ACS 4.2 trial ver installation problem

Hi,
I have been searching the net for quite some time, for what it could be the reason why the admin page on http://127.0.0.1:2002 do not open, after successfully installed the ACS 4.2 on Win-2003 SP1.
I did installed Java 6.0 and the two JRE patches and I used Firefox as the browser, but all invain.
Any idea what else I need to do more.
Thank you
Sam

Hi Sam,
Do you have another applications install on this server?
I will suggest to install the ACS on a fresh installation of windows 2003.
Thanks,

Similar Messages

ABAP trial veriosion installation problem

what is the Username and password for Database System Administrator Login for MAXDB in ABAP trial version installation, so that i can drop existing database and create new one

what is the Username and password for Database System Administrator Login for MAXDB in ABAP trial version installation, so that i can drop existing database and create new one

SAP Netweaver trial version installation problem

Dear friends
I tried to install SAP netwaever tial version on my labtop. I followed the instruction excatly as shown in the website www.sdn.sap.com. the first confusing thing I faced that during installation of MS loopback adapter I found that the network adapter I cfreated dose not contain (internet protocol TCP/IP instead I had internet protocol version 4 TCP/IPv4. however I used it and do IP address as specified. then I continue installation and when I finished I didnt find the following in my start up menu Programs u2013> SAP NW 7.01 ABAP Trial Version u2013> NSP. only a SAP Management Console was installed. Now I tried to uninstall SAP netweaver from my system in order to reinstall again, but I couldn't uninstall completely and each time I tried to reinstall the system keep give me waring massage that SAP already installed. even I used the registery clean tool but still facing the problem.
Please help me to completely uninstall all the SAP component from my system in order to installed it again.
Thanks in advance
Edited by: rizik_Hilan on Nov 6, 2010 8:24 PM

Dear Faisal
Thanks for your reply I will use the links yo sent to me in yor reply bt first of all I should uninstall all SAP component from my system. each time I run setup from image folder I always get the following massage " the Wizard has detected an already SAP system NSP on this host. Uninstall first." I need a way to remove the remaining SAP . I uninstall every folder I saw in my harddrive related to SAP and also I used registry clean tool bt still I face the problem
For yor help my friends

SAP NetWeaver 2004s Java Trial Version installation problem

I am trying to install SAP NetWeaver 2004s Java Trial Version in my windows xp machine.
I have the following error.
Nothing is written in to my E:\usr\sap folder which I have share as saploc and sapmnt.
I read the forum threads on this.
I still do not know how to do this.
Please help
vijay
INFO 2006-12-17 21:23:58
Execute step getSID of component |NW_Java_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_GetSidNoProfiles|ind|ind|ind|ind|1|0.
ERROR 2006-12-17 21:24:01
FJS-00003 TypeError: dir_profile has no properties (in script NW_Java_OneHost|ind|ind|ind|ind, line 39640: ???)
ERROR 2006-12-17 21:24:01
MUT-03025 Caught ESAPinstException in Modulecall: executing JS script failed.
ERROR 2006-12-17 21:24:01
FCO-00011 The step getSID with step key |NW_Java_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_GetSidNoProfiles|ind|ind|ind|ind|1|0|getSID was executed with status ERROR .

Rajat,
Sorry for the delay. I was on vacation.
Which environment variable are you referring to?
JAVA_HOME is set to C:\j2sdk1.4.2_09.
I am using j2sdk1.4.2_09.
Only port changes I tried was
#sapdp01 3201/tcp.
I tried with and without the # .
Both had the same results.
I have given below the last few statememts from the sapinst log file
Any help to solve my problem will be greatly appreciated.
Thanks.
Vijay
INFO 2007-01-02 16:13:25
Execution of the command "C:\j2sdk1.4.2_09\bin\java.exe -classpath C:/DOCUME1/VIJAYV1/LOCALS1/Temp/sapinst_exe.5432.1167783061/JAR/ins-j2ee.jar com.sap.ins.j2ee.GetSystemProperty" finished with return code 0. Output: ##Tue Jan 02 16:13:25 PST 2007java.runtime.name=Java(TM) 2 Runtime Environment, Standard Editionsun.boot.library.path=C\:
j2sdk1.4.2_09
jre
binjava.vm.version=1.4.2_09-b05java.vm.vendor=Sun Microsystems Inc.java.vendor.url=http\://java.sun.com/path.separator=;java.vm.name=Java HotSpot(TM) Client VMfile.encoding.pkg=sun.iouser.country=USsun.os.patch.level=Service Pack 2java.vm.specification.name=Java Virtual Machine Specificationuser.dir=C\:
Program Files
sapinst_instdir
NW04S
SNEAK_PREVIEW
FULL
INSTALLjava.runtime.version=1.4.2_09-b05java.awt.graphicsenv=sun.awt.Win32GraphicsEnvironmentjava.endorsed.dirs=C\:
j2sdk1.4.2_09
jre
lib
endorsedos.arch=x86java.io.tmpdir=C\:
DOCUME1
VIJAYV1
LOCALS1
Temp
line.separator=\r\njava.vm.specification.vendor=Sun Microsystems Inc.user.variant=os.name=Windows XPsun.java2d.fontpath=java.library.path=C\:
j2sdk1.4.2_09
bin;.;C\:
WINDOWS
system32;C\:
WINDOWS;e\:
sapdb
programs
bin;e\:
sapdb
programs
pgm;C\:
MCC18
mpasm;C\:
MCC18
bin;C\:
MCC18
mpasm;C\:
MCC18
bin;C\:
MCC18
mpasm;C\:
MCC18
bin;f\:
oracle
product
10gDSHome
jdk
jre
bin
classic;f\:
oracle
product
10gDSHome
jdk
jre
bin;f\:
oracle
product
10gDSHome
jdk
jre
bin
client;f\:
oracle
product
10gDSHome
jlib;f\:
oracle
product
10gDSHome
bin;f\:
oracle
product
10gDSHome
jre
1.1.8
bin;f\:
oracle
product
10.1.0
Db_1
bin;f\:
oracle
product
10.1.0
Db_1
jre
1.4.2
bin
client;f\:
oracle
product
10.1.0
Db_1
jre
1.4.2
bin;C\:
WINDOWS
system32;C\:
WINDOWS;C\:
WINDOWS
System32
Wbem;C\:
Program Files
Microsoft SQL Server
80
Tools
BINN;C\:
Program Files
Microsoft SQL Server
80
Tools
Binn
;C\:
WINDOWS
Microsoft.NET
Framework
v1.1.4322;F\:
maven
Maven 1.0
bin;C\:
Program Files
QuickTime
QTSystem
;C\:
MCC18
mpasm;C\:
MCC18
bin;C\:
MCC18
mpasm;C\:
MCC18
bin;C\:
MCC18
mpasm;C\:
MCC18
bin;java.specification.name=Java Platform API Specificationjava.class.version=48.0java.util.prefs.PreferencesFactory=java.util.prefs.WindowsPreferencesFactoryos.version=5.1user.home=C\:
Documents and Settings
vijay vijayakumaruser.timezone=America/Los_Angelesjava.awt.printerjob=sun.awt.windows.WPrinterJobfile.encoding=Cp1252java.specification.version=1.4java.class.path=C\:/DOCUME1/VIJAYV1/LOCALS~1/Temp/sapinst_exe.5432.1167783061/JAR/ins-j2ee.jaruser.name=vijay vijayakumarjava.vm.specification.version=1.0java.home=C\:
j2sdk1.4.2_09
jresun.arch.data.model=32user.language=enjava.specification.vendor=Sun Microsystems Inc.awt.toolkit=sun.awt.windows.WToolkitjava.vm.info=mixed modejava.version=1.4.2_09java.ext.dirs=C\:
j2sdk1.4.2_09
jre
lib
extsun.boot.class.path=C\:
j2sdk1.4.2_09
jre
lib
rt.jar;C\:
j2sdk1.4.2_09
jre
lib
i18n.jar;C\:
j2sdk1.4.2_09
jre
lib
sunrsasign.jar;C\:
j2sdk1.4.2_09
jre
lib
jsse.jar;C\:
j2sdk1.4.2_09
jre
lib
jce.jar;C\:
j2sdk1.4.2_09
jre
lib
charsets.jar;C\:
j2sdk1.4.2_09
jre
classesjava.vendor=Sun Microsystems Inc.file.separator=
java.vendor.url.bug=http\://java.sun.com/cgi-bin/bugreport.cgisun.io.unicode.encoding=UnicodeLittlesun.cpu.endian=littlesun.cpu.isalist=pentium i486 i386
INFO 2007-01-02 16:13:25
Execute step setNWOption of component |NW_Java_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_getJavaHome|ind|ind|ind|ind|0|0.
INFO 2007-01-02 16:13:26
Execute step collect of component |NW_Java_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_GetSidNoProfiles|ind|ind|ind|ind|1|0.
ERROR 2007-01-02 16:13:28
FJS-00003 TypeError: this._name has no properties (in script NW_Java_OneHost|ind|ind|ind|ind, line 8987: ???)
ERROR 2007-01-02 16:13:29
FCO-00011 The step collect with step key |NW_Java_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_GetSidNoProfiles|ind|ind|ind|ind|1|0|collect was executed with status ERROR .

