ACS 4.2.1.15 patch 4 installation

Hi everybody,
I'm having a problem when I try to install the patch 4 in a Windows ACS 4.2.1. When I began the installation process, after I confirm that version 4.2.1 is installed, the installation window disapear and never receive a message from the OS.
If I check the installed version in the ACS web page, the upgrade doesn't appear. After reload the server I can see an error message for the previous installation process and I can't see information in the installation log.
Some one can help me?
Regards,
Guzmán

Hi Anisha,
There is no error message, the DOS window dissapear and the patch installation never ends.
The only error that can see is when I restart the server and Windows show an error window.
I have read the patch installation Readme and the following point indicates the logs location:
11. The command window will show minimal information on what’s happening. For detailed logs please locate AcsPatchInstall.log in the root folder of . On applying the next patch this log gets overwritten.

Similar Messages

ACS 4.2.1.15 Patch Version 11

Dear All,
We are facing weird issue with ACS. The shared secret key is automatically changing to some random value and stops working for that particular group. It happens very frequently and working after manually changing the shared key. Patch also not available after 11. Plz help

Hi Anisha,
There is no error message, the DOS window dissapear and the patch installation never ends.
The only error that can see is when I restart the server and Windows show an error window.
I have read the patch installation Readme and the following point indicates the logs location:
11. The command window will show minimal information on what’s happening. For detailed logs please locate AcsPatchInstall.log in the root folder of . On applying the next patch this log gets overwritten.

Acs 4.2 Se 1113 patch 124.15 ??

anyone can help me?
I have two ACS SE 2.4 1113; same hardware, same software and same configuration.
Why if I install the patch on both one working properly while the other gives me access to the console and doing database replication returns me the error
“Shared secret passwords do not match.”
the AAA server are configured correctly with the correct passwords and the correct users.
There is a known bug?
I'm going crazy

Hi Anisha,
There is no error message, the DOS window dissapear and the patch installation never ends.
The only error that can see is when I restart the server and Windows show an error window.
I have read the patch installation Readme and the following point indicates the logs location:
11. The command window will show minimal information on what’s happening. For detailed logs please locate AcsPatchInstall.log in the root folder of . On applying the next patch this log gets overwritten.

Every PATCH installation fails after installing Windows Updates

Hello,
I want to report an issue which I think is a Windows bug introduced by one of the Windows updates (unfortunately I wasn't able to find out which one of them).
Here is the test case:
1. install a fresh copy of Windows on a test machine
2. install all available Windows Updates (so the system is up to date)
3. create a sample MSI installer which only installs some dummy files (let's say Product Version 1.0.0) and host it on a web server
4. install the MSI from the online location using a command line like this:
msiexec /i http://server/share/package.msi
5. create a .MSP patch (e.g. v1.0.1) which only adds a new file to v1.0.0
6. install the v1.0.1 patch
RESULT: the patch installation fails with the following error message: "The filename , directory name , or volume label syntax is incorrect"
NOTES:
1. the issue was replicated on Windows 7 and 8 machines UP TO DATE
2. the issue is not replicated on a fresh installation of Windows without Updates applied
Is there anyone aware of what could cause this error? Once again the patch installation fails only on Windows machines with the latest Updates installed.
Thx,
Daniel

Hello,
I want to report an issue which I think is a Windows bug introduced by one of the Windows updates (unfortunately I wasn't able to find out which one of them).
Here is the test case:
1. install a fresh copy of Windows on a test machine
2. install all available Windows Updates (so the system is up to date)
3. create a sample MSI installer which only installs some dummy files (let's say Product Version 1.0.0) and host it on a web server
4. install the MSI from the online location using a command line like this:
msiexec /i http://server/share/package.msi
5. create a .MSP patch (e.g. v1.0.1) which only adds a new file to v1.0.0
6. install the v1.0.1 patch
RESULT: the patch installation fails with the following error message: "The filename , directory name , or volume label syntax is incorrect"
NOTES:
1. the issue was replicated on Windows 7 and 8 machines UP TO DATE
2. the issue is not replicated on a fresh installation of Windows without Updates applied
Is there anyone aware of what could cause this error? Once again the patch installation fails only on Windows machines with the latest Updates installed.
Thx,
Daniel

