE DB Subscriber 'SubServerName': {call sp_MSdropconstraints (N'tblEmailMessages',N'dbo')}
2012-01-11 12:05:47.606 OLE DB Subscriber 'SubServerName': {call sp_MSdropconstraints (N'tblUser',N'dbo')}
2012-01-11 12:05:47.716 OLE DB Subscriber 'SubServerName': {call sp_MSdropconstraints (N'tblDPVLocked',N'dbo')}
2012-01-11 12:05:47.809 OLE DB Subscriber 'SubServerName': {call sp_MSdropconstraints (N'tblCaptureAppToken',N'dbo')}
2012-01-11 12:05:47.903 OLE DB Subscriber 'SubServerName': {call sp_MSdropconstraints (N'tblCreditThresholdNotification',N'dbo')}
2012-01-11 12:05:48.013 OLE DB Subscriber 'SubServerName': {call sp_MSdropconstraints (N'tblCreditPot',N'dbo')}
2012-01-11 12:05:48.106 OLE DB Subscriber 'SubServerName': {call sys.sp_MSaddinitialpublication (?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?)}
2012-01-11 12:05:48.247 OLE DB Subscriber 'SubServerName': {call sp_MSunmarkifneeded (N'tblEmailMessages',?, 1, ?, ?)}
2012-01-11 12:05:48.403 OLE DB Subscriber 'SubServerName': {call sp_MSunmarkifneeded (N'tblUser',?, 1, ?, ?)}
2012-01-11 12:05:48.513 OLE DB Subscriber 'SubServerName': {call sp_MSunmarkifneeded (N'tblDPVLocked',?, 1, ?, ?)}
2012-01-11 12:05:48.606 OLE DB Subscriber 'SubServerName': {call sp_MSunmarkifneeded (N'tblCaptureAppToken',?, 1, ?, ?)}
2012-01-11 12:05:48.700 OLE DB Subscriber 'SubServerName': {call sp_MSunmarkifneeded (N'tblCreditThresholdNotification',?, 1, ?, ?)}
2012-01-11 12:05:48.809 OLE DB Subscriber 'SubServerName': {call sp_MSunmarkifneeded (N'tblCreditPot',?, 1, ?, ?)}
2012-01-11 12:05:48.903 OLE DB Publisher 'PubServerName': {call sp_MShelpmergeschemaarticles(?)}
2012-01-11 12:05:48.919 OLE DB Subscriber 'SubServerName': {call sp_MSaddinitialsubscription (?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?)}
2012-01-11 12:05:49.059 OLE DB Distributor 'PubServerName': select datasource, srvid from master..sysservers where upper(srvname) = upper(N'PubServerName')
2012-01-11 12:05:49.059 OLE DB Distributor 'PubServerName': {call sys.sp_MSadd_mergesubentry_indistdb (0,N'PubServerName',N'UserDBName',N'MtoC_M',N'SubServerName',N'UserDBName',0,1,0,N'',?,90)}
2012-01-11 12:05:49.075 OLE DB Subscriber 'SubServerName': {call sp_MScreateglobalreplica (?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,90)}
2012-01-11 12:05:49.341 Connecting to OLE DB Subscriber at datasource: 'SubServerName', location: '', catalog: 'UserDBName', providerstring: '' using provider 'SQLNCLI'
2012-01-11 12:05:49.825 OLE DB Subscriber: SubServerName
DBMS: Microsoft SQL Server
Version: 10.50.1600
catalog name: UserDBName
user name: distributor_MtoC
API conformance: 0
SQL conformance: 0
transaction capable: 1
read only: F
identifier quote char: "
non_nullable_columns: 0
owner usage: 15
max table name len: 128
max column name len: 128
need long data len:
max columns in table: 1000
max columns in index: 16
max char literal len: 131072
max statement len: 131072
max row size: 131072
2012-01-11 12:05:50.185 OLE DB Subscriber: SubServerName
DBMS: Microsoft SQL Server
Version: 10.50.1600
catalog name: UserDBName
user name: distributor_MtoC
API conformance: 0
