ACS Database Replication between SE and Windows

I currently have 2 Windows ACS servers (4.0.1.27) in production and replicating databases. I also have a solution engine (appliance) running 4.1.4.13.7. I plan to upgrade the Windows ACS servers to 4.1.4.13.7 (same as the SE). I know that the software versions have to match for replication to work. Recently, I received conflicting information about database replication. I was told that a ACS SE (solution engine 1113) can not replicate to a Windows ACS server, even if the software versions match. Before I change my production environment, I thought would seek out additional input.

Yes, you can replication acs windows with acs appliance. It works fine.
Regards,
~JG

Similar Messages

SQL Database replication between Primary and DR site

Hi,
We are setting up a DR Site, for our Production SAP system.
At present the curren setup for Production SAP system are as follows.
SAP ERP 2005 (SAP ECC 6.), ABAP+JAVA on Windows with MS SQL Server
2005.
Data are stored on SAN and SAP installed on MSCS Cluster enviornment.
For Setting up the DR site, we are setting up Central System
installation and replication will be configured between SAP
Production/Primary system and DR site.
We are shoadwing at our test setup and facing below replication issues
while setting up transactional replication in MS SQL server 2005.
1. At present 78716 articles are available on Production Database, and
SQL fails the replication publication after 59000 articles.
We open the ticket with Microsoft and below are the suggestion provided
by them.
1. Microsfot suggest to prepare 2\3 publications for total number of
tables, 1 publication for all Views and 1 publication for SPs,
Functions and Data types with single Distributor Agent. Distribution Agent will
take care of propagating changes in the tables across the publications.
2. All related tables (Parent child relationship) to be published on
one publication.
3. It would recommend to create 4 publications: 2 for the tables, 1 for
the views and the other for the stored procedures. This would ensure
better manageability.
The main concerns here is about splitting the tables into two different
sets with about 30,000 in one of the publications and the rest in the
second publication.
You will have to make sure that all the dependant tables are included
in the same publication. Since this database is a SAP database, requesting to provide information as follows.
1. Identify and split the entire set of table into two/three groups.
2. How to publish dynamic tables (The tables which get created post
publication process).
Regards,
JP

Hi,
for database mirroring and log shipping there a several very good whitepapers and other documents out there:
[http://download.microsoft.com/download/d/9/4/d948f981-926e-40fa-a026-5bfcf076d9b9/SAP_SQL2005_Best%20Practices.doc]
[http://blogs.msdn.com/saponsqlserver/archive/2007/09/26/what-did-we-learn-using-database-mirroring-over-the-last-two-years-in-our-sap-erp-system-second-revision.aspx]
[http://msevents.microsoft.com/CUI/WebCastEventDetails.aspx?EventID=1032297524&EventCategory=5&culture=en-US&CountryCode=US]
[http://sqlcat.com/whitepapers/archive/2007/11/19/database-mirroring-best-practices-and-performance-considerations.aspx]
Furthermore see note 965908 for this.
The needed bandwidth depends on the amount of log you create in a given timeframe. Internet bandwidth can be suffient, if you don't generate much log (btw, i don't understand the term RTD is 220).
In the log shipping scenario you can run the DR site in standby mode, then a readonly access (as DBCC etc.) is possible.
Regards
Clas Hortien

ACS Database Replication

I have 2 ACS server
- ACS Appliance(v4.0)
- ACS Server fo Window(v3.0)
I want to design Primary ACS Appliance and Secondary ACS for Window
I know the method For ACS Database replication
Thanks
cheolhyeon

Hello Hanwu
Please send a the screenshot of replication page from primary server.
thanks
Devashree

How can I resolve conflict between itunes and Windows 8.1

When downloading itunes to my laptop computer, using Windows 8.1 my email/network account will not work on that computer. It is fine on other devices such as ipad and Windows phone. I can also pick up emails on online on the same laptop. There appears to be a conflict between itunes and Windows 8.1

Please see Boot Camp for comments.