Patch installation failing

I tried installing 4329444 patch .but it failed giving the following errors
bash-3.00$ opatch apply
Invoking OPatch 10.2.0.1.0
Oracle interim Patch Installer version 10.2.0.1.0
Copyright (c) 2005, Oracle Corporation. All rights reserved..
Oracle Home : /oracle/app/oracle/OracleHomes/oms10g
Central Inventory : /oracle/app/oracle/oraInventory
from : /oracle/app/oracle/OracleHomes/oms10g/oraInst.loc
OPatch version : 10.2.0.1.0
OUI version : 10.2.0.1.0
OUI location : /oracle/app/oracle/OracleHomes/oms10g//oui
Log file location : /oracle/app/oracle/OracleHomes/oms10g/cfgtoollogs/opatch/opatch-2008_May_20_17-49-49-IST_Tue.log
ApplySession applying interim patch '4329444' to OH '/oracle/app/oracle/OracleHomes/oms10g'
Interim Patch '4329444' is not applicable to OH '/oracle/app/oracle/OracleHomes/oms10g'... Platforms not compatible
Apply Session failed: ApplySession failed to prepare the system. OUI-67020:Interim Patch '4329444' is not applicable to OH '/oracle/app/oracle/OracleHomes/oms10g'... Platforms not compatible
OPatch detects Platform ID 453 while this patch supports the following platforms: [ 23: Sun SPARC Solaris (64-BIT), ]
System intact, OPatch will not attempt to restore the system
OPatch failed with error code 73
but I checked up this with the follwing commands
bash-3.00$ isainfo -vk
64-bit sparcv9 kernel modules
bash-3.00$ isainfo -vb
64-bit sparcv9 applications
asi_blk_init
bash-3.00$ uname -a
SunOS ardeedb 5.10 Generic_127111-02 sun4v sparc SUNW,Sun-Fire-T200
Sreejesh

Sorry, but which bit of the error message did you not read:
"Platforms not compatible
Apply Session failed: ApplySession failed to prepare the system. OUI-67020:Interim Patch '4329444' is not applicable to OH '/oracle/app/oracle/OracleHomes/oms10g'... Platforms not compatible"

Patch installer not overwriting the existing one

Patch installer not overwriting the existing one
Hi, for one my LabVIEW application, I have created two installers
Including all the required additional installers (Installer)
With no additional installer (patch installer)
So that, for further versions they can use only patch installer.
When I try to installer both the installer of same version which created two icons in “Control Panel\Programs\Programs and Features” as shown below.
When I am installing the second installer (patch), I expected that it will either overwrite the existing or it will not allow me to install. But both didn’t happen.
Please share your thoughts on the above.
Thanks in advance
Phani
Solved!
Go to Solution.

Thank you..
I got another doubt on the same.
"Upgrade Code" should be same
1.)For both installers (normal and patch)?
2.)For all the versions?
which one is correct in the above two?

Ciscowork 3.2.1 daemon manager is not working after patch installation

Hi Team
Ciscowork 3.2.1 daemon manager is not working after patch installation.
C:\Documents and Settings\Administrator>net start crmdmgtd
The CiscoWorks Daemon Manager service is starting.
The CiscoWorks Daemon Manager service could not be started.
The service did not report an error.
More help is available by typing NET HELPMSG 3534.
Also I checked syslog.log and it is showing below error
an 17 14:39:34 127.0.0.1 100: <28> dmgt[1316]: 2507(W):Daemon manager anonymous user has not been set up: 00000569
Please suggest.
With Regards,
neena

During installation, an user casuser is created with certian security settings and if those are modified\removed, DM will not start.
Following message will be seen in /log/syslog.log
Daemon manager anonymous user has not been set up: 00000775
To solve the issue, run resetcasuser.exe located under /setup.support to recreate the settings.
Make sure casuser account is not locked out. Make sure casuser is a member of casusers group and is set to "password never expires".
Additionally you can try to make casuser a member of adiministrators group.
-Thanks

Ciscowork3.2.1 daemon manager is not working after patch installation

Ciscowork 3.2.1 daemon manager is not working after patch installation
Hi Team
Ciscowork 3.2.1 daemon manager is not working after patch installation.
C:\Documents and Settings\Administrator>net start crmdmgtd
The CiscoWorks Daemon Manager service is starting.
The CiscoWorks Daemon Manager service could not be started.
The service did not report an error.
More help is available by typing NET HELPMSG 3534.
Also I checked syslog.log and it is showing below error
an 17 14:39:34 127.0.0.1 100: <28> dmgt[1316]: 2507(W):Daemon manager anonymous user has not been set up: 00000569
I reset the casuser password and restarted the service but still no luck....
Please suggest.
With Regards,
neena

Neena,
Check the properties of casuser under Start > Settings > Control Panel > Administrative Tools > Computer Management > Local Users and Groups > Users and make sure it is not disabled or locked out. The only thing checked should be "Password never expires". Change anything required and reset casuser.