SQL conformance: 0
transaction capable: 1
read only: F
identifier quote char: "
non_nullable_columns: 0
owner usage: 15
max table name len: 128
max column name len: 128
need long data len:
max columns in table: 1000
max columns in index: 16
max char literal len: 131072
max statement len: 131072
max row size: 131072
2012-01-11 12:05:50.325 OLE DB Subscriber 'SubServerName': {call sys.sp_MSregistermergesnappubid(?, ?)}
2012-01-11 12:05:50.450 OLE DB Subscriber 'SubServerName': sp_MSacquiresnapshotdeliverysessionlock
2012-01-11 12:05:50.544 OLE DB Subscriber 'SubServerName': sp_MStrypurgingoldsnapshotdeliveryprogress
2012-01-11 12:05:50.810 OLE DB Subscriber 'SubServerName': {call sys.sp_MSadd_merge_history90 (?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?)}
2012-01-11 12:05:50.966 [2%] OLE DB Subscriber 'SubServerName': {call sys.sp_MSadd_merge_history90 (?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?)}
ꜻä㹒 ꜐äB 11 12:05ä谼砗꜐ä镴ĀPercent Complete: 4
2012-01-11 12:05:50.997 Propagated 1 schema changes: 1 total
2012-01-11 12:05:51.013 Repl Agent Status: 3
2012-01-11 12:05:51.013 OLE DB Distributor 'PubServerName': {call sys.sp_MSadd_merge_history90 (?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?)}
2012-01-11 12:05:51.091 [6%] OLE DB Subscriber 'SubServerName': {call sys.sp_MSadd_merge_history90 (?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?)}
ꜻä㹒 ꜐äB 11 12:05ä谼砗꜐ä镴ĀPercent Complete: 6
2012-01-11 12:05:51.122 Propagated 1 schema changes: 2 total
2012-01-11 12:05:51.153 Repl Agent Status: 3
2012-01-11 12:05:51.153 OLE DB Distributor 'PubServerName': {call sys.sp_MSadd_merge_history90 (?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?)}
2012-01-11 12:05:51.200 OLE DB Subscriber 'SubServerName': {call sp_MSunmarkreplinfo (N'tblEmailMessages')}
2012-01-11 12:05:51.200 [6%] Percent Complete: 6
2012-01-11 12:05:51.231 Propagated 1 schema changes: 3 total
2012-01-11 12:05:51.247 Repl Agent Status: 3
2012-01-11 12:05:51.263 OLE DB Distributor 'PubServerName': {call sys.sp_MSadd_merge_history90 (?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?)}
2012-01-11 12:05:51.325 OLE DB Subscriber 'SubServerName': sp_MSissnapshotitemapplied @snapshot_session_token = N'E:\Microsoft SQL Server\MSSQL.1\MSSQL\repldata\unc\PubServerName_UserDBName_MTOC_M\20120111115787\', @snapshot_progress_token = N'E:\Microsoft
SQL Server\MSSQL.1\MSSQL\repldata\unc\PubServerName_UserDBName_MTOC_M\20120111115787\tblEmailMessages_2.sch'
2012-01-11 12:05:51.435 drop Table [dbo].[tblEmailMessages]
go
SET ANSI_PADDING ON
go
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
CREATE TABLE [dbo].[tblEmailMessages](
[EmailMessageId] [bigint] IDENTITY(1,1) NOT FOR REPLICATION NOT NULL,
[Guid] [nvarchar](32) NOT NULL,
[Recipients] [varchar](8000) NOT NULL,
[CcRecipients] [varchar](8000) NULL,
[BccRecipients] [varchar](8000) NULL,
[Sender] [varchar](8000) NOT NULL,
[Subject] [nvarchar](4000) NOT NULL,
[BodyText] [nvarchar](max) NULL,
[BodyHTML] [nvarchar](max) NULL,
[IsBodyEncrypted] [bit] NOT NULL CONSTRAINT [DF_tblEmailMessages_IsBodyEncrypted] DEFAULT ((0)),
