ACS database connectivity

Dear Sir
I have planned to connect my ACS server to external database (oracle 10g) in order to perform this case would you please let me know how I would be able to connect ACS to oracle. It is considerable to say that I have read some Cisco document about this case but still there is some problem. I would be happy if you let me know your comment.
With best regards
Hamed yazdi

Dear Sir
Billion thanks for your kind reply. Whatever you have mentioned I did, and at the moment my ACS server can connect to my Oracle server but there is another question which I want to create a table which conation username and password of those who want connect to the network via ACS but I do not know which name I should assign to the table and where I should defined to ACS which check the username and password. In other word how should I define to ASC that which table it should check in order to recognise the users has permission or no. I would be happy if you let me know your comment.
With best regards
Hamed yazdi

Similar Messages

  • ACS database reporting permissions issue

    Hi,
    I have an issue with my testing of the ACS reporting in two test environments (SCOM 2012 SP1). One has SQL installed on the same server as the MS and the other is a separate SQL install on its own server with multiple MS’s. On both SQL servers
    the ACS database is running on the same server as the other SCOM databases under an instance called SCOM. When we go live the intention is to run on a separate SQL server so not sure if this would still be relevant at that point.
    First off all my normal reports are running fine from the console and from SQL reporting services. My understanding is that the reports are running under different contexts at this point – the web reporting with the account I am logged in
    with and from within SCOM console trying to use the data reader account.
     When trying from the web reporting services or SCOM console I get -
    “An error has occurred during report processing. (rsProcessingAborted)
    Cannot create a connection to data source 'dataSource1'. (rsErrorOpeningConnection)
    A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote
    connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)”
    With regard to the account I am using for the web reporting. It’s a domain admin account. However what I also did was create a global security group called “SCOMACS” and gave this group “db_datareader” permissions within SQL.
    I also gave the data reader service account permissions to see if this fixed the issue from the console.
    Wonder if anyone could help?

    Hi,
    This seems more like a SQL issue, please make sure your database engine is configured to accept remote connections
    • Start > All Programs > SQL Server 2005 > Configuration Tools > SQL Server Surface Area Configuration • Click on Surface Area Configuration for Services and Connections • Select the instance that is having a problem > Database Engine >
    Remote Connections • Enable local and remote connections • Restart instance 
    Please go through the below blog to troubleshoot this issue:
    Named Pipes Provider, error: 40 - Could not open a connection to SQL Server
    http://blogs.msdn.com/b/sql_protocols/archive/2007/03/31/named-pipes-provider-error-40-could-not-open-a-connection-to-sql-server.aspx
    SQL SERVER – FIX : ERROR : (provider: Named Pipes Provider, error: 40 – Could not open a connection to SQL Server) (Microsoft SQL Server, Error: )http://blog.sqlauthority.com/2009/05/21/sql-server-fix-error-provider-named-pipes-provider-error-40-could-not-open-a-connection-to-sql-server-microsoft-sql-server-error/
    Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
    Hope this helps.
    Regards,
    Yan Li
    Regards, Yan Li

  • ACS Database Replication over VPN with overlapping Network Addresses

    We currently have two co-locations each situated in different provinces. We have two ACS servers which we want to deploy at each co-location. All our network equipments are behind PIX/ASA devices. Getting them to replicate over the VPN should be easy but in our case we have overlapping Network Addresses at both ends of the tunnels.
    As per Cisco data does not transit a NAT device when the two Cisco Secure ACS servers communicate and a successful database replication can occur only if the secondary ACS server perceives no change in the IP header or content of the data it receives. So that means we will not be able to Implement NAT to achiever this.
    Has any one of you faced this problem of replicating ACS Database over the VPN with overlapping Network Addresses and was anyone able to successfully solve this issue using a work around ?
    All provided info and comments are greatly appreciated.

    I can help with the 3005 setup if you decide to go that route.
    You will need to add 2 network list entries under Configuration>Policy Management>Traffic Management>Network Lists.
    You will need to configure a local and remote address. The local will be one of the public ip's for the site.(Provided by your ISP)The remote will be the device you are connecting to on the other end.
    You will also need to add a Nat Lan to Lan rule under Configuration>Policy Management>Traffic Management>Nat>Lan to Lan.
    Use a static Nat type. The rest will look similar to my example.
    Source(Local address)Translated(Public Ip Address used in the network local list)Remote(Ip address of the device on the other end)
    Now just create an Ipsec lan to lan tunnel. You will need to agree with the ISP on des type and auth type. Use you local and remote networks you created earlier.

