ACS Certificate import failure

Hello All,
trying to get a certificate imported on an ACS collector. The import (apparently) fails with this:
>> 1 certificates found for server authentication usage.
>> Enter the number of the certificate you want AdtServer to use for authenticating
>> to AdtAgent or 0 to quit without saving: 1
>> Certificate 1 selected. Attempting to save thumbprint to registry ...
>> failure.
No errors, no messages, no event logs - no nada. I'm not even sure the import actually failed (how to verify ??).
Anyone happen to have an idea on how to troubleshoot this? I tried tracing registry access with Sysinternals ProcMon, but nothing interesting really stood out.
Thx in advance for help and/or pointers!
Rgds - M.

Hi,
here you can find more information how to configure certificates for ACS forwarders and collectors:
How to configure Audit Collection System (ACS) to use Certificate based authentication,
How to Configure Certficates for ACS Collector and Forwarder
Regards,
Ivan

Similar Messages

ASA certificate import failure

I'm stumped by an issue I'm having trying to upload the SSL certificate we just renewed.
Importing the old [expired] .pfx in ASDM works flawlessly. Trying to do the same with the new [renewed] certificate returns 'PKCS12 Import Operation Failed'
I'm pretty much out of ideas, any insight would be hugely appreciated.
Any more information you need, just ask. Thanks

Your issuing CA may have updated the root certificate (or intermediate cert) they use to sign their issued certs. I'd check for that an re-import them if that's the case. That will ensure a chain to the root.

EAP_TLS not successful, getting X509 decrypt error - certificate signature failure

Hi
I am trying EAP-TLS authentication on ACS 5.1.
I have placed the Root CA of the device certitifcate on ACS.
But getting this error.
OpenSSLErrorMessage=SSL alert
code=0x233=563 ; source=local ; type=fatal ; message="X509 decrypt error - certificate signature failure"
OpenSSLErrorStack= 3055889312:error:140890B2:SSL routines:SSL3_GET_CLIENT_CERTIFICATE:no certificate returned:s3_srvr.c:2649
Can anyone help in debugging the issue, is it problem with Device's root CA certificate or anything else
Thanks

Hi Smita,
Similar post but with ISE:
https://supportforums.cisco.com/thread/2135392
Are we using SHA 2 certs anywhere here?
http://www.cisco.com/en/US/docs/net_mgmt/cisco_secure_access_control_system/5.2/release/notes/acs_52_rn.html#wp157364
ACS 5.2 supports SHA 256.
Rate if useful

ORA-29024: Certificate validation failure when trying to redirect to https

Hi, I was trying to redirect the page to another https website using utl_http.request,
I configured Oracle wallet and import the certificate, and successfully to get the webpage content in sqlplus by
select utl_http.request('https://<website>,null,<wallet>,<wallet password>) from dual,
but when I trying to use the same way in a button process of Apex, the error ORA-29024: Certificate validation failure prompt.
Anyone know what wrong with it?
Thanks
Vincent Pek

Hi, Sorry, I found that after i reboot my laptop , it's working now.

Premiere Elements 9 PC: Major Importer Failure

I think that I have gone down every troubleshooting road on trying to discover why "all of a sudden" Premiere Elements 9 PC will not import anything via Get Media/Files and Folders into its Organize interface as is its default behavior. The program fails at that point and shows the message "the program is not responding". Yet if you force the closure of that particular project and reopen a new one, you find that those media that failed to import into Organize in the first project now are live and well in the Organize of the new project. You can drag them from the Organize to the Timeline and use them in this new project. All other functions of Premiere Elements 9 PC appear unaffected by this import failure. AND, source media can be video (any format and size) and photos (any size). This happens even with import of the first and only file being a jpg (800 x 600 pixels).
My history of Premiere Elements 9 PC/baddrivers.txt file/ and "incompatible driver messages" is well documented in these forums. That involved Windows XP Professional SP3 32 bit and a NVIDIA display card. And, I have been moving along successfully with Premiere Elements 9 PC for several months. About two weeks ago, I upgraded my computer to Windows 7 Professional 64 bit Intel Graphics Card, and Premiere Elements has been performing great until yesterday when what I call "major importer failure" struck. The computer has about 800 GB free hard drive space and about 2.5 GB out of 4.0 GB of available RAM. All of this worked great for about two weeks and now suddenly this yesterday. Did I do anything different or unusual? I think not. I also have Premiere Elements 7 and 8 on this same new computer, and they continue to function perfectly in all respects, whereas Premiere Elements 9 does not. AND, yes I have had the Premiere Elements 9.0.1 Update installed and in use before and after the importer failure.
Troubleshooting has included
a. Uninstall/Reinstall from Premiere Elements 9 installation disc + uninstall/reinstall of QuickTime + Photoshop Elements 9 as well.
b. System Restore (as well as a restore of an earlier version of the installed Premiere Elements 9.
c. Removal of possible interferring program, such as, Nero InCD.
d. Removal of recent Windows Updates
e. Uninstall/reinstall of Intel driver since at one point in the failure the Edit Mode Monitor was displaying part of the Disc Menu Section while the program was in the Organize Mode.
f. Have looked at permissions, running as Administrator, etc.
One of the things that I will try this morning is installing Premiere Elements 9 PC on the previous system Windows XP Professional SP3 32 bit to see if there is any major importer failure there at this time.
If anyone has the time, I would appreciate any comments on a troubleshooting avenue that I may have overlooked. This appears to be another Deja Vu all over again. I hope not.
Thanks.
ATR

