ACS 5.3 Occurred At: Tue Sep 10 04:00:00 IST 2013 Cause: Purge Configuration Repository not configured
hi team,
I am runing ACS 5.3 version and i am getting error messages like below
System Alarm [Database Purging]
Mon Sep 09 04:00:00
Incremental Backup Not Configured
System Alarm [Database Purging]
Sun Sep 08 04:00:00
Purge Configuration Repository not configured
Cause:
Purge Configuration Repository not configured
Details:
Configure Remote Repository under Purge Configuration which is used to take a backup of data before purge.
Cause:
Incremental Backup Not Configured
Details:
Incremental backup is not configured. Configuring incremental backup is necessary to make the database purge successful. This will help to avoid disk space issues. View database Size is 1.27GB and size it occupies on the harddisk is 1.22GB.
Could any one provide solution to overcome this issue.
Hi,
I guess I've seen this before even we've repository and incremental backup configured fine on ACS. One reason could be for the above alarms is the configuration on the GUI might not have taken over completely in the database and alarms will trigger due to that. Please restart the services of the ACS or reload the ACS in off production hours.
acs stop
acs start
OR
reload
~BR
Jatin Katyal
**Do rate helpful posts**
Similar Messages
-
ACS Incremental backup not configured
Hi All,
I have upgraded to ACS 5.5 patch 6, but having strange issues.
Though the incremental backup is configured, it is sending an alert as "Incremental backup is not configured. Configuring incremental backup is necessary to make the database purge successful. This will help to avoid disk space issues. View database Size is 13.68GB and size it occupies on the harddisk is 13.65GB."
I checked under the purge and incremental history, it has done the incremental backup.
I received another alert "Configure Remote Repository under Purge Configuration which is used to take a backup of data before purge" and check it is accessible from CLI #show repository xxxxx.
Has anyone gotten these issues before??
I have configured all these on Primary.
ThanksWarning Alarm to wait 90 min between incremental backup and Purge time
CSCtx20928
Description
From the ACS 5.x user guides , it is documented that If you enable incremental backup, data is purged daily at 4:00 a.m. at the local time zone where the ACS instance that runs the View process is located.
However, you cannot concurrently run an incremental backup, full backup, and data purge. If any of these jobs are running, you must wait for a period of 90 minutes before you can begin the next job.
If the Incremental Backup schedule is configured within the 90 minutes of Data Purge time, there is no warning thrown on the GUI against this config.In this case, we get Warning Alarms which don't indicate the right status to have wait period of 90 minutes before you can begin the next job.
The Warning Alarms which are shown are incorrect like:
Incremental Backup Not Configured: Incremental backup is not configured. Configuring incremental backup is necessary to make the database purge successful. This will help to avoid disk space issues. View database Size is 0.23GB and size it occupies on the harddisk is 0.23GB.
Purge Configuration Repository not configured: Configure Remote Repository under Purge Configuration which is used to take a backup of data before purge.
Workaround:
As data is purged daily at 4:00 a.m. at the local time zone where the ACS instance that runs the View process is located,configure Incremental Backup schedule at 90 min time gap between Data Purge time. -
I have two cFP-2120 RT controller. They both have NI-Serial RT2.5.6, DataSocket for LV RT4.2, NI-VISA 3.6, FP Drivers 5.1.0, FP VI Manager 3.1.0 LV RT 7.1.1 installed. But one same vi can run on one controller but not another.
the error message got when it runs on another controller is "Error -32810 occurred at The FieldPoint server initialization failed. Possible causes: 1. Missing or corrupt configuration file; 2. Failed to create callbacks. : FP Open.vi"
I wonder by what it is caused?
ThanksHi Matthew,
As mentioned previously, this KnowledgeBase article may be of some help. Also, if your code is being run on an embedded controller and then a network controller (not embedded), you will need to run the program differently. On the embedded controller, you should deploy your VI in a Project Explorer or programmatically (as described here.) However, you do not need to deploy the program to a network controller, but simply run the VI.
I would also suggest creating a new .IAK file. Do you still see the same error? Also, double-check that the software installed on the controller matches the software installed on the host PC. If you have any file paths associated with one FieldPoint controller, ensure that you are changing them to match the second controller.
Please keep us posted on your troubleshooting steps. Have a great day!
Amanda Howard
Americas Services and Support Recruiting Manager
National Instruments -
Hi All,
We are using FTP Connection in our SSIS Package which will take a flat file from the sharepath to another FTP Path.
We used SqlServerTableConfiguration to store all the connection. Initally we have stored only the below connection int he
SqlConfiguration table. ie only the server name
Note : We are not using XML Configuration.
ConfigurationFilter
ConfiguredValue
PackagePath
Filter_ftp
pqrft- pcmnt.uk.acenentcapmc.com:21
\Package.Connections[FTP Connection Manager].Properties[ConnectionString]
while running the job we have found that we have not stored the UserName and password so we have added the below entries in the Sql Configuration table
In the Configurationtable we have the following entires
ConfigurationFilter
ConfiguredValue
PackagePath
Filter_ftp
pgrotmlceni
\Package.Connections[FTP Connection Manager].Properties[ServerUserName]
Filter_ftp
21
\Package.Connections[FTP Connection Manager].Properties[ServerPort]
Filter_ftp
abcdXYZ
\Package.Connections[FTP Connection Manager].Properties[ServerPassword]
Filter_ftp
pqrft-pcmnt.uk.acenentcapmc.com
\Package.Connections[FTP Connection Manager].Properties[ServerName]
Filter_ftp
pqrft-pcmnt.uk.acenentcapmc.com:21
\Package.Connections[FTP Connection Manager].Properties[ConnectionString]
In the package properties we have selected "DontSaveSentivity" Option.
We are getting the below error message when we run the package through jobs after deployment and also we are getting the same error message even when we run the package from Bids
Message
Executed as user:abc_xyz-proxy. Microsoft (R) SQL Server Execute Package Utility Version 10.50.4000.0 for 32-bit Copyright (C) Microsoft Corporation 2010. All rights reserved. Started: 06:53:16 Error: 2013-12-16 06:53:20.69
Code: 0xC001602A Source: SSIS_ABC_GT_GRoots_Export Connection manager "FTP Connection Manager" Description: An error occurred in the requested FTP operation. Detailed error description: The password
was not allowed . End Error Error: 2013-12-16 06:53:20.71 Code: 0xC002918F Source: FTP Task FTP Task Description: Unable to connect to FTP server using "FTP Connection
Manager". End Error DTExec: The package execution returned DTSER_FAILURE (1). Started: 06:53:16 Finished: 06:53:20 Elapsed: 3.822 seconds. The package execution failed. The step failed.
ilikemicrosoftHi Surendiran,
The issue should occur because the syntax of the ConnetionString property of the FTP Connection Manager is incorrect. In fact, the ConnectionString property is unnecessary. I suggest that you only use the four properties instead: ServerName, ServerPort,
ServerUserName, and ServerPassword.