[Status] [tinyint] NOT NULL CONSTRAINT [DF_tblEmailMessages_Status] DEFAULT ((1)),
[DateAdded] [datetime] NOT NULL CONSTRAINT [DR_tblEmailMessages_DateAdded] DEFAULT (getdate()),
[rowguid] [uniqueidentifier] ROWGUIDCOL NOT NULL CONSTRAINT [MSmerge_df_rowguid_207F75F229994684BC3FAAE5BE4CD6EB] DEFAULT (newsequentialid())
GO
GRANT DELETE ON [dbo].[tblEmailMessages] TO [odintermediary]
GO
GRANT INSERT ON [dbo].[tblEmailMessages] TO [odintermediary]
GO
GRANT SELECT ON [dbo].[tblEmailMessages] TO [odintermediary]
GO
GRANT UPDATE ON [dbo].[tblEmailMessages] TO [odintermediary]
GO
SET ANSI_NULLS ON
go
SET QUOTED_IDENTIFIER ON
go
ALTER TABLE [dbo].[tblEmailMessages] ADD CONSTRAINT [PK_tblEmailMessage] PRIMARY KEY CLUSTERED
[EmailMessageId] ASC
)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, SORT_IN_TEMPDB = OFF, IGNORE_DUP_KEY = OFF, ONLINE = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON)
GO
2012-01-11 12:05:51.450 OLE DB Subscriber 'SubServerName': drop Table [dbo].[tblEmailMessages]
2012-01-11 12:05:51.560 OLE DB Subscriber 'SubServerName': SET ANSI_PADDING ON
2012-01-11 12:05:51.669 OLE DB Subscriber 'SubServerName': SET ANSI_NULLS ON
2012-01-11 12:05:51.778 OLE DB Subscriber 'SubServerName': SET QUOTED_IDENTIFIER ON
2012-01-11 12:05:51.872 OLE DB Subscriber 'SubServerName': CREATE TABLE [dbo].[tblEmailMessages](
[EmailMessageId] [bigint] IDENTITY(1,1) NOT FOR REPLICATION NOT NULL,
[Guid] [nvarchar](32) NOT NULL,
[Recipients] [varchar](8000) NOT NULL,
[CcRecipients] [varchar](8000) NULL,
[BccRecipients] [varchar](8000) NULL,
[Sender] [varchar](8000) NOT NULL,
[Subject] [nvarchar](4000) NOT NULL,
[BodyText] [nvarchar](max) NULL,
[BodyHTML] [nvarchar](max) NULL,
[IsBodyEncrypted] [bit] NOT NULL CONSTRAINT [DF_tblEmailMessages_IsBodyEncrypted] DEFAULT ((0)),
[Status] [tinyint] NOT NULL CONSTRAINT [DF_tblEmailMessages_Status] DEFAULT ((1)),
[DateAdded] [datetime] NOT NULL CONSTRAINT [DR_tblEmailMessages_DateAdded] DEFAULT (getdate()),
[rowguid] [uniqueidentifier] ROWGUIDCOL NOT NULL CONSTRAINT [MSmerge_df_rowguid_207F75F229994684BC3FAAE5BE4CD6EB] DEFAULT (newsequentialid())
2012-01-11 12:05:51.981 OLE DB Subscriber 'SubServerName': GRANT DELETE ON [dbo].[tblEmailMessages] TO [odintermediary]
2012-01-11 12:05:52.091 OLE DB Subscriber 'SubServerName': GRANT INSERT ON [dbo].[tblEmailMessages] TO [odintermediary]
2012-01-11 12:05:52.200 OLE DB Subscriber 'SubServerName': GRANT SELECT ON [dbo].[tblEmailMessages] TO [odintermediary]
2012-01-11 12:05:52.294 OLE DB Subscriber 'SubServerName': GRANT UPDATE ON [dbo].[tblEmailMessages] TO [odintermediary]
2012-01-11 12:05:52.403 OLE DB Subscriber 'SubServerName': SET ANSI_NULLS ON
2012-01-11 12:05:52.497 OLE DB Subscriber 'SubServerName': SET QUOTED_IDENTIFIER ON
2012-01-11 12:05:52.606 OLE DB Subscriber 'SubServerName': ALTER TABLE [dbo].[tblEmailMessages] ADD CONSTRAINT [PK_tblEmailMessage] PRIMARY KEY CLUSTERED
[EmailMessageId] ASC
)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, SORT_IN_TEMPDB = OFF, IGNORE_DUP_KEY = OFF, ONLINE = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON)
