ACS 5.2 - unable to delete remote log target

Hello Everyone,
I have two ACS 5.2 running as primary and secondary instances respectively. When I try to delete a remote log target under
System Administration >
... >
Configuration >
Log Configuration >
Remote Log Targets
I get the following error message...."The item you trying to delete is referenced by other items. You must remove all references to this item before it
can be deleted".
I have searched the configuration within the web gui and was unable to find anything that reference the object that I'm trying to delete. Has anyone
experienced the same thing?
Thanks.

Did you check the logging categories?
For each category check the "Remote syslog Target" tab and see if the log Target you are trying to delete appears in any of the "Selected Targets"

Similar Messages

Remote Log Targets not working in ACS

Dear all
I have 2 x ACS boxes configured as Primary & secondary.
In ACS1 - In monitoring and reports-> option I can see the User authentication, authorization and Accounting activities logs. I want to configure ACS2 as remote log server.
For that in ACS1, in System administration->Log configuration-> remote log targets->new
Added as - ACS2- 1.1.1.2 - in Advance options -
Port-20514 (default is 514, need to change to 20514 , Instructions from Cisco),
Facility mode - Level6
Maximum length -1024
In logging categoris - in Global - Edit "AAA Audit" - remote syslog Targets - i have added - Logcollector (ACS1) and ACS2.
In Log collector optin --> ACS1 is configured.
After this , i open ACS2 - Monitoring and reports optin to view the logs but when ever i click - it is diverting to ACS1.
if i change log collector in ACS1 as ACS2, i can see the logs on ACS2. so at a time i can see logs only one ACS box.
I would like to view the logs in both ACS boxes. can any one help me please.

As per Cisco, you can not able to User 2 ACS boxes simultanously to recevie log messages. Remote Log targets for Syslog Server.
so, i can't use simultanously 2 x acs boxes , i need to go for syslog server.
Chapter 19, "Understanding Logging"
Configuring Remote Log Targets
You can configure specific remote log targets (on a syslog server only) to receive the logging messages for a specific logging category. See Chapter 19, "Understanding Logging" for more information on remote log targets. See Configuring Logging Categories, page 18-25 for more information on the preconfigured ACS logging categories.
Closing this ticket.. answered by Mohammed Feroz.

Unable to delete rows from Target.

Hello everyone,
I am unable to delete rows from target data store. Here is what I have done.
Source Oracle 10g - staging 11g - Target Oracle 11g
I have implemented consistent set CDC on data model in staging and added 2 tables to CDC and turned on the journals . Both tables A and B are joined together via Column E (primary key of table A). Table A is the master table(has foreign key). Table B is child table. Target column consists of all the columns of both table A and B.
Following is what I am able to do and not to do
ABLE TO DO. If data is inserted into both or any of journalized tables I can successfully load the same in target by performing following steps. 1. Extend the consistency window at model level. Lock subscriber. Run the interface with any source table marked as Journalized data only. Unlock subscriber and purge journal.
ABLE TO DO. If data is updated in any of the journalized table, along with the steps mentioned above I can execute two interfaces. In one Interface table A marked as journalized data only Joined with table B and in second interface table B marked as Journalized data only joined to table a.
NOT ABLE TO DO If data is deleted from one or both tables it shows up as journalized data in JV$D<tablename> marked as D with date and subscriber name but when i run the interface by extending the window , locking subscriber executing both interfaces, unlock subscriber purge journals. no change takes place is Target. After unlocking subscriber step, journalized data gets removed from JV$D view. Please let me know what I am doing wrong here. How can rows delted from source can also be deleted from TARGET?
NOTE : In the flow table SYNC_JRNL_DELETES is YES
In moel under jounalized table tab Table have following order Table A folloed by Table B
Thanks in advance
Greenwich

Sorry I still do not get it. when you say "Its a legacy app", are you talking about the VB.NET app ?
If so then I repeat my self :-) Why not to connecting to the SQL server directly?
* even if you need information from several databases (for example ACCESS + SQL Server), in most cases, it is much better to connect directly and get each information to the app. Then in your app you can combine the information and analyse it
[Personal Site] [Blog] [Facebook]
Access app is the legacy app.

Nokia C3 - unable to delete call log and some mess...