Reference:
http://stackoverflow.com/questions/3888170/ftp-connection-string-using-expression-in-ssis
Regards,
Mike Yin
If you have any feedback on our support, please click here
Mike Yin
TechNet Community Support -
After i updated my iphone 4s from 8.1.2 to 8.1.3 problem occurred.i cant restore and update my phone?saying that iphone could not be restored,an unknown error ocuurred.please help me?
Thanks for the update and clarification. In researching the issue it seems that the 2003 error code may have something to do with the USB connection. I would use this section of one of the above articles:
Get help with iOS update and restore errors
If the USB connection between your device and computer is interrupted, you might not be able to update or restore.
To narrow down the issue, you can try different equipment:
Use the USB cable that came with your device, or a different Apple USB cable.
Plug your cable into a different USB port directly on your computer. Don't plug it into your keyboard.
Try a different computer.
Solve other issues with the USB connection, then with your security software.
If you still see the error message, check for hardware issues by following the next section.
Check for hardware issues
Related errors: 1, 3, 11, 12, 13, 14, 16, 20, 21, 23, 26, 27, 28, 29, 34, 35, 36, 37, 40, 1002, 1004, 1011, 1012, 1014, 1667, or 1669.
These errors mean that your device or computer might have a hardware issue that stops the update or restore from completing.
Check that your security software and settings aren't blocking your device from communicating with the Apple update server.
Then try to restore your iOS device two more times while connected with a cable, computer, and network you know are good.
Make sure that your security software and settings are allowing communication between your device and update servers.
If you still see the error message when you update or restore, contact Apple support. -
Dears , Kindly advise
I have a server running Ciscoworks LMS 4.2.3 version. Server has been working without any issues.
Now when I try to go into Netconfig Jobs, I get the following popup:
CFG0008: Error occured while processing.
Possible Cause: URN_NOT_FOUND : urn "JRM" : Not found !!
I've been looking at various threads similar to my situation and tried several, to no avail.It may be that the related services are down. Share the output of NMSROOT/bin/pdshow -brief from the server to share service status.
Many times, it happens when the port required by service is being used by other. Try the following procedure and see it works :
1.Stop daemon manager: net stop crmdmgtd
2.Go the location: CSCOpx\MDC\tomcat\webapps\rme\WEB-INF\lib take a copy of the following
file and them delete them: ctmregistery and ctmregistery.backup
3.Restart the daemon manager: net start crmdmgtd (wait for 10 minutes)
Check if everything works fine.
-Thanks
Vinod -
Two days ago I noticed a noise my MBP started to make all by itself, it started basically right after I changed the sync contacts option in iTunes for my iPhone to sync my contacts along with my gmail contacts. I've changed it back since then but it continues to make the noise and log file error entries are still posting. Below is my error log file for this issue from the first instance to the last one. Can someone please tell me how to fix this?
5/6/12 5:36:55.323 PM applepushserviced: <APSCourier: 0x7f8a6150fad0>: Stream error occurred for <APSTCPStream: 0x7f8a61504a40>: The operation couldn’t be completed. Socket is not connected
5/6/12 5:36:55.338 PM applepushserviced: <APSCourier: 0x7f8a6150fad0>: Stream error occurred for <APSTCPStream: 0x7f8a61504a40>: The operation couldn’t be completed. (kCFErrorDomainCFNetwork error 2.)
5/6/12 5:36:55.343 PM applepushserviced: <APSCourier: 0x7f8a6150fad0>: Stream error occurred for <APSTCPStream: 0x7f8a6152b960>: The operation couldn’t be completed. (kCFErrorDomainCFNetwork error 2.)
5/6/12 6:19:08.556 PM applepushserviced: <APSCourier: 0x7f8a6150fad0>: Stream error occurred for <APSTCPStream: 0x7f8a6152ab60>: The operation couldn’t be completed. (kCFErrorDomainCFNetwork error 2.)
5/6/12 6:31:36.063 PM applepushserviced: <APSCourier: 0x7f8a6150fad0>: Stream error occurred for <APSTCPStream: 0x7f8a6152b960>: The operation couldn’t be completed. Socket is not connected
5/6/12 6:31:36.077 PM applepushserviced: <APSCourier: 0x7f8a6150fad0>: Stream error occurred for <APSTCPStream: 0x10ab5a350>: The operation couldn’t be completed. (kCFErrorDomainCFNetwork error 2.)
5/6/12 6:31:36.085 PM applepushserviced: <APSCourier: 0x7f8a6150fad0>: Stream error occurred for <APSTCPStream: 0x10ab5a350>: The operation couldn’t be completed. (kCFErrorDomainCFNetwork error 2.)
5/6/12 6:37:38.014 PM applepushserviced: <APSCourier: 0x7f8a6150fad0>: Stream error occurred for <APSTCPStream: 0x7f8a615291a0>: The operation couldn’t be completed. (kCFErrorDomainCFNetwork error 2.)
5/6/12 6:37:40.525 PM applepushserviced: <APSCourier: 0x7f8a6150fad0>: Stream error occurred for <APSTCPStream: 0x7f8a6152cd20>: The operation couldn’t be completed. (kCFErrorDomainCFNetwork error 2.)
5/6/12 9:16:16.042 PM applepushserviced: <APSCourier: 0x7f8a6150fad0>: Stream error occurred for <APSTCPStream: 0x7f8a61501990>: The operation couldn’t be completed. Socket is not connected
5/6/12 9:16:16.065 PM applepushserviced: <APSCourier: 0x7f8a6150fad0>: Stream error occurred for <APSTCPStream: 0x10ab4bf30>: The operation couldn’t be completed. (kCFErrorDomainCFNetwork error 2.)
5/6/12 9:16:16.070 PM applepushserviced: <APSCourier: 0x7f8a6150fad0>: Stream error occurred for <APSTCPStream: 0x7f8a615291a0>: The operation couldn’t be completed. (kCFErrorDomainCFNetwork error 2.)
5/6/12 9:16:17.575 PM applepushserviced: <APSCourier: 0x7f8a6150fad0>: Stream error occurred for <APSTCPStream: 0x10ab5a350>: The operation couldn’t be completed. (kCFErrorDomainCFNetwork error 2.)
5/6/12 9:16:18.597 PM applepushserviced: <APSCourier: 0x7f8a6150fad0>: Stream error occurred for <APSTCPStream: 0x10ab58270>: The operation couldn’t be completed. (kCFErrorDomainCFNetwork error 2.)
