ACS 5.5 Radius Attribute not listed in Radius Directory

                   Hello Community,
iam on the evaluation on Cisco ACS 5.5, and iam trying some scenarios for my company.
I have to authenticate a ip phone . here i need one VLan tagged and one vlan untagged.
In the authorization profile u can add the Radius Attributes, we got hp switches and i need the attribute  with the ID-56, but this ID ist not listed in the Authorization Profiles--> Radius Attributes-->select Part.
But it is listed under system-administration->Configuration-->dictionaries-->Protocols->Radius--> Radius IETF
come somebody tell me how i can selct this Attributes under Authorization Profiles--> Radius Attributes-->select Part. ??
Thanks a lot
regards

Hi
As you are using HP switches, certain advanced use cases, such as those that involve posture assessment, profiling, and web authentication, are not consistently available with non-Cisco devices or may provide limited functionality, and are therefore not supported with non-Cisco devices.
For more information regarding Authorization profile configuration, please go through the following link:
http://www.cisco.com/c/en/us/td/docs/net_mgmt/cisco_secure_access_control_system/5-5/user/guide/acsuserguide/pol_elem.html

Similar Messages

  • Parse Error: Reason - Radius attribute not outbound

    I am trying to add the RADIUS IETF Attribute - 'Login-LAT-Group' to a user using RDBMS sync but unable to do so.
    I see the below error in the ACS logs - 
    Parse Error: Reason - Radius attribute not outbound
    What am I missing ?

    Refer " outbound radius attributes"
    http://www.cisco.com/en/US/docs/net_mgmt/cisco_secure_access_control_server_for_windows/3.3/user/guide/ad.html

  • Why RADIUS is not listed on ACS "Group Setup" list ?

    On ACS 3.3, I go to main menu,
    I choose "Interface Configuration".
    I make sure that "IETF RADIUS Attributes" is selected.
    Then I refresh the browser, I go to "Group Setup".
    On the top of the page, I attempt to pick "RADIUS" configuration. However it doesn't appear listed there.
    As you can see on the attached bitmap, only few options are available even though I selected a number of them from User Interface as an exercise.
    Please note that I already mapped a couple of Windows groups to the respective ACS Groups so
    that I configure VPN and Wireless authentication.
    Any idea what am I missing here ?
    Why RADIUS configuration option doesn't show up ?
    I already attempted to close and relaunch ACS Admin,
    no progress.

    In fact I don't recall I added a "RADIUS device";
    Is that just a configuration or do I need to physically connect a special server there ?
    Sorry for my ignorance, but I thought that the ACS server I am working on would be the provider of RADIUS services ? Can you clarify that ?

  • Attributes not listed for Adm

    The issue is where the values for attributes (ex. Cost Centers) are not listed for the Administrator.  The Attribute section is located in 2 sections:  Manage Employee Data and Edit Attributes.
    We added a note 910076 a couple of days back in DEV, which removed the ‘Add New Line’ button. 
    Any suggestions and fix are welcome.
    Points will be rewarded amfully.
    Cheers,
    Lokesh.

    Hi Lokesh,
    Check the Adm attributes in the org structure and make sure correct backend system is in the attributes.
    Thank you

  • Cisco ACE 20 - sticky radius attribute not working

    Hello to you all
    I need your help. I´m trying to create a sticky group applied to my auth serverfarm based on the calling-station-id attribute, but for some reason when I apply the configs, I get not replies from my rservers. I´ve checked the radius servers, and no packets are getting to them. For some reason, when I create the sticky group the ACE 20 doesn´t distribute the traffic at all.
    The service-policy is inservice, all the rservers are operational, but there´s no replies to my authentication requests, and no entries in the sticky database.
    My current configs:
    ADMIN context:
    resource-class RADIUS-STICKY
      limit-resource all minimum 0.00 maximum unlimited
      limit-resource sticky minimum 10.00 maximum unlimited
    context context-radius
    member RADIUS-STICKY
    CONTEXT-RADIUS context:
    serverfarm host RADIUS-AUTH
      predictor leastconns
      probe RADIUS-PROBE-AUTH
      rserver RADIUS-01
        inservice
      rserver RADIUS-02
        inservice
      rserver RADIUS-03
        inservice
    sticky radius framed-ip calling-station-id RADIUS-AUTH
    serverfarm RADIUS-AUTH
    timeout 5
    policy-map type loadbalance first-match RADIUS-AUTH
      class class-default
        sticky-serverfarm RADIUS-AUTH
    Am I missing anything?
    Best wishes

    I figured it out
    The loadbalance policy-map has to be set has a L7 Radius policy map:
    policy-map type loadbalance radius first-match RADIUS-AUTH
      class class-default
        sticky-serverfarm RADIUS-AUTH
    It now inspects the Radius packets and is able to apply stickiness.