Neale
Thank you for your interest in this issue.
I still have not pin pointed why my Premiere Elements 9 works great EXCEPT it will not import media into the Organize with Get Media/Files and Folders and attempts to do that drive the program into unresponsiveness and extreme difficult closure, even with the Task Manager.
Yes, I have already looked at the workaround that you suggested for moving forward in my Premiere Elements 9 PC project, that is, entering all my source media into the Elements Organizer (can do from Photoshop Elements side) so that the source media thumbnail will be in the Premiere Elements Organize "ahead of time", and I will not have to depend upon Get Media/Files and Folders to get that job done.
But, until I hit the key to this, I think I have an almost perfect better way. My computer is now Windows 7 Professional 64 bit that comes with the Windows XP Mode. Essentially what you have in this mode is a virtual Windows XP Professional SP3 32 bit machine (best I can determine, Microsoft Generic Card). I can install Premiere Elements 9 (same serial number as on the Windows 7), and IT WORKS, no problem with the Get Media/Files and Folders. The one glitch in this perfect solution is setting up to burn to DVD. The Windows 7 Windows XP Mode Virtual Machine will not recognize installed internal DVD/CD drives when you go to write a DVD. The explanation is that the optical drive in XP Mode is a virtual device - read only. I have confirmed this. In order to use Premiere Elements 9 PC burn to disc in this Windows XP Mode , my answer here appears to be plugging in an external DVD burner USB and then using the USB Attach of the Windows XP Mode.
When Premiere Elements 9 PC was released, I was forced into much troubleshooting of the display issues which are very widely documented here. But then I was using "a real" Windows XP Professional SP3 32 bit" with a NVIDIA card. In the trial version, the BadDrivers.txt and VideoRenderer.dll got me through that episode. For me, the purchased version "essentially" was not afflicted with these same problems, and it has been running great. Now when I go to a new computer system for better performance/greater computer resources (by the way, Intel HD Graphics card), Premiere Elements 9 runs great for two weeks and then this no Get Media/Files and Folders matter sets in accompanied by program going completely knocked out by the event. In all of this, old or new, I have Premiere Elements 7, 8, and 9 installed on the same computer. While Premiere Elements 9 is being hit with these issues, Premiere Elements 7 and 8 are not , same computer environment, same source media, same project preset, et al. For me, the Premiere Elements 9.0.1 has not hit the mark.
I have done extensive troubleshooting of the this current matter, too long and involved to go into now. I am preparing a full detailed description of the issue and the troubleshooting that went into the search for a fix. I will be posting it at the forum that I frequent. When I post it there, I will supply a link to it for whomever is interested. I have filed a bug report with Adobe on this matter in abridged format as per the space provided in its bug report online form.
Thanks again for posting.
ATR

Solution Import Failure Message: Cannot add a Root Component 'GUID' of type 29 because it is not in the target system