SAP NW2004s ABAP Trial SP11 installation problem

Hello together,
i have a problem, i hope you can help me!
By starting the SAPGui 710 i get this error message:
"partner 'kevkev1:sapdp00' not reached WSAECONNREFUSED:Connection refused..."
I`ve made the following Input in New Entry:
Beschreibung: NSP localhost
Anwendungsserver: kevkev1 (I also tried "localhost" instead of "kevkev1, but it doesn`t work")
Systemnummer: 00
Systemid: NSP
My Hosts-Datei has the following Inputs:
127.0.0.1(was given, but i also tried without that, only with kevke1) localhost
10.10.0.10(Createt with Loopback) kevkev1
My PCName(Computername) is kevkev1. I don`t have a Domain.
Can somebody help me please!

Hello Kevin,
I moved this to a new thread as the previous was solved.
Are you sure the application server is running properly? (Check with SAP Management Console that all lights are green).
If the server is up and running, try to open this URL on the PC running the Trial Version:
<a href="http://localhost:8000/sap/bc/gui/sap/its/webgui?sap-client=000">http://localhost:8000/sap/bc/gui/sap/its/webgui?sap-client=000</a>
What happens if you open the link?
Kind regards,
Klaus

Netweaver trial software installation problem.

Hi i am posting this first time so if any mistake in reposting sorry.
i am trying to install NetWeaver 7.10 trial version, on my lap top
Win VISTA, 2 gb memory, 31gb free HardDrive space. i tried to install several times
but no avail.
here is the log file. if any one can help me i would really appreciate it. thank you.
(May 19, 2009 5:57:39 AM), Install, com.sap.installshield.CheckServicesAction, err, CheckServicesAction(bean17): Expected service (SAPNSP_00) is not currently running
(May 19, 2009 5:57:39 AM), Install, com.sap.installshield.CheckServicesAction, wrn, CheckServicesAction(bean17): Service SAPNSP_00 is not available, retry after 10 s.
(May 19, 2009 5:57:49 AM), Install, com.sap.installshield.CheckServicesAction, err, CheckServicesAction(bean17): Expected service (SAPNSP_00) is not currently running
(May 19, 2009 5:57:49 AM), Install, com.sap.installshield.CheckServicesAction, wrn, CheckServicesAction(bean17): Service SAPNSP_00 is not available, retry after 10 s.
(May 19, 2009 5:57:59 AM), Install, com.sap.installshield.CheckServicesAction, err, CheckServicesAction(bean17): Expected service (SAPNSP_00) is not currently running
(May 19, 2009 5:57:59 AM), Install, com.sap.installshield.CheckServicesAction, wrn, CheckServicesAction(bean17): Service SAPNSP_00 is not available, retry after 10 s.
(May 19, 2009 5:58:09 AM), Install, com.sap.installshield.CheckServicesAction, err, CheckServicesAction(bean17): Expected service (SAPNSP_00) is not currently running
(May 19, 2009 5:58:09 AM), Install, com.sap.installshield.CheckServicesAction, wrn, CheckServicesAction(bean17): Service SAPNSP_00 is not available, retry after 10 s.
(May 19, 2009 5:58:19 AM), Install, com.sap.installshield.CheckServicesAction, err, CheckServicesAction(bean17): Expected service (SAPNSP_00) is not currently running
(May 19, 2009 5:58:19 AM), Install, com.sap.installshield.CheckServicesAction, wrn, CheckServicesAction(bean17): Service SAPNSP_00 is not available, retry after 10 s.
(May 19, 2009 5:58:29 AM), Install, com.sap.installshield.CheckServicesAction, err, CheckServicesAction(bean17): Expected service (SAPNSP_00) is not currently running
(May 19, 2009 5:58:29 AM), Install, com.sap.installshield.CheckServicesAction, wrn, CheckServicesAction(bean17): Service SAPNSP_00 is not available, retry after 10 s.
(May 19, 2009 5:58:39 AM), Install, com.sap.installshield.CheckServicesAction, err, An error occurred and product installation failed. Look at the log file C:\SAP\NSP\log.txt for details.
(May 19, 2009 5:58:39 AM), Install, com.sap.installshield.CheckServicesAction, err, ProductException: (error code = 601; message="Services failed to start (see the log for details)")
STACK_TRACE: 12
ProductException: (error code = 601; message="Services failed to start (see the log for details)")
at com.sap.installshield.CheckServicesAction.install(CheckServicesAction.java:95) at com.installshield.product.service.product.PureJavaProductServiceImpl.installProductAction(Unknown Source) at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.getResultForProductAction(Unknown Source)at com.installshield.product.service.product.InstallableObjectVisitor.visitComponent(Unknown Source)at com.installshield.product.service.product.InstallableObjectVisitor.visitInstallableComponents(Unknown Source)at com.installshield.product.service.product.InstallableObjectVisitor.visitProductBeans(Unknown Source)at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.install(Unknown Source)at com.installshield.product.service.product.PureJavaProductServiceImpl$Installer.execute(Unknown Source)
at com.installshield.wizard.service.AsynchronousOperation.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)
(May 19, 2009 5:58:40 AM), Install, com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct, err, An error occurred and product uninstallation failed. Look at the log file C:\SAP\NSP\log.txt for details.
(May 19, 2009 5:58:40 AM), Install, com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles, err, ProductException: (error code = 200; message="Java error"; exception = [java.lang.Exception])
STACK_TRACE: 15
ProductException: (error code = 200; message="Java error"; exception = [java.lang.Exception])
at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.execute(StepWrapperInstallFiles.java:254)
at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.executeAllSteps(StepWrapperInstallFiles.java:224)
at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.executeAllUninstallationSteps(StepWrapperInstallFiles.java:192)
at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.uninstall(StepWrapperInstallFiles.java:313)
at com.installshield.product.service.product.PureJavaProductServiceImpl.uninstallProductAction(Unknown Source) at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.processActionsFailed(Unknown Source) at com.installshield.product.service.product.InstallableObjectVisitor.visitComponent(Unknown Source) at com.installshield.product.service.product.InstallableObjectVisitor.visitInstallableComponents(Unknown Source) at com.installshield.product.service.product.InstallableObjectVisitor.visitProductBeans(Unknown Source) at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.install(Unknown Source) at com.installshield.product.service.product.PureJavaProductServiceImpl$Installer.execute(Unknown Source) at com.installshield.wizard.service.AsynchronousOperation.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)