  • Podcasts not listed in podcast directory

    When I download a podcast, they now seem to go to the main music folder and not the podcast folder on my iPod. Any ideas as to what happened? Thanks
    Gateway   Windows XP  

    Number next to podcasts is the number of unplayed episodes in library.
    Blue dot next to podcast name indicates latest episode for that podcast is unplayed.
    Played status changes as soon as play starts.
    Play count changes at end of track playing.
    Selecting podcast in left pane shows podcast list in right pane as you know. Click on blue triangle to left of podcast name to expand list to see individual episodes.

  • Contact name not listed in skype directory

    Skype won't recognize either a existing contact's name, email, user name, or telephone number

    it's important to use 10-digit or fullly compliant international numbers for all contacts to keep things working smootly.
    on the other hand, if when you have the contact properly filled out and the recent calls or sms list show just the number it's likely a corrupted addressbook.
    I had this problem since i restored my iPhone 4 onto my iPhone 4s. turned out to be a corrupted address book database on the phone.
    deleting the database @ /Users/Library/AddressBook (all files starting with AddressBook) (while Addressbook NOT running and when iCloud sync and iTunes sync both off) and re-run address book to create empty database before re enable sync solved it!

  • Message interface not listed in integration directory

    hi,
    i have created 2 interfaces inside my message interface........
    both are outbound.....!!
    i am actually doing 2 scenario's inside the same name space......
    when i go to integration directory i am no able to get one of the message interface's while creating the receiver determination and all those things.........?

    if ur using business service then just
    add outbound interface in receiver side and 
    inbound interface in sender side.
    or if u r using business system then the problem is in ur SLD.
    just check ur business system over their.
    thanks
    reward point if helpful .

  • ACS 5.1 RADIUS Proxy - Adding RADIUS attributes

    Is there anyway under ACS 5.1 to add RADIUS attributes to outgoing RADIUS proxy auth requests or failing this to RADIUS proxy accounting updates?
    As soon as I configure a RADIUS proxy services, there is little config I can do other than to say whether or not the prefix and suffix is to be stripped.
    I can add these attributes if using an external RADIUS box as an identity store, but I cannot do this for this particular service and instead I need to use RADIUS proxying.
    Thanks
    Paul

    Hi Steve,
    The shared secret is 100% correct.
    Finally I find out that there may be some white lists for attributes.
    If I keep NAS-Identifier , it will work.
    But it can't pass all VSA (3GPP sub-attributes) , it only shows one or three in BOTH ACS and RADIUS Server.
    The other is the RADIUS VSA User Define Options (which is in SA > C > D > P > RADIUS > RADIUS VSA > Edit ) .
    When 'Vendor Length Field Size' changes to 0 , All sub-attributes pass thought ACS .
    The RADIUS Server gets the message from NSA.
    Of course, there is the Proxy-State attribute.
    In this condition, the ACS has incorrect output in the sub-attribute.
    Now I try 5.2 to see the problem exist or not.

  • H323 cisco attributes not being forwarded to Radius accounting server

    I have enabled a Radius server to gather AAA Accounting CDR records but I don't see any of the Cisco h323 attributes. The following is an example of the list I WANT to see.
    ATTRIBUTE h323-remote-address 23 string Cisco
    ATTRIBUTE h323-conf-id 24 string Cisco
    ATTRIBUTE h323-setup-time 25 string Cisco
    ATTRIBUTE h323-call-origin 26 string Cisco
    ATTRIBUTE h323-call-type 27 string Cisco
    ATTRIBUTE h323-connect-time 28 string Cisco
    ATTRIBUTE h323-disconnect-time 29 string Cisco
    ATTRIBUTE h323-disconnect-cause 30 string Cisco
    ATTRIBUTE h323-voice-quality 31 string Cisco
    ATTRIBUTE h323-gw-id 33 string Cisco
    ATTRIBUTE h323-incoming-conf-id 35 string Cisco
    I see a lot of stuff comming in, but I don't see any of the attributes above.
    PS. when I do a DEBUG AAA ACCOUNTING here's what I see.
    *Oct 8 18:00:19.681: AAA/ACCT/CONN(00001863): STOP protocol reply FAIL
    *Oct 8 18:00:19.681: AAA/ACCT(00001863): Accouting method=NOT_SET
    Here's my config
    aaa new-model
    aaa group server radius ACS
    server X.X.X.X auth-port 1645 acct-port 1646
    aaa authentication login h323 group ACS
    aaa authentication login no_rad local
    aaa accounting update newinfo
    aaa accounting exec default start-stop group ACS
    aaa accounting connection default start-stop group ACS
    aaa accounting connection h323 start-stop group ACS
    aaa session-id common
    gw-accounting aaa
    attribute acct-session-id overloaded
    attribute h323-remote-id resolved
    acct-template callhistory-detail
    radius-server host X.X.X.X auth-port 1645 acct-port 1646
    radius-server timeout 60
    radius-server key XXXXX
    radius-server authorization permit missing Service-Type
    radius-server vsa send accounting
    radius-server vsa send authentication
    dial-peer voice 447 voip
    destination-pattern 1647280....
    voice-class aaa 1
    session target ipv4:X.X.X.X
    Any ideas?
    thanks,
    Paul

    Try the following command:
    gw-accounting h323 vsa
    See here (http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122newft/122tcr/122tvr/vrg_g1.htm#wp1505752) for details.