10.1.3.5.0 patch installation

Hi All,
I have installed SOA Suite 10.1.3.10 as stand alone installation using oracle lite database. Now I want to install 10.1.3.5.0 pacth set to the existing soa suite.
Could any one please share me the documentation steps for this. Its bit urgent.
Any help would be appreciated !
Regards,
JK

Hi JK,
Could any one please share me the documentation steps for this. Its bit urgent.There would be a ReadMe file with patch installer. It has all the patch installtion steps mentioned in it. You should also refer release notes of 10.1.3.5 -
http://download.oracle.com/docs/cd/E14101_01/doc.1013/e15342/toc.htm
Regards,
Anuj

Windows 7 X86 Update patch installation failed ("Updateshandler.log - Update execution failed")

Hi,
I am using SCCM 2007 R3 at client site, Since from Jan 2015 and for Feb 2015 also i am facing a problem in Windows 7 32bit OS Patch installation failure on Client PC. I am creating a bundle for Windows 7 OS Patch's and targeting these monthly patches to
windows 7 Collection having X86 and X64 bit OS.
From All the Deployed Patches only X64 bit Win 7 PC's are getting successfully Update.
BUT on all X86(32Bit) win 7 OS there was Installation Failed Error. The UPDATES are getting successfully downloaded in CACHE folder on client PC's but while installation they are getting failed. I have tried reinstalling SCCM Client on PC but problem persists.
Checked number of forum's and done WUA re-installtion as well, Tried downloading new patches for win7 32 bit and deployed again, but no +ve result. WSUS reconfigured and reinstalled and approved all patches again, again no solution.
Updates for all other OS's Like Win 8, 8.1 Server 2003,2008 and 2012 for X86 and C64 all working fine.
Updateshandler.log Giving :---- Update execution failed.
MP DP and all other roles are working fine with SUP role reinsalled.
Tried:-
https://technet.microsoft.com/en-in/library/bb932189.aspx
http://blogs.technet.com/b/sudheesn/archive/2010/11/10/troubleshooting-sccm-part-iii-software-updates.aspx
https://social.technet.microsoft.com/Forums/systemcenter/en-US/c8c8715e-a1f7-4de1-b17f-d3a72c24db6c/updates-not-show-up?forum=configmgrsum
Please anyone help..
Regards
Rajiv.

1. We have tried downloading patch again & again . Try to push them trough SCCM targeting win7 collection having x-86 & x-64 bit OS.
2. Tried manual installation of . Cab files also on 10 win 7 x-86 PC's but all failing with error code.0x800706f7. This code shows The stub received bad data. In both cases (manual & SCCM )
3. Even tried downloading .MSU files for same KB article that also not getting installed
4. Monitored Windowsupdate.log & DISM.log & CBS.log
Handler Fatal: CBS called error with 0x800706f7
warning exit code=0x00000000; call error code=0x80240022
5. Tried renaming windir/Softwaredeployment folder to windir/Softwaredeployment.log & run SFC /Scannow
0x800706F7 -2147023113 RPC_X_Bad_Stub_Data This can occur after a control selfupdate that has not fully completed and requires a reboot. The controls may need to be reregistered.
This seems related to a problem within Windows, and ConfigMgr is not at fault - Windows has a severe issue which is affecting the servicing stack.
Try CheckSUR.
http://blogs.technet.com/b/roplatforms/archive/2011/04/28/installation-failures-cbs-store-corruptions-uncommon-issues-and-troubleshooting.aspx
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