I dont know how to start manyally. SAP<SID>_##.
This is the message file there were many of these this is one of the two files that were .dat
C:\SAP\NSP\DVEBMGS00\work\sapstartsrv
trc file: "sapstartsrv.log", trc level: 0, release: "701"
pid 2480
Fri May 22 11:56:38 2009
SAP HA Trace: Build in SAP Microsoft Cluster library '701, patch 7, changelist 998326' initialized
Initializing SAPControl Webservice
SapSSLInit failed => https support disabled
Starting WebService Named Pipe thread
Starting WebService thread
Webservice named pipe thread started, listening on port
.\pipe\sapcontrol_00
Webservice thread started, listening on port 50013
Irfan-PC\Irfan is starting SAP System at 2009/05/22 12:14:49
SAP HA Trace: FindClusterResource: OpenCluster failed: 1060 [sapwinha.cpp, line 212]
SAP HA Trace: SAP_HA_FindSAPInstance returns: SAP_HA_FAIL [sapwinha.cpp, line 907]
Irfan-PC\Irfan is sending signal 17 to process 2792

CS6 trial version installation problems

I am having trouble installing Indesign CS6. I have a macbook air OS X, version 10.8.1
I have waited for 12 hours to the program to download. It finished and I saw a window that showed that the program was opening but the problem is that at the end a window appeared with "sum is not valid". So I cannot open it. I don´t get it, what did I do wrong? Please help!

It seems that the download might have become corrupt during download. It may happen due to a spotty or slow internet connection.
You could try disabling the Veryify Checksum option under disk utilities and retry running the installer.
If that does not help, I'm afraid, you might have to download again. If you have the option, use a wired connection rather than a wireless one.
If your internet connections is too slow, the problem may reoccur. Coudl you let us know what type of internet connection do you have?

Illustrator Trial Version Installation Problem

I am installing Illustrator trial version, it stopped at 34% when installing AdobeHelp, the remaining minute keep increasing from 8 minutes to 132 minutes, I have stopped and restart my computer and re-install yet same problem occur again. should I stop or continue?

Dear Rave,
Good day to you!
Thank you for your promptly reply.
I have manage to download CS5 Illustrator instead, and I need to manually
select those files to be installed, that including AdobeHelp, Adobe
Download Assistant, Adobe Air, Adobe Media Player, then the entire
download is completed finally.
I am still keen to install CS6 to try when I have the time to do so, I
hope by then I can solve all problem.
Thanks & Best Regards,
Robin Ong
<Signature with personal contact information removed by Moderator>