  • RME Database Connection Error

    Hi All,
    Had the CiscoWorks server crash over the weekend, someone kicked the power cable out of the server. And am now seeing a problem with the RME Database.
    When ever I try and connect to any pages that displays data from the database i get the following error:
    HOME0002: Could not get database connection. Make sure that RME DB server is running. Check RMEHome.log for more details.
    I have also noticed that I am no longer able to view device details through "devcie centre". I can see the "groups" the devices would belong to but not the devices under, when I expand "All Devices" there is nothing. Hopwever when I look at the discovery log I can see all my devices being discovered.
    Any help would be greatly apprectaed.
    Its LMS 3.0.1 on Win 2K3
    Thanks
    Jason

    Everything points to a problem with the ACS integration, and not the database. Assuming you're using HTTP for the ACS protocol, it would be really helpful to see a sniffer trace of TCP traffic between LMS and ACS when you get this error.
    If you are using HTTPS, then you should open a TAC service request to get the steps to enable ACS integration debugging.

  • Installation problem with NW'04 SR1: database connection failed

    Hi all,
    while installing NW '04 SR1 on Windows Server 2003 SP1 and MS SQL Server 2000 SP4 I ran into an error related to the database connection. While performing the step "Load Java Database content" SAPinst crashes with the message
    com.sap.sql.log.OpenSQLException: Could not load class com.ddtek.jdbc.sqlserver.SQLServerDriver.
    The connection to the SLQ Server with e.g. the Query Analyzer is OK. I had a problem with this installation setup before (have a look at the corresponding <a href="https://forums.sdn.sap.com/thread.jspa?threadID=338638&tstart=0">thread</a> ), the JDBC drivers where missing on the installation master but after copying them in the right direction the installation went on with no problem up to this point...
    Has anybody an idea what could have happened here? Is this maybe a problem connected to the one I recently had
    Below I attached the sapinst.log and jload.log with more detailed messages.
    sapinst.log ###########
    INFO 2007-03-12 22:06:24
    Working directory changed to C:\PROGRA1\SAPINS1\NW04SR1\WEBAS_~1\ONE_HOST.
    INFO 2007-03-12 22:06:24
    Output of D:\Java/bin/java.exe '-classpath' './sharedlib/antlr.jar;./sharedlib/exception.jar;./sharedlib/jddi.jar;./sharedlib/jload.jar;./sharedlib/logging.jar;./sharedlib/offlineconfiguration.jar;./sharedlib/opensqlsta.jar;./sharedlib/tc_sec_secstorefs.jar;D:\usr\sap/WPT/JC10/j2ee\jdbc\base.jar;D:\usr\sap/WPT/JC10/j2ee\jdbc\util.jar;D:\usr\sap/WPT/JC10/j2ee\jdbc\sqlserver.jar;D:\usr\sap/WPT/JC10/j2ee\jdbc\spy.jar;D:/usr/sap/WPT/SYS/global/security/lib/tools/iaik_jce_export.jar;D:/usr/sap/WPT/SYS/global/security/lib/tools/iaik_jsse.jar;D:/usr/sap/WPT/SYS/global/security/lib/tools/iaik_smime.jar;D:/usr/sap/WPT/SYS/global/security/lib/tools/iaik_ssl.jar;D:/usr/sap/WPT/SYS/global/security/lib/tools/w3c_http.jar' '-showversion' '-Xmx512m' 'com.sap.inst.jload.Jload' '-sec' 'WPT,jdbc/pool/WPT,D:\usr\sap\WPT\SYS\global/security/data/SecStore.properties,D:\usr\sap\WPT\SYS\global/security/data/SecStore.key' '-dataDir' 'S:/D51030724\J2EE_OSINDEP\J2EE-ENG/JDMP' '-job' 'C:\PROGRA1\SAPINS1\NW04SR1\WEBAS_1\ONE_HOST/IMPORT.XML' '-log' 'C:\PROGRA1\SAPINS1\NW04SR1\WEBAS_1\ONE_HOST/jload.log' is written to the logfile C:\PROGRA1\SAPINS1\NW04SR1\WEBAS_~1\ONE_HOST/jload.java.log.
    WARNING 2007-03-12 22:06:26