5/7/12 5:44:10.355 AM applepushserviced: Unable to bootstrap_lookup connection port for 'com.apple.iCalPush': unknown error code
5/7/12 7:59:36.004 AM applepushserviced: <APSCourier: 0x7f8a615343a0>: Stream error occurred for <APSTCPStream: 0x7f8a6150fc30>: The operation couldn’t be completed. Socket is not connected
5/7/12 7:59:36.065 AM applepushserviced: <APSCourier: 0x7f8a615343a0>: Stream error occurred for <APSTCPStream: 0x7f8a6150fc30>: The operation couldn’t be completed. (kCFErrorDomainCFNetwork error 2.)
5/7/12 7:59:36.096 AM applepushserviced: <APSCourier: 0x7f8a615343a0>: Stream error occurred for <APSTCPStream: 0x10ab5d240>: The operation couldn’t be completed. (kCFErrorDomainCFNetwork error 2.)
5/7/12 7:59:36.520 AM applepushserviced: <APSCourier: 0x7f8a615343a0>: Stream error occurred for <APSTCPStream: 0x7f8a61501990>: The operation couldn’t be completed. (kCFErrorDomainCFNetwork error 2.)
5/7/12 7:59:39.044 AM applepushserviced: <APSCourier: 0x7f8a615343a0>: Stream error occurred for <APSTCPStream: 0x7f8a61501990>: The operation couldn’t be completed. (kCFErrorDomainCFNetwork error 2.)
5/7/12 7:59:41.177 AM applepushserviced: <APSCourier: 0x7f8a615343a0>: Stream error occurred for <APSTCPStream: 0x10ab7f8d0>: The operation couldn’t be completed. (kCFErrorDomainCFNetwork error 2.)
5/7/12 7:59:43.695 AM applepushserviced: <APSCourier: 0x7f8a615343a0>: Stream error occurred for <APSTCPStream: 0x10ab7f8d0>: The operation couldn’t be completed. (kCFErrorDomainCFNetwork error 2.)
5/7/12 8:51:48.271 AM applepushserviced: <APSCourier: 0x7f8a615343a0>: Stream error occurred for <APSTCPStream: 0x10ab67f60>: The operation couldn’t be completed. (kCFErrorDomainCFNetwork error 2.)
5/7/12 8:51:48.272 AM applepushserviced: <APSCourier: 0x7f8a615343a0>: Stream error occurred for <APSTCPStream: 0x7f8a6150fc30>: The operation couldn’t be completed. (kCFErrorDomainCFNetwork error 2.)
5/7/12 9:16:30.061 AM applepushserviced: <APSCourier: 0x7f8a615343a0>: Stream error occurred for <APSTCPStream: 0x10ab4bf30>: The operation couldn’t be completed. (kCFErrorDomainCFNetwork error 2.)
5/7/12 9:17:37.165 AM applepushserviced: <APSCourier: 0x7f8a615343a0>: Stream error occurred for <APSTCPStream: 0x7f8a6152b960>: The operation couldn’t be completed. Socket is not connected
5/7/12 9:17:37.172 AM applepushserviced: <APSCourier: 0x7f8a615343a0>: Stream error occurred for <APSTCPStream: 0x10ab6c0b0>: The operation couldn’t be completed. (kCFErrorDomainCFNetwork error 2.)
5/7/12 9:17:37.188 AM applepushserviced: <APSCourier: 0x7f8a615343a0>: Stream error occurred for <APSTCPStream: 0x7f8a6150fc30>: The operation couldn’t be completed. (kCFErrorDomainCFNetwork error 2.)
5/7/12 10:20:19.760 AM applepushserviced: <APSCourier: 0x7f8a615343a0>: Stream error occurred for <APSTCPStream: 0x7f8a6152b960>: The operation couldn’t be completed. Socket is not connected
5/7/12 10:20:19.766 AM applepushserviced: <APSCourier: 0x7f8a615343a0>: Stream error occurred for <APSTCPStream: 0x10ab87a00>: The operation couldn’t be completed. (kCFErrorDomainCFNetwork error 2.)
5/7/12 10:20:19.775 AM applepushserviced: <APSCourier: 0x7f8a615343a0>: Stream error occurred for <APSTCPStream: 0x10ab87a00>: The operation couldn’t be completed. (kCFErrorDomainCFNetwork error 2.)
5/7/12 10:20:19.781 AM applepushserviced: <APSCourier: 0x7f8a615343a0>: Stream error occurred for <APSTCPStream: 0x7f8a615291a0>: The operation couldn’t be completed. (kCFErrorDomainCFNetwork error 2.)
5/7/12 10:21:47.436 AM applepushserviced: <APSCourier: 0x7f8a615343a0>: Stream error occurred for <APSTCPStream: 0x7f8a6150fc30>: The operation couldn’t be completed. (kCFErrorDomainCFNetwork error 2.)
5/7/12 10:21:47.671 AM applepushserviced: <APSCourier: 0x7f8a615343a0>: Stream error occurred for <APSTCPStream: 0x7f8a6150fc30>: The operation couldn’t be completed. (kCFErrorDomainCFNetwork error 2.)
5/7/12 1:45:59.140 PM applepushserviced: <APSCourier: 0x7f8a615343a0>: Stream error occurred for <APSTCPStream: 0x10ab6e570>: The operation couldn’t be completed. Socket is not connected
5/7/12 1:45:59.155 PM applepushserviced: <APSCourier: 0x7f8a615343a0>: Stream error occurred for <APSTCPStream: 0x7f8a6152b960>: The operation couldn’t be completed. (kCFErrorDomainCFNetwork error 2.)
5/7/12 1:45:59.243 PM applepushserviced: <APSCourier: 0x7f8a615343a0>: Stream error occurred for <APSTCPStream: 0x10ab73150>: The operation couldn’t be completed. (kCFErrorDomainCFNetwork error 2.)
5/7/12 1:46:00.308 PM applepushserviced: <APSCourier: 0x7f8a615343a0>: Stream error occurred for <APSTCPStream: 0x10ab87a00>: The operation couldn’t be completed. (kCFErrorDomainCFNetwork error 2.)
5/7/12 2:09:38.352 PM applepushserviced: <APSCourier: 0x7f8a615343a0>: Stream error occurred for <APSTCPStream: 0x10ab87a00>: The operation couldn’t be completed. Socket is not connected
5/7/12 2:09:38.394 PM applepushserviced: <APSCourier: 0x7f8a615343a0>: Stream error occurred for <APSTCPStream: 0x10ab87a00>: The operation couldn’t be completed. (kCFErrorDomainCFNetwork error 2.)
5/7/12 2:09:38.414 PM applepushserviced: <APSCourier: 0x7f8a615343a0>: Stream error occurred for <APSTCPStream: 0x10ab73070>: The operation couldn’t be completed. (kCFErrorDomainCFNetwork error 2.)