NetWeaver 7.0 ABAP Trial SP12 - installation problems

Hi
I have been struggeling a lot with the installation of NetWeaver 7.0 ABAP Trial SP12. I have installed and uninstalled serveral times with no luck - I have used the SAP clean up tool, RegCleaner and deleted SAP entries my self in regedit.
The installation only takes a few minutes now before the installation is complete and it asks me if I would like to start the app server and the SAP management console - when I then choose continue it fails.
Im pretty surprised that the maxdb is not installed - even though that I have uninstalled it before the reinstallation attempts.
I would like to start over from scratz - is it possible somehow (so that the maxdb is installaded again and so on) or is there something else that I should try?
I have tried to do the setup mentioned in the troubleshooting guide (https://www.sdn.sap.com/irj/sdn/downloaditem?rid=/library/uuid/6055f523-df6e-2910-f0bf-acccbb0a7d37) and searched this forum, but I cannot make it work.
Kind regards,
Torben
D:SAPNSPlog.txt
(Oct 28, 2007 6:40:23 PM), Install, com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles, err, An error occurred and product installation failed. Look at the log file D:SAPNSPlog.txt for details.
(Oct 28, 2007 6:40:23 PM), Install, com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles, err, ProductException: (error code = 200; message="Java error"; exception = [java.lang.Exception])
STACK_TRACE: 15
ProductException: (error code = 200; message="Java error"; exception = [java.lang.Exception])
 at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.execute(StepWrapperInstallFiles.java:254)
 at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.executeAllSteps(StepWrapperInstallFiles.java:224)
 at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.executeAllInstallationSteps(StepWrapperInstallFiles.java:177)
 at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.install(StepWrapperInstallFiles.java:268)
 at com.installshield.product.service.product.PureJavaProductServiceImpl.installProductAction(Unknown Source)
 at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.getResultForProductAction(Unknown Source)
 at com.installshield.product.service.product.InstallableObjectVisitor.visitComponent(Unknown Source)
 at com.installshield.product.service.product.InstallableObjectVisitor.visitInstallableComponents(Unknown Source)
 at com.installshield.product.service.product.InstallableObjectVisitor.visitProductBeans(Unknown Source)
 at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.install(Unknown Source)
 at com.installshield.product.service.product.PureJavaProductServiceImpl$Installer.execute(Unknown Source)
 at com.installshield.wizard.service.AsynchronousOperation.run(Unknown Source)
 at java.lang.Thread.run(Unknown Source)
(Oct 28, 2007 6:40:46 PM), Install, com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct, err, An error occurred and product uninstallation failed. Look at the log file D:SAPNSPlog.txt for details.
(Oct 28, 2007 6:40:46 PM), Install, com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles, err, ProductException: (error code = 200; message="Java error"; exception = [java.lang.Exception])
STACK_TRACE: 15
ProductException: (error code = 200; message="Java error"; exception = [java.lang.Exception])
 at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.execute(StepWrapperInstallFiles.java:254)
 at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.executeAllSteps(StepWrapperInstallFiles.java:224)
 at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.executeAllUninstallationSteps(StepWrapperInstallFiles.java:192)
 at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.uninstall(StepWrapperInstallFiles.java:313)
 at com.installshield.product.service.product.PureJavaProductServiceImpl.uninstallProductAction(Unknown Source)
 at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.processActionsFailed(Unknown Source)
 at com.installshield.product.service.product.InstallableObjectVisitor.visitComponent(Unknown Source)
 at com.installshield.product.service.product.InstallableObjectVisitor.visitInstallableComponents(Unknown Source)
 at com.installshield.product.service.product.InstallableObjectVisitor.visitProductBeans(Unknown Source)
 at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.install(Unknown Source)
 at com.installshield.product.service.product.PureJavaProductServiceImpl$Installer.execute(Unknown Source)
 at com.installshield.wizard.service.AsynchronousOperation.run(Unknown Source)
 at java.lang.Thread.run(Unknown Source)
D:SAPNSPhomeinstall.log
Start external command...
Active Loglevel: 4
ACTION: **********************************************************************
ACTION: * Install SAP J2EE Engine 4 Web Application Server 700/710/720 ... XXX
ACTION: *
ACTION: * Executing Step: CreateDirectories
ACTION: * User: Torben.R.Pedersen
ACTION: * WorkingDirectory: D:SAPNSPhome
ACTION: * Date: 2007.10.28 18:38:57
ACTION: * Logfile: steps.CreateDirectories.log
ACTION: * Property File: D:SAPNSPhomej2eeinst.props
ACTION: * Tool Version: 720.26.20070619102924
ACTION: **********************************************************************
SUCCESS: Execution of step: >> CreateDirectories <<
 finished successfully.
 Elapsed time: 00:00:00 [HH:mm:ss]
Process exited with rc: 0
Start external command...
Active Loglevel: 4
ACTION: **********************************************************************
ACTION: * Install SAP J2EE Engine 4 Web Application Server 700/710/720 ... XXX
ACTION: *
ACTION: * Executing Step: CopyExecutables
ACTION: * User: Torben.R.Pedersen
ACTION: * WorkingDirectory: D:SAPNSPhome
ACTION: * Date: 2007.10.28 18:38:58
ACTION: * Logfile: steps.CopyExecutables.log
ACTION: * Property File: D:SAPNSPhomej2eeinst.props
ACTION: * Tool Version: 720.26.20070619102924
ACTION: **********************************************************************
COPY_EXECUTABLES: Copy log converter (lc.jar) to users home directory
COPY_EXECUTABLES: Copy SDC log viewer (slv.jar) to users home directory
COPY_EXECUTABLES: Prepare environment for engine configuration:
COPY_EXECUTABLES: Copy jperflib.dll to actual working dir.
COPY_EXECUTBLES: Create startup and stop scripts in engine bin folder.
copyFileWithProcessing(D:SAPNSPhomeadditional_sw _startSystem.cmd,D:SAPNSPSYSexe
un,startSystem.cmd)
Reading file D:SAPNSPhomeadditional_sw _startSystem.cmd
Keys:
Sections to process:
copyFileWithProcessing(D:SAPNSPhomeadditional_sw _stopSystem.cmd,D:SAPNSPSYSexe
un,stopSystem.cmd)
Reading file D:SAPNSPhomeadditional_sw _stopSystem.cmd
Keys:
Sections to process:
copyFileWithProcessing(D:SAPNSPhomeadditional_sw _strdbsj2ee.cmd,D:SAPNSPSYSexe
un,strdbsj2ee.cmd)
Reading file D:SAPNSPhomeadditional_sw _strdbsj2ee.cmd
Keys:
Sections to process:
COPY_EXECUTABLES: Finished ....
SUCCESS: Execution of step: >> CopyExecutables <<
 finished successfully.
 Elapsed time: 00:00:00 [HH:mm:ss]
Process exited with rc: 0
Start external command...
Active Loglevel: 4
ACTION: **********************************************************************
ACTION: * Install SAP J2EE Engine 4 Web Application Server 700/710/720 ... XXX
