ACS 4.2.1.15 Upgrade: no more web access
Hi,
I upgraded my ACS 4.2 on a Windows 2003 R2 Standard Edition SP2 Server to 4.2.1.15.9. The server seems to be running, I see that it is able to authenticate and authorize my logins and commands on Cisco devices. However when I try to launch the web access from the desktop of the server either with https://<ip adress>:2002 or https://127.0.0.1:2002 I get a message that the website cannot be displayed. When I nmap the server I see that port 2002 is open.
Does anybody have an idea or a special trick how to reenable my web access?
Thanks in advance.
Mat
Try http:// address>:2002 instead of https. ;-)
Regards,
Gurpreet S Puri
Keep Smiling, Peace :)
(Please Rate Helpful Post)
Similar Messages
-
Web Access Not Loading Completely After Upgrade
We recently upgraded from TFS 2012 Update 2 to TFS 2013 Update 4.
After the upgrade, users are having intermittent issues trying to load Web Access - for some users, only the header loads, but none of the information below (like work items, for example) loads - the entire screen basically stays blank.
This is happening on different browsers for different people. Clearing caches has worked for some users and not others, and for some people the problem has come back after being able to load Web Access normally a couple days ago.
I do see this error popping up when debugging:
No define call received from module Presentation/Scripts/TFS/TFS.DataServices. This might be a problem.
What can I do to correct this?Hi Brian,
I'd like to know if you see any error message in the pages of team web access. Also check event logs to see if there any useful information.
For this situation, you can have a check whether your upgrade without issue. Run TFS best practice analyzer to check if there any configuration issues. Make sure you have configured TFS 2013 features after upgrading. Refer to this
page for more information. If the issue still exist after taking the methods, please elaborate more details about your scenario with screenshots.
Best regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
Where can i find more web cam effects like youcam but for mac?
where can i find more web cam effects like youcam but for mac? i want effects to improve my web cam imige
Hi Hans,
I know the above address you offered but those are
not downloadble.So do what I do .... CTRL-S (save page)
As an Oracle trainer, I consider the OBEs to be very important. I doubt that Oracle will get rid of them.
However, it takes time to make them. I suspect that they are created when a new feature needs to be demonstrated and the product management has the resources available.
I just wish they would make the original set from Oracle8i available. They provided some very important basics which have long since hit the archive pile.
I'm sure that some of the ACEs would be happy to upgrade them to Oracle10g/11g level. I know I would be willing to contribute to that effort. -
Problem - acs command authorization and web access control
Hi, I'm trying to add the control of some aironet 1310 bridges with a ACS 3.2 (tacacs+). I wanted to be able to do telnet command authorization restrictions trough shell command authorization sets and be able to give similar restrictive web access at the same time. I have it working if I permit some commands that are sent by the browser as "write memory quiet" and few other ones, but for it to work, I must give them limited users the privilege level 15 and by having the tacacs server authorizing the commands, it work for both, http and telnet. Where my problem begin is when I loose the connection with the ACS server, the user being already authenticated as level 15 user, the device become open to all commands; there is no more restriction applied by the ACS. Do anybody now a workaround.
It is already at local, that is just that the user already have a level 15 access and I used to control the commands through level settings before. So when I try it, my user that is localy level 5 is already recognized as a level 15 user from when it was authenticated through the ACS. If I could find a way to give web access to the 1310 at priv level 5 and still controlling the command set, it would be ok but as soon as I try to access a page that is not permitted other way than by the view level (i think it's level 1... or 0), I get a username password prompt with that line on the top of it:"level_15_or_view_access" and the only way I can access it is by entering a level 15 un/pass. I attached my 1310 aaa config
and here are the command set that work at level 15 to do a "shut" or "no shut" of the radio interface by the web interface:
configure
permit terminal
exit
permit Unmatched Args
interface
permit Dot11Radio0
no
permit shutdown
permit cca
ping
permit Unmatched Args
show
permit Unmatched Args
shutdown
permit Unmatched Args
telnet
permit Unmatched Args
write
permit memory quiet
Thanks for the help ! -
Upgrade from SAP Webas 6.40 to SAP Netweaver 2004s
Do we have to change the virtual host name used for high availability clustering environment to local host name before we conduct the upgrade from SAP WebAS 6.40 to SAP NetWeaver 2004's ?
Do we have to change the virtual host name used for high availability clustering environment to local host name before we conduct the upgrade from SAP WebAS 6.40 to SAP NetWeaver 2004's ?