5/7/12 2:09:39.301 PM applepushserviced: <APSCourier: 0x7f8a615343a0>: Stream error occurred for <APSTCPStream: 0x10ab73070>: The operation couldn’t be completed. (kCFErrorDomainCFNetwork error 2.)
5/7/12 5:34:43.403 PM applepushserviced: <APSCourier: 0x7f8a615343a0>: Stream error occurred for <APSTCPStream: 0x7f8a6150fc30>: The operation couldn’t be completed. Socket is not connected
5/7/12 5:34:43.430 PM applepushserviced: <APSCourier: 0x7f8a615343a0>: Stream error occurred for <APSTCPStream: 0x7f8a6150fc30>: The operation couldn’t be completed. (kCFErrorDomainCFNetwork error 2.)
5/7/12 5:34:43.447 PM applepushserviced: <APSCourier: 0x7f8a615343a0>: Stream error occurred for <APSTCPStream: 0x7f8a61526790>: The operation couldn’t be completed. (kCFErrorDomainCFNetwork error 2.)
5/7/12 5:34:45.952 PM applepushserviced: <APSCourier: 0x7f8a615343a0>: Stream error occurred for <APSTCPStream: 0x7f8a61526790>: The operation couldn’t be completed. (kCFErrorDomainCFNetwork error 2.)
5/7/12 6:20:48.145 PM applepushserviced: <APSCourier: 0x7f8a615343a0>: Stream error occurred for <APSTCPStream: 0x7f8a61501990>: The operation couldn’t be completed. Socket is not connected
5/7/12 6:20:48.169 PM applepushserviced: <APSCourier: 0x7f8a615343a0>: Stream error occurred for <APSTCPStream: 0x7f8a61501990>: The operation couldn’t be completed. (kCFErrorDomainCFNetwork error 2.)
5/7/12 6:20:48.178 PM applepushserviced: <APSCourier: 0x7f8a615343a0>: Stream error occurred for <APSTCPStream: 0x10ab6d360>: The operation couldn’t be completed. (kCFErrorDomainCFNetwork error 2.)
5/7/12 6:20:48.184 PM applepushserviced: <APSCourier: 0x7f8a615343a0>: Stream error occurred for <APSTCPStream: 0x7f8a61553e50>: The operation couldn’t be completed. (kCFErrorDomainCFNetwork error 2.)
5/7/12 6:33:59.398 PM applepushserviced: <APSCourier: 0x7f8a615343a0>: Stream error occurred for <APSTCPStream: 0x10ab58660>: The operation couldn’t be completed. (kCFErrorDomainCFNetwork error 2.)
5/7/12 6:34:01.913 PM applepushserviced: <APSCourier: 0x7f8a615343a0>: Stream error occurred for <APSTCPStream: 0x7f8a6150fc30>: The operation couldn’t be completed. (kCFErrorDomainCFNetwork error 2.)
5/7/12 6:57:20.569 PM applepushserviced: <APSCourier: 0x7f8a615343a0>: Stream error occurred for <APSTCPStream: 0x10ab66ab0>: The operation couldn’t be completed. Socket is not connected
5/7/12 6:57:20.583 PM applepushserviced: <APSCourier: 0x7f8a615343a0>: Stream error occurred for <APSTCPStream: 0x7f8a61504a40>: The operation couldn’t be completed. (kCFErrorDomainCFNetwork error 2.)
5/7/12 8:11:38.386 PM applepushserviced: <APSCourier: 0x7f8a615343a0>: Stream error occurred for <APSTCPStream: 0x7f8a61504a40>: The operation couldn’t be completed. (kCFErrorDomainCFNetwork error 2.)
5/7/12 9:14:13.280 PM applepushserviced: <APSCourier: 0x7f8a615343a0>: Stream error occurred for <APSTCPStream: 0x10ab68960>: The operation couldn’t be completed. Socket is not connected
5/7/12 9:14:13.298 PM applepushserviced: <APSCourier: 0x7f8a615343a0>: Stream error occurred for <APSTCPStream: 0x10ab68960>: The operation couldn’t be completed. (kCFErrorDomainCFNetwork error 2.)
5/7/12 9:14:13.311 PM applepushserviced: <APSCourier: 0x7f8a615343a0>: Stream error occurred for <APSTCPStream: 0x7f8a61526790>: The operation couldn’t be completed. (kCFErrorDomainCFNetwork error 2.)
5/7/12 9:14:14.076 PM applepushserviced: <APSCourier: 0x7f8a615343a0>: Stream error occurred for <APSTCPStream: 0x7f8a61501990>: The operation couldn’t be completed. (kCFErrorDomainCFNetwork error 2.)
5/7/12 9:23:52.792 PM applepushserviced: <APSCourier: 0x7f8a615343a0>: Stream error occurred for <APSTCPStream: 0x7f8a615479b0>: The operation couldn’t be completed. Socket is not connected
5/7/12 9:23:52.809 PM applepushserviced: <APSCourier: 0x7f8a615343a0>: Stream error occurred for <APSTCPStream: 0x10ab58270>: The operation couldn’t be completed. (kCFErrorDomainCFNetwork error 2.)
5/7/12 9:23:52.828 PM applepushserviced: <APSCourier: 0x7f8a615343a0>: Stream error occurred for <APSTCPStream: 0x10ab58270>: The operation couldn’t be completed. (kCFErrorDomainCFNetwork error 2.)
5/8/12 1:01:40.292 AM applepushserviced: <APSCourier: 0x7f8a615343a0>: Stream error occurred for <APSTCPStream: 0x10ab6d360>: The operation couldn’t be completed. Socket is not connected
5/8/12 1:01:40.307 AM applepushserviced: <APSCourier: 0x7f8a615343a0>: Stream error occurred for <APSTCPStream: 0x10ab6d360>: The operation couldn’t be completed. (kCFErrorDomainCFNetwork error 2.)
5/8/12 1:01:40.312 AM applepushserviced: <APSCourier: 0x7f8a615343a0>: Stream error occurred for <APSTCPStream: 0x10ab3fe30>: The operation couldn’t be completed. (kCFErrorDomainCFNetwork error 2.)
5/8/12 2:49:58.175 AM applepushserviced: <APSCourier: 0x7f8a615343a0>: Stream error occurred for <APSTCPStream: 0x10ab3fe30>: The operation couldn’t be completed. (kCFErrorDomainCFNetwork error 2.)
5/8/12 5:31:59.322 AM applepushserviced: <APSCourier: 0x7f8a615343a0>: Stream error occurred for <APSTCPStream: 0x10ab6d360>: The operation couldn’t be completed. (kCFErrorDomainCFNetwork error 2.)
5/8/12 5:32:00.256 AM applepushserviced: <APSCourier: 0x7f8a615343a0>: Stream error occurred for <APSTCPStream: 0x7f8a61526790>: The operation couldn’t be completed. (kCFErrorDomainCFNetwork error 2.)