2012-01-11 12:05:52.716 OLE DB Subscriber 'SubServerName': sp_MSrecordsnapshotdeliveryprogress @snapshot_session_token = N'E:\Microsoft SQL Server\MSSQL.1\MSSQL\repldata\unc\PubServerName_UserDBName_MTOC_M\20120111115787\', @snapshot_progress_token = N'E:\Microsoft
SQL Server\MSSQL.1\MSSQL\repldata\unc\PubServerName_UserDBName_MTOC_M\20120111115787\tblEmailMessages_2.sch'
2012-01-11 12:05:52.841 OLE DB Subscriber 'SubServerName': {call sys.sp_MSadd_merge_history90 (?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?)}
2012-01-11 12:05:52.966 [6%] Percent Complete: 6
2012-01-11 12:05:52.981 Applied script 'tblEmailMessages_2.sch'
2012-01-11 12:05:52.981 Repl Agent Status: 3
2012-01-11 12:05:52.981 OLE DB Distributor 'PubServerName': {call sys.sp_MSadd_merge_history90 (?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?)}
2012-01-11 12:05:53.153 OLE DB Subscriber 'SubServerName': {call sys.sp_MSadd_merge_history90 (?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?)}
2012-01-11 12:05:53.263 [6%] OLE DB Subscriber 'SubServerName': {call sys.sp_MSaddinitialarticle (?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?)}
ꜻä㹒 ꜐äB 11 12:05ä谼砗꜐ä镴ĀPercent Complete: 6
2012-01-11 12:05:53.294 Preparing table 'tblEmailMessages' for merge replication
2012-01-11 12:05:53.294 Repl Agent Status: 3
2012-01-11 12:05:53.310 OLE DB Distributor 'PubServerName': {call sys.sp_MSadd_merge_history90 (?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?)}
2012-01-11 12:05:53.450 OLE DB Subscriber 'SubServerName': {call sp_MSupdatesysmergearticles (?,?,?,?,0)}
2012-01-11 12:05:53.575 OLE DB Subscriber 'SubServerName': {call sys.sp_MSsetup_identity_range (?,?,?,?,?,?,?,?)}
2012-01-11 12:05:53.794 The merge process was unable to deliver the snapshot to the Subscriber. If using Web synchronization, the merge process may have been unable to create or write to the message file. When troubleshooting, restart the synchronization with
verbose history logging and specify an output file to which to write.
2012-01-11 12:05:53.825 OLE DB Subscriber 'SubServerName': {call sys.sp_MSadd_merge_history90 (?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?)}
2012-01-11 12:05:53.966 Percent Complete: 6
2012-01-11 12:05:53.966 No subscription is on this publication or article.
2012-01-11 12:05:53.997 Repl Agent Status: 6
2012-01-11 12:05:54.013 OLE DB Distributor 'PubServerName': {call sys.sp_MSadd_merge_history90 (?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?)}
2012-01-11 12:05:54.216 Percent Complete: 0
2012-01-11 12:05:54.231 Category:SQLSERVER
Source: SubServerName
Number: 14050
Message: No subscription is on this publication or article.
2012-01-11 12:05:54.247 Repl Agent Status: 3
2012-01-11 12:05:54.372 Percent Complete: 0
2012-01-11 12:05:54.372 Category:NULL
Source: Merge Replication Provider
Number: -2147201001
Message: The merge process was unable to deliver the snapshot to the Subscriber. If using Web synchronization, the merge process may have been unable to create or write to the message file. When troubleshooting, restart the synchronization with verbose history
logging and specify an output file to which to write.
