ACS autherization for 3rd party device

Hi all,
I am trying to set up AAA authentication and autherization for nortel passport through ACS 4.2 server.
i am sucessful in getting authentication through RADIUS but need to control autherization of nortel passport through ACS.. Can anyone suggest how to do it. I have mentioned few command of nortel...
Hardware - Nortel passport 7480 / Nortel Multiservice Switch
7480
Software - PCR 9.1
Commands -
1) d -p vr/* pp/* ipp log/*
2) ping -ip(10.2.1.14) vr/2 ip icmp
3) d -p sig/*
4) d sig/*
5) d -p vsr/*
6) d -p vroute/*
Need help...
Regards
Amar

Hi all,
I am trying to set up AAA authentication and autherization for nortel passport through ACS 4.2 server.
i
am sucessful in getting authentication through RADIUS but need to
control autherization of nortel passport through ACS.. Can anyone
suggest how to do it. I have mentioned few command of nortel...
Hardware - Nortel passport 7480 / Nortel Multiservice Switch
7480
Software - PCR 9.1
Commands -
1) d -p vr/* pp/* ipp log/*
2) ping -ip(10.2.1.14) vr/2 ip icmp
3) d -p sig/*
4) d sig/*
5) d -p vsr/*
6) d -p vroute/*
Need help...
Regards
Amar
Hi Amar,
Check out the below link for radious authorization confguration on ACS
http://www.ciscosystems.com/en/US/docs/net_mgmt/cisco_secure_access_control_server_for_windows/4.0/user/guide/c.html#wpxref31687
Hope to Help !!
Ganesh.H

Similar Messages

Alarms for Third party devices on Cisco PI v 2.1

Is it possible to receive alarms for third party devices in Cisco Prime Infrastructure 2.1? If so how do i configure PI to show the alarms?

Hi,
AFAIk, It is not possible to receive alarms for third party devices in Cisco Prime Infrastructure 2.1.
we have very limited support of 3rd party devices in PI. third party devices only snmp polling, snmp traps and syslog will work
Third-party support
● Ability to discover and monitor third-party (non-Cisco) switches that support RFC 1213 and wireless controllers/access points from Aruba Networks
Thanks-
Afroz
****Ratings Encourages Contributors ****

Use of files dowloaded from i-tunes store on Roku (3rd party device)

Hello,
I have a Roku soundbridge system which play my music from my Mac compute r(via wifi). Unfortunaley it does not succeed to play the files bought on i-tunes store as it says they are protected. How can i take out the protection or have it read by my system. On roku site, i only find "apple does not allow streaming of files downloaded from their music store to 3rd party device." Is there any solution for me to listen to the albums i have bought on my system??? thks for your help

Sorry, but as Roku's web site says, no third-party devices can play tracks purchased from the iTunes Store. Tracks from the iTunes Store can only be played in iTunes or QuickTime Player or on an iPod, Apple TV, iPhone or iTunes-equipped Motorola cell phone.

PI2.1 3rd Party devices

Hi,
I have recently installed a HA pair of PI2.1 NCS appliances and so far so good.
I have a number of 3rd party device that I would like to add.
I have uploaded the specific MIB's for these devices and created Custom SNMP templates to use to monitor them. These templates have been deployed via "Monitoring Deployment" on the 3rd party devices.
The question I have is where can I now see the detail that PI is retrieving when it SNMP polls these 3rd party devices using the custom template.
I would have thought it would be visible in the Device Work Centre when you click on a device, like it is with the Cisco ones but nothing else is showing except for the usual IP address, product family etc information.
Any ideas ?
cheers
Rich

Changing the local ssh client to v2,1 doesnt work.
You need to change /etc/ssh/ssh_config
# Protocol 2,1
>>> comment out
not the sshd_config, this will change the SSH-access to the PI-server self.
In our case we extended the vty input to telnet for the few older ssh1 only image devices
Steffen