5/8/12 5:32:01.763 AM applepushserviced: <APSCourier: 0x7f8a615343a0>: Stream error occurred for <APSTCPStream: 0x7f8a61526790>: The operation couldn’t be completed. (kCFErrorDomainCFNetwork error 2.)
5/8/12 5:32:02.767 AM applepushserviced: <APSCourier: 0x7f8a615343a0>: Stream error occurred for <APSTCPStream: 0x7f8a6150fc30>: The operation couldn’t be completed. (kCFErrorDomainCFNetwork error 2.)
5/8/12 6:02:10.243 AM applepushserviced: <APSCourier: 0x7f8a615343a0>: Stream error occurred for <APSTCPStream: 0x7f8a615479b0>: The operation couldn’t be completed. Socket is not connected
5/8/12 6:02:10.268 AM applepushserviced: <APSCourier: 0x7f8a615343a0>: Stream error occurred for <APSTCPStream: 0x7f8a615479b0>: The operation couldn’t be completed. (kCFErrorDomainCFNetwork error 2.)
5/8/12 6:02:10.323 AM applepushserviced: <APSCourier: 0x7f8a615343a0>: Stream error occurred for <APSTCPStream: 0x10ab3fe30>: The operation couldn’t be completed. (kCFErrorDomainCFNetwork error 2.)
5/8/12 6:02:12.129 AM applepushserviced: <APSCourier: 0x7f8a615343a0>: Stream error occurred for <APSTCPStream: 0x7f8a61554bf0>: The operation couldn’t be completed. (kCFErrorDomainCFNetwork error 2.)
5/8/12 6:02:14.638 AM applepushserviced: <APSCourier: 0x7f8a615343a0>: Stream error occurred for <APSTCPStream: 0x7f8a61554bf0>: The operation couldn’t be completed. (kCFErrorDomainCFNetwork error 2.)
5/8/12 10:58:53.278 AM applepushserviced: <APSCourier: 0x7f8a615343a0>: Stream error occurred for <APSTCPStream: 0x10ab68960>: The operation couldn’t be completed. Socket is not connected
5/8/12 10:58:53.307 AM applepushserviced: <APSCourier: 0x7f8a615343a0>: Stream error occurred for <APSTCPStream: 0x10ab68960>: The operation couldn’t be completed. (kCFErrorDomainCFNetwork error 2.)
5/8/12 10:58:53.315 AM applepushserviced: <APSCourier: 0x7f8a615343a0>: Stream error occurred for <APSTCPStream: 0x10ab68960>: The operation couldn’t be completed. (kCFErrorDomainCFNetwork error 2.)
5/8/12 11:41:08.131 AM applepushserviced: <APSCourier: 0x7f8a615343a0>: Stream error occurred for <APSTCPStream: 0x7f8a615291a0>: The operation couldn’t be completed. Socket is not connected
5/8/12 11:41:08.152 AM applepushserviced: <APSCourier: 0x7f8a615343a0>: Stream error occurred for <APSTCPStream: 0x7f8a615291a0>: The operation couldn’t be completed. (kCFErrorDomainCFNetwork error 2.)
5/8/12 11:41:08.249 AM applepushserviced: <APSCourier: 0x7f8a615343a0>: Stream error occurred for <APSTCPStream: 0x7f8a615168f0>: The operation couldn’t be completed. (kCFErrorDomainCFNetwork error 2.)
5/8/12 11:41:09.746 AM applepushserviced: <APSCourier: 0x7f8a615343a0>: Stream error occurred for <APSTCPStream: 0x10ab73070>: The operation couldn’t be completed. (kCFErrorDomainCFNetwork error 2.)
5/8/12 11:46:54.727 AM applepushserviced: <APSCourier: 0x7f8a615343a0>: Stream error occurred for <APSTCPStream: 0x10ab63590>: The operation couldn’t be completed. Socket is not connected
5/8/12 11:46:54.740 AM applepushserviced: <APSCourier: 0x7f8a615343a0>: Stream error occurred for <APSTCPStream: 0x10ab63590>: The operation couldn’t be completed. (kCFErrorDomainCFNetwork error 2.)
5/8/12 11:46:54.746 AM applepushserviced: <APSCourier: 0x7f8a615343a0>: Stream error occurred for <APSTCPStream: 0x7f8a61504a40>: The operation couldn’t be completed. (kCFErrorDomainCFNetwork error 2.)
5/8/12 1:55:41.541 PM applepushserviced: <APSCourier: 0x7f8a615343a0>: Stream error occurred for <APSTCPStream: 0x10ab73070>: The operation couldn’t be completed. (kCFErrorDomainCFNetwork error 2.)
5/8/12 1:55:44.051 PM applepushserviced: <APSCourier: 0x7f8a615343a0>: Stream error occurred for <APSTCPStream: 0x10ab66ab0>: The operation couldn’t be completed. (kCFErrorDomainCFNetwork error 2.)I get same error, i was trying to, understand why the host in my Terminal was "HOST139cddb40e29 " and not "MacBookHouse", then after the same error you get i see this two lines, just after:
21/06/12 13:05:22,371 configd: network configuration changed.
21/06/12 13:05:22,747 configd: setting hostname to "HOST139cddb40e29"
May be make some sense to somebody. i will see... -
Cisco Works "Devices not configured in ACS"
Hi!
I have instaled Cisco Works ver. 4.3.1
I have added using the Device Discovery, my devices. Some of them where not configured already on ACS with the loopback address, that was the one on the discovery configurations. Because of that, i could not manage those devices, althoug i could authenticate on them. I then updated the ACS with the loopback address, and configured the router's to authenticate using the source-interface of the loopback.
The problem is that i keep not being able to manage this devices on the cworks, because the are still as "Devices not configured in ACS".
Can anyone help me here?
Regard's
Miguel AmaralHi,
This happens, when you integrate the ciscoworks with ACS and Router/switches not configured with ACS. Try to reconfigure the device in ACS, try removing and adding it again in common services...Try for a single device and check it out... Try stopping/starting cw services after that // net stop crmdmgtd, net start crmdmgtd. Revert with the results.. -
salve, quando l'imac va in stop per piu di mezz'ora, si verifica questo problema con il riavvio automatico dell'imac. vi allego l'errore riportato successivamente:
qualcuno sa aiutarmi? devo portarlo al centro assistenza, oppure è un problema software?
grazie anticipatamente.