    Execution of the command "D:\Java/bin/java.exe '-classpath' './sharedlib/antlr.jar;./sharedlib/exception.jar;./sharedlib/jddi.jar;./sharedlib/jload.jar;./sharedlib/logging.jar;./sharedlib/offlineconfiguration.jar;./sharedlib/opensqlsta.jar;./sharedlib/tc_sec_secstorefs.jar;D:\usr\sap/WPT/JC10/j2ee\jdbc\base.jar;D:\usr\sap/WPT/JC10/j2ee\jdbc\util.jar;D:\usr\sap/WPT/JC10/j2ee\jdbc\sqlserver.jar;D:\usr\sap/WPT/JC10/j2ee\jdbc\spy.jar;D:/usr/sap/WPT/SYS/global/security/lib/tools/iaik_jce_export.jar;D:/usr/sap/WPT/SYS/global/security/lib/tools/iaik_jsse.jar;D:/usr/sap/WPT/SYS/global/security/lib/tools/iaik_smime.jar;D:/usr/sap/WPT/SYS/global/security/lib/tools/iaik_ssl.jar;D:/usr/sap/WPT/SYS/global/security/lib/tools/w3c_http.jar' '-showversion' '-Xmx512m' 'com.sap.inst.jload.Jload' '-sec' 'WPT,jdbc/pool/WPT,D:\usr\sap\WPT\SYS\global/security/data/SecStore.properties,D:\usr\sap\WPT\SYS\global/security/data/SecStore.key' '-dataDir' 'S:/D51030724\J2EE_OSINDEP\J2EE-ENG/JDMP' '-job' 'C:\PROGRA1\SAPINS1\NW04SR1\WEBAS_1\ONE_HOST/IMPORT.XML' '-log' 'C:\PROGRA1\SAPINS1\NW04SR1\WEBAS_1\ONE_HOST/jload.log'" finished with return code 1. Output:
    java version "1.4.2_13"
    Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2_13-b06)
    Java HotSpot(TM) Client VM (build 1.4.2_13-b06, mixed mode)
    12.03.2007 22:06:25 com.sap.inst.jload.Jload main
    INFO: Jload -sec WPT,jdbc/pool/WPT,D:\usr\sap\WPT\SYS\global/security/data/SecStore.properties,D:\usr\sap\WPT\SYS\global/security/data/SecStore.key -dataDir S:/D51030724\J2EE_OSINDEP\J2EE-ENG/JDMP -job C:\PROGRA1\SAPINS1\NW04SR1\WEBAS_1\ONE_HOST/IMPORT.XML -log C:\PROGRA1\SAPINS1\NW04SR1\WEBAS_1\ONE_HOST/jload.log
    12.03.2007 22:06:26 com.sap.inst.jload.Jload main
    SCHWERWIEGEND: couldn't connect to DB
    com.sap.sql.log.OpenSQLException: Could not load class com.ddtek.jdbc.sqlserver.SQLServerDriver.
    ERROR 2007-03-12 22:06:26
    CJS-20065  Execution of JLoad tool 'D:\Java/bin/java.exe '-classpath' './sharedlib/antlr.jar;./sharedlib/exception.jar;./sharedlib/jddi.jar;./sharedlib/jload.jar;./sharedlib/logging.jar;./sharedlib/offlineconfiguration.jar;./sharedlib/opensqlsta.jar;./sharedlib/tc_sec_secstorefs.jar;D:\usr\sap/WPT/JC10/j2ee\jdbc\base.jar;D:\usr\sap/WPT/JC10/j2ee\jdbc\util.jar;D:\usr\sap/WPT/JC10/j2ee\jdbc\sqlserver.jar;D:\usr\sap/WPT/JC10/j2ee\jdbc\spy.jar;D:/usr/sap/WPT/SYS/global/security/lib/tools/iaik_jce_export.jar;D:/usr/sap/WPT/SYS/global/security/lib/tools/iaik_jsse.jar;D:/usr/sap/WPT/SYS/global/security/lib/tools/iaik_smime.jar;D:/usr/sap/WPT/SYS/global/security/lib/tools/iaik_ssl.jar;D:/usr/sap/WPT/SYS/global/security/lib/tools/w3c_http.jar' '-showversion' '-Xmx512m' 'com.sap.inst.jload.Jload' '-sec' 'WPT,jdbc/pool/WPT,D:\usr\sap\WPT\SYS\global/security/data/SecStore.properties,D:\usr\sap\WPT\SYS\global/security/data/SecStore.key' '-dataDir' 'S:/D51030724\J2EE_OSINDEP\J2EE-ENG/JDMP' '-job' 'C:\PROGRA1\SAPINS1\NW04SR1\WEBAS_1\ONE_HOST/IMPORT.XML' '-log' 'C:\PROGRA1\SAPINS1\NW04SR1\WEBAS_1\ONE_HOST/jload.log'' aborts with returncode 1. Check 'C:\PROGRA1\SAPINS1\NW04SR1\WEBAS_1\ONE_HOST/jload.log' and 'C:\PROGRA1\SAPINS1\NW04SR1\WEBAS_1\ONE_HOST/jload.java.log' for more information.
    jload.log ###########
    12.03.07 22:06 com.sap.inst.jload.Jload main
    INFO: Jload -sec WPT,jdbc/pool/WPT,D:\usr\sap\WPT\SYS\global/security/data/SecStore.properties,D:\usr\sap\WPT\SYS\global/security/data/SecStore.key -dataDir S:/D51030724\J2EE_OSINDEP\J2EE-ENG/JDMP -job C:\PROGRA1\SAPINS1\NW04SR1\WEBAS_1\ONE_HOST/IMPORT.XML -log C:\PROGRA1\SAPINS1\NW04SR1\WEBAS_1\ONE_HOST/jload.log
    12.03.07 22:06 com.sap.inst.jload.Jload main
    SEVERE: couldn't connect to DB
    com.sap.sql.log.OpenSQLException: Could not load class com.ddtek.jdbc.sqlserver.SQLServerDriver.
    Best regards,
    Bernd

