ACS 5.3 not processing changes

Hello,
We have Cisco ACS 5.3 and it was set up with all the rules, users, groups etc and it worked really well from the get go. The problem we are having now is that since we've set it up, not much changes need to be made often and when we do try to make a change, ACS seems to not be recognizing the change.
Under : (Access Policies > Access Services > Default Device Admin sdsff> Authorization)
I've created a new rule to allow a new group of users to access a specific device type and ACS is not showing any hits to the counter. I've had a similar error before and restarting the box solved it but I would really not want to think that each time we need to make a change I'll have to restart the box. All the processes are running.
ACS01/admin# show application status acs
ACS role: PRIMARY
Process 'database' running
Process 'management' running
Process 'runtime' running
Process 'view-database' running
Process 'view-jobmanager' running
Process 'view-alertmanager' running
Process 'view-collector' running
Process 'view-logprocessor' running
Is there anyone experiencing a similar error or knows how I can fix it?

Hi Alain,
Do still tryed a ldap browser, to see if you have access with you internal user to your AD ?
Maybe your user is not assign as wel in your AD ?
We had the same problem in our labo, you know
http://www.ldapbrowser.com/
Succes

Similar Messages

Lightroom 5.4, 5.5 and now 5.6 develop module not processing changes made on pictures

Has anyone come across this annoying bug from Lightroom yet? if so how did you solve it, workaround also welcome, it's doing my head in now. Been here for weeks now with all jobs sitting on my desk waiting to be processed but lightroom NOT working as it should
Version 5.4 never had this sort of issue and when upgraded to 5.5 all seemed to work fine up to 3 weeks ago when i though my PC was the culprit, uninstalled - deleted reg keys and clean registry hives from any LR entries yielded NOTHING upgraded to 5.6 same completed the same tasks on two other laptop with Win 7 and Win 8 NOTHING.
I'm on Windows 8.1 any similar photo editing tools will be appreciated, getting fed up with these dudes now.

Thank you for reply Rikk Flohr and sorry if had not been clearer enough.
I have been experiencing for more than a month now, I was hoping the latest V5.6 will nurse for me but instead another disappointment.
Scenario:
- I upload pictures into Lr and click on Develop tab.
- I make some extreme exposure/contrast/etc adjustments (to the left or right) nothing happens on picture in the main window but instead to the one in the timeline section
Troubleshooting do so far:
- Uninstalling and cleaning the registry then reinstalling (on more than one PC)
- Uninstalling V5.6 and installing earlier versions 5.5 then 5.4 no yield.
- Try the suggested link (Resetting (or 'Trashing') the Lightroom Preferences file - Lightroom Forums) advise, same result.
I'm really HOPING you guys can fix this issue as I have jobs piling up in my hard drive to be processed on the daily basis.
Will appreciate if you could advise on all directories to look at when clearing Lr registry entries on both hives of the PC, I'm on Windows 8.1 x64 with all the latest updates

I am trying to change country to US for iTunes on my iPad. After I select US in account setting and press NEXT I get message: "Cannot connect to iTunes" and then "The iTunes Store could not process your request. Please true again later". Help please.

I am trying to change country to US for iTunes on my iPad. After I select US in account setting and press NEXT I get message: "Cannot connect to iTunes" and then "The iTunes Store could not process your request. Please true again later". Help please.

downloaded the updated iTunes and that did nothing. I then went through the form about $ very VERY carefully and discovered one field left blank. Once that was filled in, everything worked and I now have my free app.

Entry was not processed because there is no changing parameter available

Hi,
I'm new to SCM area. Started a development to update the SNP Planner Codes to the Product Master with some code. For this purpose, I'm using the standard bapi - BAPI_PRDSRVAPS_SAVEMULTI2. To use this, according to the documentation of the BAPI, I've passed the Internal Product number (PRODUCT_INT), also, I'm passing Internal Location (LOCATION_INT).
The tables that I'm updating are: PRODUCT_HEAD, PRODUCT_TEXT, PRODUCT_LOCATION.
With the kind of error I saw, I thought of assigning the Model also to the Product. So I've also populated the table : PRODUCT_MODEL with model = '000'.
When I run this BAPI, I get the below mentioned error.
E APO_BAPI 051 Entry was not processed because there is no changing parameter available
There could be another post belonging to the same, but I could not find it so posting this thread.
Regards,
-Syed.