Hi all,
Please refer to the error:
Root Components import: FAILURE
[2015-04-10 17:04:48.126] Process: w3wp |Organization:0937f109-45df-e411-80cf-0050560100db |Thread: 43 |Category: Exception |User: ac011cf7-ad36-405b-91cf-2155ca15efb1 |Level: Error |ReqId: d3924c06-ad4b-4d5e-a204-70f8170016e1 | CrmException..ctor
ilOffset = 0x30
at CrmException..ctor(String formattedErrorMessage, Int32 errorCode, Object[] arguments) ilOffset = 0x30
at ImportRootComponentsHandler.GetSolutionRootsCollection(Boolean throwIfMissing, Boolean skipRibbonCustomization) ilOffset = 0x209
at ImportRootComponentsHandler.ImportItem() ilOffset = 0x8
at ImportHandler.Import() ilOffset = 0x43
at RootImportHandler.ImportAndUpdateProgress(ImportHandler ih) ilOffset = 0x7
at RootImportHandler.HandleNonMetadataHandlers(String[] ImportEntities, ImportHandler& ihForCurrentPath) ilOffset = 0x33
at RootImportHandler.RunImport(String[] ImportEntities) ilOffset = 0x1D8
at ImportXml.RunImport(String[] ImportEntities) ilOffset = 0xE
at ImportXml.RunImport() ilOffset = 0x5BF
at ImportXmlService.ImportSolutionSkipCapable(Boolean overwriteUnmanagedCustomizations, Boolean publishWorkflows, Byte[] customizationFile, Guid importJobId, Boolean convertToManaged, Boolean skipProductUpdateDependencies,
ExecutionContext context) ilOffset = 0x46
at RuntimeMethodHandle.InvokeMethod(Object target, Object[] arguments, Signature sig, Boolean constructor) ilOffset = 0xFFFFFFFF
at RuntimeMethodInfo.UnsafeInvokeInternal(Object obj, Object[] parameters, Object[] arguments) ilOffset = 0x25
at RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture) ilOffset = 0xCF
at LogicalMethodInfo.Invoke(Object target, Object[] values) ilOffset = 0x4F
at InternalOperationPlugin.Execute(IServiceProvider serviceProvider) ilOffset = 0x57
at V5PluginProxyStep.ExecuteInternal(PipelineExecutionContext context) ilOffset = 0x200
at VersionedPluginProxyStepBase.Execute(PipelineExecutionContext context) ilOffset = 0x65
at Pipeline.Execute(PipelineExecutionContext context) ilOffset = 0x65
at MessageProcessor.Execute(PipelineExecutionContext context) ilOffset = 0x1C5
at InternalMessageDispatcher.Execute(PipelineExecutionContext context) ilOffset = 0xE4
at ExternalMessageDispatcher.ExecuteInternal(IInProcessOrganizationServiceFactory serviceFactory, IPlatformMessageDispatcherFactory dispatcherFactory, String messageName, String requestName, Int32 primaryObjectTypeCode,
Int32 secondaryObjectTypeCode, ParameterCollection fields, CorrelationToken correlationToken, CallerOriginToken originToken, UserAuth userAuth, Guid callerId, Guid transactionContextId, Int32 invocationSource, Nullable`1 requestId, Version endpointVersion)
ilOffset = 0x16E
at OrganizationSdkServiceInternal.ExecuteRequest(OrganizationRequest request, CorrelationToken correlationToken, CallerOriginToken callerOriginToken, WebServiceType serviceType, UserAuth userAuth, Guid targetUserId,
OrganizationContext context, Boolean returnResponse, Boolean checkAdminMode) ilOffset = 0x1F1
at OrganizationSdkServiceInternal.ExecuteRequest(OrganizationRequest request, CorrelationToken correlationToken, CallerOriginToken callerOriginToken, WebServiceType serviceType, Boolean checkAdminMode) ilOffset
= 0x2D
at OrganizationSdkServiceInternal.Execute(OrganizationRequest request, CorrelationToken correlationToken, CallerOriginToken callerOriginToken, WebServiceType serviceType, Boolean checkAdminMode) ilOffset = 0x26
at InprocessServiceProxy.ExecuteCore(OrganizationRequest request) ilOffset = 0x34
at PlatformCommand.XrmExecuteInternal() ilOffset = 0xF6
at ImportSolutionCommand.Execute() ilOffset = 0x20
at DataSource.ImportSolution(Byte[] customizationFile, Boolean overwriteUnmanagedCustomizations, Boolean publishWorkflows, Guid importJobId, Boolean convertToManaged, Boolean skipProductUpdateDependencies, IOrganizationContext
context) ilOffset = 0x0
at SolutionImportProcessPage.ImportSolution() ilOffset = 0x123
at SolutionImportProcessPage.ProcessRequestData() ilOffset = 0x4A
at SolutionImportProcessPage.ProcessAction(String action) ilOffset = 0x92
at AppUIPage.OnPreRender(EventArgs e) ilOffset = 0xD
at Control.PreRenderRecursiveInternal() ilOffset = 0x54
at Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) ilOffset = 0x6D3
at Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) ilOffset = 0x3C
at Page.ProcessRequest() ilOffset = 0x14
at Page.ProcessRequest(HttpContext context) ilOffset = 0x33
at CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() ilOffset = 0x18D
at HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) ilOffset = 0x15
at ApplicationStepManager.ResumeSteps(Exception error) ilOffset = 0x10A
at HttpApplication.System.Web.IHttpAsyncHandler.BeginProcessRequest(HttpContext context, AsyncCallback cb, Object extraData) ilOffset = 0x5C
at HttpRuntime.ProcessRequestInternal(HttpWorkerRequest wr) ilOffset = 0x16A
at ISAPIRuntime.ProcessRequest(IntPtr ecb, Int32 iWRType) ilOffset = 0x4B
>Crm Exception: Message: Cannot add a Root Component 0ffbcde4-61c1-4355-aa89-aa1d7b2b8792 of type 29 because it is not in the target system., ErrorCode: -2147188705
[2015-04-10 17:04:48.126] Process: w3wp |Organization:0937f109-45df-e411-80cf-0050560100db |Thread: 43 |Category: Platform.Sql |User: ac011cf7-ad36-405b-91cf-2155ca15efb1 |Level: Info |ReqId: d3924c06-ad4b-4d5e-a204-70f8170016e1 | BusinessProcessObject.ExecuteNonQuery
ilOffset = 0x28
I am getting this coming up in the error log when I attempt to import an unmanaged solution.
After searching on google Type 29 refers to a workflow.
I go into the source system and query the database by the GUID and discover that it is actually a Business Process Flow called 'Phone to Case Process'.
I do not have this process in my target system as I deleted it.
Looks like this is one of the out of the box ones. I don't think we we have changed this one much.
What does this mean and what should I be looking for??
Anyway how do I remove this offending process from the unmanaged solution xml file and attempt to re-import it?
It doesn't look like I can generate the solution again without the offending workflow/process..