Interval Since Last Panic Report: 4029 sec
Panics Since Last Report: 1
Anonymous UUID: AF050C7A-7389-B1EC-49D7-FD6897671560
Tue Apr 2 17:20:06 2013
panic(cpu 4 caller 0xffffff80286b7e95): Kernel trap at 0xffffff7fa8f3ce49, type 14=page fault, registers:
CR0: 0x000000008001003b, CR2: 0x0000000000000040, CR3: 0x000000002b07e000, CR4: 0x00000000001606e0
RAX: 0x0000000000000000, RBX: 0x0000000000000001, RCX: 0x0000000000000000, RDX: 0x0000000000002400
RSP: 0xffffff8217b1b910, RBP: 0xffffff8217b1b9b0, RSI: 0x0000000000000000, RDI: 0xffffff81c9ab8000
R8: 0x0000000000000001, R9: 0x00000000000003ff, R10: 0xffffffffffffffff, R11: 0x00000000ffffffff
R12: 0x0000000000000000, R13: 0xffffff8217b1bcf8, R14: 0xffffff81c9ab8000, R15: 0x00000000ffffff00
RFL: 0x0000000000010282, RIP: 0xffffff7fa8f3ce49, CS: 0x0000000000000008, SS: 0x0000000000000010
Fault CR2: 0x0000000000000040, Error code: 0x0000000000000000, Fault CPU: 0x4
Backtrace (CPU 4), Frame : Return Address
0xffffff8217b1b5b0 : 0xffffff802861d626
0xffffff8217b1b620 : 0xffffff80286b7e95
0xffffff8217b1b7f0 : 0xffffff80286cd4dd
0xffffff8217b1b810 : 0xffffff7fa8f3ce49
0xffffff8217b1b9b0 : 0xffffff7fa8f317f7
0xffffff8217b1bbf0 : 0xffffff7fa8cdb387
0xffffff8217b1bc60 : 0xffffff7fa8cc757b
0xffffff8217b1bcd0 : 0xffffff7fa8cca1b8
0xffffff8217b1bd40 : 0xffffff7fa8cca343
0xffffff8217b1bdb0 : 0xffffff7fa8cc9db4
0xffffff8217b1be10 : 0xffffff7fa8c90c78
0xffffff8217b1be50 : 0xffffff7fa8c8ff63
0xffffff8217b1be80 : 0xffffff7fa8c8f31e
0xffffff8217b1bef0 : 0xffffff8028a467a8
0xffffff8217b1bf30 : 0xffffff8028a452aa
0xffffff8217b1bf80 : 0xffffff8028a453d9
0xffffff8217b1bfb0 : 0xffffff80286b2977
Kernel Extensions in backtrace:
com.apple.iokit.IOGraphicsFamily(2.3.7)[74E3E50F-E50A-3073-8C96-06F854292A91]@0 xffffff7fa8c82000->0xffffff7fa8cb9fff
dependency: com.apple.iokit.IOPCIFamily(2.7.3)[1D668879-BEF8-3C58-ABFE-FAC6B3E9A292]@0xffff ff7fa8c44000
com.apple.iokit.IONDRVSupport(2.3.7)[38C214C0-83C8-3594-8A4C-DC6AC3FEC163]@0xff ffff7fa8cc5000->0xffffff7fa8cd6fff
dependency: com.apple.iokit.IOGraphicsFamily(2.3.7)[74E3E50F-E50A-3073-8C96-06F854292A91]@0 xffffff7fa8c82000
dependency: com.apple.iokit.IOPCIFamily(2.7.3)[1D668879-BEF8-3C58-ABFE-FAC6B3E9A292]@0xffff ff7fa8c44000
com.apple.NVDAResman(8.1)[A26D2A3D-C06F-3A0F-BCFF-901A98C93C3D]@0xffffff7fa8cd9 000->0xffffff7fa8fe6fff
dependency: com.apple.iokit.IOPCIFamily(2.7.3)[1D668879-BEF8-3C58-ABFE-FAC6B3E9A292]@0xffff ff7fa8c44000
dependency: com.apple.iokit.IONDRVSupport(2.3.7)[38C214C0-83C8-3594-8A4C-DC6AC3FEC163]@0xff ffff7fa8cc5000
dependency: com.apple.iokit.IOGraphicsFamily(2.3.7)[74E3E50F-E50A-3073-8C96-06F854292A91]@0 xffffff7fa8c82000
BSD process name corresponding to current thread: kernel_task
Mac OS version:
12D78
Kernel version:
Darwin Kernel Version 12.3.0: Sun Jan 6 22:37:10 PST 2013; root:xnu-2050.22.13~1/RELEASE_X86_64
Kernel UUID: 3EB7D8A7-C2D3-32EC-80F4-AB37D61492C6
Kernel slide: 0x0000000028400000
Kernel text base: 0xffffff8028600000
System model name: iMac13,2 (Mac-FC02E91DDD3FA6A4)
System uptime in nanoseconds: 2237511953568
last loaded kext at 42615241689: com.apple.filesystems.msdosfs 1.8 (addr 0xffffff7fa9308000, size 65536)
last unloaded kext at 102432491583: com.apple.driver.AppleFileSystemDriver 3.0.1 (addr 0xffffff7faa8a9000, size 8192)
loaded kexts:
com.nvidia.CUDA 1.1.0
com.apple.filesystems.msdosfs 1.8
com.apple.driver.AppleBluetoothMultitouch 75.19
com.apple.driver.AppleHWSensor 1.9.5d0
com.apple.iokit.IOBluetoothSerialManager 4.1.3f3
com.apple.filesystems.autofs 3.0
com.apple.driver.AudioAUUC 1.60
com.apple.driver.AppleMikeyHIDDriver 122
com.apple.driver.AGPM 100.12.87
com.apple.driver.X86PlatformShim 1.0.0
com.apple.driver.ApplePlatformEnabler 2.0.6d1
com.apple.driver.AppleHDA 2.3.7fc4
com.apple.driver.AppleUpstreamUserClient 3.5.10
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.GeForce 8.1.0
com.apple.driver.AppleMikeyDriver 2.3.7fc4
com.apple.iokit.BroadcomBluetoothHCIControllerUSBTransport 4.1.3f3
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AppleBacklight 170.2.5
com.apple.driver.AppleIntelHD4000Graphics 8.1.0
com.apple.driver.AppleLPC 1.6.0
com.apple.driver.ApplePolicyControl 3.3.0
com.apple.driver.AppleMCCSControl 1.1.11
com.apple.driver.AppleIntelFramebufferCapri 8.1.0
com.apple.driver.AppleSMCLMU 2.0.3d0
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 34
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCIBlockStorage 2.3.1
com.apple.driver.AppleSDXC 1.4.0
com.apple.driver.AppleUSBHub 5.5.5
com.apple.iokit.AppleBCM5701Ethernet 3.6.0b1
com.apple.driver.AirPort.Brcm4331 614.20.16
com.apple.driver.AppleAHCIPort 2.5.1
com.apple.driver.AppleUSBEHCI 5.5.0
com.apple.driver.AppleUSBXHCI 5.5.5
com.apple.driver.AppleEFINVRAM 1.7
com.apple.driver.AppleACPIButtons 1.7