ATP for 'Stock in transit' for 3rd Party scenario

We have a scenario:
For warehouse replenishments an STO is created and then a delivery is subsequently created for the STO. Once the delivery has been shipped out of the manufacturing facility (post goods issued) the materials on the delivery are transferred from unrestricted-stock at the manufacturing facility to stock-in-transit at the receiving warehouse. Once the stock is in transit to the third-party warehouses, ATP should then take it into consideration when deliveries are created from the third-party warehouses to customers.
Now how to take the ATP check for 3rd party del. into consideration for STO?
STO document type is UD
Goods issue movement type is 641
Goods receipt movement type is 101

Some useful info here..
http://help.sap.com/saphelp_47x200/helpdata/en/2b/b22d3b1daca008e10000000a114084/frameset.htm

BRFPlus - license with NW fundation for 3rd party - SAP PO applies ?

Hi,
I got the impression that in order to use BRFPlus we need to have SAP NW fundation license for 3rd party,
does anyone know, if we have SAP PO (process orchestration) which has a restricted SAP NW fundation license for 3rd party
(to be used only with BPM, PI and BRM), can we use BRFPlus from PI ?
Thank you for any comments,
Regards,
Michal Krawczyk

Hi Michal,
no idea about the licensing question, but I think you need an additional license due to the Java stack, but this has to be answered by an expert of SAP.
Concerning the usage of BRFplus from PI: The only way I know to use the BRFplus functions from PI is via webservices generated out of the functions.
The other way round is a little more comfortable as you can use the BRMS Connector expression.
BR
Christian

Procedure for 3rd Party

Dear Experts,
We have some 3rd party vendor from where we purchase FG. And the transaction is like that we give PO to 3rd party. They pack the material as per our BOM provide in mail. Then they supply the material at our stock point and our stock point do the GRN. but in this case we are unable to track the BOM of some products as no production order or SAP activity is done at third end. So kindly confirm me how we should maintain the BOM for 3rd party without plant code generation,
Or else suggest me how to do this transaction in the best way so that at any time we can be able to trace that so as so batches was packed in so and so packing material.
Regards,
Phalgun Patel

Phalgun,
It is unclear to me why you need to 'plan' a BOM for the Vendor. In standard 3rd party processing, all you do is place a PO with the vendor, and the Vendor delivers the product directly to your customer. Batch numbers used are created by the vendor, according to the terms of your contract. You are unconcerned how he internally plans his order, and he never actually sends his output to you. He is solely responsible for procuring any RM or services required to fill your PO, and for fulfilling any batching and traceability requirements contained in the contract. Any Doc you send to him about BOM is not for you to use for planning purposes, it is part of the contract specifications.
So, can you be a little more specific exactly why the vendor is delivering material to you, and why you need a BOM.
Best Regards,
DB49

Code Signing for 3rd Party DLLs in MPR certfication

Dear Team,
I am currently performing MPR test with my Web Application using Windows Server 2012 R2 platform.
While verifiying test results, i got failed in the validating digital signature for 3rd party binaries(DLL).
The DLLs are Ajaxcontroltoolkit.dll, interop.Excel.dll etc.,
Whether Signed DLLs are exists for Ajax Libraries?? If Signed DLLs exists for Ajax Libraries, is it advisable to request Microsoft support team for getting Signed DLL through mail? (or)
Can i include this point as a waiver in document during test results submission??
Regarding Interop DLL's is it advisable to include DLL's in waiver request document??
Kindly review and suggest comments

Hello,
When an MPR Test fails due only to 3rd party binaries, please create a Test Results Package, upload to MPR site, complete and send a waiver for review.
List all failing binaries in the waiver, grouping by their respective owner.
Thank you,