I managed to resolve this issue after looking at this thread:
https://social.microsoft.com/Forums/en-US/fddff17f-1cca-4d33-a666-60c08ad76b0c/crm-2011-import-failure?forum=crmdevelopment
Just modify both solution and customizations xml by searching for the guid and removing the root component

.p12 Certificate import in weblogic server 10.3.6.0

Hi,
I am facing a issue regarding certificate import in weblogic server 10.3.6.0. In my project I built a java webservice where a https url is invoked with xml input(correct format).Https url is restricted. I can not open this url from my browser. I got '403 : Forbidden' error in browser as well as webservice log in server. I asked my client. They gave me one .jks and one .p12 certificated file and password. When I installed this .p12 (giving password) in my local windows computer, I am able to open that https in my browser.I have imported this .p12 certificate in 'cacerts' as well as 'DemoTrust.jks' in weblogic server and restarted the server. But i am getting the same error(403 : Forbidden) in weblogic server.
Where should I import this .p12 in weblogic server? I mean in which key store.
FYI,
This code is running fine in 10g production server.I haven't developed this code. I have migrated this code to 11.1.1.7.0.
I am using this .jks() in the java code.
        System.setProperty("javax.net.ssl.keyStore", keyStore.jks);
        System.setProperty("javax.net.ssl.keyStorePassword", "<password>");
Weblogic server is running in unix environment.
Read many posts... But did not any find right solution. Can anybody please help me solve this.

If i remember correctly, .p12 will have both the public and private key.
You need to convert it to a jks and configure the server to use this jks
Converting certificate formats | Middleware wonders!!
Weblogic SSL configuration
Thanks,
Faisal

File Import Failure with Adobe Premiere Elements 11

I've just installed Adobe Premiere Elements 11 on my Windows computer. I have started a video project, saved it and when I tried to re-open it I got this File Import Failure message "This type of file is not supported or the required codec is not installed". What do I do? Thanks for your help!!

I've just installed Adobe Premiere Elements 11 on my Windows computer. I have started a video project, saved it and when I tried to re-open it I got this File Import Failure message "This type of file is not supported or the required codec is not installed". What do I do? Thanks for your help!!

"File Import Failure Unsupported format or damaged file" in CS6 but fine in CS5.5

Hello All.
Recording in Pal DV AVI from Sony Z5U with MRC1K compact flash recorder.
Imported files to computer using the Sony utility, and also tried dragging and dropping.
Some files import to Premiere Pro CS6.03, but others give "File Import Failure: Unsupported format or damaged file,".
The files that do import show up as 4:3 and I have to modify / interpret footage to get them to show as 16:9,
However, these same files play back just fine in Windows Media Player.
Intriguingly these files import just fine to Premiere Pro CS5.5, and also show up correctly as 16:9.
I can't figure out why some files import into CS6 and others don't....
Anyone else seen this kind of behavior?
(Normally I record in HDV and I've never had problems importing from MRC1K into Premiere, but the client specifically requested DV files for their ease of editing...)
Cheers
Mark
PS When I use the DV recoverer utility on these files they import just fine into CS6....

