ACS 5.3 - Error when changing Device group or Location

I am trying to move a device from the Default location to a sub group and get the following message when I try (either with IE or Firefox)
This System Failure occurred: Index : 0, Size: 0. Your changes have not been saved. Click OK to return to the list page.
it also gives me the same error if I try and change the Device type from default to a sub group. I'm sure I could do this previously. The ACS build is (VMWARE install):
Cisco Application Deployment Engine OS Release: 1.2
ADE-OS Build Version: 1.2.0.228
ADE-OS System Architecture: i386
Copyright (c) 2005-2009 by Cisco Systems, Inc.
All rights reserved.
Hostname: ACS1
Version information of installed applications
Cisco ACS VERSION INFORMATION
Version : 5.3.0.40
Internal Build ID : B.839
I'm suspecting it a read/write issue with the database or a database corruption. Can anyone enlighten me on how to fix it please ?
I have stopped and started the application acs via the console and show application status acs has the following to say about itself.
ACS1/admin# show application status acs
ACS role: PRIMARY
Process 'database'                  running
Process 'management'                running
Process 'runtime'                   running
Process 'view-database'             running
Process 'view-jobmanager'           running
Process 'view-alertmanager'         running
Process 'view-collector'            running
Process 'view-logprocessor'         running
Mel

Does this happen to small number of network devices or the whole set
If the former then I found the following CDETS
CSCtw59271 Random Network Device corruption after upgrade from ACS 5.2 to 5.3
Which includes the following workaround
Symptom 1: Delete and re-add the AAA client
Symptom 2:Modify the TACACS+ shared secret of the Network Device, re-enter the same key and save the Network device.
>>>> Use case where TACACS+ was used
There are some important fixes related to upgrade issues in patch 5 and later for ACS 5.3. While these do not relate to NDs I do recommend installing this patch

Similar Messages

Error while changing Account Group for Prospective Customer

Dear All,
I am getting an error when the account group of a prospective customer needs to be changed to Sold to Party
The planned change is not allowed as the following groups would be masked by the new account group,
S Group Group Name M Group Name
V D315 Shipping 030 Rail Specifications.
Please let me know what is the reason for this error and as per my knowledge even if the no range is different for both these partner functions the system should allow me to change the account group however the earlier no given to prospective customer will still exist even if the prospective customer number is changed to sold to party please let me know otherwise.
Kind Regards
Atul

Hi,
Go to KOH2
Select the order by pressing F9. Now place the cursor where you want to put the order group. i.e on same level or Lower level.
Regards,
Jigar

ERROR when repairing permissions: Group differs on "private/etc/cup"

Hi,
When I run permissions repair on my Leopard 10.5.4 I get the error message:
ERROR when repairing permissions: Group differs on "private/etc/cup", Should be 0, group is 26
Any idea why... It pops up every time I run permissions repair so I don't think it is really getting repaired.
Thanks.

Ignore it. It's been reported as a bug and is under investigation.

ACS SE: Error when changing IP setting

I got this error when trying to change the IP address setting:
Error: Failed to get NIC configuration: (null) (FFFFFFFF)
My ACS SE is now not functioning because of this. Is there any way to recover besides using the Recovery CD ?

Does this happen to small number of network devices or the whole set
If the former then I found the following CDETS
CSCtw59271 Random Network Device corruption after upgrade from ACS 5.2 to 5.3
Which includes the following workaround
Symptom 1: Delete and re-add the AAA client
Symptom 2:Modify the TACACS+ shared secret of the Network Device, re-enter the same key and save the Network device.
>>>> Use case where TACACS+ was used
There are some important fixes related to upgrade issues in patch 5 and later for ACS 5.3. While these do not relate to NDs I do recommend installing this patch

Error when creating purchasing group.