Wht is Process Flow for 3rd Party Sales

wht is Process Flow for 3rd Party Sales

Customize the third party sales in summary:
1. Create Vendor XK01
2. Create Material u2013 Material Type as "Trading Goods". Item category group as "BANS".
3. Assign Item Category TAS to Order type that you are going to use.
4. A sale order is created and when saved a PR is generated at the background
5. With reference to SO a PO is created (ME21N). The company raises PO to the vendor.
6. Vendor delivers the goods and raises bill to company. MM receives the invoice MIRO
7. Goods receipt MIGO
8. Goods issue
9. The item cat TAS or Schedule line cat CS is not relevant for delivery which is evident from the config and,   therefore, there is no delivery process attached in the whole process of Third party sales.
10. Billing      *-- Seema Dhar
SD - 3rd party sales order Create Sales Order
VA01
      Order Type
      Sales org, distr chnl, div
      Enter
      Sold to
      PO #
      Material
      Quantity
      Enter
      Save
SD - 3rd party sales order View the PR that is created with a third party sales order
VA01
      Order Number
      Goto Item Overview
      Item ->Schedule Item
SD - 3rd party sales order View the PR that is created
ME52N
      Key in the PR number
      Save
SD - 3rd party sales order Assign the PR to the vendor and create PO
ME57
      Key in the PR number
      Toggle the "Assigned Purchase Requisition"
      Execute
      Check the box next to the material
      Assign Automatically button
      Click on "Assignments" button
      Click on "Process assignment"
      The "Process Assignment Create PO" box , enter
      Drag the PR and drop in the shopping basket
      Save
SD - 3rd party sales order Receive Goods
MIGO_GR
      PO Number
      DN Number
      Batch tab , click on classification
      Serial Numbers tab
      Date of Production
      Flag Item OK
      Check, just in case
      Post
      Save
SD - 3rd party sales order Create Invoice
MIRO
      Invoice Date
      Look for the PO , state the vendor and the Material
      Check the box
      Clilck on "Copy"
      Purchase Order Number (bottom half of the screen)
      Amount
      State the baseline date
      Simulate & Post
      Invoice Number
      *Invoice blocked due to date variance
SD - 3rd party sales order Create a delivery order
VL01N
      In the order screen , go to the menu Sales Document , select "Deliver"
      Go to "picking" tab
      State the qty and save
SD - 3rd party sales order Create a billing document
VF01
      Ensure that the delivery document is correct in the
      Enter
      Go to edit -> Log
      Save

End to End Monitoring confiuguration for 3rd party systems

Hi,
I have been trying to racking up materials for end-end configurations for 3rd party systems and can't find any..All the ABAP systems are perfectly configured in our End-End Monitoring system but can't find any of the third party systems..Is there a seperate method to configure 3rd party systems?
-Teresa

Hi Teresa,
You can't include 'Third Party' systems in end-to-end monitoring. We had raised a SAP note for the same and below is SAP response..
"End-to-end monitoring stands for the functionality included as of 6.40 that enables you to track XI messages accross several systems. This functionality can be configured for all components that are able
to contribute information to this process monitoring, i.e. only SAP systems can be configuered."
Also check this from online help..
"The Runtime Workbench receives the data for end-to-end monitoring from the Process Monitoring Infrastructure (PMI), which is an SAP monitoring tool for monitoring end-to-end technical processes involving multiple SAP components."
http://help.sap.com/saphelp_nw04/helpdata/en/82/9e8dfe9eadbd4b9194c433e646b84e/content.htm
Regards
Anand

Moving average update for 3rd Party sales order

Hello All,
We have configured a 3rd party sales order process. The schedule line category is configured with account assignment categoory as "M". when we are creating GR the Moving average price of the material is not getting updated.
But if i replace with "E" it is getting updated, but the CO-PA is not getting generated for Profitability segment reporting.--we need profitability segment reportng.
Can some one tell me how we can update the moving average price using acc. asssignment category type "M" at the same time the Profitability segement information is updated.
THanks in advance
Appreciate your help
Arpita Rani

Hello Arpita
For 3rd party orders functionality you need to use account assignment category of X and not M. E and M are for individual Purchase orders. You should not use them for 3rd party.
Please see the following OSS notes and follow along:
210997 - Accnt assignment categories in third-party and indiv.PO
550388 - FAQ: Customizing of third-party and individual POs
Good luck.

