ACS 5.3.40 is there patch available to support TLS 1.1 and 1.2 regarding SSL termination?

Hi,
We are trying to reduce our susceptibility to SSL BEAST information disclosure vulnerability regarding our ACS 5.3.40 system.
It's been suggested that we consider some defensive measures such as cipher suite selection.
Wherever possible, we should ensure that servers and clients that support TLS/SSL are configured to support TLS versions 1.1 and 1.2, not just SSLv3 and TLSv1.0 which is often the default configuration.
Can you advise how this is done within the ACS 5.3.40 application? Is it just a case of patching to another level?
(Default SSLv3 and TLSv1.0 defaults are not deemed strong enough).
Thanks.

same Question~
I believe we come from the same university~
Tsinghua, isn't it?

Similar Messages

When will there be ACR/LR support for Nikon D300 and D3?

Sorry, could not resist.

ACR/LR are hardwired to be unable to support any Nikon camera that has a "3" in the name. It would take a massive rewrite of the code to circumvent this limitation.

Are there any patches available for Dev 21

Hi,
We've been working with Forms50 and Reports 25 under win95 for
quite a while and have noticed occasional problems:
- A program abort due to page fault protection under win95.For
example, R30DES32 : R30LIB.dll.
- You issue compile all and get and error that forms is not
able to go to (goto error button).
- A compile error that requires login in and out and
recompile to fix.
I wonder if
- there are any patches available for Dev 21,
- i have a memory shortage problem,
- these are (especially case 1) win95 problems.
Please help will be welcomed ................!
null

Where can I find them?
thanks in advance,
Xiaolin
Jason Judge (guest) wrote:
: There are patches for the 32bit v2.1 Windows environments
dated:
: 24 June 98
: 5 August 98
: 16 September 98
: 21 Octomer 98
: 21 February 99
: and I believe a new one is just out.
: Take your pick!
: JJ
: Luis Medina (guest) wrote:
: : Hi,
: : We've been working with Forms50 and Reports 25 under win95
for
: : quite a while and have noticed occasional problems:
: : - A program abort due to page fault protection under
: win95.For
: : example, R30DES32 : R30LIB.dll.
: : - You issue compile all and get and error that forms is not
: : able to go to (goto error button).
: : - A compile error that requires login in and out and
: : recompile to fix.
: : I wonder if
: : - there are any patches available for Dev 21,
: : - i have a memory shortage problem,
: : - these are (especially case 1) win95 problems.
: : Please help will be welcomed ................!
null

Fresh install of trial version of Captivate 8 on OS X 10.9.3 - no previous version of Captivate on machine. I've got lots of crashing to desktop problems right off the bat. Is there a patch available?

Fresh install of trial version of Captivate 8 on OS X 10.9.3 - no previous version of Captivate on machine. I've got lots of crashing to desktop problems right off the bat. Is there a patch available? I work at a University and we're evaluating for online courseware - my last experience with Captivate was 5.0. Anyone else experience this with the trial download?

Hi there,
There is no difference in terms of usage and features between a trial version and a licensed version.
Could you tell me do you get any specific error message when it crashes, or does it crash while using a particular feature, or is it random?
Can you also try with a different user account (admin) on your MAC, check if it behaves same there?
Thanks.

Is there any patch available so i can use it in Oracle 9i Standard Edition

Incremental Backup and Recovery
Parallel DML
Parallel Query
Export/import Transportable Tablespace
these features are supported by Oracle 9i Enterprise Edition but not in Oracle 9i Standard Edition
is there any patch available so i can use it in Oracle 9i Standard Edition

A DVD is essentially a standard definition image (DV)
So, if you are not adding titles or compositing, simple DV/NTSC (or DV/PAL) will work.
If you are doing compositing, ProRes LT for standard definition would be the way to go.
x

Is there any patch available to add kosovo in Territory list?

Is there any patch available to add kosovo in Territory list?
Regards .

Please see these docs.
How to Add 'Kosovo' to FND_TERRITORIES? [ID 739280.1]
How Can A New Country Be Added To The Territories Table e.g. Serbia, Montenegro and Kosovo [ID 232508.1]
How to add 'Kosovo' to FND_TERRITORIES? [ID 564567.1]
Thanks,
Hussein

NWDS SPS 09: Jars not in external Library - Patch available?

Hello experts,
I am facing the problem described here:
https://forums.sdn.sap.com/click.jspa?searchID=131779&messageID=2755058
The result of the discussion is that the jars not being included in the external library is a bug of NWDS SP 9.
Is there already a patch available? I searched throught Service Market Place but there is only a patch for Developement Infrastructure (DI Build Tool).
Thanks for help,
Enrico Lenk.