Hi,
I wonder if you can help me, I have tried to delete my call log from my phone however I get an "invalid selection" error message. The logs do not have any time and date next to the names and I am unable to delete.
Also I have tried to delete some of my messages but all that has happened is the messages appear to be blank and I get the error "Error Occurred, Deletion not completed".
I have spoke to phones 4 u who I got my phone through and they have said they will have a look and it may need to go away to be sorted. I have tried a soft and hard reset but this has not worked. I was wondering if there was anything else I could try before I take it in.
Thanks in advance,
Ann

I have managed to fix the problem with the messages, I backed up messages and restored them but I am still having issues with my call log.
Can anyone please help, I really dont want to hand my phone over to phones 4 u for 10 days.
Thanks

Unable to delete archive log.

Hi,
Our database server's archive log destination is full,but after running
backup archivelog all delete input;
it's taking archive log backup,but not deleting archivelogs.
Could you suggest me what is the reason.

RMAN> backup archivelog all delete input;
Starting backup at 17-DEC-10
current log archived
using channel ORA_DISK_1
channel ORA_DISK_1: starting archive log backupset
channel ORA_DISK_1: specifying archive log(s) in backup set
input archive log thread=1 sequence=155 recid=422 stamp=737092752
input archive log thread=1 sequence=156 recid=425 stamp=737156432
input archive log thread=1 sequence=157 recid=428 stamp=737257293
input archive log thread=1 sequence=158 recid=431 stamp=737322402
input archive log thread=1 sequence=159 recid=434 stamp=737389991
input archive log thread=1 sequence=160 recid=437 stamp=737408597
input archive log thread=1 sequence=161 recid=440 stamp=737476660
input archive log thread=1 sequence=162 recid=443 stamp=737542384
input archive log thread=1 sequence=163 recid=446 stamp=737634615
input archive log thread=1 sequence=164 recid=449 stamp=737658567
input archive log thread=1 sequence=165 recid=452 stamp=737726432
input archive log thread=1 sequence=166 recid=455 stamp=737827094
input archive log thread=1 sequence=167 recid=456 stamp=737860748
input archive log thread=1 sequence=168 recid=464 stamp=737980097
input archive log thread=1 sequence=169 recid=461 stamp=737980094
input archive log thread=1 sequence=170 recid=467 stamp=737980099
input archive log thread=1 sequence=171 recid=470 stamp=737980425
input archive log thread=1 sequence=172 recid=472 stamp=737981508
input archive log thread=1 sequence=173 recid=474 stamp=737985385
channel ORA_DISK_1: starting piece 1 at 17-DEC-10
channel ORA_DISK_1: finished piece 1 at 17-DEC-10
piece handle=D:\RMAN\BACKUP\0MLVPGRB_1_1 comment=NONE
channel ORA_DISK_1: starting piece 2 at 17-DEC-10
channel ORA_DISK_1: finished piece 2 at 17-DEC-10
piece handle=D:\RMAN\BACKUP\0MLVPGRB_2_1 comment=NONE
channel ORA_DISK_1: starting piece 3 at 17-DEC-10
channel ORA_DISK_1: finished piece 3 at 17-DEC-10
piece handle=D:\RMAN\BACKUP\0MLVPGRB_3_1 comment=NONE
channel ORA_DISK_1: starting piece 4 at 17-DEC-10
channel ORA_DISK_1: finished piece 4 at 17-DEC-10
piece handle=D:\RMAN\BACKUP\0MLVPGRB_4_1 comment=NONE
channel ORA_DISK_1: starting piece 5 at 17-DEC-10
channel ORA_DISK_1: finished piece 5 at 17-DEC-10
piece handle=D:\RMAN\BACKUP\0MLVPGRB_5_1 comment=NONE
channel ORA_DISK_1: starting piece 6 at 17-DEC-10