-
After upgrading to Yosemite web icons in Safari bookmark list have disappeared
After upgrading to Yosemite web icons in Safari bookmarks have disappeared. Anybody know how to reset this?
Hi ..
The webpage icons database may be corrupted as a result of the upgrade.
Open a Finder window. From the Finder menu bar click Go > Go to Folder
Type or copy paste the following:
~/Library/Safari/WebpageIcons.db
Click Go then move the WebpageIcons.db file to the Trash.
Quit and relaunch Safari.
It may take up to a day for your webpage icons to re populate. -
Email body of HTML or RTF messages are rendered in ASCII characters after upgrading to Firefox 5 when viewing email in MS Outlook Web Access (OWA) light from MS Exchange 2007 servers. Issue is repeatable with two entirely different Exchange systems.
Text email renders OK. Work around is to forward email (in use MS-IE).You are welcome. I'm glad you got it back up.
(1) You say you did the symbolic link. I will assume this is set correctly; it's very important that it is.
(2) I don't know what you mean by "Been feeding the [email protected] for several weeks now, 700 emails each day at least." After the initial training period, SpamAssassin doesn't learn from mail it has already processed correctly. At this point, you only need to teach SpamAssassin when it is wrong. [email protected] should only be getting spam that is being passed as clean. Likewise, [email protected] should only be getting legitimate mail that is being flagged as junk. You are redirecting mail to both [email protected] and [email protected] ... right? SpamAssassin needs both.
(3) Next, as I said before, you need to implement those "Frontline spam defense for Mac OS X Server." Once you have that done and issue "postfix reload" you can look at your SMTP log in Server Admin and watch as Postfix blocks one piece of junk mail after another. It's kind of cool.
(4) Add some SARE rules:
Visit http://www.rulesemporium.com/rules.htm and download the following rules:
70sareadult.cf
70saregenlsubj0.cf
70sareheader0.cf
70sarehtml0.cf
70sareobfu0.cf
70sareoem.cf
70sarespoof.cf
70sarestocks.cf
70sareunsub.cf
72sare_redirectpost
Visit http://www.rulesemporium.com/other-rules.htm and download the following rules:
backhair.cf
bogus-virus-warnings.cf
chickenpox.cf
weeds.cf
Copy these rules to /etc/mail/spamassassin/
Then stop and restart mail services.
There are other things you can do, and you'll find differing opinions about such things. In general, I think implementing the "Frontline spam defense for Mac OS X Server" and adding the SARE rules will help a lot. Good luck! -
SSL Certificate to apply on more web application - SharePoint 2013
Hi,
based on your experiences, I'd like to know which SSL certificates are good in order to apply them for more web applications in a SharePoint 2013 farm. Saying a good SSL certificate I intend a SSL certificate not more expensive. The idea is to buy one
certificate with 1 or 2 year licence and use it for two, three, ... web applications.
Fe, I've a look to Thawte certificates but I don't find any info talking about the possibility to apply one certificate for more web applications.
Any suggests to me, please?A single-host certificate applies to one host, or a single Web Application using Path-based Site Collections.
A SAN certificate applies to multiple, limited number of hosts for use with multiple Web Applications using Path-based Site Collections (or in a limited fashion, Host-named Site Collections).
A Wildcard certificate applies to an unlimited number of hosts, or an unlimited number of Web Applications using Path or Host-named Site Collections.
You want a wildcard, unless you have a good reason to not want a wildcard.
Trevor Seward
Follow or contact me at...
  
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs. -
Good day I need the solution to the problem presented my iphone with ios upgrade from 7 to access any app, I get a message that says "log on to itunes to receive notifications"
After the iOS 7.0.2 update words with friends is not working for me either. When I attempt to open the app it just closes itself after a few seconds of being open. This happens every time I attempt to open it.
-
Load balancing two or more Web Provider instaces
Is it possible to balance the load between
two or more Web Provider instaces?
I think that HTTPSession exists between
Parallel Page Engine (PPE) and
the Web Provider instance.
Is it correct?