Patch installation EP 6.0 SP9 issues

Hi ,
During the installation of EP which has been installed as follows
-Oracle 9.2.0.6
-SAP Web AS 6.4 SR1 . (Only central instance and the database instance
with no seperate dialog instances)
-EP 6.0 SP9 SR1
-KMC
The SAP note 766765 mentioned in the guide "EP60SP9Install_SR1_v5.pdf"
asks me to install the patch for KMC which later on directs me to
"NW_SP_STACK09_109.pdf" the support package guide for SP09 .
In the section "2 Support Package Stack 09" under the heading "2.1 List
of Required Support Packages" of this guide it gives me a list of support
packages . I have downloaded the required packages for the technical
scenario "SAP enterprise portal" . They are for Web AS , Portal
paltformand KMC and I assume that I have to install all of them . Now I
go to the
section "4.4 SAP Web AS Java" which is on page 62 of the guide .Here
under the section "4.4.2 Preparation" it says the following
" If Portal Platform and Knowledge Management and Collaboration (KMC) are
running on your Web AS Java, apply KMC Patch 2 for SAP NetWeaver '04
Support Package Stack 05 before patching this Web AS Java. For more
information, see SAP Note 772515.
While typically patches are included in the next support package, in this
case you must install Patch 2 for KMC prior to applying the Support
Package Stack to Web AS Java. "
ISSUE 1 : When I check for the SAP note 772515, the service marketplace
says "Note 772515 is not released." Now I am stuck with the
installationas I don't know where to find the KMC Patch 2 and secondly
what relevantinformation I will be missing about this patch( let's say Ifind the
patch myself ) , if I intend to ignore the inexistance of SAP note 772515 .
In the section "4.4.2 Preparation" of the support package stack guide
SP09 under the heading "Windows only" it says in the "Action"
"Make sure that SAP MMC and the Microsoft Service Management Console
are not running."
ISSUE 2 : If this is what I do then I cannot install the patch because
during the intial information capture with SAPINST it validates the
userpwd for the user DDIC . For this it needs to establish the RFC
conectionwhich it cannot , as the MMC is down . Similarily it does for
the J2EE
engine parameters and this will not happen again as the MMC is down .
Now I am not sure if I keep the MMC running and start with the patch
installation , what damage will I cause to the already installed system
I need your help in the above mentioned issues asap as the delay in the
installation will effect the delivery schedule of the project .

Hi Deepak,
> I need your help in the above mentioned issues
> asap as the delay in the installation will effect
> the delivery schedule of the project .
If that is so, please open an OSS message to SAP. There is no guaranteed answering time in SDN.
Regards,
Karsten

Toshiba Video Player v5.3.49.124_A-patch installation

Hi
I'm trying to install an update to Toshiba Video Player released on February 15th 2015 - version 5.3.49.124_A patch. The problem is, as soon as I try to install it its says that its extracting the file and then an error message appears, "Unable to create file, error 120." Please help in trying to resolve the above error.
Thank You,
Inayat

Hmmmm.... as I can see you don't have original factory settings anymore. In the past I have always installed updates on original OS version and cannot say if Win update is the reason for described issue.
But original player version is still installed on your machine and works properly, right?
I mean if everything is OK I think patch installation is not so necessary.

SWSE patch installation from 8.1.1 to 8.1.1.3

Hi All,
As part of patch installation I tried to install SWSE. After restarting webserver, siebel application is still showing 8.1.1 current version.
when I check in SWEapp\public\enu folder I didn't find 21219 folder.
Actually our environment setup is enterprise server and one server(we have two servers) in one machine and SWSE and another server is in another machine.
I have followed all combinations, stoping webservers, siebel server and enterprise server and tried to install SWSE patch to show our application to 8.1.1.3. but never 21219 folder is been created?
Please share your solution.
Thanks
Sean

Hi Sean,
What are the contents of files below?
SWEapp\upgrade.txt
SWEapp\upgrade_enu.txt
SWEapp\base.txt
SWEapp\enu.txt
SIEBEL_ROOT\upgrade.txt
SIEBEL_ROOT\upgrade_enu.txt
siebsrvr\enu.txt
siebsrvr\base.txt
Also provide the OS platform and version you are using for Siebel Server and SWEapp.
Thanks,
Wilson

Oracle 10g patche installation

Dear Friends,
Very very happy new year.
We have oracle 10g release 10.2.0.2.0
DB client lib.     OCI_102 (10.2.0.1.
DB releases        ORACLE 9.2.0..,
DBSL version       700.08
DBSL Patch Level   201
OS is as below
Operating system     HP-UX
Machine type         ia64
Platform ID          274
Now we have to apply oracle patches.
IF any one has done this or having any document , please provide me and any idea is most welcome