    Hello Kairat,
    Please follow the below mentioned guide to install it.
    Check all the parameters to set and run pre requisite checker before starting installation.
    Keep in mind that before starting any SAP installation you should always run prerequisite checker.
    https://websmp205.sap-ag.de/instguides --> SAP Netweaver -->SAP Netweaver 7.0 -- > Installations --> EHP2
    Regards,
    Amit Barnawal

  • Closing the database connection after report in a server application

    I searched these forums and the internet for a definitive answer on asking the Crystal SDK for java to close the jdbc connection after it has generated a report.  We have been using the Crystal Report SDK to generate reports within our JEE application, built upon the Spring framework, for the past two years.  It works well, especially if you prepare views in the database for your reports.
    From what I can tell once you have used ReportClientDocument to create your report you all the close() method to release resources associated with report generation, but this does not close the jdbc database connection.
    Further research states that if you are using the CrystalReportViewer you can call the dispose method to close the database connection.  We are not using JSP nor this class, so that does us little good.
    Finally I found a post that one could call ((AdvancedReportDocument)reportClientDocument.getReportSource()).dispose().  This doesn't drop the connection either.
    Each report actually opens 3 connections according to SQL Server.  Each report will reuse the connections it has open, so for 50 reports, theoretically, we could have up to 150 connections.  We explained to our client those connections  remain inactive, however this is unacceptable to our client as they would like to minimize the number of connections left open to their database.
    If anyone can post any further information on this issue, it is much appreciated.

    Yes, another team member found the issue.  Quite embarrassing really I didn't see it.  I was looking for the answer within Crystal's libraries.  It had nothing to do with Crystal.
    The developer who wrote the helper code for using Crystal first opened a connection to the datasource for the live production database and read that connection information for the report. Next he set that connection information in the report template's PropertyBag, then ran the report. The developer however forgot to close the connection he used to look up the connection info, leaving a memory leak and using up all the connections.
    I'm glad you inquired.  I forgot to post the resolution here.

  • Error while applying a patch "Unable to get the database connection"

    Dear Experts,
    A patch which got successfully applied is failing Production and the error is kind of surprising to me.
    Apps version is 11.5.10.2
    db version is 10.2.0.4
    The worker log file shows
    Time when worker restarted job: Thu Nov 24 2011 22:14:52
    Start time for file is: Thu Nov 24 2011 22:14:52
    adjava -ms128m -mx256m -nojit oracle.apps.fnd.odf2.FndXdfCmp &un_apps &pw_apps &un_apps &pw_apps &jdbc_protocol &jdbc_db_addr table &fullpath_pa_patch/115
    Reading product information from file...
    Reading language and territory information from file...
    Reading language information from applUS.txt ...
      Temporarily resetting CLASSPATH to:
      "/erp/oracle/prodappl/ad/11.5.0/java/adjri.zip:/usr/java14/jre/lib/charsets.jar:/usr/java14/jre/lib/core.jar:/usr/java14/jre/lib/graphics.jar:/usr/java1
      Calling /usr/java14/bin/java ...
    Exception occured
                  Copyright (c) 2003 Oracle Corporation
                     Redwood Shores, California, USA
             XDF(XML Object Description File) Comparison Utility
                            Version 1
    NOTE: You may not use this utility for custom development
          unless you have written permission from Oracle Corporation.
    Unable to get the database connection using schema username/passwordIo exception: The Network Adapter could not establish the connection
    AD Run Java Command is complete.
                         Copyright (c) 2002 Oracle Corporation
                            Redwood Shores, California, USA
                                        AD Java
                                     Version 11.5.0
    NOTE: You may not use this utility for custom development
          unless you have written permission from Oracle Corporation.
    AD Worker error:
    The above program failed.  See the error messages listed
    above, if any, or see the log and output files for the program.
    Time when worker failed: Thu Nov 24 2011 22:14:53
    {code}
    The error says database connection error.  I am able to connect to the database using sqlplus.  I tried to restart the failed worker, but the same error is repeating. 
    Any help would be appreciated.
    Thanks
    qARS
    Edited by: user7640966 on Nov 24, 2011 9:07 AM                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                   

    Hussein,
    One thing which I noticed now is in the apps Tier the
    tnsnames.ora under $TNS_ADMIN
    shows entry like this:
    PROD=
            (DESCRIPTION=
                    (ADDRESS=(PROTOCOL=tcp)(HOST=<appsServerName>)(PORT=1521))
                    (ADDRESS=(PROTOCOL=tcp)(HOST=<dbServer>)(PORT=1521))
                (CONNECT_DATA=
                    (SID=PROD)
            )Actually *(ADDRESS=(PROTOCOL=tcp)(HOST=<appsIPaddress>)(PORT=1521))* this line in the tnsnames.ora is not correct. In fact the appsServerName should be replaced with dbServerName
    I deleted the tnsnames.ora and reran autoconfig but it is again recreating the same entry.
    Any clue how this can be fixed?
    Thanks
    qARS