Hi,
i am facing two issue when creating purchasing group. i never had such a situation before.
i have created two p.groups successfully and moved to quality.later i figured one of them is missing USER ID now when i try to enter user ID in user column getting below mention error.
Entry XXXX Does not exist in USR02-check your entry.message no 00058.i have checked in USR02 None of ID's exist i used in newly created groups.but ID i used in other groups has no issue even doesn't exist in USR02,but it shows value US in OB(Object type filed).
both ID's are not being created in Development in other words SAP ID's with SU01 but we never had such issue before while changing or creating now purchasing group.
Another thing i have noticed that OB(Object type field is missing in Dev.) i can see that field in Quality even in sand box but not visible in Dev.that when i use OME4.but when i use SM30-V_024 i can see the OB field.Somehow OB field is hidden when going through SPRO or ME04.
This is about Sap ver.4.7
Suggestion are much appreciated.

Hi,
Before creating new purchasing groups- 1st check your user ID is authorized to purchasing groups create in t.code: OME4.
In development system you can creates new purchasing groups with USER ID and telephone numbers, upon saving system will create a transport request. Later you can transfer related transport request to quality system for your testing.
For example: You can creates new purchasing groups with USER ID and telephone numbers
Purchasing groups-------------USER ID ---------------Telephone numbers
Z01-----------------------------------USR01------------------232569875
Z02-----------------------------------USR02------------------232589876
Regards,
Biju K

Inbound Processing : Error when changing a BOM

Hi Experts,
I have the following error when I send a BOMMAT IDoc in "Change" Mode (Editing the BOM, to recreate the History inthe Target system) :
Start processing in API: CSAP_MAT_BOM_MAINTAIN
Group BOM
Changes to the BOM exist after 03.11.2008
Date 03.11.2008 copied from change number
Item (1) 0040 L 000000001084237016 000000000000000000000000 cannot be uniquely identified
Item (3) 0100 L 000000001084237021 000000000000000000000000 cannot be uniquely identified
Item (6) 0200 L 000000000768041196 000000000000000000000000 cannot be uniquely identified
End of processing in API: CSAP_MAT_BOM_MAINTAIN
Any idea ?
Regards,
David

Hi Gordon,
I think I found something.
When I create a BOM with ALE in the Target, no problem. Then when I want to update it, I've got this error ...
In the Source, we're working with Text Object for Text Item (INCLUDE Text ID). But in the Target, Text Object doesn't exist, and when we update or modify the BOM via ALE, the Inbound Process try to find the old Text Object before updating it with the new one ...
I think the solution is to create all Text Object/ID (Ta SO10) in the Target ... I don't understand why the ALE Inbound Process doesn't create Text Objects if they don't exist...
Regards,
David

UNCAUGHT_EXCEPTION runtime errors when changing the PO

Hi everyone,
We are facing the problem which is when changing the PO short dump UNCAUGHT_EXCEPTION is occurred then it will display "The page cannot be displayed"
I don't know what is the exactly that cause of this problem
Anyone who facing the same problem before, pls help on this. Hope anyone can help us on this.
Thanks,
quare

Hi Disha,
I found that only this PO cannot be change. Others are ok. There is an error in ST22 which is as below:
Runtime Errors         UNCAUGHT_EXCEPTION
Except.                CX_BBP_PD_ABORT
Error analysis
    An exception occurred. This exception is dealt with in more detail below
    . The exception, which is assinged to the class 'CX_BBP_PD_ABORT', was not
     caught,
    which led to a runtime error.
    The reason for this exception is:
    Übernehmen
After further search of error there is also message that relates to this error:
Buffer table not up to date
Message no. BBP_PD001
Diagnosis
In FORM CHANGE_VERSION_MAP_ORG (function group SAPLBBP_PDCV) an inconsistent status was discovered.
Procedure
Start the transaction again. If the error occurs again, create an OSS message.
To analyze the error, you can set a breakpoint in the function module 'BBP_PD_ABORT' and look at the call-up hierarchy in debugging mode.
I wondering what is the problem. Since it occurs not for all PO but certain PO only.
Please help.
Thanks,
quare

Why do I get a program error when changing colors?