Hi,
For each of these tables that you are trying to update PRODUCT_HEAD, PRODUCT_TEXT, PRODUCT_LOCATION, there will be corresponding X tables like PRODUCTHEAD_X, PRODUCT_TEXT_X, PRODUCT_LOCATION_X.
You will need to populate the particular fields in these X tables with value X so that the particular fields in tables PRODUCTHEAD, PRODUCT_TEXT, PRODUCT_LOCATION are processed.
thanks
Ehsan Ahmed

User Profile Incremental Sync does not views changes in profiles.

User Profile Incremental Sync does not views changes in profiles. I make full sync - all ok. then I change the phone number for example, and then start incremental sync and nothing moves to AD.
All the stages of FIM sync just state 0 records to process. Looks like it does not see the changes
1.profile property is set up to sync with AD attribute (with EXPORT).
2.no errors in Windows logs or FIM UI client, nor in sharepoint UI
3. sharepoint server 2010 SP1, "CU June 2012" 14.0.6123.5002
4. I have just reprovisioned sync service, set up AD connections and property-attribute relations. before
there was this problem http://social.msdn.microsoft.com/Forums/en-US/cb2b8aeb-d1b6-49a6-a788-2491ca45308a/critical-error-6398-userprofileimportjob-problem-profile-sync-malfunction?forum=sharepointadminhttp://social.msdn.microsoft.com/Forums/en-US/cb2b8aeb-d1b6-49a6-a788-2491ca45308a/critical-error-6398-userprofileimportjob-problem-profile-sync-malfunction?forum=sharepointadmin,
which I resolved by clearing timer service cache.
Help with advice, urls or solurions please..

Hi VlH,
According to your description, the issue can be caused by the Profile or Profile Values table.
You can check the event log and ULS log to see detail error message.
To check event log, click the Start button and type “Event Viewer” in the Search box.
For SharePoint 2013, by default, ULS log is at
C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\15\LOGS
For your issue you can refer to the similar thread:
http://social.technet.microsoft.com/Forums/sharepoint/en-US/bc3cd2ff-dc12-4223-a80b-e4cae616e861/user-profile-sync-doesnt-update-the-profiles-from-ad?forum=sharepointadminlegacy
Also a good blog for user profile synchronization:
http://www.harbar.net/articles/sp2010ups.aspx
Best Regards,
Eric
Eric Tao
TechNet Community Support

Job getting cancelled for 'Chain not processed for date-2007031920070318' ?

Hi All,
We have 2 process chains running only on weekdays - one for sales and the other for billing. A cancelled job is created for one of the process chains with the job log message as 'Chain not processed for date-2007031920070318' for the not run days whereas the other does not have any issues though the same monitor job program runs for both. The difference is only in the variant but nothing much other than that its maintained for 2 different chains.
   We also debugged the monitor job program. It basically does nothing other than displaying messages depending on the status of the chain log.
Please let me know your suggestions as to why it happens.
Thanks,
krishna

it is also giving following error message:
Caution: Program has changed
Caution: At time of termination, Active source code no longer available and after above two statements its giving sign "?" before every statement in below manner:
024300 ?     lit_ekpo_dummy1[] = it_ekpo[].
024310 ?     DELETE lit_ekpo_dummy1 WHERE ebeln NE tab1-ebeln.
024320 ?     DESCRIBE TABLE lit_ekpo_dummy1 LINES count01.
024330 ?
024340 ?     REFRESH lit_ematn_dummy[].
024350 ?     lit_ematn_dummy[] = lit_ematn[].

IDoc Error -Instance of object type could not be changed

Hi All
I am getting IDoc failed with the error massaeg "Instance of object type could not be changed"
Message type :PORDCR
Basic type : PORDCR05
Message no. BAPI003
Status : 51
Please suggest on this
Thanks
Ajit

Hi Madhu
All these POs are uploaded during the Cutover Activities only, I am not sure whether it is uploaded through LSMW or not. What I guess is If its uploaded thrugh LSMW , then we can't change any value in the PO.
Please sugest how can I process allthese IDocs.
Thanks
Ajit

Changes in itunes not being changed on my iphone4s

Changes made on the iphone control feature in itunes, say add a song to a playlist or add an artist, are not being changed on the phone. Any ideas? thanks.