com.apple.driver.AppleRTC 1.5
com.apple.driver.AppleHPET 1.8
com.apple.driver.AppleSMBIOS 1.9
com.apple.driver.AppleACPIEC 1.7
com.apple.driver.AppleAPIC 1.6
com.apple.driver.AppleIntelCPUPowerManagementClient 196.0.0
com.apple.nke.applicationfirewall 4.0.39
com.apple.security.quarantine 2
com.apple.driver.AppleIntelCPUPowerManagement 196.0.0
com.apple.driver.AppleBluetoothHIDKeyboard 170.2
com.apple.driver.AppleHIDKeyboard 170.2
com.apple.driver.IOBluetoothHIDDriver 4.1.3f3
com.apple.driver.AppleMultitouchDriver 235.29
com.apple.iokit.IOSerialFamily 10.0.6
com.apple.kext.triggers 1.0
com.apple.iokit.IOSCSIArchitectureModelFamily 3.5.5
com.apple.driver.DspFuncLib 2.3.7fc4
com.apple.iokit.IOAudioFamily 1.8.9fc11
com.apple.kext.OSvKernDSPLib 1.6
com.apple.iokit.IOSurface 86.0.4
com.apple.nvidia.gk100hal 8.1.0
com.apple.NVDAResman 8.1.0
com.apple.iokit.IOBluetoothFamily 4.1.3f3
com.apple.iokit.AppleBluetoothHCIControllerUSBTransport 4.1.3f3
com.apple.driver.AppleBacklightExpert 1.0.4
com.apple.iokit.IOAcceleratorFamily 30.14
com.apple.driver.X86PlatformPlugin 1.0.0
com.apple.driver.AppleSMBusPCI 1.0.11d0
com.apple.driver.AppleHDAController 2.3.7fc4
com.apple.iokit.IOHDAFamily 2.3.7fc4
com.apple.driver.IOPlatformPluginFamily 5.3.0d51
com.apple.driver.AppleGraphicsControl 3.3.0
com.apple.driver.AppleSMBusController 1.0.11d0
com.apple.iokit.IONDRVSupport 2.3.7
com.apple.driver.AppleSMC 3.1.4d2
com.apple.iokit.IOGraphicsFamily 2.3.7
com.apple.driver.AppleThunderboltEDMSink 1.1.8
com.apple.driver.AppleThunderboltEDMSource 1.1.8
com.apple.driver.AppleThunderboltDPOutAdapter 1.8.9
com.apple.driver.AppleThunderboltDPInAdapter 1.8.9
com.apple.driver.AppleThunderboltDPAdapterFamily 1.8.9
com.apple.driver.AppleThunderboltPCIDownAdapter 1.2.6
com.apple.driver.AppleUSBMergeNub 5.5.5
com.apple.driver.AppleUSBComposite 5.2.5
com.apple.driver.AppleThunderboltNHI 1.6.3
com.apple.iokit.IOThunderboltFamily 2.2.6
com.apple.iokit.IOEthernetAVBController 1.0.2b1
com.apple.iokit.IOUSBUserClient 5.5.5
com.apple.iokit.IO80211Family 522.4
com.apple.iokit.IONetworkingFamily 3.0
com.apple.iokit.IOAHCIFamily 2.3.1
com.apple.iokit.IOUSBFamily 5.5.5
com.apple.iokit.IOHIDFamily 1.8.1
com.apple.driver.AppleEFIRuntime 1.7
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 220.2
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 7
com.apple.driver.DiskImages 345
com.apple.iokit.IOStorageFamily 1.8
com.apple.driver.AppleKeyStore 28.21
com.apple.driver.AppleACPIPlatform 1.7
com.apple.iokit.IOPCIFamily 2.7.3
com.apple.iokit.IOACPIFamily 1.4
com.apple.kec.corecrypto 1.0
Model: iMac13,2, BootROM IM131.010A.B05, 4 processors, Intel Core i7, 3.4 GHz, 16 GB, SMC 2.11f14
Graphics: NVIDIA GeForce GTX 680MX, NVIDIA GeForce GTX 680MX, PCIe, 2048 MB
Memory Module: BANK 0/DIMM0, 8 GB, DDR3, 1600 MHz, 0x80AD, 0x484D5434314753364D465238432D50422020
Memory Module: BANK 1/DIMM0, 8 GB, DDR3, 1600 MHz, 0x80AD, 0x484D5434314753364D465238432D50422020
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0xF4), Broadcom BCM43xx 1.0 (5.106.98.100.16)
Bluetooth: Version 4.1.3f3 11349, 2 service, 18 devices, 1 incoming serial ports
Network Service: Wi-Fi, AirPort, en1
Serial ATA Device: APPLE HDD ST1000DM003, 1 TB
USB Device: hub_device, 0x8087 (Intel Corporation), 0x0024, 0x1a100000 / 2
USB Device: FaceTime HD Camera (Built-in), apple_vendor_id, 0x8511, 0x1a110000 / 3
USB Device: hub_device, 0x8087 (Intel Corporation), 0x0024, 0x1d100000 / 2
USB Device: hub_device, 0x0424 (SMSC), 0x2412, 0x1d180000 / 3
USB Device: BRCM20702 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0x1d181000 / 4
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x828b, 0x1d181300 / 7Ciao,
Mentre la relazione indica qualche problema video, potrebbe essere qualcos'altro.
Quello che tutti i dispositivi sono collegati, in particolare gli articoli USB?
Un modo per verificare è quello di avvio in modalità provvisoria dal HD, (tasto Shift si tiene premuto in fase di boot), eseguire Utility Disco in Applicazioni> Utility, quindi evidenziare l'unità, fare clic su Autorizzazioni di riparazione, di prova per il problema in modalità provvisoria ...
PS. Modalità provvisoria può rimanere il radiante grigio per lungo tempo, lasciarlo andare, si sta cercando di riparare il disco rigido
Riavviare, prova di nuovo.
Se lo fa solo in avvio normale, allora potrebbe essere un problema hardware come scheda video, (quarzo è spento in modalità provvisoria), o aeroporto, o un dispositivo USB o Firewire, o 3rd party add-on, Check Preferenze di Sistema > Account (utenti e gruppi a successive versioni OSX) Accedi> Articoli da finestra per vedere se qualcosa di rilevante o è elencato.
Controllare le Preferenze di Sistema> Row altri, per 3a parte riquadri Pref.
Vedi anche in queste, se esistono, alcuni sono invisibili ...