  • Can not find Function module in Crystal Report Database Connections FN

    Hi,
    we designed a Function Module XX in SE80.
    We set up BO Interagtion for SAP
    We can connect to the R3( CRM) System.
    We can See FN's.
    We can not see our Function Module XX we designed in SE80 in the Database Connection
    What is missing ?
    Any Authorization missing ?
    Which Where
    Thanks
    Martin Sautter

    Yes,
    we just have got it:
    /Database Assistant / Data / My Connections/<myConnection>/FN -> Right Mice Button/ Options ->  Table Name Like: <MYTABLE>
    than
    /Right Mice Button/Regenerate
    Thanks
    Martin

  • Problem with having several database connection registered in JDEVElOPER

    Hi
    Thank you for reading my post
    I have several AS registered in my Jdeveloper environemtn and several database connections.
    unfortunately some times Jdeveloper can not deploy an application into a server beacause it say that "I failed to create the connection pool", the project has no database stuff at all but Jdeveloper try to register and create connection pools for those connection that i hace registered in the Databse coonnection node.
    It fails because in that particular server which i want to deploy the application i have not add all databases JDBC driver.
    is there any solution for it?
    thanks

    Hi,
    see Tools --> Preferences --> Deployment
    Uncheck the "Bundle default data-sources.xml during deployment
    Frank

  • Problem with database connection in Jdev 11

    Hello,
    my jdev version is 11 and i want do really simple task create new database connection to my oracle db.
    I open database navigator and click new connection. i want jdbc connection but after i fill this form i pressed test connection button and get this error msg:
    Test failed: 4
    i think i have correct information but i tried this, i opened my older jdev 10 and copy jdbc url from my old db connection.
    In jdev 11 i checked Enter Custom JDBS Url and pasted url from jdev 10 and i get:
    Test failed: 4
    What is wrong?
    Thanks for your advice.
    J.

    I add new information:
    i cant connect to oracle db 8, but i try another db in my company which is 10 and its working fine.
    I write java class and try connect to db 8 via jdbc manually:
    String url = "jdbc:oracle:thin:@SERVER:1525:SID";
    String user = "user1";
    String password = "aaa";
    Class.forName("oracle.jdbc.driver.OracleDriver");
    // DriverManager.registerDriver (new oracle.jdbc.driver.OracleDriver());
    Connection conn = DriverManager.getConnection(url, user, password);
    and i get this:
    Exception in thread "main" java.lang.ArrayIndexOutOfBoundsException: 4
         at oracle.jdbc.driver.T4C8TTIdty.marshal(T4C8TTIdty.java:468)
         at oracle.jdbc.driver.T4CConnection.logon(T4CConnection.java:339)
         at oracle.jdbc.driver.PhysicalConnection.<init>(PhysicalConnection.java:621)
         at oracle.jdbc.driver.T4CConnection.<init>(T4CConnection.java:203)
         at oracle.jdbc.driver.T4CDriverExtension.getConnection(T4CDriverExtension.java:34)
         at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:501)
         at java.sql.DriverManager.getConnection(DriverManager.java:525)
         at java.sql.DriverManager.getConnection(DriverManager.java:171)
         at project1.Class1.main(Class1.java:31)
    i hope this will be more usefull and i know i write this info about db's version little bit late.
    J.

  • Creating new Data Source Error - Database connection Failed

    Successfully installed and configured 11.1.1.3.0. Planning and Essbase dev.
    Went to Workspace > Administer > Classing Planning Administration > Manage Data Sources > Create Data Source.
    Entered all info about the application database , etc. Getting error "The database connection failed" (I was able to connect with no problem during the install)
    SQL server 2005 is on the same physical server.
    The diagnostic tool shows database connection passed for planning. A new database was created for the new application.
    The server event viewer shows these errors.
    "Login failed for user 'xxx-hyperion'. The user is not associated with a trusted SQL Server connection."
    Group Policy Error "The client-side extension could not apply computer policy settings for 'Default Domain Policy {xxx}' because it failed with error code '0x80070003 The system cannot find the path specified.' See trace file for more details. "
    The Group Policy client-side extension Group Policy Services failed to execute. Please look for any errors reported earlier by that extension.
    Any help is appreciated.