Hello there, imasummergirl.
Great job, troubleshooting your issue so far. You may want to try manually updating your iTunes Match using the steps found in this article to see if that helps correct your issue:
How to troubleshoot iTunes Match - Apple Support
Make sure you have the latest version of iTunes. You can download the latest version for free.
Launch iTunes on your computer.
From the iTunes menu, choose Advanced > Get Album Artwork.
Once iTunes has completed processing the album artwork, you'll need to update iTunes Match.
From the iTunes menu, choose Store > Update iTunes Match.
In your instance you can skip steps 3 & 4, as your issue doesn't involve Album Artwork.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

[SOLVED] GRUB2 does not process hooks: System doesn't boot

My initial system was an SSD where /dev/sda1 was my boot partition and /dev/sda2 was an (encrypted) LVM containing home, root, var and swap. Since all partitions were ext3, I decided to do a clean format to ext4 and copy my data back on the partitions. First I archived everything but home with the arch live CD onto a server with:
rsync -a /mnt/* root@server:/path/to/backupdir/
Everything went fine, but after copying back, the system would not boot (it was GRUB Legacy). Since it was not in the MBR but on sda1, I figured I could upgrade to GRUB2 now. So I followed the described procedure (from a live CD) and installed GRUB2 (this time into the MBR of sda. I then regenerated the image via mkinitcpio -p linux and generated a configuration file.
When I try to start the system, GRUB2 gets loaded, but after the two messages for loading the ramdisk it remains silent for some time (no output at all) until it finally complains it cannot find my root. But I did not see any output of any hook being processed (including encrypt) so of course it cannot find my root, since it is still encrypted.
I reformatted my boot partition again and reinstalled and regenerated everything again (I copied the directory contents from my backup but moved the old grub folder). Still the same issue. I know I could probably just reinstall everything and restore the settings, but I'd really prefer to restore my system, since this should be a lot faster.
Here are the relevant configuration files:
rc.conf
# /etc/rc.conf - Main Configuration for Arch Linux
# LOCALIZATION
# LOCALE: available languages can be listed with the 'locale -a' command
# LANG in /etc/locale.conf takes precedence
# DAEMON_LOCALE: If set to 'yes', use $LOCALE as the locale during daemon
# startup and during the boot process. If set to 'no', the C locale is used.
# HARDWARECLOCK: set to "", "UTC" or "localtime", any other value will result
# in the hardware clock being left untouched (useful for virtualization)
# Note: Using "localtime" is discouraged, using "" makes hwclock fall back
# to the value in /var/lib/hwclock/adjfile
# TIMEZONE: timezones are found in /usr/share/zoneinfo
# Note: if unset, the value in /etc/localtime is used unchanged
# KEYMAP: keymaps are found in /usr/share/kbd/keymaps
# CONSOLEFONT: found in /usr/share/kbd/consolefonts (only needed for non-US)
# CONSOLEMAP: found in /usr/share/kbd/consoletrans
# USECOLOR: use ANSI color sequences in startup messages
LOCALE="en_US.UTF-8"
DAEMON_LOCALE="no"
HARDWARECLOCK="UTC"
TIMEZONE="Europe/Berlin"
KEYMAP="de-latin1-nodeadkeys"
#CONSOLEFONT=
#CONSOLEMAP=
USECOLOR="yes"
# HARDWARE
# MODULES: Modules to load at boot-up. Blacklisting is no longer supported.
# Replace every !module by an entry as on the following line in a file in
# /etc/modprobe.d:
# blacklist module
# See "man modprobe.conf" for details.
MODULES=(acpi-cpufreq cpufreq_ondemand tun fuse vboxdrv)
# Udev settle timeout (default to 30)
UDEV_TIMEOUT=30
# Scan for FakeRAID (dmraid) Volumes at startup
USEDMRAID="no"
# Scan for BTRFS volumes at startup
USEBTRFS="no"
# Scan for LVM volume groups at startup, required if you use LVM
USELVM="yes"
# NETWORKING
# HOSTNAME: Hostname of machine. Should also be put in /etc/hosts
HOSTNAME="archlaptop"
# Use 'ip addr' or 'ls /sys/class/net/' to see all available interfaces.
# Wired network setup
# - interface: name of device (required)
# - address: IP address (leave blank for DHCP)
# - netmask: subnet mask (ignored for DHCP) (optional, defaults to 255.255.255.0)
# - broadcast: broadcast address (ignored for DHCP) (optional)
# - gateway: default route (ignored for DHCP)
# Static IP example
# interface=eth0
# address=192.168.0.2
# netmask=255.255.255.0
# broadcast=192.168.0.255
# gateway=192.168.0.1
# DHCP example
# interface=eth0
# address=
# netmask=
# gateway=
interface=wlan0
address=
netmask=
broadcast=
gateway=
# Setting this to "yes" will skip network shutdown.
# This is required if your root device is on NFS.
NETWORK_PERSIST="no"
# Enable these netcfg profiles at boot-up. These are useful if you happen to
# need more advanced network features than the simple network service
# supports, such as multiple network configurations (ie, laptop users)
# - set to 'menu' to present a menu during boot-up (dialog package required)
# - prefix an entry with a ! to disable it
# Network profiles are found in /etc/network.d
# This requires the netcfg package
NETWORKS=(FlosAP)