ACTION: *
ACTION: * Executing Step: AdaptProfiles
ACTION: * User: Torben.R.Pedersen
ACTION: * WorkingDirectory: D:SAPNSPhome
ACTION: * Date: 2007.10.28 18:39:00
ACTION: * Logfile: steps.AdaptProfiles.log
ACTION: * Property File: D:SAPNSPhomej2eeinst.props
ACTION: * Tool Version: 720.26.20070619102924
ACTION: **********************************************************************
Adding to classpath: D:SAPNSPSYSexe
unjenqulib.jar
Adding to classpath: D:SAPNSPSYSexe
unjperflib.jar
Adding to classpath: D:SAPNSPSYSexe
unjstartup.jar
Adding to classpath: D:SAPNSPSYSexe
unjstartupapi.jar
Adding to classpath: D:SAPNSPSYSexe
unjstartupimpl.jar
Adding to classpath: D:SAPNSPSYSexe
unservicehttpsapmcfrog.jar
Adding to classpath: D:SAPNSPSYSexe
unservicehttpsapmcsapmc.jar
Adding to classpath: D:SAPNSPSYSexe
unservicehttpsapmcsapmcsoap.jar
Adding to classpath: D:SAPNSPSYSexe
unservicehttpsapmcsapmcswing.jar
Adding to classpath: D:SAPNSPSYSexe
unservicehttpsapmcsoapclient.jar
ADAPT_PROFILES: Start to create the profiles
CONFIGURATION: Create JDBC Path in J2EE installation directory.
CONFIGURATION: New JDBC Path: D:SAPNSPDVEBMGS00j2eejdbc (Exist=false)
CONFIGURATION: Old JDBC Path: D:SAPNSPDVEBMGS00j2ee (Exist=false)
CONFIGURATION: New JDBC Path created.
CONFIGURATION: Copy Jars from: D:SAPNSP\_installTempj2eeINSTALLERCOMMONJDBCADA
CONFIGURATION: to : D:SAPNSPDVEBMGS00j2eejdbc
ADAPT_PROFILES: Create profiles for standalone J2EE
copyFileWithProcessing(additional_sw/t_DEFAULT_PFL_710,D:SAPNSPSYSprofile,DEFAULT.PFL)
Reading file additional_sw/t_DEFAULT_PFL_710
Keys:
Sections to process:
[JDK_CONTAINER, WITHOUT_SHARE]
copyFileWithProcessing(additional_sw/t_START_INSTANCE_HOST_710,D:SAPNSPSYSprofile,START_DVEBMGS00_HUB7380B2F)
Reading file additional_sw/t_START_INSTANCE_HOST_710
Keys:
 WITHOUT_SHARE
Sections to process:
[JDK_CONTAINER, WITHOUT_SHARE]
finished reading Section WITHOUT_SHARE
copyFileWithProcessing(additional_sw/t_SID_INSTANCE_HOST_710,D:SAPNSPSYSprofile,NSP_DVEBMGS00_HUB7380B2F)
Reading file additional_sw/t_SID_INSTANCE_HOST_710
Keys:
 WITHOUT_SHARE
Sections to process:
[JDK_CONTAINER, WITHOUT_SHARE]
finished reading Section WITHOUT_SHARE
copyFileWithProcessing(additional_sw/t_START_DB_INIT_710,D:SAPNSPSYSprofile,START_DVEBMGS00_HUB7380B2F)
Reading file additional_sw/t_START_DB_INIT_710
Keys:
 WITHOUT_SHARE
Sections to process:
[JDK_CONTAINER, WITHOUT_SHARE]
finished reading Section WITHOUT_SHARE
copyFileWithProcessing(additional_sw/t_strdbmsONCE.cmd,D:SAPNSP/SYS/exe/run/,strdbmsONCE.cmd)
Reading file additional_sw/t_strdbmsONCE.cmd
Keys:
Sections to process:
[JDK_CONTAINER, WITHOUT_SHARE]
copyFileWithProcessing(additional_sw/t_setsapenv.cmd,D:SAPNSP/SYS/exe/run/,setsapenv.cmd)
Reading file additional_sw/t_setsapenv.cmd
Keys:
Sections to process:
[JDK_CONTAINER, WITHOUT_SHARE]
SUCCESS: Execution of step: >> AdaptProfiles <<
 finished successfully.
 Elapsed time: 00:00:02 [HH:mm:ss]
Process exited with rc: 0
Start external command...
Active Loglevel: 4
ACTION: **********************************************************************
ACTION: * Install SAP J2EE Engine 4 Web Application Server 700/710/720 ... XXX
ACTION: *
ACTION: * Executing Step: AddToServices
ACTION: * User: Torben.R.Pedersen
ACTION: * WorkingDirectory: D:SAPNSPhome
ACTION: * Date: 2007.10.28 18:39:03
ACTION: * Logfile: steps.AddToServices.log
ACTION: * Property File: D:SAPNSPhomej2eeinst.props
ACTION: * Tool Version: 720.26.20070619102924
ACTION: **********************************************************************
AddToServices: Instance shall not be started by default.
AddToServices: Therefore we provide a start script in:
AddToServices: D:SAPNSPhomestartEngine.bat
AddToServices: Service will be created.
DEBUG: Register service with the following command:
DEBUG: "D:SAPNSPSYSexe
un/sapstartsrv.exe" -r -q -s NSP -n 00 -p D:SAPNSPSYSprofileSTART_DVEBMGS00_HUB7380B2F
Start external command...
Service succesfully installed.
Process exited with rc: 0
SUCCESS: Execution of step: >> AddToServices <<
 finished successfully.
 Elapsed time: 00:00:10 [HH:mm:ss]
Process exited with rc: 0
Start external command...
Active Loglevel: 4
ACTION: **********************************************************************
ACTION: * Install SAP J2EE Engine 4 Web Application Server 700/710/720 ... XXX
ACTION: *
ACTION: * Executing Step: StartSCSInstance
ACTION: * User: Torben.R.Pedersen
ACTION: * WorkingDirectory: D:SAPNSPhome
ACTION: * Date: 2007.10.28 18:39:14
ACTION: * Logfile: steps.StartSCSInstance.log
ACTION: * Property File: D:SAPNSPhomej2eeinst.props
ACTION: * Tool Version: 720.26.20070619102924
ACTION: **********************************************************************
Adding to classpath: D:SAPNSPSYSexe
unjenqulib.jar
Adding to classpath: D:SAPNSPSYSexe
unjperflib.jar
Adding to classpath: D:SAPNSPSYSexe
unjstartup.jar
Adding to classpath: D:SAPNSPSYSexe
unjstartupapi.jar
Adding to classpath: D:SAPNSPSYSexe
unjstartupimpl.jar
Adding to classpath: D:SAPNSPSYSexe
unservicehttpsapmcfrog.jar
Adding to classpath: D:SAPNSPSYSexe
unservicehttpsapmcsapmc.jar
Adding to classpath: D:SAPNSPSYSexe
unservicehttpsapmcsapmcsoap.jar
Adding to classpath: D:SAPNSPSYSexe
unservicehttpsapmcsapmcswing.jar
Adding to classpath: D:SAPNSPSYSexe
unservicehttpsapmcsoapclient.jar
Starting SCS-Instance
Executing SCS-startup-command: D:SAPNSPSYSexe
unstartsap.exe name=NSP nr=00 SAPDIAHOST=HUB7380B2F
Execute in current working dir: D:SAPNSPhome
Start external command...
| / - | / - | / - | / - | / - | / - | / - | / - | / - | / - | / - | / - | / - | / - | / - | / - | / - | / - | / - | / - | / - | / - | / - | / - | / - | / - | / - | / STARTSAP continues...
Process exited with rc: 0
SUCCESS: Execution of step: >> StartSCSInstance <<
 finished successfully.
 Elapsed time: 00:00:34 [HH:mm:ss]
Process exited with rc: 0
Start external command...
Active Loglevel: 4
ACTION: **********************************************************************
ACTION: * Install SAP J2EE Engine 4 Web Application Server 700/710/720 ... XXX
ACTION: *
ACTION: * Executing Step: StopSCSInstance
ACTION: * User: Torben.R.Pedersen
ACTION: * WorkingDirectory: D:SAPNSPhome
ACTION: * Date: 2007.10.28 18:39:50
ACTION: * Logfile: steps.StopSCSInstance.log
ACTION: * Property File: D:SAPNSPhomej2eeinst.props
ACTION: * Tool Version: 720.26.20070619102924
ACTION: **********************************************************************
Checking running engine process via sapcontrol and wait for stopped
Checking on: SCS
Stop instance with cmd: D:SAPNSPSYSexe
unsapcontrol.exe -prot PIPE -nr 00 -host HUB7380B2F -function StopWait 300 10
Stop instance in directory: D:SAPNSPSYSexe
un
Start external command...
28.10.2007 18:39:51
Stop
OK
28.10.2007 18:40:01
StopWait
OK
Process exited with rc: 0
Start external command...
28.10.2007 18:40:23
GetProcessList
FAIL: Unknown error, TCP connect failed in tcp_connect()
Process exited with rc: 1
ERROR: GetProcessList rc is not 4.
ERROR: (rc == 4: GetProcessList succeeded, all processes stopped)
ERROR: Execution of step: >> StopSCSInstance <<
 failed. Execution returned: RC=100
 Elapsed time: 00:00:33 [HH:mm:ss]
Process exited with rc: 100