If so, how can I achive load balancing of
Web Providers?Ok, we tested successfully in our environment and here are the details:
Scenario:
1) One Management Server and two Publishing Servers
2) Publishing Servers are load balanced in F5 (VIP Address)
3) Publishing Servers use Custom App pool identity (Application Pools-->AppVPublishing)
4) App-V 5 Clients use the VIP address in the registry for Publishing Server name and URL
Steps on SQL Side:
1) Obtain the Object SID of the Custom App Pool Identity (ADSI Edit)
2) Login to SQL Server as Admin and launch SQL Mgmt Studio
3) Select App-V 5 DB and expand tables and select 'dbo.PublishingServers'
4) Right click the above table-->edit top 200 Rows'
5) Replace 'Sid' with the one obtained in Step 1
6) File-->Save All
App-V Mgmt Console and Clients
1) Add new packages
2) From any App-V client-->Sync Publishing Server
3) From any browser-->http://<VIP address>:889
4) Make sure all changes on Mgmt Console are reflecting on the Clients
Thanks to Greg who put us in right direction even though scenario is bit different. Also thanks to Chuck Timon from MS App-V team for testing with me.
Now going back to see if we can test this using DSR method on F5 which we tested successfully with App-V 4.6 SP1 earlier. If anyone tested DSR (F5) in App-V 5, please let me know.
Thanks
Raj Yarlagadda
I have - 2 publishing servers listed under this "edit top 200 rows" you want to modify the SID of the publishing
servers computer accounts to the Custom App Pool Identity's SID ? you can't have the same SID
listed for both? -
atleast once in a week the slide to unlock will not work in my iphone 4 and this is happening from the day i have upgraded to ios7. to access my iphone i have to a switch off and then switch on. really frustrating never expected this from Apple.
Hello sivas_live
Try out the troubleshooting steps in the article to resolve issues with your touchscreen intermittent response.
iPhone, iPad, iPod touch: Troubleshooting touchscreen response
http://support.apple.com/kb/ts1827
Regards,
-Norm G -
How to get Upgrade Guide for Web AS 6.40 SP19
Hello,
Is there any one can help me to find the Upgrade Guide for Web AS 6.40 SP19 (Java, Windows)?
Thanks,check
http://service.sap.com/instguides
Thanks
Prince Jose -
Upgrade from Cs4 Web standard to CS5 - only premium available?
I have for the moment CS4 Web Standard software package from Adobe.
But I noticed that there is no upgrade to CS5 Web Standard. It seems there is only a Web Premium.
May we expect that there will be a Standard upgrade also?
Kind regards
MartineJohn,
That is not good news. My CS4 Web Standard is also a Student Version. I'm no longer a student.
So can I still upgrade by purchasing the Premium Upgrade.
Or is there a possibility that I can upgrade the Dreamweaver component?
Or is it also possible to install only Dreamweaver CS5 next to my CS4 package?
Thanks for assisting me
Kind regards
Martine -
Hi there, I couldn't find out on the Adobe site, how much an upgrade to include web commerce through Business catalyst is? (I have a standard design cloud membership. Help pls...:-)
Hi
You can check the BC pricing here
US Yearly Pricing | Adobe Business Catalyst -
I currently have OS X Leopard on a macbook. No where in the entire country that I live stocks Snow Leopard in order to upgrade. So can anyone tell me how I am supposed to upgrade to Lion without access to Snow Leopard first? arrrrgg! Thanks
If by "posted to you" you mean shipped, yes. Usually UPS or FedEx is used by Apple. Note that you may need to access the Online Store that's for your country. If you are not in the US then you cannot purchase it for shipment outside of the US. You can use this link to find the store that serves your country: Change Country. You will find it at the bottom of the Online Store page.
Maybe you are looking for
-
What is wrong with Safari, will not open, get error message?
What is wrong with Safari, will not open, get error message? I download a new copy of Lion today on my Mac After doing that Safari will not open at all. I get message of "safari quite unexpectantly" Then when i open the Details " this is my details "
-
Call a function from matlab labview
hi, I would like to know how can I do to write a string on the front panel of Labview and write simultaneously in the Matlab command window. Thank you
-
Few clarification on SeeBurger adatpers.
Hi All, Presently we have EDI middleware tool which converts the IDOC into EDI and EDI into IDOC. On the outbound scenerio, the converted EDI flat file is sent to VAN and on the inbound scenerio the converted IDOC file is sent to SAP system.
-
I used Foxfire once and went directly to Facebook. It worked. Then I wanted to go to my email which is in cox.net. Foxfire did not take me there and now it won't even open. Just says (not responding).
-
Writing Hyperlinks in JDeveloper Log Window
Hello everyone, I was wondering if anyone can provide me with a simple example on how to write a hyperlink in the Jdeveloper log window. Like the type that is displayed when you are done deploying a web application or generating javadoc documentation