Hi Maksim,
Here you are the content of application-j2ee-engine.xml from EAR project
<?xml version="1.0" encoding="UTF-8"?>
<application-j2ee-engine xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="application-j2ee-engine.xsd">
</application-j2ee-engine>
And just in case, content of ejb-j2ee-engine.xml from the EJB project
<?xml version="1.0" encoding="UTF-8"?>
<ejb-j2ee-engine xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="ejb-j2ee-engine_3_0.xsd">
</ejb-j2ee-engine>
Libraries i'm using are: mdm-admin.jar, mdm-common.jar, mdm-core.jar, mdm-data.jar, mdm-extension.jar, mdm-protocol.jar and mdm-publishing.jar
Not sure what's the prefered option, if use these libraries as external jars or add to my project as dependency
Thanks a lot in advance
Pablo

New Patch Available for OATS 12.1

Hi All,
There is a new patch available on metalink for 12.1 which fixes a whole bunch of issues (especially with OTM). The filename is p14159195_12101_WINNT.
Regards
Wayne.

Hi,
My apologies, the download page is currently down and I am working on getting it live again. In the meantime, you can download the patch directly using this link:
2012 SP1 f1 patch downloader
Please let me know if you have any issues accessing this link.
Al B.
Staff Software Engineer - TestStand
CTA/CLD

Are there patches to Adobe Reader 9.3.4?

Hello all!
I have a program...Secunia PSI...which states that my Adobe Reader v9.3.4 is a Category 5 Security Threat and that hackers are currently
exploiting this on the internet to gain full control over my computer. Adobe Flash Player 10 falls under the same category. Secunia shows
no patches available. I continually have problems with hackers and have turned in 2 reports to the IC3 online division of the F.B.I. over the past
year. They use routers to connect to my computer and trace, delete files, spawn programs downloaded and completely unravel my life so I know
that this warning from Secunia is real!
Any suggestions or help to this problem will be greatly appreciated!
carxy49

To: ~graffiti and jbartosch
You need to get with "eidnolb" for the correct information. I posted my same original message in the Adobe Flash Player forums and this is what I got:
"Hi. Secunia is a good site and you can feel safe doing what they suggest, especially the ones that monitor the forums.
Flash Player 10.1 is the latest release. There were many Security features included. You can read about safe browsing and some of the features:
http://www.adobe.com/devnet/flashplayer/articles/privacy_mode_fp10_1.h tml
Now here are the latest Security Updates for Flash Player and Adobe Reader:
http://www.adobe.com/support/security/index.htmlflashplayer
Hope these help you. Read the second one first.
Thanks,
eidnobl"
Everyone needs a little education every day. I hope this helps you the next time that someone else asks for help.
Sincerely,
crazy49.....and by the way, I'm a "dudette" not a "dude"

Are Oracle-Validated patches available in OEL 6?????????????

I have a plan to install OEL 6 and Oracle EBS R12 in my Server. But I need to make sure all Oracle-validated patches available in OEL 6 & I can install EBS R12 in OEL 6 properly....I had seen a mail in OTN which mentioned there is no RPMs available for OEL6 till now....
Please tell me a good Suggestion.
Arun Kurungatt

user13680387 wrote:
I have a plan to install OEL 6 and Oracle EBS R12 in my Server. But I need to make sure all Oracle-validated patches available in OEL 6 & I can install EBS R12 in OEL 6 properly....I had seen a mail in OTN which mentioned there is no RPMs available for OEL6 till now....
Please tell me a good Suggestion. OEL6 is not yet certified with Oracle Apps 11i/R12
Please refer to these docs for the list of certified Linux OS.
Oracle E-Business Suite Installation and Upgrade Notes Release 12 (12.1.1) for Linux x86 [ID 761564.1]
Oracle E-Business Suite Installation and Upgrade Notes Release 12 (12.1.1) for Linux x86-64 [ID 761566.1]
Thanks,
Hussein

ACS SE 4.1.1.23 patch 5 issue with users

HI There, I am facing very weired issue with ACS SE 4.1.1.23 patch 5. I am trying to add users in ACS it is added successfully but I can not see these users when I click list all users.
But I can see users are increasing in groups when I add users..but when I do list all users it say there are no users defined. and I tried to login with newly created users from devices ....I am able to login with those new users.....
also when I go to that particular group in which I added new users....and say list users in group...I get message from ACS saying that "can not read users from group" ....
what could be issue any one has any idea....customer complained that he was unable to login to devices...with the users created on ACS...when I saw there was no users in database....then I added 2-3 users by looking at old passed and failed authentication... but I dont know how users got deleted automatically...even I tried to see appliance audit logs...could not see any thing which indicates someone deleted users...
please help me to solve this issue..
Thanks

Issue resolved. The CRL that was being parsed from the cert was one level higher than the CRL that needed to be checked. The User CRL was ppointing to the Intermediate CA's CRL. I had to manually change the URL from this:
http://DOMAINvmsp.DOMAIN.xxxx-xx.edu/pkipub/DOMAIN%20Intermediate%20CA%201.crl
to this:
http://DOMAINvmsp.DOMAIN.xxxx-xx.edu/pkipub/DOMAIN%20User%20CA%201.crl
Mark

Patch available for JMS?