  • ACS 4.2 Windows Radius Attributes for VPN-dial-in

    Hello,
    this Situation:
    Remote-User establish a VPN-Connection (AnyConnect) to a ASA 8.4, ASA forwards Authentication to ACS 4.2. , ACS should assign IP-Adress from a Adress-Pool dependent on GroupMembership (LDAP)
    the Problem:
    the User gets an IP-Config with a Default-Gateway which is always the 3.Address of the IP-Pool (IP-Pools are /28 Ranges), the Mask is ok (/32).
    On the ASA-Log I can see a Message:
    %ASA-6-110002: Failed to locate egress interface for protocol from src interface:src IP/src port to dest IP/dest port
    I've assigned following Attibutes:
    IP Assignement: Assigned from AAA server pool (the accordant pool is selected)
    IETF Radius Attributes:
    006 Service Type: Framed
    007 Framed Protocol: ppp
    009 Framed-IP-Netmask: 255.255.255.255
    (not sure about) 022 Framed-Route: 0.0.0.0
    025 Class: <Group-Policy of ASA>
    does anyone of you know, what I'm making wrong?
    on The ASA I can't find any settings.
    Thanks for any advice

    O'Brien Simon
    Did you manage to get a reply to your question about the timeout period for dynamic users in ACS 4.2 ?  As this is what I was about to ask but noticed your post.
    Many thanks
    florrieford

  • ACS 3.3 Send Radius Attribute 135 & 136

    Hi
    I need an ACS box to return IETF RADIUS attributes 135 & 136 to a NAS for the assignment of DNS servers to clients.
    The ACS 3.3 user guide lists these as supported IETF RADIUS Attributes however they don't seem to be available under Interface Configuration--> Radius IETF.
    Would anyone know how I can enable these ?
    Thanks
    Leon

    Hi Leon,
    That is quite strange. You should have those attributes.
    As you mentioned you have ACS SE, if you could console into it. Issue command,
    stop csadmin
    start csadmin
    Or rebooting ACS SE will re-start the CSAdmin server.
    If you are restarting services from, System Configuration > Service Control, then that wont restart the CSAdmin service.
    Give that a try.
    Regards,
    Prem

  • [Cisco ACS] 11036 The Message-Authenticator RADIUS attribute is invalid

    Hi,
    I got many Cisco AP which are linked to 2 Cisco WLC.
    On each WLC, I configured a primary and a secondary RADIUS Server.
    RADIUS servers are Cisco ACS 5.2.0.26 (patch 10)
    Primary and secondary ACS configurations are synchronized.
    There are no problem between primary WLC and Cisco ACS (primary and secondary).
    When secondary WLC requests primary Cisco ACS, I get this error "11036 The Message-Authenticator RADIUS attribute is invalid"
    Secondary WLC automatically contacts secondary Cisco ACS and it works fine.
    Cisco ACS description for this error: "This maybe because of mismatched Shared Secrets."
    The two Cisco ACS are synchronized so I should have same error on them...
    Why does primary ACS generate this error?
    Thanks for your help,
    Patrick

    Tarik Admani wrote:Amjad,That is a good observation, shouldnt 7.3 (which recently released) help put these types of issues to rest? I hear that the configuration can now be replicated from one controller to the next in a failover setup.Thanks,Tarik Admani
    *Please rate helpful posts*
    Yes. That is a good point.
    With 7.3 you can use high availability (HA) between two WLCs and you can configure only one WLC (the primary) and all the configuraiotn can be replicated and synched to the other WLC (the secondary).
    The two WLCs in the HA must be on same subnet though. Otherwise hot-standby HA between WLCs can't be used.
    Rating useful replies is more useful than saying "Thank you"

  • Add RADIUS attributes under "Group Setup" in ACS 4.2

    Hi Security Experts,
    I need to add RADIUS attributes for a custom vendor under "Group Setup" page in ACS 4.2. As of now, I see Cisco Aironet RADIUS Attributes,
    IETF RADIUS Attributes etc in "Group Setup" page. How can I make sure that the RADIUS attributes for a vendor also appear on that page?
    PS: I rate useful posts
    Thanks,
    Kashish

    Under "Interface" you can enable which RADIUS-Attributes you want to display. Probably there's just one checkmark missing for your vendor.
    The Options for RADIUS are described here:
    http://www.cisco.com/en/US/partner/docs/net_mgmt/cisco_secure_access_control_server_for_windows/4.2/user/guide/A_RADAtr.html

  • ACS 4.2 - add RADIUS Attributs

    Hello,
    I want to add Radius attribut to Radware devices , so I will have the option to grant "read only" permission to users.
    as I understand I need to add VSA for the "read only" permission, or configure specific "Service-Type value 255"
    in the following picture you can see the required information from Radware:
    Thanks

    anyone know of that?
    Thanks

Maybe you are looking for