Hi Dear,
Thanks fro your reply.
We are applying the patches but getting the errors as below.
Please help me.
MOPatch - Install Multiple Oracle Patches in One Run - 2.1.6.
Copyright (c) Oracle Corporation 2007-2010. All Rights Reserved.
Version:       2.1.6
Revision:      5.1.2.10
Command-line: /oracle/DVR/102_64/MOPatch/mopatch.sh
Oracle Home:   /oracle/DVR/102_64RDBMS version: 10.2.0.2.0
OPatch version:10.2.0.2.5
Clean-up:      supportedPSUs:          not supportedLog file:      $ORACLE_HOME/cfgtoollogs/mopatch/mopatch-2011_01_17-17-33-13.logPatch base:    .Patch source: .Link script:   ./link.shReadmes:       <none>
Strpd. Readmes:<none>make utility: /usr/ccs/bin/makeunzip utility: /oracle/DVR/102_64/bin/unzip
Getting pre-run patch inventory...executing: "/oracle/DVR/102_64/OPatch/opatch" lsinventory -retry 0 -invPtrLoc /oracle/DVR/102_64/oraInst.loc -xml "./mopatch-22436-8022-tmpdir/preinv.xml"
Invoking OPatch 10.2.0.2.5Oracle Interim Patch Installer version 10.2.0.2.5Copyright (c) 2007, Oracle Corporation. All rights reserved.Oracle Home       : /oracle/DVR/102_64Central Inventory : /oracle/oraInventory   from           : /oracle/DVR/102_64/oraInst.locOPatch version    : 10.2.0.2.5OUI version       : 10.2.0.2.0OUI location      : /oracle/DVR/102_64/ouiLog file location : /oracle/DVR/102_64/cfgtoollogs/opatch/opatch2011-01-17_17-33-14PM.logLsinventory Output file location : /oracle/DVR/102_64/cfgtoollogs/opatch/lsinv/lsinventory2011-01-17_17-33-14PM.txt
Installed Top-level Products (2): Oracle Database 10g            racle Database 10g Release 2 Patch Set 1                            10.2.0.2.0There are 2 products installed in this Oracle Home.Interim patches (45) :
OPatch failed with error code 74Processing patch "SAP_102051_201012_HPUXIA64.zip!9980062"...failed.
Reason: Cannot apply patch.Processing patch "SAP_102051_201012_HPUXIA64.zip!9952230"...(2 of 44)
executing: "/oracle/DVR/102_64/bin/unzip" -qq -d "./mopatch-22436-8022-tmpdir" "./SAP_102051_201012_HPUXIA64.zip" "SAP_102051_201012/9952230/*"
executing: ( cd "./mopatch-22436-8022-tmpdir/stage/SAP_102051_201012/9952230" && "/oracle/DVR/102_64/OPatch/opatch" apply -silent -no_relink -local -invPtrLoc /oracle/DVR/102_64/oraInst.loc )Invoking OPatch 10.2.0.2.5
Oracle Interim Patch Installer version 10.2.0.2.5Copyright (c) 2007, Oracle Corporation. All rights reserved.
Oracle Home       : /oracle/DVR/102_64Central Inventory : /oracle/oraInventory   from           : /oracle/DVR/102_64/oraInst.loc
OPatch version    : 10.2.0.2.5OUI version       : 10.2.0.2.0OUI location      : /oracle/DVR/102_64/oui
Log file location : /oracle/DVR/102_64/cfgtoollogs/opatch/opatch2011-01-17_17-33-30PM.log
ApplySession applying interim patch '9952230' to OH '/oracle/DVR/102_64'
Interim Patch 9952230 has Conflict with patch(es) [ 7237154 6455161 5618049 5531355 ] in OH /oracle/DVR/102_64
Conflict patches:   7237154 6455161 5618049 5531355
Patch(es) 7237154 6455161 5618049 5531355 conflict with the patch currently being installed (9952230).
If you continue, patch(es) 7237154 6455161 5618049 5531355 will be rolled back and the new patch (9952230) will be installed.If a merge of the new patch (9952230) and the conflicting patch(es) ( 7237154 6455161 5618049 5531355) is required, contact Oracle Support Services and request a Merged patch.Do you want to proceed? [y|n]
N (auto-answered by -silent)User Responded with: NApplySession failed during prerequisite checks: ApplySession exits on requestSystem intact, OPatch will not attempt to restore the systemThe following warnings have occurred during OPatch execution:1) OUI-67012:Interim Patch 9952230 has Conflict with patch(es) [ 7237154 6455161 5618049 5531355 ] in OH /oracle/DVR/102_64OPatch failed with error code 74executing: ( cd "./mopatch-22436-8022-_102051_201012/9952230" && "/oracle/DVR/102_64/OPatch/opatch" apply -force -silent -no_relink -local -invPtrLoc /oracle/DVR/102_64/oraInst.loc )
Invoking OPatch 10.2.0.2.5Oracle Interim Patch Installer version 10.2.0.2.5Copyright (c) 2007, Oracle Corporation. All rights reserved.Oracle Home       : /oracle/DVR/102_64Central entory : /oracle/oraInventoryfrom           : /oracle/DVR/102_64/oraInst.loc
OPatch version    : 10.2.0.2.5OUI version       : 10.2.0.2.0OUI location      : /oracle/DVR/102_64/ouiLog file location : /oracle/DVR/102_64/cfgtoollogs/opatch/opatch2011-01-17_17-33-40PM.log
ApplySession applying interim patch '9952230' to OH '/oracle/DVR/102_64'
Interim Patch 9952230 has Conflict with patch(es) [ 7237154 6455161 5618049 5531355 ] in OH /oracle/DVR/102_64