Share files between Mac and Windows in same iMac with boot camp

Hello,
I am new in using Mac and recently I buy a IMac 24" model.
I used to use PC a long time with a lot of old document.
I want to install Windows XP with boot camp.
But I also want to share my documents, music, video files between Mac and Windows in same iMac.
How can I do this?
Thanks in advance,
Eric

Hi Eric and welcome to Discussions and the Apple world.
Mac OSX can read and write from Windows partitions (like the BootCamp Windows partition you are about to create) when using FAT32 as file system for Windows.
However with FAT32 you are limited to a partition size of 32GB.
Mac OSX can also read from Windows partitions that uses the NTFS file system, but it can not write to them unless you use a third-party helper like either Paragons NTFS for Mac http://www.paragon-software.com/home/ntfs-mac/ or NTFS-3G http://www.ntfs-3g.org/
Windows can not even see or use a Mac OSX partition without additional help by MacDrive http://www.mediafour.com/products/macdrive/
Regards
Stefan

Data Replication Between Sqlserver and Oracle11g using materialized view.

I have Sqlserver 2005 as my source and oracle11g as my target.I need to populate the target daily with change data from source.
for that we have created a dblink between sqlserver and oracle and replicated that table as a Materialized view in Oracle.
problem we are getting here is Fast refresh option is not available.each day it will pick full data from the source.
is there any way to use Fast refresh in this scenario??
Thanks in advance.
Regards,
Balaram.

Pl do not post duplicates - Data Replication Between Sqlserver and Oracle11g using materialized view.

Help: symbol shifting between mac and windows, flash cs3

I'm doing work reviewing flash files created by other users
on mac and windows. I'm using os x 10.5.6. When I open a file
created in windows / flash cs3 some symbols on the stage will have
shifted upwards on the y axis. If I correct the shift and then send
it back to the windows user they see the symbols incorrectly
aligned, as if I had moved symbols around on a correctly aligned
file.
The strange thing is not everything on the stage is shifted.
Only particular symbols will move, and it's usually symbols only
(not text frames, drawing objects, etc).
I believe there's a general history of bad behavior when
saving flash files and trading them back and forth between mac and
windows, but does anyone know what may be causing this? Or a
remedy?
Thank you in advance.
Peter

also, I tried opening the same files in vista using a mac
mini with vista installed on a bootcamp partition. When opening
other windows authored flash files there I had shifting issues as
well, so I'm not convinced it's strictly a mac vs. windows issue.
Unless it's a flash cs3 on windows xp doesn't like mac flash cs3
and vista flash cs3...

Transferring keyboard shortcuts between Mac and Windows

I need to migrate users from Mac (CS 5.5) to Windows 7 (CS 6). I have tried to transfer a user's custom keyboard shortcut set by copying the .indk file to the appropriate folder on the PC, and although it shows up in the list, when I try to select the set I get an error saying it is in the wrong format or the file could be damaged. Is there a way of transferring keyboard shortcuts between Mac and Windows?

Shortcut sets seem to be human-readable text files, so you could try making a copy and doing some editing, changing cmd to ctrl and opt to alt, and change the platform value in the first line to "win" though I can't make any promise it will work.
There are also some known problems trying to migrate legacy sets into newer versions of ID since CS5, I think.

File transfer between Mac and Windows

I am running Windows on my Mac and I transfer files between mac and Windows alot using my external hard drive. I was wondering if there was an easier way to do this than having to use my external hard drive like a networking solution or something. Thanks...

i also run windows on my mac (for work). The issue i had was that when booted in osx, i could see the windows partition, and copy files FROM it to the mac side, but i could not copy files TO the windows partition.
As i understand it, this is because the apple NTFS driver (to read the windows partition) only allows read access (not read and write access). It was easily solved with MacFuse (which is an open source way to add different disk file systems to your mac, kind of like teaching it a new language), and NTFS-3G for mac osx.
http://macntfs-3g.blogspot.com/
scroll down a bit for the download link. The installer will put in MacFuse and NTFS-3G, so it's the only one you need.
After a reboot, i can read/write to the windows partition while booted into macosx (and it's free).
i hope that helps.
p.s. the efi boot manager download is NOT required.