    Datasource for the application.
    I have created a sql db for this planning application (my datasource). See my first message for more details.
    When you create a new planning application, you need to associate it with a data source. Since this is a new install, I don't have any data sources available yet.
    So, "To create, edit or delete data sources, click Manage Data Source."
    This page lets you validate your connection to the database and essbase server. My essbase server connection validates! The database connection does not validate after I enter all the relevant information.
    SCREEN INFO BELOW
    Fields displayed with an asterisk (*) are mandatory.
    Data Source Name *:
    Data Source Description:
    Select Database Platform
    Microsoft SQL Server
    Application Database
    Server * :
    Port * :
    Database *:
    User *:
    Password *:
    Click "Validate Database Connection"
    ERROR ---> Database connection failed.
    So it does not let me create a data source for my new planning application, so I cannot create a new planning application.
    Thanks in advance.

  • JDBC Adapter - Established database connection failed

    Hi Guys,
    we have installed the JDBC Adapter based on the How To Guide and we checked after the installation the  Libaries :Cluster --> Server --> Libraries --> com.sap.aii.af.jmsproviderlib and the box Box "JARs Contained" was filled.
    So in my point of view we have done everything right during the installation.
    Now the developer tested theJDBC Adapter and he comes back with following Error:
    Attempt to establish database connection failed with SQL error com.sap.aii.adapter.jdbc.sql.DriverManagementException: Cannot establish connection to URL "jdbc:microsoft:sqlserver://xxx.x.xx.xxx:1433; databaseName=CZZ03;":ClassNot FoundException: com.microsoft.sqlserver.jdbc.SQLServerDriver
    Do you have any ideas?
    Regards
    Markus

    Hello Markus,
    To install JDBC driver follow the how to guide.
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/xi/xi-how-to-guides/how%20to%20install%20and%20configure%20external%20drivers%20for%20jdbc%20and%20jms%20adapters.pdf
    Configuration of JDBC Adapter for SQL Server
    JDBC Driver = com.microsoft.jdbc.sqlserver.SQLServerDriver
    Connection = jdbc:microsoft:sqlserver://hostname:<port>;DatabaseName=<DBName>
    UserID and Password.
    If the connection is not working find the correct port number.
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/40b92770-db81-2a10-8e91-f747188d8033
    JDBC- X I -  R/3 Scenario
    /people/bhavesh.kantilal/blog/2006/07/03/jdbc-receiver-adapter--synchronous-select-150-step-by-step
    /people/sap.user72/blog/2005/06/01/file-to-jdbc-adapter-using-sap-xi-30
    Thanks,
    Satya Kumar
    Reward Points If it is Useful..

  • J2EE Struts - Database connection failed - help???:(

    Hello,
    I have built a little web application and it works without any problems. In the next step I tried to add a database connection but I have already worked on it for at least one day and I could not fix the problem with the database connection.
    I downloaded the MySQL Server 5.0 and installed it, furthermore I have downloaded the jdbc driver mysql-connector-java-3.1.11.zip and extracted it to the MySQL Server 5.0 directory. Furthermore I have added under system settings - system - etended - system variables the whole path to the driver -> C:\Programme\MySQL\MySQL Server 5.0\mysql-connector-java-3.1.11\mysql-connector-java-3.1.11-bin.jar to the CLASSPATH systemvariable.
    Then I have startet the SQL Server 5.0 with mysqld --console from the command line.
    Furthermore I have added under Project-Properties-Java Build Path - Libraries - Add External JARs in Eclipse the mysql-connector-java-3.1.11-bin.jar to my Struts WebProject.
    To test the whole thing I have added to the existing test-database from mysql a table named owner and wanted to test the database connection in the Action-class with the following statements - I quote the whole execute method of the OwnerAction class:
    public ActionForward execute(
                     ActionMapping mapping,
                     ActionForm form,
                     HttpServletRequest request,
                     HttpServletResponse response)
                     throws Exception {
                   OwnerForm ownerForm = (OwnerForm) form;
                   String greet = ownerForm.getGreet();
                   String name = ownerForm.getName();
                   request.setAttribute("name", name);
                   request.setAttribute("greet", greet);
                   String address = ownerForm.getAddress();
                   String email = ownerForm.getEmail();
                   int tel = ownerForm.getTel();
                   Connection conn = null;
                   Statement stmt = null;
                   ResultSet rs = null;
                   DriverManager.registerDriver(new org.gjt.mm.mysql.Driver());
                   conn = DriverManager.getConnection("jdbc:mysql://localhost:3306/test","root","sa");
                   try {
                         //conn = dataSource.getConnection();
                         stmt = conn.createStatement();
                         int id = 0;
                         rs = stmt.executeQuery("select max(id) as counter from owner");
                         while(rs.next()){
                            id = rs.getInt("counter");
                         id += 1;
                         stmt.executeUpdate("insert into owner values("+id+", '"+greet+"', '"+name+"', '"+email+"', '"+address+"', "+tel+")");
                         rs.close();
                         stmt.close();
                         conn.close();
                      catch(SQLException e){
                         throw new SQLException("database error");
                      // Forward control to the specified success target
                      return (mapping.findForward("success"));
          }But when I execute the WebApplication and the Action will be called the following error message appears in the browser:
    HTTP Status 500 -
    type Exception report
    message
    description The server encountered an internal error () that prevented it from fulfilling this request.
    exception
    javax.servlet.ServletException: Servlet execution threw an exception
         org.jboss.web.tomcat.filters.ReplyHeaderFilter.doFilter(ReplyHeaderFilter.java:81)
    root cause
    java.lang.NoClassDefFoundError: org/gjt/mm/mysql/Driver
         com.asprise.struts.action.OwnerAction.execute(OwnerAction.java:72)
         org.apache.struts.action.RequestProcessor.processActionPerform(RequestProcessor.java:484)
         org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:274)
         org.apache.struts.action.ActionServlet.process(ActionServlet.java:1482)
         org.apache.struts.action.ActionServlet.doPost(ActionServlet.java:525)
         javax.servlet.http.HttpServlet.service(HttpServlet.java:717)
         javax.servlet.http.HttpServlet.service(HttpServlet.java:810)
         org.jboss.web.tomcat.filters.ReplyHeaderFilter.doFilter(ReplyHeaderFilter.java:81)
    note The full stack trace of the root cause is available in the Apache Tomcat/5.5 logs.
    It must depend with anything that the driver was not found but I have defined it in the CLASSPATH variable and added it to the Web-Project in eclispe.
    Has anybody an idea what I have else made wrong or have forgotten??:(:(:(
    thanks in advance
    lg
    pat