channel ORA_DISK_1: finished piece 6 at 17-DEC-10
piece handle=D:\RMAN\BACKUP\0MLVPGRB_6_1 comment=NONE
channel ORA_DISK_1: starting piece 7 at 17-DEC-10
channel ORA_DISK_1: finished piece 7 at 17-DEC-10
piece handle=D:\RMAN\BACKUP\0MLVPGRB_7_1 comment=NONE
channel ORA_DISK_1: starting piece 8 at 17-DEC-10
channel ORA_DISK_1: finished piece 8 at 17-DEC-10
piece handle=D:\RMAN\BACKUP\0MLVPGRB_8_1 comment=NONE
channel ORA_DISK_1: starting piece 9 at 17-DEC-10
channel ORA_DISK_1: finished piece 9 at 17-DEC-10
piece handle=D:\RMAN\BACKUP\0MLVPGRB_9_1 comment=NONE
channel ORA_DISK_1: starting piece 10 at 17-DEC-10
channel ORA_DISK_1: finished piece 10 at 17-DEC-10
piece handle=D:\RMAN\BACKUP\0MLVPGRB_10_1 comment=NONE
channel ORA_DISK_1: starting piece 11 at 17-DEC-10
channel ORA_DISK_1: finished piece 11 at 17-DEC-10
piece handle=D:\RMAN\BACKUP\0MLVPGRB_11_1 comment=NONE
channel ORA_DISK_1: starting piece 12 at 17-DEC-10
channel ORA_DISK_1: finished piece 12 at 17-DEC-10
piece handle=D:\RMAN\BACKUP\0MLVPGRB_12_1 comment=NONE
channel ORA_DISK_1: starting piece 13 at 17-DEC-10
channel ORA_DISK_1: finished piece 13 at 17-DEC-10
piece handle=D:\RMAN\BACKUP\0MLVPGRB_13_1 comment=NONE
channel ORA_DISK_1: starting piece 14 at 17-DEC-10
channel ORA_DISK_1: finished piece 14 at 17-DEC-10
piece handle=D:\RMAN\BACKUP\0MLVPGRB_14_1 comment=NONE
channel ORA_DISK_1: starting piece 15 at 17-DEC-10
channel ORA_DISK_1: finished piece 15 at 17-DEC-10
piece handle=D:\RMAN\BACKUP\0MLVPGRB_15_1 comment=NONE
channel ORA_DISK_1: backup set complete, elapsed time: 00:03:41
channel ORA_DISK_1: deleting archive log(s)
archive log filename=D:\ORANT\ARCLOG3\REDO03.LOGARC00155.001 recid=422 stamp=737
092752
archive log filename=D:\ORANT\ARCLOG3\REDO03.LOGARC00156.001 recid=425 stamp=737
156432
archive log filename=D:\ORANT\ARCLOG3\REDO03.LOGARC00157.001 recid=428 stamp=737
257293
archive log filename=D:\ORANT\ARCLOG3\REDO03.LOGARC00158.001 recid=431 stamp=737
322402
archive log filename=D:\ORANT\ARCLOG3\REDO03.LOGARC00159.001 recid=434 stamp=737
389991
archive log filename=D:\ORANT\ARCLOG3\REDO03.LOGARC00160.001 recid=437 stamp=737
408597
archive log filename=D:\ORANT\ARCLOG3\REDO03.LOGARC00161.001 recid=440 stamp=737
476660
archive log filename=D:\ORANT\ARCLOG3\REDO03.LOGARC00162.001 recid=443 stamp=737
542384
archive log filename=D:\ORANT\ARCLOG3\REDO03.LOGARC00163.001 recid=446 stamp=737
634615
archive log filename=D:\ORANT\ARCLOG3\REDO03.LOGARC00164.001 recid=449 stamp=737
658567
archive log filename=D:\ORANT\ARCLOG3\REDO03.LOGARC00165.001 recid=452 stamp=737
726432
archive log filename=D:\ORANT\ARCLOG3\REDO03.LOGARC00166.001 recid=455 stamp=737
827094
archive log filename=D:\ORANT\ARCLOG1\REDO01.LOGARC00167.001 recid=456 stamp=737
860748
archive log filename=D:\ORANT\ARCLOG3\REDO03.LOGARC00168.001 recid=464 stamp=737
980097
archive log filename=D:\ORANT\ARCLOG3\REDO03.LOGARC00169.001 recid=461 stamp=737
980094
archive log filename=D:\ORANT\ARCLOG3\REDO03.LOGARC00170.001 recid=467 stamp=737
980099
archive log filename=D:\ORANT\ARCLOG3\REDO03.LOGARC00171.001 recid=470 stamp=737
980425
archive log filename=D:\ORANT\ARCLOG2\REDO02.LOGARC00172.001 recid=472 stamp=737
981508
archive log filename=D:\ORANT\ARCLOG1\REDO01.LOGARC00173.001 recid=474 stamp=737
985385
Finished backup at 17-DEC-10
Starting Control File and SPFILE Autobackup at 17-DEC-10
piece handle=D:\RMAN\BACKUP\C-1738882432-20101217-02 comment=NONE
Finished Control File and SPFILE Autobackup at 17-DEC-10