Hi Klaus
Thanks for your reply.
I should not be nessesary with the loopback adapter in my case - my pc is connected to a network and I can access localhost. However, I have tried with and without loopback adapter.
What I did (for each time I tried to install:
Deleted installshield folder
Uninstalled maxDB
Stoped SAPNSP_00 service
Deleted SAP and SAPDB folder
Ran the SAP reg clean tool
Then I made i reboot, and installed NetWeaver 7.0 ABAP Trial SP12 once again.
In my last case I installed the loopback adapter, rebooted once again and then installed the SP12 trial. When I installated the loopback adapter I assigned ip adresse 10.10.0.10 (and subnet mask 255.255.255.0) to it and added a line (10.10.0.10 NSP) to the hosts file.
But I still get error when installation has finished:
D:\SAP\NSP\log.txt
(Nov 1, 2007 7:09:14 AM), Install, com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles, err, An error occurred and product installation failed. Look at the log file d:\SAP\NSP\log.txt for details.
(Nov 1, 2007 7:09:14 AM), Install, com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles, err, ProductException: (error code = 200; message="Java error"; exception = [java.lang.Exception])
STACK_TRACE: 15
ProductException: (error code = 200; message="Java error"; exception = [java.lang.Exception])
 at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.execute(StepWrapperInstallFiles.java:254)
 at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.executeAllSteps(StepWrapperInstallFiles.java:224)
 at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.executeAllInstallationSteps(StepWrapperInstallFiles.java:177)
 at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.install(StepWrapperInstallFiles.java:268)
 at com.installshield.product.service.product.PureJavaProductServiceImpl.installProductAction(Unknown Source)
 at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.getResultForProductAction(Unknown Source)
 at com.installshield.product.service.product.InstallableObjectVisitor.visitComponent(Unknown Source)
 at com.installshield.product.service.product.InstallableObjectVisitor.visitInstallableComponents(Unknown Source)
 at com.installshield.product.service.product.InstallableObjectVisitor.visitProductBeans(Unknown Source)
 at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.install(Unknown Source)
 at com.installshield.product.service.product.PureJavaProductServiceImpl$Installer.execute(Unknown Source)
 at com.installshield.wizard.service.AsynchronousOperation.run(Unknown Source)
 at java.lang.Thread.run(Unknown Source)
(Nov 1, 2007 7:09:37 AM), Install, com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct, err, An error occurred and product uninstallation failed. Look at the log file d:\SAP\NSP\log.txt for details.
(Nov 1, 2007 7:09:37 AM), Install, com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles, err, ProductException: (error code = 200; message="Java error"; exception = [java.lang.Exception])
STACK_TRACE: 15
ProductException: (error code = 200; message="Java error"; exception = [java.lang.Exception])
 at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.execute(StepWrapperInstallFiles.java:254)
 at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.executeAllSteps(StepWrapperInstallFiles.java:224)
 at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.executeAllUninstallationSteps(StepWrapperInstallFiles.java:192)
 at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.uninstall(StepWrapperInstallFiles.java:313)
 at com.installshield.product.service.product.PureJavaProductServiceImpl.uninstallProductAction(Unknown Source)
 at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.processActionsFailed(Unknown Source)
 at com.installshield.product.service.product.InstallableObjectVisitor.visitComponent(Unknown Source)
 at com.installshield.product.service.product.InstallableObjectVisitor.visitInstallableComponents(Unknown Source)
 at com.installshield.product.service.product.InstallableObjectVisitor.visitProductBeans(Unknown Source)
 at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.install(Unknown Source)
 at com.installshield.product.service.product.PureJavaProductServiceImpl$Installer.execute(Unknown Source)
 at com.installshield.wizard.service.AsynchronousOperation.run(Unknown Source)
 at java.lang.Thread.run(Unknown Source)
D:\SAP\NSP\home\install.log:
Start external command...
Active Loglevel: 4
ACTION: **********************************************************************
ACTION: * Install SAP J2EE Engine 4 Web Application Server 700/710/720 ... XXX
ACTION: *
ACTION: * Executing Step: CreateDirectories
ACTION: * User: Torben.R.Pedersen
ACTION: * WorkingDirectory: d:\SAP\NSP\home
ACTION: * Date: 2007.11.01 07:07:45
ACTION: * Logfile: steps.CreateDirectories.log
ACTION: * Property File: D:\SAP\NSP\home\j2eeinst.props
ACTION: * Tool Version: 720.26.20070619102924
ACTION: **********************************************************************
SUCCESS: Execution of step: >> CreateDirectories <<
 finished successfully.
 Elapsed time: 00:00:00 [HH:mm:ss]
Process exited with rc: 0
Start external command...
Active Loglevel: 4
ACTION: **********************************************************************
ACTION: * Install SAP J2EE Engine 4 Web Application Server 700/710/720 ... XXX
ACTION: *
ACTION: * Executing Step: CopyExecutables
ACTION: * User: Torben.R.Pedersen
ACTION: * WorkingDirectory: d:\SAP\NSP\home
ACTION: * Date: 2007.11.01 07:07:45
ACTION: * Logfile: steps.CopyExecutables.log
ACTION: * Property File: D:\SAP\NSP\home\j2eeinst.props
ACTION: * Tool Version: 720.26.20070619102924
ACTION: **********************************************************************
COPY_EXECUTABLES: Copy log converter (lc.jar) to users home directory
COPY_EXECUTABLES: Copy SDC log viewer (slv.jar) to users home directory
COPY_EXECUTABLES: Prepare environment for engine configuration:
COPY_EXECUTABLES: Copy jperflib.dll to actual working dir.
COPY_EXECUTBLES: Create startup and stop scripts in engine bin folder.
copyFileWithProcessing(d:\SAP\NSP\home\additional_sw\t_startSystem.cmd,d:\SAP\NSP\SYS\exe\run,startSystem.cmd)
Reading file d:\SAP\NSP\home\additional_sw\t_startSystem.cmd
Keys:
Sections to process:
copyFileWithProcessing(d:\SAP\NSP\home\additional_sw\t_stopSystem.cmd,d:\SAP\NSP\SYS\exe\run,stopSystem.cmd)
Reading file d:\SAP\NSP\home\additional_sw\t_stopSystem.cmd
Keys:
Sections to process:
copyFileWithProcessing(d:\SAP\NSP\home\additional_sw\t_strdbsj2ee.cmd,d:\SAP\NSP\SYS\exe\run,strdbsj2ee.cmd)
Reading file d:\SAP\NSP\home\additional_sw\t_strdbsj2ee.cmd
Keys:
Sections to process:
COPY_EXECUTABLES: Finished ....
SUCCESS: Execution of step: >> CopyExecutables <<
 finished successfully.
 Elapsed time: 00:00:00 [HH:mm:ss]
Process exited with rc: 0
Start external command...
Active Loglevel: 4
ACTION: **********************************************************************
ACTION: * Install SAP J2EE Engine 4 Web Application Server 700/710/720 ... XXX
ACTION: *
ACTION: * Executing Step: AdaptProfiles
ACTION: * User: Torben.R.Pedersen
ACTION: * WorkingDirectory: d:\SAP\NSP\home
ACTION: * Date: 2007.11.01 07:07:47