    One thing I have forgotten - I have also copied the mysql-connector-java-3.1.11-bin.jar in the WebRoot\WEB-INF\lib directory of my EasyStruts WebApplication.
    Can anything else be wrong??:(:((
    regards

  • J2EE - database connection failed...:(:(:(

    Hello,
    I have built a little web application and it works without any problems. In the next step I tried to add a database connection but I have already worked on it for at least one day and I could not fix the problem with the database connection.
    I downloaded the MySQL Server 5.0 and installed it, furthermore I have downloaded the jdbc driver mysql-connector-java-3.1.11.zip and extracted it to the MySQL Server 5.0 directory. Furthermore I have added under system settings - system - etended - system variables the whole path to the driver -> C:\Programme\MySQL\MySQL Server 5.0\mysql-connector-java-3.1.11\mysql-connector-java-3.1.11-bin.jar to the CLASSPATH systemvariable.
    Then I have startet the SQL Server 5.0 with mysqld --console from the command line.
    Furthermore I have added under Project-Properties-Java Build Path - Libraries - Add External JARs in Eclipse the mysql-connector-java-3.1.11-bin.jar to my Struts WebProject.
    To test the whole thing I have added to the existing test-database from mysql a table named owner and wanted to test the database connection in the Action-class with the following statements - I quote the whole execute method of the OwnerAction class:
    public ActionForward execute(
                     ActionMapping mapping,
                     ActionForm form,
                     HttpServletRequest request,
                     HttpServletResponse response)
                     throws Exception {
                   OwnerForm ownerForm = (OwnerForm) form;
                   String greet = ownerForm.getGreet();
                   String name = ownerForm.getName();
                   request.setAttribute("name", name);
                   request.setAttribute("greet", greet);
                   String address = ownerForm.getAddress();
                   String email = ownerForm.getEmail();
                   int tel = ownerForm.getTel();
                   Connection conn = null;
                   Statement stmt = null;
                   ResultSet rs = null;
                   DriverManager.registerDriver(new org.gjt.mm.mysql.Driver());
                   conn = DriverManager.getConnection("jdbc:mysql://localhost:3306/test","root","sa");
                   try {
                         //conn = dataSource.getConnection();
                         stmt = conn.createStatement();
                         int id = 0;
                         rs = stmt.executeQuery("select max(id) as counter from owner");
                         while(rs.next()){
                            id = rs.getInt("counter");
                         id += 1;
                         stmt.executeUpdate("insert into owner values("+id+", '"+greet+"', '"+name+"', '"+email+"', '"+address+"', "+tel+")");
                         rs.close();
                         stmt.close();
                         conn.close();
                      catch(SQLException e){
                         throw new SQLException("database error");
                      // Forward control to the specified success target
                      return (mapping.findForward("success"));
          }But when I execute the WebApplication and the Action will be called the following error message appears in the browser:
    HTTP Status 500 -
    type Exception report
    message
    description The server encountered an internal error () that prevented it from fulfilling this request.
    exception
    javax.servlet.ServletException: Servlet execution threw an exception
         org.jboss.web.tomcat.filters.ReplyHeaderFilter.doFilter(ReplyHeaderFilter.java:81)
    root cause
    java.lang.NoClassDefFoundError: org/gjt/mm/mysql/Driver
         com.asprise.struts.action.OwnerAction.execute(OwnerAction.java:72)
         org.apache.struts.action.RequestProcessor.processActionPerform(RequestProcessor.java:484)
         org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:274)
         org.apache.struts.action.ActionServlet.process(ActionServlet.java:1482)
         org.apache.struts.action.ActionServlet.doPost(ActionServlet.java:525)
         javax.servlet.http.HttpServlet.service(HttpServlet.java:717)
         javax.servlet.http.HttpServlet.service(HttpServlet.java:810)
         org.jboss.web.tomcat.filters.ReplyHeaderFilter.doFilter(ReplyHeaderFilter.java:81)
    note The full stack trace of the root cause is available in the Apache Tomcat/5.5 logs.
    It must depend with anything that the driver was not found but I have defined it in the CLASSPATH variable and added it to the Web-Project in eclispe.
    Has anybody an idea what I have else made wrong or have forgotten??:(:(:(
    thanks in advance
    lg
    pat