2012-01-11 12:05:54.388 Repl Agent Status: 3
2012-01-11 12:05:54.388 Disconnecting from OLE DB Subscriber 'SubServerName'
2012-01-11 12:05:54.388 Disconnecting from OLE DB Subscriber 'SubServerName'
2012-01-11 12:05:54.403 Disconnecting from OLE DB Subscriber 'SubServerName'
2012-01-11 12:05:54.403 Disconnecting from OLE DB Subscriber 'SubServerName'
2012-01-11 12:05:54.403 Disconnecting from OLE DB Publisher 'PubServerName'
2012-01-11 12:05:54.419 Disconnecting from OLE DB Publisher 'PubServerName'
2012-01-11 12:05:54.419 Disconnecting from OLE DB Publisher 'PubServerName'
2012-01-11 12:05:54.419 Disconnecting from OLE DB Publisher 'PubServerName'
2012-01-11 12:05:54.435 Disconnecting from OLE DB Distributor 'PubServerName'
2012-01-11 12:05:54.435 Disconnecting from OLE DB Distributor 'PubServerName'
2012-01-11 12:05:54.450 The merge process will restart after waiting 30 second(s)...
Percent Complete: 0
Any help would be much appreciated.
Thanks
ChrisThe error happens on this table every time.
The schema of the table is below;
CREATE TABLE [dbo].[tblEmailMessages](
[EmailMessageId] [bigint] IDENTITY(1,1) NOT FOR REPLICATION NOT NULL,
[Guid] [nvarchar](32) NOT NULL,
[Recipients] [varchar](8000) NOT NULL,
[CcRecipients] [varchar](8000) NULL,
[BccRecipients] [varchar](8000) NULL,
[Sender] [varchar](8000) NOT NULL,
[Subject] [nvarchar](4000) NOT NULL,
[BodyText] [nvarchar](max) NULL,
[BodyHTML] [nvarchar](max) NULL,
[IsBodyEncrypted] [bit] NOT NULL CONSTRAINT [DF_tblEmailMessages_IsBodyEncrypted] DEFAULT ((0)),
[Status] [tinyint] NOT NULL CONSTRAINT [DF_tblEmailMessages_Status] DEFAULT ((1)),
[DateAdded] [datetime] NOT NULL CONSTRAINT [DR_tblEmailMessages_DateAdded] DEFAULT (getdate()),
[rowguid] [uniqueidentifier] ROWGUIDCOL NOT NULL CONSTRAINT [MSmerge_df_rowguid_207F75F229994684BC3FAAE5BE4CD6EB] DEFAULT
(newsequentialid())
The table gets dropped and recreated each time i try to reinitialise the subscription. I can't remove the article at the moment as two other servers subscribe to the publication.
Thanks for your help
Chris
I am the master of my fate: I am the captain of my soul.
Maybe you are looking for
-
Error 504 when trying to access craigslist. Happens 50% of the time.
when I am on Craigslist, about half the time when I click on a link or request a search, the following message appears; burlington.craigslist.org 504 Error It appears the website you are trying to visit is having technical difficulties or is no longe
-
How can we change the Reports scheduled Time in OBIEE 11.1.1.5
Hello Friends, I have scheduled BI Publisher reports for FTP, but now I want to change the scheduling time or cancel the scheduled reports. But I didn't get any option for that. If any body know, please let me know. Thanks & regards, Pradip
-
I would like to transfer Video ( Quick time ) to a memory stick . What would be a good format to use ( file size ).
-
Hi, In the below example I have tried to insert the functionalities of zoom and rotate on an image, unfortunately from time to time the centre of the image gets lost. How to resolve this Problem? <?xml version="1.0"?> <mx:Application xmlns:mx=" http:
-
Lightroom 4.3 installation issue
On my 64-bit Windows machine, the install removed my desktop shortcut, but did not put a new one in its place. When I went to look for it under the Lanch menu, it could not be found. I had to go into the Programs folder and send a shortcut to the des