ACTION: * Logfile: steps.AdaptProfiles.log
ACTION: * Property File: D:\SAP\NSP\home\j2eeinst.props
ACTION: * Tool Version: 720.26.20070619102924
ACTION: **********************************************************************
Adding to classpath: d:\SAP\NSP\SYS\exe\run\jenqulib.jar
Adding to classpath: d:\SAP\NSP\SYS\exe\run\jperflib.jar
Adding to classpath: d:\SAP\NSP\SYS\exe\run\jstartup.jar
Adding to classpath: d:\SAP\NSP\SYS\exe\run\jstartupapi.jar
Adding to classpath: d:\SAP\NSP\SYS\exe\run\jstartupimpl.jar
Adding to classpath: d:\SAP\NSP\SYS\exe\run\servicehttp\sapmc\frog.jar
Adding to classpath: d:\SAP\NSP\SYS\exe\run\servicehttp\sapmc\sapmc.jar
Adding to classpath: d:\SAP\NSP\SYS\exe\run\servicehttp\sapmc\sapmcsoap.jar
Adding to classpath: d:\SAP\NSP\SYS\exe\run\servicehttp\sapmc\sapmcswing.jar
Adding to classpath: d:\SAP\NSP\SYS\exe\run\servicehttp\sapmc\soapclient.jar
ADAPT_PROFILES: Start to create the profiles
CONFIGURATION: Create JDBC Path in J2EE installation directory.
CONFIGURATION: New JDBC Path: d:\SAP\NSP\DVEBMGS00\j2ee\jdbc (Exist=false)
CONFIGURATION: Old JDBC Path: d:\SAP\NSP\DVEBMGS00\j2ee (Exist=false)
CONFIGURATION: New JDBC Path created.
CONFIGURATION: Copy Jars from: d:\SAP\NSP\_installTemp\j2ee\INSTALLER\COMMON\JDBC\ADA
CONFIGURATION: to : d:\SAP\NSP\DVEBMGS00\j2ee\jdbc
ADAPT_PROFILES: Create profiles for standalone J2EE
copyFileWithProcessing(additional_sw/t_DEFAULT_PFL_710,d:\SAP\NSP\SYS\profile,DEFAULT.PFL)
Reading file additional_sw/t_DEFAULT_PFL_710
Keys:
Sections to process:
[JDK_CONTAINER, WITHOUT_SHARE]
copyFileWithProcessing(additional_sw/t_START_INSTANCE_HOST_710,d:\SAP\NSP\SYS\profile,START_DVEBMGS00_HUB7380B2F)
Reading file additional_sw/t_START_INSTANCE_HOST_710
Keys:
 WITHOUT_SHARE
Sections to process:
[JDK_CONTAINER, WITHOUT_SHARE]
finished reading Section WITHOUT_SHARE
copyFileWithProcessing(additional_sw/t_SID_INSTANCE_HOST_710,d:\SAP\NSP\SYS\profile,NSP_DVEBMGS00_HUB7380B2F)
Reading file additional_sw/t_SID_INSTANCE_HOST_710
Keys:
 WITHOUT_SHARE
Sections to process:
[JDK_CONTAINER, WITHOUT_SHARE]
finished reading Section WITHOUT_SHARE
copyFileWithProcessing(additional_sw/t_START_DB_INIT_710,d:\SAP\NSP\SYS\profile,START_DVEBMGS00_HUB7380B2F)
Reading file additional_sw/t_START_DB_INIT_710
Keys:
 WITHOUT_SHARE
Sections to process:
[JDK_CONTAINER, WITHOUT_SHARE]
finished reading Section WITHOUT_SHARE
copyFileWithProcessing(additional_sw/t_strdbmsONCE.cmd,d:\SAP\NSP/SYS/exe/run/,strdbmsONCE.cmd)
Reading file additional_sw/t_strdbmsONCE.cmd
Keys:
Sections to process:
[JDK_CONTAINER, WITHOUT_SHARE]
copyFileWithProcessing(additional_sw/t_setsapenv.cmd,d:\SAP\NSP/SYS/exe/run/,setsapenv.cmd)
Reading file additional_sw/t_setsapenv.cmd
Keys:
Sections to process:
[JDK_CONTAINER, WITHOUT_SHARE]
SUCCESS: Execution of step: >> AdaptProfiles <<
 finished successfully.
 Elapsed time: 00:00:01 [HH:mm:ss]
Process exited with rc: 0
Start external command...
Active Loglevel: 4
ACTION: **********************************************************************
ACTION: * Install SAP J2EE Engine 4 Web Application Server 700/710/720 ... XXX
ACTION: *
ACTION: * Executing Step: AddToServices
ACTION: * User: Torben.R.Pedersen
ACTION: * WorkingDirectory: d:\SAP\NSP\home
ACTION: * Date: 2007.11.01 07:07:49
ACTION: * Logfile: steps.AddToServices.log
ACTION: * Property File: D:\SAP\NSP\home\j2eeinst.props
ACTION: * Tool Version: 720.26.20070619102924
ACTION: **********************************************************************
AddToServices: Instance shall not be started by default.
AddToServices: Therefore we provide a start script in:
AddToServices: d:\SAP\NSP\home\startEngine.bat
AddToServices: Service will be created.
DEBUG: Register service with the following command:
DEBUG: "d:\SAP\NSP\SYS\exe\run/sapstartsrv.exe" -r -q -s NSP -n 00 -p d:\SAP\NSP\SYS\profile\START_DVEBMGS00_HUB7380B2F
Start external command...
Service succesfully installed.
Process exited with rc: 0
SUCCESS: Execution of step: >> AddToServices <<
 finished successfully.
 Elapsed time: 00:00:11 [HH:mm:ss]
Process exited with rc: 0
Start external command...
Active Loglevel: 4
ACTION: **********************************************************************
ACTION: * Install SAP J2EE Engine 4 Web Application Server 700/710/720 ... XXX
ACTION: *
ACTION: * Executing Step: StartSCSInstance
ACTION: * User: Torben.R.Pedersen
ACTION: * WorkingDirectory: d:\SAP\NSP\home
ACTION: * Date: 2007.11.01 07:08:02
ACTION: * Logfile: steps.StartSCSInstance.log
ACTION: * Property File: D:\SAP\NSP\home\j2eeinst.props
ACTION: * Tool Version: 720.26.20070619102924
ACTION: **********************************************************************
Adding to classpath: d:\SAP\NSP\SYS\exe\run\jenqulib.jar
Adding to classpath: d:\SAP\NSP\SYS\exe\run\jperflib.jar
Adding to classpath: d:\SAP\NSP\SYS\exe\run\jstartup.jar
Adding to classpath: d:\SAP\NSP\SYS\exe\run\jstartupapi.jar
Adding to classpath: d:\SAP\NSP\SYS\exe\run\jstartupimpl.jar
Adding to classpath: d:\SAP\NSP\SYS\exe\run\servicehttp\sapmc\frog.jar
Adding to classpath: d:\SAP\NSP\SYS\exe\run\servicehttp\sapmc\sapmc.jar
Adding to classpath: d:\SAP\NSP\SYS\exe\run\servicehttp\sapmc\sapmcsoap.jar
Adding to classpath: d:\SAP\NSP\SYS\exe\run\servicehttp\sapmc\sapmcswing.jar
Adding to classpath: d:\SAP\NSP\SYS\exe\run\servicehttp\sapmc\soapclient.jar
Starting SCS-Instance
Executing SCS-startup-command: d:\SAP\NSP\SYS\exe\run\startsap.exe name=NSP nr=00 SAPDIAHOST=HUB7380B2F
Execute in current working dir: d:\SAP\NSP\home
Start external command...
\ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | STARTSAP continues...
Process exited with rc: 0
SUCCESS: Execution of step: >> StartSCSInstance <<
 finished successfully.
 Elapsed time: 00:00:49 [HH:mm:ss]
Process exited with rc: 0
Start external command...
Active Loglevel: 4
ACTION: **********************************************************************
ACTION: * Install SAP J2EE Engine 4 Web Application Server 700/710/720 ... XXX
ACTION: *
ACTION: * Executing Step: StopSCSInstance
ACTION: * User: Torben.R.Pedersen
ACTION: * WorkingDirectory: d:\SAP\NSP\home
ACTION: * Date: 2007.11.01 07:08:52
ACTION: * Logfile: steps.StopSCSInstance.log
ACTION: * Property File: D:\SAP\NSP\home\j2eeinst.props
ACTION: * Tool Version: 720.26.20070619102924
ACTION: **********************************************************************
Checking running engine process via sapcontrol and wait for stopped
Checking on: SCS
Stop instance with cmd: d:\SAP\NSP\SYS\exe\run\sapcontrol.exe -prot PIPE -nr 00 -host HUB7380B2F -function StopWait 300 10
Stop instance in directory: d:\SAP\NSP\SYS\exe\run
Start external command...
01.11.2007 07:08:52
Stop
OK
01.11.2007 07:08:52
StopWait
OK
Process exited with rc: 0
Start external command...
01.11.2007 07:09:14
GetProcessList
FAIL: Unknown error, TCP connect failed in tcp_connect()
Process exited with rc: 1
ERROR: GetProcessList rc is not 4.
ERROR: (rc == 4: GetProcessList succeeded, all processes stopped)
ERROR: Execution of step: >> StopSCSInstance <<
 failed. Execution returned: RC=100
 Elapsed time: 00:00:22 [HH:mm:ss]
Process exited with rc: 100
Any ideas how I get it to work?
Thanks and kind regards,
Torben