Conflict patches:   7237154 6455161 5618049 5531355
Patch(es) 7237154 6455161 5618049 5531355 conflict with the patch currently being installed (9952230).
If you continue, patch(es) 7237154 6455161 5618049 5531355 will be rolled back and the new patch (9952230) will be installed.If a merge of the new patch (9952230) and the conflicting patch(es) ( 7237154 6455161 5618049 5531355) is required, contact Oracle Support Services and request a Merged patch.
Do you want to proceed? [y|n]Y (auto-answered by -silent)User Responded with: YRunning prerequisite checks...
Patch 9952230: Optional component(s) missing : [ oracle.rdbms, 10.2.0.5.0 ] , [ oracle.rdbms.rsf, 10.2.0.5.0 ] , [ oracle.rdbms.dbscripts, 10.2.0.5.0 ] Prerequisite check "CheckApplicable" failed.
The details are:Patch is no-op patch.ApplySession failed during prerequisite checks: Prerequisite check "CheckApplicable" failed.System intact, OPatch will not attempt to restore the system
The following warnings have occurred during OPatch execution:
1) OUI-67012:Interim Patch 9952230 has Conflict with patch(es) [ 7237154 6455161 5618049 5531355 ] in OH /oracle/DVR/102_64Patch failed with error code 74Processing patch "SAP_102051_201012_HPUXIA64.zip!9952230"...skipped.Reason: Patch conflicts.Processing patch "SAP_102051_201012_HPUXIA64.zip!9770451"...(3 of 44)
executing: "/oracle/DVR/102_64/bin/unzip" -qq -d "./mopatch-22436-8022-tmpdir" "./SAP_102051_201012_HPUXIA64.zip" "SAP_102051_201012/9770451/*"
executing: ( cd "./mopatch-22436-8022-tmpdir/stage/SAP_102051_201012/9770451" && "/oracle/DVR/102_64/OPatch/opatch" apply -silent -no_relink -local -invPtrLoc /oracle/DVR/102_64/oraInst.loc )
Invoking OPatch 10.2.0.2.5Oracle Interim Patch Installer version 10.2.0.2.5
Copyright (c) 2007, Oracle Corporation. All rights reserved.
Oracle Home       : /oracle/DVR/102_64Central Inventory : /oracle/oraInventory
   from           : /oracle/DVR/102_64/oraInst.loc
OPatch version    : 10.2.0.2.5
OUI version       : 10.2.0.2.0
OUI location      : /oracle/DVR/102_64/oui
Log file location : /oracle/DVR/102_64/cfgtoollogs/opatch/opatch2011-01-17_17-33-51PM.log
ApplySession applying interim patch '9770451' to OH '/oracle/DVR/102_64'
Running prerequisite checks...
Patch 9770451: Optional component(s) missing : [ oracle.rdbms, 10.2.0.5.0 ]
Prerequisite check "CheckApplicable" failed.
The details are:
Patch is no-op patch.
ApplySession failed during prerequisite checks: Prerequisite check "CheckApplicable" failed.
System intact, OPatch will not attempt to restore the system
OPatch failed with error code 74
Processing patch "SAP_102051_201012_HPUXIA64.zip!9770451"...failed.
Reason: Cannot apply patch.
Processing patch "SAP_102051_201012_HPUXIA64.zip!9584028"...(4 of 44)
executing: "/oracle/DVR/102_64/bin/unzip" -qq -d "./mopatch-22436-8022-tmpdir" "./SAP_102051_201012_HPUXIA64.zip" "SAP_102051_201012/9584028/*"
executing: ( cd "./mopatch-22436-8022-tmpdir/stage/SAP_102051_201012/9584028" && "/oracle/DVR/102_64/OPatch/opatch" apply -silent -no_relink -local -invPtrLoc /oracle/DVR/102_64/oraInst.loc )
Invoking OPatch 10.2.0.2.5
Oracle Interim Patch Installer version 10.2.0.2.5
Copyright (c) 2007, Oracle Corporation. All rights reserved.
Oracle Home       : /oracle/DVR/102_64
Central Inventory : /oracle/oraInventory
   from           : /oracle/DVR/102_64/oraInst.loc
OPatch version    : 10.2.0.2.5
OUI version       : 10.2.0.2.0
OUI location      : /oracle/DVR/102_64/oui
Log file location : /oracle/DVR/102_64/cfgtoollogs/opatch/opatch2011-01-17_17-33-58PM.log
ApplySession applying interim patch '9584028' to OH '/oracle/DVR/102_64'
Running prerequisite checks...
Prerequisite check "CheckApplicable" failed.
The details are:
Patch 9584028: Required component(s) missing : [ oracle.rdbms, 10.2.0.5.0 ]
ApplySession failed during prerequisite checks: Prerequisite check "CheckApplicable" failed.
System intact, OPatch will not attempt to restore the system
OPatch failed with error code 74
Processing patch "SAP_102051_201012_HPUXIA64.zip!9584028"...failed.
Reason: Cannot apply patch.
Processing patch "SAP_102051_201012_HPUXIA64.zip!9548269"...(5 of 44)
executing: "/oracle/DVR/102_64/bin/unzip" -qq -d "./mopatch-22436-8022-tmpdir" "./SAP_102051_201012_HPUXIA64.zip" "SAP_102051_201012/9548269/*"
executing: ( cd "./mopatch-22436-8022-tmpdir/stage/SAP_102051_201012/9548269" && "/oracle/DVR/102_64/OPatch/opatch" apply -silent -no_relink -local -invPtrLoc /oracle/DVR/102_64/oraInst.loc )
Invoking OPatch 10.2.0.2.5
Regards
Ganesh Datt Tiwari