Unable to delete job logs - Error : file is corrupted or unreadable

Hi,
We are running SolMan on Windows 2003 and there are some very old job logs (dated 2009) in "F:\usr\sap\sid\SYS\global\000JOBLG\" which we are unable to remove.
The error is "The file or directory is corrupted or unreadable". Because of this, Data Protector backup always has errors.
I have run "RSBTCDEL2" but these logs were not removed.
Is there a way to remove these stubborn old job logs?
Thanks in advance

>
Sisab Nimda wrote:
> Hi,
>
> We are running SolMan on Windows 2003 and there are some very old job logs (dated 2009) in "F:\usr\sap\sid\SYS\global\000JOBLG\" which we are unable to remove.
>
> The error is "The file or directory is corrupted or unreadable". Because of this, Data Protector backup always has errors.
>
> I have run "RSBTCDEL2" but these logs were not removed.
>
> Is there a way to remove these stubborn old job logs?
>
> Thanks in advance
Hi Sisab,
Best is to determine whether you actually have the jobs from 2009 ( completed / Cancelled ones ) in your Solution manager system. If they donot exist in the job tables ( normally can be seen using transaction SM37 and a date range ), just go ahead and delete the joblogs from the OS level from 2009.
Regards
Amit

Unable to delete archive logs from primary

Dear DBAs,
I made the necessary configuration in RMAN at both site (primary and physical standby) as below:
on primary:
configure archivelog deletion policy to applied on standby;
alter system set "_log_deletion_policy"=ALL scope=spfile;
log_archive_dest_10=LOCATION=USE_DB_RECOVERY_FILE_DEST VALID_FOR=(ALL_LOGFILES,ALL_ROLES) DB_UNIQUE_NAME=ora10cs1
log_archive-dest_1=service="(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=tcp)
(HOST=LBLX-ORA10-SCS1)(PORT=1521)))(CONNECT_DATA=(SERVICE_NAME=ora10scs1_XPT)(INSTANCE_NAME=ora10cs1)(SERVER=dedicated)))",
ARCH SYNC NOAFFIRM delay=0 OPTIONAL max_failure=0 max_connections=1 reopen=300 db_unique_name="ora10scs1" register net_timeout=180 valid_for=
(online_logfile,primary_role)
at standby:
configure archivelog deletion policy to none;
By the way i'm using Oracle 10gR2 patch4 on RHEL 5
and till now the database won't delete the archivelogs automaticaly, since the current available size in the flash folder is only 2MB.
Please waiting your advice
Thx in advance

Hi,
I have a different issue, I am not sure i can combine on the same thread.
From the DOC, this command is appeared to be useful. I am not sure if it can be applied to my environment.
CONFIGURE ARCHIVELOG DELETION POLICY TO APPLIED ON STANDBY
We have some databases with DG configuration on Sun. We take the backups only primary using RMAN online & archivelog alternate days. But, the archivelogs on standby are to be deleted every day manually (i mean we have a script scheduled for it).
Note: We use "delete input" on primary backup every day after they are backedup by RMAN. Anyway, the logs that are not applied on standby will not be deleted as RMAN is intelligent to keep them safe.
In the past we attempted to delete using rman script with the command shown below.
delete archivelog all completed before 'sysdate-2/24';
This causes a problem every time for us with regard to the primary database Backup as it expects the archivelogs on primay which were deleted by RMAN on standby. We had to crosscheck archivelog all every time to resolve the issue. There seems to be a mismatch of the archlog status both on primary and standby.
Please let me know if the above configuration command "CONFIGURE ARCHIVELOG DELETION POLICY " on both primary and standby or give an idea/steps what way i can use this.
Regards,
Vasu.
Edited by: vasu77 on Aug 31, 2009 4:02 PM
Edited by: vasu77 on Aug 31, 2009 4:05 PM
Edited by: vasu77 on Aug 31, 2009 4:10 PM

Unable to delete / Purge Log History

Hi,
There are some logs in my runbook that are there for the past 6 months and when i try deleting them, the system throws an error "idispatch error #3121 (8004021e31)".
Is there any other way to have it deleted maybe from SQL.
Kindly help....