# DAEMONS
# Daemons to start at boot-up (in this order)
# - prefix a daemon with a ! to disable it
# - prefix a daemon with a @ to start it up in the background
# If you are sure nothing else touches your hardware clock (such as ntpd or
# a dual-boot), you might want to enable 'hwclock'. Note that this will only
# make a difference if the hwclock program has been calibrated correctly.
# If you use a network filesystem you should enable 'netfs'.
DAEMONS=(syslog-ng dbus acpid crond alsa networkmanager @bumblebeed laptop-mode !hwclock ntpd psd)
mkinitcpio.conf
# vim:set ft=sh
# MODULES
# The following modules are loaded before any boot hooks are
# run. Advanced users may wish to specify all system modules
# in this array. For instance:
# MODULES="piix ide_disk reiserfs"
MODULES=""
# BINARIES
# This setting includes any additional binaries a given user may
# wish into the CPIO image. This is run first, so it may be used to
# override the actual binaries used in a given hook.
# (Existing files are NOT overwritten if already added)
# BINARIES are dependency parsed, so you may safely ignore libraries
BINARIES=""
# FILES
# This setting is similar to BINARIES above, however, files are added
# as-is and are not parsed in any way. This is useful for config files.
# Some users may wish to include modprobe.conf for custom module options
# like so:
# FILES="/etc/modprobe.d/modprobe.conf"
FILES=""
# HOOKS
# This is the most important setting in this file. The HOOKS control the
# modules and scripts added to the image, and what happens at boot time.
# Order is important, and it is recommended that you do not change the
# order in which HOOKS are added. Run 'mkinitcpio -H <hook name>' for
# help on a given hook.
# 'base' is _required_ unless you know precisely what you are doing.
# 'udev' is _required_ in order to automatically load modules
# 'filesystems' is _required_ unless you specify your fs modules in MODULES
# Examples:
## This setup specifies all modules in the MODULES setting above.
## No raid, lvm2, or encrypted root is needed.
# HOOKS="base"
## This setup will autodetect all modules for your system and should
## work as a sane default
# HOOKS="base udev autodetect pata scsi sata filesystems"
## This is identical to the above, except the old ide subsystem is
## used for IDE devices instead of the new pata subsystem.
# HOOKS="base udev autodetect ide scsi sata filesystems"
## This setup will generate a 'full' image which supports most systems.
## No autodetection is done.
# HOOKS="base udev pata scsi sata usb filesystems"
## This setup assembles a pata mdadm array with an encrypted root FS.
## Note: See 'mkinitcpio -H mdadm' for more information on raid devices.
# HOOKS="base udev pata mdadm encrypt filesystems"
## This setup loads an lvm2 volume group on a usb device.
# HOOKS="base udev usb lvm2 filesystems"
HOOKS="base udev autodetect pata scsi sata keymap encrypt lvm2 resume filesystems usbinput"
# COMPRESSION
# Use this to compress the initramfs image. With kernels earlier than
# 2.6.30, only gzip is supported, which is also the default. Newer kernels
# support gzip, bzip2 and lzma. Kernels 2.6.38 and later support xz
# compression.
#COMPRESSION="gzip"
#COMPRESSION="bzip2"
#COMPRESSION="lzma"
#COMPRESSION="xz"
#COMPRESSION="lzop"
# COMPRESSION_OPTIONS
# Additional options for the compressor
#COMPRESSION_OPTIONS=""
grub.cfg
# DO NOT EDIT THIS FILE
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
### BEGIN /etc/grub.d/00_header ###
insmod part_gpt
insmod part_msdos
if [ -s $prefix/grubenv ]; then
load_env
fi
set default="0"
if [ x"${feature_menuentry_id}" = xy ]; then
menuentry_id_option="--id"
else
menuentry_id_option=""
fi
export menuentry_id_option
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
function load_video {
if [ x$feature_all_video_module = xy ]; then
insmod all_video
else
insmod efi_gop
insmod efi_uga
insmod ieee1275_fb
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
fi
if loadfont unicode ; then
set gfxmode=auto
load_video
insmod gfxterm
set locale_dir=$prefix/locale
set lang=en_US
insmod gettext
fi
terminal_input console
terminal_output gfxterm
set timeout=5
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/10_linux ###
menuentry 'Arch GNU/Linux, with Linux core repo kernel' --class arch --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-core repo kernel-true-194e65d3-b357-430d-b4bb-67a8300d287d' {
load_video
set gfxpayload=keep
insmod gzio
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 b69dee88-a8c9-4af7-a938-7ca6c8ff368c
else
search --no-floppy --fs-uuid --set=root b69dee88-a8c9-4af7-a938-7ca6c8ff368c
fi
echo 'Loading Linux core repo kernel ...'
linux /vmlinuz-linux root=/dev/mapper/VolGroup00-root ro quiet
echo 'Loading initial ramdisk ...'
initrd /initramfs-linux.img
menuentry 'Arch GNU/Linux, with Linux core repo kernel (Fallback initramfs)' --class arch --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-core repo kernel-fallback-194e65d3-b357-430d-b4bb-67a8300d287d' {
load_video
set gfxpayload=keep
insmod gzio
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 b69dee88-a8c9-4af7-a938-7ca6c8ff368c
else
search --no-floppy --fs-uuid --set=root b69dee88-a8c9-4af7-a938-7ca6c8ff368c
fi
echo 'Loading Linux core repo kernel ...'
linux /vmlinuz-linux root=/dev/mapper/VolGroup00-root ro quiet
echo 'Loading initial ramdisk ...'
initrd /initramfs-linux-fallback.img
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/20_memtest86+ ###
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f ${config_directory}/custom.cfg ]; then
source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
Thank you in advance. If you need any more information, please let me know.
Regards,
javex
Last edited by javex (2012-08-10 18:33:41)