Adobe XI trial version Installation problem

I have the trial version of Adobe XI. It will not complete the installation. I tried 2 times. I have XP Home, could this be the issue?

What error does it give exactly? What are the exact system specs?
Mylenium

SAP NetWeaver 7.01 ABAP Trial Version INSTALLATION PROBLEM !!!

Installation stops always when it's got 18%. The load_datasave file is getting biger and biger all the time...
Log file:
Tue Nov 04 13:39:50 CET 2008 MaxDB: Start SoftwareCheck
Tue Nov 04 13:39:50 CET 2008 MaxDB: IndepProgPath:
Tue Nov 04 13:39:50 CET 2008 MaxDB: IndepDataPath:
Tue Nov 04 13:39:50 CET 2008 MaxDB: Software doesn't exist, Variable MAXDB_SOFTW_EXISTS set to NO
Tue Nov 04 13:39:50 CET 2008 MaxDB: end of Check Section!
Tue Nov 04 13:40:50 CET 2008 MaxDB: Start of Extracting Software and Backup.
Should I wait??
I have been waiting for 3 hours till now and and there is constantly 18%
Please help;)
Edited by: Piotr Wieleba on Nov 4, 2008 4:39 PM

Hello Piotr,
I would not wait. I would start again.
Bye,
Peter

Netweaver 7.0 Trial Version Installation problem

Hi Gurus!
I'm installing the trial version but got stuck when the wizard ask for the DNS Domain Name for SAP System. I don't know what to enter.
Please Help,
Derick

Try the IP address then 127.0.0.0 , perhaps that would help.
regards,
Advait

Adobe flash CS3 professional trial version installation problem

hi,
I am trying to install the adobe flash CS3 professional
trial version on windows installed and it complains that "internet
explorer"
is opened. I killed all the processes "iexplore.exe" , it
still complains the same thing. Please let me know...am i missing
something?

Direct Download Links for Adobe Software
Mylenium

SAP Netweaver ABAP Trial 7 installation problem

Hi,
I tried installing SAP netweaver for ABAP trail in my virtual pc of windows XP. I am able to install sapinst successfully but when i am trying to install sapinstgui, I am getting error with JAVA JVM.
Program is starting... Please wait!
Path: C:\DOCUME1\ADMINI1\LOCALS~1\Temp\sapinst_exe.180.1300548127
jre\bin\java.exe
java.io.FileNotFoundException: C:\Program Files\Java\jre6\lib\security (Access is denied)
 at java.io.FileInputStream.open(Native Method)
 at java.io.FileInputStream.<init>(FileInputStream.java:106)
 at java.io.FileInputStream.<init>(FileInputStream.java:66)
 at sun.tools.jar.Main.run(Main.java:184)
 at sun.tools.jar.Main.main(Main.java:903)
The system cannot find the path specified.
C:\Program Files\Java\jre6\lib\security does not contain the needed (local_policy.jar,US_export_policy.jar ) policy jars
See also SAP note 1238121.
Exit status of child: 10

Hi Tanmaya,
You better to go for newer version of SAP GUI Currently I am using 7.20.
Thanks and Best Regards,
Faisal

I can't get any contact info for installation problem- I just bought a Mac Air and my CS5 is asking for a reinstall. Mac Air has no DVD slots. HELP I al VERY FRUSTRATED THAT ADOBE HAS NO WAY TO GET HELP

I can't get any contact info for installation problem- I just bought a Mac Air and my CS5 is asking for a reinstall. Mac Air has no DVD slots. HELP I al VERY FRUSTRATED THAT ADOBE HAS NO WAY TO GET HELP

You are right, Adobe does not support CS5 because it is no longer sold.
Simply download the trial version of CS5 from this Adobe web site and input your serial number.
Adobe - Photoshop : For Macintosh

ACS 4.2 trial ver installation problem

Similar Messages

Maybe you are looking for