Hi,
          I am using a Weblogic Server 8.1 SP4 on my local development environment. The application has a JMS based report module. A report is created by the front-end and stored in a JMS Queue with a persistent FileStore. Once the report is created, the report is available until someone deletes the report from the Queue.
          Now the problem:
          The "new" application with reports module has been deployed to a TEST environment with WLS 8.1 SP3. The report creation works, the report is stored in the FileStore, but is accessible through the front-end only once. It is a JSP with content header (PDF) reading the byteArray Message from the Queue.
          For the second time, the result on the front-end is "NUL" (3 digits in HTML Source). When re-starting the server everything is fine again(but each report can be fetched from the Queue only once).
          Unfortunately upgrading the SP is not a solution, because the TEST and PRODUCTION environment of the client cannot be upgraded easily.
          - Is there a patch available for the problem?
          - Can anyone explain me what is the problem with that?
          - Is there a workaround?
          The servers are Windows 2003 servers...
          Thanks and regards,
          Bernhard

Hi,
          I am using a Weblogic Server 8.1 SP4 on my local development environment. The application has a JMS based report module. A report is created by the front-end and stored in a JMS Queue with a persistent FileStore. Once the report is created, the report is available until someone deletes the report from the Queue.
          Now the problem:
          The "new" application with reports module has been deployed to a TEST environment with WLS 8.1 SP3. The report creation works, the report is stored in the FileStore, but is accessible through the front-end only once. It is a JSP with content header (PDF) reading the byteArray Message from the Queue.
          For the second time, the result on the front-end is "NUL" (3 digits in HTML Source). When re-starting the server everything is fine again(but each report can be fetched from the Queue only once).
          Unfortunately upgrading the SP is not a solution, because the TEST and PRODUCTION environment of the client cannot be upgraded easily.
          - Is there a patch available for the problem?
          - Can anyone explain me what is the problem with that?
          - Is there a workaround?
          The servers are Windows 2003 servers...
          Thanks and regards,
          Bernhard

HT1338 security patch available for OS 10.4 ?

is there a security patch available for the os 10.4 imac?

No, and very, very, very, very unlikely there ever will be (Tiger support was dropped ages ago). Disable Java (Javascript is okay) in your browsers (how depends upon the browser you use -- also disable autoopen downloads); don't do anything incautious if you see sites offering to upgrade your software.
See also:
https://discussions.apple.com/thread/3855254

Msi of full version of adobe acrobat; is there one available?

We want to deploy a full version of adobe acrobat over a network and were wondering if there was an msi available for the full version of adobe acrobat? It appears there is one for the reader, version 8 and 9, but I've yet to find anything definitive for a full version of acrobat, be it standard or professional, version 8 or 9; anybody have a link? info? Thanks.
Jeff

For deploying full version of Acrobat over the network by MSI, the best approach is to create the AIP for the same. Please refer to the below mentioned link and read the steps for creating your own AIP, http://kb2.adobe.com/cps/837/cpsid_83709/attachments/Acrobat_Enterprise_Administration.pdf
For creating AIP of Acrobat 9 (English) download all the patches from below mentioned link: http://ardownload.adobe.com/pub/adobe/acrobat/win/9.x/9.1/misc/AcroProStdUpd910_T1T2_incr. msp http://ardownload.adobe.com/pub/adobe/acrobat/win/9.x/9.1.1/misc/AcrobatUpd911_all_incr.ms p
http://ardownload.adobe.com/pub/adobe/acrobat/win/9.x/9.1.2/misc/AcrobatUpd912_all_incr.ms p
http://ardownload.adobe.com/pub/adobe/acrobat/win/9.x/9.1.3/misc/AcrobatUpd913_all_incr.ms p
http://ardownload.adobe.com/pub/adobe/acrobat/win/9.x/9.2/misc/AcrobatUpd920_all_incr.msp
http://ardownload.adobe.com/pub/adobe/acrobat/win/9.x/9.3/misc/AcrobatUpd930_all_incr.msp
http://ardownload.adobe.com/pub/adobe/acrobat/win/9.x/9.3.2/misc/AcrobatUpd932_all_incr.ms p
http://ardownload.adobe.com/pub/adobe/acrobat/win/9.x/9.3.3/misc/AcrobatUpd933_all_incr.ms p
http://ardownload.adobe.com/pub/adobe/acrobat/win/9.x/9.3.4/misc/AcrobatUpd934_all_incr.ms p
Follow the steps mentioned in the Article to create AIP and I am here to help you in that if you face any issue.

Hi I want to create a search form with drop down search criteria. This form should then search on the same site and display the search results. Is there HTML available for this? Or an oline site that I can use to build this form? I created a form in Jotfo

Hi I want to create a search form with drop down search criteria. This form should then search on the same site and display the search results. Is there HTML available for this? Or an oline site that I can use to build this form? I created a form in Jotform.com, but this form doesn't search the site, instead it sends me an e-mail. Do you have a solution for me? Thanks.

Hi I want to create a search form with drop down search criteria. This form should then search on the same site and display the search results. Is there HTML available for this? Or an oline site that I can use to build this form? I created a form in Jotform.com, but this form doesn't search the site, instead it sends me an e-mail. Do you have a solution for me? Thanks.

ACS 5.3.40 is there patch available to support TLS 1.1 and 1.2 regarding SSL termination?

Similar Messages

Maybe you are looking for