I get a 'Could not complete your request because of a program error' when I try to change colors on both the forground/background palette or from the color picker palette. Is there a patch for this?
I am using Photoshop CS6 version 13.0.1.x64

Hi. Because this forum is for beginners trying to learn the basics of Photoshop, I'm moving your question to the Photoshop General Discussion forum.

Error while Changing IO group

HI Gurus
I facing problem while changing IO group using T code KOH2
some of the IO are gray out ,while selecting such IOs for changing its IO group System is not allowing me to select these IO and giving error 'Position cursor correctly' .
Is there is any resion that IO got gray out ?
Thanks
Avadhut

Hi,
Go to KOH2
Select the order by pressing F9. Now place the cursor where you want to put the order group. i.e on same level or Lower level.
Regards,
Jigar

Error when deleting Page Group

Hi
I got the following error when i am trying to delete a Page Group.
How can i rectify this.
Portal Version:9.0.2.2.14A
Error: An unexpected error has occurred (WWS-32100)
ORA-1: User-Defined Exception (WWC-36000)
Error while deleting page. (WWC-44130)
An unexpected error occurred: ORA-01422: exact fetch returns more than requested number of rows (WWC-44082)
And also clicking on "Actions" icon of a "Text" item in this page group, i got the following error....
Error: Item does not exist. (WWS-22507)
An unexpected error has occurred in portlet instances: ORA-01422: exact fetch returns more than requested number of rows (WWC-44846)
Any patch is available to just rectify this "Text" item related issues.....!!
Thanks&Regards
Krishna Prasad

Please report this problem to Oracle Support.
Regards,
Jerry
PortalPM

Error when installing device drivers with 8.2 update

I get the following error when I try to install the updated drivers on the device driver CD set (this is when I first insert CD 1 and click install drivers). I discovered this error when I was installing labview 8.2 and when I was installing it said to insert the device driver CD. This error came up and when I subsequently tried to install it by itself I kept getting this error. I also switched CD rom drives and it still gave the error. Could the CD be corrupted??
The error is:
.\UberInstaller.cpp(1255): IInstallerError 10009
Fatal Error. Unable to create temporary file.
Unable to copy original D:\SupportFiles\resourceEng.dll to C:\DOCUME~1\LAPTOP~1\LOCALS~1\Temp\nii49D.tmp.
Windows Error Windows Error 23: Data error (cyclic redundancy check).
Any ideas?? Is it possible to download the set of drivers? I know I can download them individually but it would be helpful to be able to download the 3 CD set.
Thanks
J Bowen
US Marine; A Brunswick Family Boat Company
Product Integrity, Component Testing, and Validation
LabVIEW 8.2
CompactDAQ
DaqPad 6015
SCC-2345

Hello,
This definitely looks like a CD and/or CD drive issue - I've seen similar. If your CD drives were the same, you may try with another, although that's not necessarily helping you on your development machine. Another thing to try is copying the contents of the CD to your hard drive, and installing from there. This has the added benefit if/when you build installers in LabVIEW for your applications that IF you have to include additional installers (this is an option in the installer build spec) THEN they will be referenced from your hard drive INSTEAD of the CDs, which you would otherwise be prompted for... if you happen to have misplaced them, this can be a point of frustration!
I hope this helps!
Best Regards,
JLS
Message Edited by JLS on 09-12-2006 02:15 PM
Best,
JLS
Sixclear

XSLT transformation error when importing target group in CRM Survey cockpit

Hi,
I created a target group using the segment builder and exported that to a local file. Then when creating a survey using CRM survey cockpit (tcode: SURVEY) and trying to import the same target group from the local file; I get an error :
"Error when applying a XSLT transformation"
System Response
Data transformation cannot be executed. Application functions that depend on the transformation cannot be executed
I tried various file formats : RTF, TXT, XLS, HTML but still I get the same error. Export to XML option is neither available while exporting from segment builder nor while importing into Survey cockpit. The target group is not empty.
Are there any settings to be maintained to resolve the error ?????
Dhaval.