Thank you for your reply. I looked further into the grub.cfg and removed the quiet part. Apparently the problem is that it runs all hooks but does not prompt me for a passphrase when running the encrypt hook. Why does this occur?
Edit: I solved this: apparently I forgot to specify a cryptdevice. Since the article about dm-crypt does not talk about GRUB2, I missed that. I will rework that section to specify GRUB2 and GRUB-Legacy
Last edited by javex (2012-08-10 18:33:22)

Inspection Lot status not getting changed to LTCA from REL for SubCon scenario

Dear All,
For ERSA material 01 inspection type is active with indicator Post to inspection stock only as it can be purchased. No other indicator is set.
This material can be sent for repairing outside with DAMAGE valuation type (stock provided to Vendor with DAMAGE valuation type).
For SubCon scenario, Purchase Order with Account Assignment Category F and Item Category L has been created.
Once GR using MB01 with 101 movement, consumption posting takes place and as Insp type 01 is active Inspection lot is getting created with status REL CALC.
At this time, DAMAGE stock against Vendor is getting reduced with Qty of 543 movement.
Now when, reversal 102 with MB01 is done against Purchase Order and details are adopted with reference to 101 material document, reversal is taking place, but at the same time respective material doc's Inspection lot status is not getting changed to LTCA. It remains REL only.
For 122 return to Vendor using MBRL also, Insp lot status is not getting changed.
Has anybody faced such issue? Is this standard SAP?
Kindly throw light on the process, is correct process followed?
Regards,
Tanuj Parikh

Thanks.
Thru MBST Inspection Lot status changed to LTCA.
Why system is not cancelling thru MB01?

Email/print in status "Not processed" when RFQ is published

Hello,
We are running SRM 5.0.
We have set up the event schema for BUS2200 (RFQ) to react on events: PUBLISHED, PUBLISHED_AGAIN etc. And assigned the event schema to RFQ's transaction types, eg BID.
However, when an RFQ is published, the email is not sent to vendor (whose default medium is MAI) or printed on vendor's default printer (if the medium is set to PRN). The output log under bidder/bids tab shows something like :
Status: Not processed
Medium: Print
When I clicked on the action button "Output pushbutton", the status would be changed to "Successful" and the email would be sent or the print job would be printed then.
I have checked the PPTTRIGG table and all the entries in there are of DISPATCH = 1 or 4. Not 3, which seems to indicate an "immediate processing".
My question is how I would configure the system so that the email/print when the RFQ is published could be processed immediately.
Thanks.