Hi Jim,
OK, here's the video that imports OK into CS6.03 but that Premiere CS6.03 sees as 4:3:
And here's the one that won't import into CS6.03 but is happily opened by CS5.5 and correctly seen as 16:9:
Can you spot the difference? Thanks for having a look at this.
Cheers
Mark

File import failure in premiere pro on specific files

I have installed the latest version of Premiere Pro CC 2014. I am trying to import several video files that i have recorded on a Canon 5D Mark III. The problem is that while some of the files gets successfully imported, many files cant import because of a error message, file import failure. Unsupported file format etc. I have tried to open this in many media players, and all work fine there. I have even imported these files on the same Premiere Pro-version on a different machine, and there they work perfectly. But on this machine some files just wont open. Does anybody have a clue or tips on how I can fix this? I guess its a problem within the software.

It just seems to pick certain files and reject them.
Which ones does it eject? eg do they have a different file extension from the video files.
Are they rgb?

Quicktime file import failure in CS5 After Effects and PPro

Running a Dell PC with a fresh install of Win 7 Pro, Intel Quad Core 2 with 4GB. Ram.When I try to import quicktime files into AE or PPro, I get a file import failure or corrupted file message. I am using quicktime version 7.6.6. I have tried uninstalling and removing all preferences, then reloading older versions of quicktime (7.2) rebboting the machine, and still no luck. Any tips would be appreciated. I have not been able to get any help from Adobe. I have a laptop setup the same way and it works great. I even tried loading the exact same versions of qt. and tried to use the Importerquiktime.prm file from that machine.

I appreciate the feedback. I checked the processes upon AE start and found that the Adobe QT server32 starts then closes in the processes before AE actually loads up. If it is supposed to remain open, it does not. I can not find where to change its permissions. I looked the site you sent a link to, but do not see that section.

Media offline / file import failure

Hi,
I have my project created in Premiere CS6. Now i updated to CC.
In my project, i imported a really short AE file into my Pr timeline. The whole vidieo worked fine.
Now I just noticed that media (AE file) was reported media offline in Premiere CC.
OK, I tried to locate the media from the folder where i keep the file.
Can locate the file but hitting "ok" button won't let me select the file.
Ok, I treid to rename the AE file. Imported the file in Pr, but Pr says file import failure.
Anyone come across this problem.
Not sure if this's because of version CC. My AE file is there. Nothing has changed.
Just don't know why I can't relocate and import the file.

HI abhishah,
Thanks for posting on adobe forums;
Please provide me following details
Premiere pro CC or CS6
What is the OS and version ?
What is the Graphics Card installed on the system ?
How much Ram do you have ?
Do you use any external Hard Drive ?
and please try to copy the media file from the one location another without media, and make the media offline and save the project as a new project and try to open the new one, then try to link the media.
Thanks
Sandeep

Mxf File import failure

Dear All,
I have a problem to import files in CS4 from a Sony PDW-U1(MPEG2 HD 50CBR_1920_1080_422P@HL" formatFps="50i") on my new HP Quad Core 4600.
The error message: file import failure "Unsupported format or damaged file" but is not damaged.
The PC don't have a capture card and I don't need it, I just want to import the mxf and edit it on the timeline then encode in flv.
Someone have an idea?
Many thanks
Claudio

MainConcept sells a fairly expensive PP plugin that supposedly will read the Sony XDCAM HD 422 50 mbps MXF files. I downloaded the demo, but I could never get it to work right, because according the MainConcept, it won't install correctly if you have both CS3 and CS4 components installed. Maybe your luck will be better:
http://www.mainconcept.com/site/prosumer-products-4/xdcam-22351/information-22391.html

File Import Failure

I just tried to open a video I have been working on in Adobe Premiere Elements 11 editing software and I got an error message saying "File Import Failure. The type of file is not supported or the required codec is not installed." How do I fix this so I can get access to my file again? Thanks!!

Do you get the "Missing CODEC, or file not supported" error message upon Import?
If so, this FAQ Entry might be helpufl" http://forums.adobe.com/thread/1050730?tstart=0
Good luck,
Hunt

5.1 WAV Import Failure

If I try to import a 5.1 Wav file into Premiere CS6 which was exported by Audition CS6, I get an Import Failure Error:
The file will also not play in Windows Media Player. Does this work for anyone else?
Terry

Hey Bill,
It's a 5.1 .wav file and although I pasted a screenshot of the error in my post, apparently those don't get through. Premiere's message was that it has a header error. Nothing more useful than that.
Terry
Sent from my iPad

ACS Certificate import failure

Similar Messages

Maybe you are looking for