Hi,
select the Orchestrator DB in SQL Management Studio when running the statement, or
use Orchestrator
exec sp_CustomLogCleanup 1,5 /* to keep the last 500 entries per Runbook */
exec sp_CustomLogCleanup 2,7 /* to keep the last 7 days per Runbook */
Regards,
Stefan
www.sc-orchestrator.eu ,
Blog sc-orchestrator.eu

Acs:Delete specific log for user X

Hi Experts
on the acs 5.2 , how to delete specific log for user X, ?
thanks
jamil

Not sure if this answers the question you are asking but the following option is available:
Monitoring Configuration > System Configuration > Collection Filters
Pres "Create" and Syslog Attribute of "User" and set the user name your are interested in
This option prevents records for this user from being collected. It does not remove any records that have already been collected

Remote Logging on CISCO 1120 ACS 5

Hi
I have configured the appliance everything is working fine
We have a remote syslog server and I have configured the remote syslog server details in the "Remote Log Targets" and and Logging Categories.
But I cannot see any logs on my syslog server
NOTE:- In the Log Collector current log collector is set as the local appliance , I am unable to change it to the remote syslog server.
kindly advice
best regards
Muralee

Hi
tks for the reply
Actually I need to update my query
Now I can see the logs are written to syslog-ng installed on my log monitoring server
We have configured our Splunk server to read the log files , but it does not appear in the searches
Further I have booked a ticket with splunk for further troubleshooting will update the thread accordingly.

Unable to delete records as the transaction log file is full

My disk is running out of space and as a result I decided to free some space by deleting old data. I tried to delete 100,000 by 100,000 as there are 240 million records to be deleted. But I am unable to delete them at once and shrinking the database doesn't
free much space. This is the error im getting at times.
The transaction log for database 'TEST_ARCHIVE' is full. To find out why space in the log cannot be reused, see the log_reuse_wait_desc column in sys.databases
How can I overcome this situation and delete all the old records? Please advice.
mayooran99

In order to delete the SQL Server need to write the information in the log file, and you do not have the place for those rows in the log file. You might succeeded to delete less in each time -> next backup the log file each time -> next shrink the
log file... but this is not the way that I would chose.
Best option is probably to add another disc (a simple disk do not cost a lot), move the log file there permanently. It will increase the database work as well (it is highly recommend not to put the log file on the same disk as the data file in most cases).
If you can't add new disk permanently then add one temporary. Then add file to the database in this disk -> create new table in this disk -> move all the data that you do
not want to delete to the new table -> truncate the current table -> bring back the data om the new table -> drop the new table and the new file to release the temporary disk.
Are you using full mode or simple recovery mode ?
* in full mode you have to backup the log file if you want to shrink it
Ronen Ariely
[Personal Site] [Blog] [Facebook]

Remote Logging for ACS

I am testing remote logging in ACS. Is it by design that logging from all ACS appliances goes to the same files configured by the Configuration Provider? Whatever is specified in the other ACS appliances is ignored and all entries from all appliances end up being logged to the same file.
Just would like confirmation. Thanks.

Hi
There are some real problems with remote logging:
1) Requires a dedicated server to receive logs
2) Not all logs are supported
3) Constant increased traffic over WAN
4) Added CPU burden on each ACS
5) Increased latency in AAA responses from ACS
Take a look at CSVSYNC. Its our answer to all these issues. A simple CLI driven .exe that can connect via HTTP(s) to any number of ACSs (software and appliace) and pull down *all* csv logs.
It can be scheduled and scripted to run at quiet times.
Regards
Darran
www.extraxi.com/utils.htm

ACS SE 4.01 crashing when enabled remote logging

We are running acs se 4.01 and whenever i turn on the remote logging to our agent, the ACS itself becomes unusable until I turn logging off again. Any ideas?