    One thing I have forgotten - I have also copied the mysql-connector-java-3.1.11-bin.jar in the WebRoot\WEB-INF\lib directory of my EasyStruts WebApplication.
    Can anything else be wrong??:(:((
    regards

  • New database connection failed with oepe

    Hi everybody,
    @http://docs.oracle.com/cd/E27086_02/help/oracle.eclipse.tools.common.doc/html/install.html#install_oepe
    Oracle Enterprise Pack for Eclipse Installation Guide says:
    "You can install OEPE using any of the following ways:
    Download, and then unzip OEPE plugins directly into the Eclipse dropins folder and restart Eclipse."
    This is what I have done,
    then when I create a new database connection, and I press the button "test connection" i got a pop up saying "Ping failed" giving details:
    java.lang.ClassNotFoundException: oracle.jdbc.OracleDriver
         at java.net.URLClassLoader$1.run(Unknown Source)
         at java.security.AccessController.doPrivileged(Native Method)
         at java.net.URLClassLoader.findClass(Unknown Source)
         at java.lang.ClassLoader.loadClass(Unknown Source)
         at java.net.FactoryURLClassLoader.loadClass(Unknown Source)
         at java.lang.ClassLoader.loadClass(Unknown Source)
         at oracle.eclipse.tools.database.connectivity.db.OracleJDBCConnection.createConn(OracleJDBCConnection.java:198)
         at oracle.eclipse.tools.database.connectivity.db.OracleJDBCConnection.createConnection(OracleJDBCConnection.java:149)
         at org.eclipse.datatools.connectivity.DriverConnectionBase.internalCreateConnection(DriverConnectionBase.java:105)
         at org.eclipse.datatools.connectivity.DriverConnectionBase.open(DriverConnectionBase.java:54)
         at org.eclipse.datatools.connectivity.drivers.jdbc.JDBCConnection.open(JDBCConnection.java:73)
         at oracle.eclipse.tools.database.connectivity.db.OracleJDBCConnectionFactory.createConnection(OracleJDBCConnectionFactory.java:26)
         at org.eclipse.datatools.connectivity.internal.ConnectionFactoryProvider.createConnection(ConnectionFactoryProvider.java:83)
         at org.eclipse.datatools.connectivity.internal.ConnectionProfile.createConnection(ConnectionProfile.java:359)
         at org.eclipse.datatools.connectivity.ui.PingJob.createTestConnection(PingJob.java:76)
         at org.eclipse.datatools.connectivity.ui.PingJob.run(PingJob.java:59)
         at org.eclipse.core.internal.jobs.Worker.run(Worker.java:54)
    Did I miss something?

    The documentation is out of date. The unzip to dropins method is no longer supported. The OEPE zip you downloaded is actually an archived repository. You can follow the instruction for installing using Eclipse Update Manager and point to the downloaded zip instead of the online repository.
    I will follow up to get the docs updated.
    - Konstantin

Maybe you are looking for

  • Help! Installed SSD and now no itunes or iphoto

    Hi all, I've succesfully replaced my optical drive with a new SSD, leaving my old HD in place. Things were going well until I discovered that I can't connect iTunes to my old media folder and iPhoto crashes. What I would like to do: - Use the SSD as

  • Selection-Screen validation is not working

    Dear Gurus, I did one report in that,selelction screen is not working properly. if i give input by F4 searching,selection condition not working. it does not retrive the particular result instead of that it retrive the all values what can i do for thi

  • Variable number of arguments in procedure PL/SQL

    Hello everyone, I have a "simple" question : can a procedure PL/SQL take a variable number of arguments ? In my case, the procedure is called by the submit button of a form, and the form has variable number of inputs... Thanks you !

  • Go to web page, click a particular link, click again anywhere, repeat.

    Can anyone share how I might do this? Automator, AppleScript? What would be the exact procedure? Thanks

  • Enhancement Package Installation option missing

    Hi, I've installed the latest suport package stack in a SAP ERP 6.0 system, and now I need to upgrade it to Eph4. When I go to mopz and create a new transaction, in step 2 "Select Files" on "Calculate download files automatically" window, normally tw