Hello Masa,
I realized it as well. I was then a little puzzled why SRM didn't allow "immediate processing" for the "processing time" parameter in the action definition. Do you know if there is a particular reason for that?
Thanks,

System setting does not allow changes to be made to object LSYS

Hi
Im trying to create the process chain in BW-Production System . Like im trying to delete the PSA data for one datasource in BI7.0 .
Im using the 'Delete requests from the PSA' process type in the process chain . When i try to give the datasource name and source system name in the variant of 'Delete requests from the PSA' process type and save them , then it is saying that
System setting does not allow changes to be made to object LSYS
Why it is saying like that . But i can able to include the other process types in the process chain .
regards
mohammed

Dear Mohammed,
Since you are trying to create process chain in production system.
Normally production system wont be open for development at any time. Why the system settings does not allow changes was, your production is not modifiable state.
Check the settings in SE06. system would be non-modifiable for sure.
in SCC4, settings ->"changes to the cross customizing objects would be not allowed"
These two settings/configurations would not allow any development or changes or edit or create in production.
Please check with your basis folks and proceed further.
Hope this would help you more in understanding

Could not process file 'Input 110110b.txt': com.sap.aii.adapter.file.

I have a FILE Adapter using FTP as a transport that is generating a very odd error.
The FTP sender channel is giving the following error is set up to retreive all files (*) from a specific directory. If you look at the error, it indicates an error processing the file 'Input 110110b.txt' as a file -- the only way this filename woudl be visible is if the adapater interrogated the directory, or the filename was hard-coded in the file mask. But the error indicates it can't change to the directory. The only way it would have come up with the file is if it had already CD'd t that directory.
1/7/11 8:12:01 AM   Retry interval started. Length: 60.0 seconds
1/7/11 8:12:01 AM   Could not process file 'Input 110110b.txt': com.sap.aii.adapter.file.ftp.FTPEx: 550 Failed to change directory.
1/7/11 8:12:00 AM   Processing started
My first thought was a simple permission issue, so I opened a connection to server with FileZilla (an FTP client) and was able to retrieve the file without a problem. I was also able to drop a file in the directory. There is no permissions problem.

Hi
Please check the below points before processing any file
a) check the File placing by a Local Plant FTP owner is using the same authentification credentials It means both PI and source team needs to use same FTP User ID and login credentials otherwise if suppose if source team is placing with one User and PI cannot able to pick that file as this User cannot have permissions in this case also u will get 550 error
b) I know what ur telling is u manualy palced one file and able retrive...but do one thing u can login with same PI FTP login server credentials and then place the file with different name also I suggest lets test the channel by simply keeping
. not simply * if you keep simply * then u cna use in receiver chanel while using dynamic connfiguration.
Else give *.txt and then activate the channel and also please check the CACHE as well
Regards
Amar Srinivas Eli

Import Server detects file in Ready folder but does not process

I have a problem where MDIS detects a file in the ready folder, but it does not launch the import:
2772 2008/10/22 23:37:52.240   1.xml
Source file retrieval: Delta: 0.001451 seconds.
2772 2008/10/22 23:38:23.428   1.xml
Source file retrieval: Delta: 0.001151 seconds.
2772 2008/10/22 23:38:54.678   1.xml
Source file retrieval: Delta: 0.006335 seconds.
2772 2008/10/22 23:39:25.897   1.xml
Source file retrieval: Delta: 0.011595 seconds.
2772 2008/10/22 23:39:57.272   1.xml
Source file retrieval: Delta: 0.003268 seconds.
2772 2008/10/22 23:40:28.507   1.xml
Source file retrieval: Delta: 0.006276 seconds.
The log file shows the above. You can see it detects the file is there, but since it does not launch the import it does not process the file or even move it to the exception or archive folders. I have confirmed settings in the MDIS.ini file, e.g. password, etc. I can import the same file using Import Manager without any errors.
Please help!