Hi Suhel,
Thanks for the response... as far as my understanding goes, the crm survey suite can be used for maintaining questoinnaires that are transaction specific. also the functionality of question tables and rows is not available in the survey suite but is available in the survey cockpit (tcode: SURVEY).
However the same does not allow me to refer to the target groups created using the segment builder.... Is there a way I can use the target group created through the segment builder in the survey cockpit ????
Dhaval.

Satellite M40: Graphic Errors when changing screen resolution

Hi,
I have a Satellite M40 and a big problem.
in windows xp pro sp2:
when a program changes the screen resolution, the screen gets messed up,
I see only stripes and only a restart can get it back working (or suspend to disk).
[edit]
I plugged an external monitor to the laptop and it works,
the laptop screen is full of lines and the 2nd monitor shows what the laptop screen should normally also show
[/edit]
in linux:
this can be also seen when changing from the xwindow mode in linux back to tty(1-6)
Here are some pictures of this strange behavior:
http://www.ronnylindner.de/extern/images/toshiba/screen1.jpg
http://www.ronnylindner.de/extern/images/toshiba/screen2.jpg
http://www.ronnylindner.de/extern/images/toshiba/screen3.jpg
It looks like a hardware problem, but could it be just a wrong bios setting?
What can I do?
Bye and thanks in advance, Ronny
Message was edited by: [email protected]_DE

I will try it with the Toshiba graphics driver, at the moment I use the newest Omega driver
I use 1280x800 as normal resolution
programs giving this error:
world of warcraft (1024x768) -> working with 1280x800
age of empires 2 (800x600)
as I said before, I get this problem also using Suse Linux when I switch from KDE to tty
thanks you too, hope we can get it working together :-)
[edit]
strange, using the Toshiba display driver I got the problem at the first try (aoe2), but now it is not reproducable :-(
[/edit]
Message was edited by: [email protected]_DE

Error when changing the length of IO

Hi Experts,
I have changed the length of one of my Info-Object from NUMC-2 to NUMC-3. While trying to activate it it is giving the error "Structure Change at field Level(change Table)".
But When i changed the length of one more IO before from Char-1 to Char-3, it successfully got activated.
Please help me out.
Regards,
Pavan

Hi Ananda,
We cannot delete the master data.
Can Anyone pleasetell me why this IO is not getting activated when i change length from NUMC2 to NUMC3
I didn't face any problem when i changed the length of one of my IO from Char-1 to Char-3. It successfully got activated
But im facing this problem when I try to change the length of another IO from NUMC-2 to NUMC-3.
If anyone any any solution for this otherthan deleting the existing data, please do let me know.
Regards,
Pavan

Facing an error when change the sysadmin password

hi expert,
when i am going to change the sysadmin password i m facing the below error on linux in production environment. i cant understand why this error occured. i change the sysadmin password many times but never get any error. when going to change the sysadmin password the production instance is open.
[applprod@oracleerp ~]$ FNDCPASS apps/apps 0 Y system/manager USER SYSADMIN sys@adm!n
-bash: !n: event not found
plz suggest how can i resolve the above error.
thanks & regards
pritesh ranjan

Hi Pritesh Ranjan,
plz suggest me one thing can i change sys password directly without down the ebs application same as system user.
exp -
alter user system identified by manager;
for sys
alter user sys identified by oracle123; (in production environment without down the ebs application)
Yes, you can change without restarting the ebs application.
And your syntax seems fine.
Thanks &
Best Regards,

ACS 5.3 - Error when changing Device group or Location

Similar Messages

Maybe you are looking for