Hi
If you mean, that as soon as you enable remote logging, authentication starts failing, then there are some issues with remote logging.
Also consider upgrading to latest ACS version, rather then being on 4.0(1)
CSCeg40355 : Authentication failures when remote logging fails
I am pretty sure its resolved in 4.1.1
http://tools.cisco.com/Support/BugToolKit/action.do?hdnAction=searchBugs
Be sure to use same remote agent version, as your ACS server software version.
Regards,
Prem

BOBJ is unable to delete file from OFRS

System Info:
Business Objects Enterprise XI3.1 SP3 FP3.2
Windows 2003 Server Enterprise Edition SP3
Oracle 10.2
Java 1.6.0_20
APACHE Tomcat 5.5.20
2 clustered servers
FRS located on SAN Disk Drive connected to primary server (Winchester1)
We use WebIntelligence exclusivly.
We are receiving the following error in our event log on our clustered server:
Source: BusinessObjects_CMS
Category: General
Type: Warning
Event ID: 33018
Computer: Winchester2
Unable to delete file from the file repository. Make sure a File Repository Server is running and registered and enabled. Details : Failed to connect to the File Repository Server output. Make sure the server is up and running.
We have verified the FRS is running and we are able to connect to it from our clustered server (Winchester2). The security settings are set to full control for the admin group and the users have Read/Write access to the file store folders. The errors are filling up our event logs and causing issues with the servers. this appears to be happening each morning and the file it is trying to delete is an .xls file.
We have a ticket open with SAP Support but they are just as baffled as we are and keep sending us from one group to another and tell us they need to look at it on thier end and they will get back to us.
Has anyone had this happen on their system?

Hi Richard, did you ever get this issue resolved? We are having a similar issue on XI R3 SP4 using NAS/CIFS shares for our File Stores. We see this issue mainly after our servers are patched and a full environment restart is initiated. Like you, our event logs fill up with so many error messages I cannot pinpoint exactly when the issue starts happening.
Any help would be much appreciated.

Unable to delete file on NW6.5 sp8.

I'm unable to delete a file on a NW6.5 sp8 server.
This is only a copy, so it's not mission critical, but it's starting to frustrate the hell out of me!
A colleague was given a helpdesk problem about a misbehaving pdf, he made a copy of the pdf in a different directory to do some testing but now finds that he cannot delete this copy!
I've tried deleting it using Windows Explorer, Dos, Filer.Exe, Console One, and possibly one or 2 others. I get various errors but they all seem to infer that either I'm using a user who doesn't have the necessary rights (I'm using our standard admin user, so that shouldn't be the problem) or that the file is in use by others. Using the JRBUtil 'Openfile.exe', I find that the file is being used by 4 instances of my admin user.
If I try and disconnect these instanceswith 'Openfile.exe', I get confirmation that the connections have been terminated, but I'm still not able to delete the file. If I go back to 'Openfile.exe' it tells me that the same 4 connections (same connection numbers throughout) are still in use! If I try to close the connections using the Console Monitor then it appears to close the connections, they disappear from the list and if I re-check then they are still not visible, but if I go back to 'Openfile.exe' then it reports that the connections are still current! I've tried using iManage to close the connections, but with no success!
The server in question is our main data server so the chances of rebooting it just because it 'may' fix this problem is unlikely to happen.
Again it's only a copy and not mission critical, but it would be good to find an answer to this. So, is there a command or utility that will just delete a file when asked?
Many thanks
Ian.

Originally Posted by dgersic
On Tue, 27 Sep 2011 10:56:02 +0000,
If the server thinks the file is open / locked, you will not be able to
delete it without resolving that first. You could try dismounting the
volume, which should force the OS to close the file.
David
I think that it is this open / locked issue that is causing the problem. The idea of dismounting the volume sounds like a less brutal version of my original idea of having to reboot the server to clear the connections.
However, as I said to Tom above, I've got to try and get this past the server admin, and as this is only a copy on our main data server which is in constant use, I'm not sure that I'll get permission to try this. Unfortunately I think that I may have to accept that I'll have to wait until the server is taken down for a more important reason. Frustrating, but that's life.
So, thanks to all who replied and for the suggestions. I'll certainly log them for future use, so if nothing else this has been a good learning experience for me.
Ian
(Now I've just got to work out how to close this thread!)

ACS 5.2 - unable to delete remote log target

Similar Messages

Maybe you are looking for