/ private / var / run / StartupItems
/ Library / StartupItems
/ System / Library / StartupItems
/ System / Library / LaunchDaemons
/ Library / LaunchDaemons -
I have some devices in my LMS 3.2 Master-Slave ACS-mode, that are, according to the DCR and AAA portlet, not configured in ACS
However I have checked that the devices are in ACS (in NDG and based on ip addresses, unique or by using wildcards)
What could be the reason why LMS can't find the devices in ACS?Hi,
If you have configured the devices in ACS and the LMS and ACS intergrity has been done then we need to break the integrity and redo it once again.
break the ACS and cisco works integrity, restart the deamons and then integrate it once again.
Please let me know if it helps.
Regards,
podhillo -
Ciscoworks - devices "not configured in ACS"
Hi all,
Can anyone explain why Ciscoworks places some new devices in the above category even when the device config, ACS, etc is all configured correctly? I have a handful of devices that keep going into this category and there is nothing I can do to stop it happening - it is a real hassle as you have to then set CW to non ACS mode restart the daemon, delete the entries etc etc.
If anyone can describe how I can get CW to manage such devices properly and possibly even tell me how to stop it happening in the future it would be of great help.
Many thanks in advance (though I know some of you would rather have points ;-)
ScottHi Scott ,
Device will fall to " Devices not Configured in ACS " only in 2 condition :
1. Device is actually does not Exist in ACS
2. It EXist in ACS with different IPADDRESS or HOST NAME.
There is no direct way to delete these devices once they are on the Not Configured
in ACS list. However, one workaround is:
Step 1. Create a dummy NDG group in ACS to include these devices.
Step 2. Delete the devices in DCR and then in ACS.
Note: In order to delete a device from DCR we need to follow this procedure:
1.- Go to Common Services >> Devices and Credentials >> Reports >>
Devices that are not configured in ACS and generate a report.
2.- Now that we have all the devices that we want to delete, please go to
Common Services
>> Device and Credentials >> Device Management and select all the devices
from CS (Common Services database).
3.- Click on Delete and a confirmation message will pop, agree to this.
I hope this will help you
Thanks
Afroj -
I updated Firefox yesterday to 3.6.9. When I receive a URL link in an email within Outlook, I cannot open the link in Firefox. As I said in the question, when I click on the link, a Microsoft Office Outlook error message appears which states that a General failure has occurred in sending the command to the application (which is Firefox). I am using Office 2007 This did not occur prior to the upgrade of Firefox.
See this lnk for a fix, it worked for me!
http://www.pcworld.com/article/200103/fix_outlook_general_failure_error_for_email_links.html -
Error 10846 occurs only if DMA mode for transfer ist selected
Hello,
my problem is if I use the DMA mode to for transferring data to the PCs memory always the error 10846 occurs.
I perform the buffered semiperiod measurement with a continuous buffer (circular buffer).
I tried to use Interrupts. The error does not occured.
Is this a known problem?
I read another thread in this forum. But there are no useful answers up to now.
I'm thankful for any hints.
Regards PeterHi Peter,
The NI-DAQ Help Manual gives this description for the error:
"Your application was unable to retrieve data from the background acquisition buffer fast enough so the unretrieved data was overwritten with new data. To prevent this error, you might increase the size of the background acquisition buffer, increase the amount of data you read from it per call to the read function/VI, slow down your acquisition rate, or reduce the number of tasks your computer is performing."
This is all valid info because I believe that your acquisition rate is on the verge of being too fast for your buffer size and the number of data points you are reading into your application each time. Therefore, DMA, which is a faster transfer mechanism to get data from your c
ard to the PC memory is probably loading the PC memory with many samples until it catches up with the data acquisition card where as Interrupts will gradually transfer the data to the PC memory. This means DMA is bursting data to a PC memory buffer that is slightly too small while Interrupts are transferring at the same rate you are reading (unless you change your acquisition rate depending on the transfer protocol).
I think the only change you need is to increase the size of your buffer (PC memory). If that doesn't work, also increase the number of points you read from the buffer each time by your application program. There will be a balance between these two numbers that will allow smooth operation with DMA. Hope that helps.
Ron -
We have a DotNet website which is deployed on a physical server(windows server 2008 r2). The application is started to using for live. Most of the time application is working fine. But some times we have noticed the application is failed to communicate
with MS SQL 2008 R2 database and as result the below error is displaying:
"A severe error occurred on the current command. The results, if any, should be discarded. at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction) at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject
stateObj, Boolean callerHasConnectionLock, Boolean asyncClose) at System.Data.SqlClient.TdsParser.TryRun(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj, Boolean&
dataReady) at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj) at System.Data.SqlClient.SqlInternalConnectionTds.CompleteLogin(Boolean
enlistOK) "
If we tried to connect the database server the same issue is showing:"A severe error occurred on the current command. The results, if any, should be discarded"
The issue will be resolved automatically after 30-45 minutes . Please let us know if any fixes can be done to resolve this issue.
NOTE: We have installed SQL Server 2008 service pack 3 as per the suggestion from experts .But still the issue pwersist.Hello,
When this issue occurs have you check the existing connections? If an app was unclean developed it can happen that the app opens connection by connection, but never closed them correctly and when all available connections are in use, such an error can occur.
Olaf Helper
[ Blog] [ Xing] [ MVP] -
I purchased Mountain Lion and it was downloaded upto 4.2 GB but then my internet connection went down and it started showing as 'waiting'. when the connection came back it didn't resume the download and vanished. On the 'purchases' icon in Appstore it says 'an error has occurred' and even after pressing download again and again The download is not starting. On the finder Mountain Lion Icon shows as waiting.
What to do? I have tried unfinished downloads section in 'Store' but it says no unfinished downloads. Please help.You can have iTS clear the DL que.
iTunes Store Support
http://www.apple.com/emea/support/itunes/contact.html
Maybe you are looking for
-
"..a problem and has to close" message. I've searched around a few times and haven't found any solution on here. But I think I might have found another issue because now my Quick-time (Though I barely use it.) isn't working either. Below I have copy-
-
How do you stop syncing address and calendar to iCloud? I only want to sync from my computer to iPhone. This is because I cannont upgrade to Lion and I do not want to get duplicate contacts when I sync from the computer 10.6.8 to my iPhone iOS5. Y
-
Calling a javascript on load of jsff page
I have a jsff page which is loaded as a taskflow from region. i tried to call an alert function on load of jsff page as follows: <af:clientListener type="load" method="jsMethod"/> <af:resource type="javascript"> function jsMethod() {
-
Performance reports using Grid Control
Hello! Can we create and schedule database performance reports using oracle 10g grid control? Thanks.
-
Video (Only Audio) Works on Mac-Created QT Web Movie
I'm on a Mac with iMovie 6. When I export a Quicktime movie using the standard Web export setting then post it on the Internet, PC users can only hear the audio but not see the video portion. What am I missing? Thanks! G5, Tibook Mac OS X (10.4.7) G5