ACS 5.2 Solution Engine Patches and Installs

Hi
Im trying to upload the 5.2 patches to the ACS Solution Engine so i can install the updates.
Does anyone know how to do this or know the links that show how to do this??
The User Guide documentation isnt very helpful.
Thanks
Marco

Hi Marco,
Here is the link for downloading ACS5.2 patches :
http://www.cisco.com/cisco/software/release.html?mdfid=283107438&flowid=18604&softwareid=282766937&release=5.2.0.26&relind=AVAILABLE&rellifecycle=&reltype=latest
Downlaod any patch and place in the FTP/SFTP server in your enviroment
Login to the ACS CLI :
Create a repository:
acs/admin(config)# repository myrepository
acs/admin(config-Repository)# url sftp://starwars.test.com/repository/system1
acs/admin(config-Repository)# user luke password skywalker
acs/admin(config-Repository)# exit
after that run this command :
acs patch install patch-name.tar.gpg repository repository-nameInstalling an ACS patch requires a restart of ACS services.Would you like to continue? yes/no
once done you can do a sh version and see the acs5.2 with the new patch.
Also when you download the patch there is also read me with similar instructions.
Herre is the link for acs5.2 patch 5 read me link :
http://www.cisco.com/web/software/282766937/37718/Acs-5-2-0-26-5-Readme.txt
Thanks
Waris Hussain

ACS 4.2.1.15 patch 4 installation

Similar Messages

Maybe you are looking for