1)    Is there North Bound Interface / API from SAP Solution Manager available for 3rd party integration?       i. The list of the modules that are being managed by SAP Solution Manager(s)      ii. The performance metrics of those modules/components at th

1)
Is there North Bound Interface / API from SAP Solution Manager available for 3rd party integration?
i. The list of the modules that are being managed by SAP Solution Manager(s)
ii. The performance metrics of those modules/components at the high level
iii. The information about Early Watch Alerts (or situations to watch for)
2)
Is there a full SNMP interface for getting the above information from SAP Solution Manager?
3)
Is that understanding that SAP has SNMP support for forwarding alerts to a 3rd party system, correct?
4)
Does SAP has both free and licensed? If yes then what are the advantages of licensed over the open/free version?

Mugunthan
Yes we have applied 11i.AZ.H.2. I am getting several errors still that we trying to resolve
One of them is
===========>>>
Uploading snapshot to central instance failed, with 3 different messages
Error: An invalid status '-1' was passed to fnd_concurrent.set_completion_status. The valid statuses are: 'NORMAL', 'WARNING', 'ERROR'FND     at oracle.apps.az.r12.util.XmlTransmorpher.<init>(XmlTransmorpher.java:301)
     at oracle.apps.az.r12.extractor.cpserver.APIExtractor.insertGenericSelectionSet(APIExtractor.java:231)
please assist.
regards
girish

I am attempting to update students' iPads using the Apple Configurator software. However, information for 3rd party apps, like Notability and Explain Everything, is being lost.

I am attempting to update students' iPads using the Apple Configurator software. However, information for 3rd party apps, like Notability and Explain Everything, is being lost.

Mike,
If by "still nothing" you mean they are not showing up in the AU manager after reinstalling them....
Im guessing the AU Cache itself is now corrupted so.....
Quit LPX
Open Finder
Press the option key and click "Go" in Finder's menu and select "Library". (This is the User Library and not the System Library and is normally hidden which is why you have to hold down the option key when clicking on Go.... to reveal it in the drop down menu that will appear)
Go to "Caches" dir and remove "AudioUnitCache" dir.
Now Restart your Mac.....
and then Launch LPX and let it rescan your plugins and see if that fixes things....
Fingers crossed...
Nigel

3rd party device support

Hi,
Is there going to be any change in the way MARS would support 3rd party devices (non-cisco) like checkpoint, Intrushield etc in future?
Thanks in advance,
Valsa Raj

1. Discovery supports many non-CDP modules such as ping sweeps, ARP cache lookups, and routing table lookups. However, Topology Services still requires CDP to build interconnections between devices.
2. Yes, non-Cisco devices will show up on the Topology Map with a generic icon.
3. There is no restriction except it has a maximum of 50 devices.
4. The Fault component of LMS 4.0 can integrate with HPOV NNM.

My bank (Chase) and my wife's payroll provider (ADP) say I can longer pull our statements because of incompatibilities between Adobe Reader and Safari. The Apple site says it is not responsible for for 3rd party software. Adobe says go back to Safari 5.0.

My bank (Chase) and my wife's payroll provider (ADP) say I can no longer pull our statements because of incompatibilities between Adobe Reader and Safari. The Apple site says it is not responsible for for 3rd party software. Adobe says go back to Safari 5.0. Apple dosen't let me download Safari 5.0; so what do I do. The bank had me download Chrome, and I can now download my statements. but what a pain. Any suggestios?

Back up all data.
Quit Safari. In the Finder, select Go ▹ Go to Folder... from the menu bar, or press the key combination shift-command-G. Copy the line of text below into the box that opens, and press return:
/Library/Internet Plug-ins
From the folder that opens, remove any items that have the letters “PDF” in the name. You may be prompted for your login password. Then launch Safari and test.
If you still have the issue, repeat with this line:
~/Library/Internet Plug-ins
If you don’t like the results of this procedure, restore the items from the backup you made before you started. Relaunch Safari again.

ACS autherization for 3rd party device

Similar Messages

Maybe you are looking for