Hi Jitesh,
Your suggestion to try a different file type yielded positive reults. I created a simple tab delimited text file and import map and changed the existing Port from using XML based on the MATMAS05 schema to using the text file. The log shows:
6056 2008/10/23 17:32:34.066   [MDS=ROBLB2K1H2J Repos=JAN Master ClientSystem=U2K2_MDM Port=Materials_from_U2K2_MDM]: ImportTask: Task started. Chunk size[50000], No. parallel chunks[5]
4572 2008/10/23 17:32:34.144   [MDS=ROBLB2K1H2J Repos=JAN Master ClientSystem=U2K2_MDM Port=Materials_from_U2K2_MDM]: xStructuralTransformer: Thread started.
1160 2008/10/23 17:32:34.144   [MDS=ROBLB2K1H2J Repos=JAN Master ClientSystem=U2K2_MDM Port=Materials_from_U2K2_MDM]: xValueTransformer: Thread started.
4192 2008/10/23 17:32:34.144   [MDS=ROBLB2K1H2J Repos=JAN Master ClientSystem=U2K2_MDM Port=Materials_from_U2K2_MDM]: xImporter: Thread started.
4572 2008/10/23 17:32:34.144   [MDS=ROBLB2K1H2J Repos=JAN Master ClientSystem=U2K2_MDM Port=Materials_from_U2K2_MDM]: xStructuralTransformer: Thread finished; Start -> End: 0.000000000 seconds.
1160 2008/10/23 17:32:34.160   [MDS=ROBLB2K1H2J Repos=JAN Master ClientSystem=U2K2_MDM Port=Materials_from_U2K2_MDM]: xValueTransformer: Thread finished; Start -> End: 0.000000000 seconds.
4192 2008/10/23 17:32:34.660   Repository Load Successful. [JAN Master]: Delta: 0.085377 seconds.
4192 2008/10/23 17:32:35.958   [MDS=ROBLB2K1H2J Repos=JAN Master ClientSystem=U2K2_MDM Port=Materials_from_U2K2_MDM]: xImporter: Thread finished; Start -> End: 1.000000000 seconds.
6056 2008/10/23 17:32:36.458   [MDS=ROBLB2K1H2J Repos=JAN Master ClientSystem=U2K2_MDM Port=Materials_from_U2K2_MDM]: ImportTask: Task finished. Chunk size[50000], No. parallel chunks[5]
4192 2008/10/23 17:34:11.133   22355-3-1-10-23-08-06-32-57_081023-063303_999.xml
Source file retrieval: Delta: 0.006444 seconds.
4192 2008/10/23 17:34:11.242   Repository Load Successful. [JAN Master]: Delta: 0.028803 seconds.
4572 2008/10/23 17:34:43.825   22355-3-1-10-23-08-06-32-57_081023-063303_999.xml
Source file retrieval: Delta: 0.003005 seconds.
4572 2008/10/23 17:35:16.018   22355-3-1-10-23-08-06-32-57_081023-063303_999.xml
Source file retrieval: Delta: 0.010113 seconds.
4572 2008/10/23 17:35:47.742   22355-3-1-10-23-08-06-32-57_081023-063303_999.xml
Source file retrieval: Delta: 0.001994 seconds.
4572 2008/10/23 17:36:19.419   22355-3-1-10-23-08-06-32-57_081023-063303_999.xml
Source file retrieval: Delta: 0.012413 seconds.
The text file was immediately picked up and imported. This thus proves that (1) MDIS is functioning, (2) user / password is correct. Unfortunately you will also see from the log above that when I changed the port back to run on XML the problem has not been resolved.
Any ideas?

Why does Aperture 3,not process RAW files from Leica D-Lux 5 ?

Hello:
The purchase of my Leica D-Lux 5 came with LR 3. All raw files can be processed in that Application.However.I also have Aperture 3 and it will not process RAW files from the D-Lux 5.I hope that Apple soon will address this inconvenience.Has anyone els had the same problem?
Hoping for a solution;Thanks John Basso. Mac OS X 10.6.7

I can tell you that it does process them from Panasonic LX5's - I have one. The files are probably very similar with slightly different processing metadata and a different tag. It is possible to change the tag in the RAW file prior to import that "fools" aperture into thinking that the RAW is the same as a camera that is supported. I have done this with other cameras where the RAW files were really the same but the camera was not yet "officially supported" at the time I bought it.
I kinda remember doing it to the EP-2 or was it the EPL-1? Don't remember but there are plenty of tools that will allow this - google is your friend.
Just make sure that your install of Ap3/OS X DOES actually have support for the LX5... Might work but I have not tried it.
RB

ACS 5.3 not processing changes

Similar Messages

Maybe you are looking for