Syncing between mac and windows

I have an issue where I have created files in Adobe Draw (and previously in Ideas) which I have then saved to the Creative Cloud. I open these files in Illustrator on my Mac, save them back to the cloud then open them on a Windows PC. When I save these files on the PC, I get the Unable to Sync Files error message. I have gone through these solutions Error: "Unable to sync files" but no solution applies. If I create a file on my PC, it syncs fine. Is there a known issue when sharing files between Mac and Windows? I can save the files to Dropbox or email them and I don't have this issue. Thanks

Hello,
Would you be able to send me your log files so I can better see what might be causing this issue issue. I will need Logs from both your Mac and Windows machines please.
You can find your log files at...
Mac:
/Users/<username>/Library/Application Support/Adobe/CoreSync
Windows:
C:\Users\<username>\AppData\Roaming\Adobe\CoreSync
'Library' on Mac and 'AppData' on Windows are both hidden folders. Please read these pages for help on showing these folders:
http://helpx.adobe.com/x-productkb/global/show-hidden-files-folders-extensions.html (Win)
https://helpx.adobe.com/x-productkb/global/access-hidden-user-library-files.html (Mac)
please upload them to Creative Cloud and send me a link to the logs at [email protected]
Thanks
Warner

Database link between oracle and sql server

dear all,
i m a newbie to oracle and i need your help to know how to create a database link between oracle and sql server.my oracle version 10.2.0.3 and platform is redhat linux 5.7.your help appreciated.
thanks in advance.

[oracle@localhost ~]$ rpm -qa | grep -i odbc
php-odbc-4.3.9-3.15
unixODBC-kde-2.2.11-1.RHEL4.1
MyODBC-2.50.39-21.RHEL4.1
postgresql-odbc-7.3-8.RHEL4.1
freeradius-unixODBC-1.0.1-3.RHEL4.3
qt-ODBC-3.3.3-9.3
unixODBC-devel-2.2.11-1.RHEL4.1
unixODBC-2.2.11-1.RHEL4.1
is this showing odbc installed in os?

Difference between view and window ?

Hi All,
Can you tell me a basic difference between view and window , maybe you can correlate your answers with concepts of HTML.
Rajeev

Hi Rajeev,
A window is a place for displaying your views. Your view is not available to the outside world. View is available only to your component. However, your window is an interface view, which can be displayed in other components.
A view contains your UI elements. It has a layout (a window does not). A window contains embedded views.
In the window, you can define how navigation between views takes place (by creating navigation links).
Regards,
Neha
<i><b>PS: Reward if helpful</b></i>

Problems using RMI between linux and windows.

I have problems using RMI between linux and windows.
This is my scenario:
- Server running on linux pc
- Clients running on linux and windows PCs
When a linux client disconnect, first time that server try to call a method of this client, a rmi.ConnectException is generated so server can catch it, mark the client as disconnected and won't communicate with it anymore.
When a windows client (tested on XP and Vista) disconnect, no exceptions are generated (I tryed to catch all the rmi exception), so server cannot know that client is disconnected and hangs trying to communicate with the windows client.
Any ideas?
Thanks in advance.
cambieri

Thanks for your reply.
Yes, we are implementing a sort of callback using Publisher (remote Observable) and Subscribers (remote Observer). The pattern and relative code is very well described at this link: http://www2.sys-con.com/ITSG/virtualcd/java/archives/0210/schwell/index.html (look at the notifySubscribers(Object pub, Object code) function).
Everything works great, the only problem is this: when a Publisher that reside on a Linux server try to notify something to a "dead" Subscriber that reside on a Windows PC it does't receive the usual ConnectException and so tends to hang.
As a workaround we have solved now starting a new Thread for each update (notification), so only that Thread is blocked (until the timeout i guess) and not the entire "notifySubscribers" function (that contact all the Subscribers).
Beside this, using the Thread seem to give us better performance.
Is that missed ConnectException a bug? Or we are just making some mistake?
We are using java 6 and when both client and server are Linux or Windows the ConnectException always happen and we don't have any problem.
I hope that now this information are enough.
Thanks again and greetings.
O.C.

Connect as sysdba between Linux and Windows without using password

hello
Hello
I need to connect as sysdba between Linux and Windows without using password for the sys user
Sqlplus /@string_connection
Plz help me

Duplicate post:
Connect as sysdba between Windows and Linux
Actually you have been given the answer in your above thread. You need to read the Oracle documentation. Search password file at tahiti.oracle.com
regards

Database replication between 2ACSs (V4.0 & V4.1)

Hi All,
1. ACS in production in the N/W:
Release 4.0(1) Build 44
2.Installed recently another ACS serer for backup purposes and currently as no Data :Release 4.1(1) Build 23
Now...
a. Will it be possible to (auto)replicate between these two vesrions.
b.Will some one provide steps/links to configure replication and any required configuration changes to make sure (1) is primary & (2) backup [incase primary fails)
Thanks in advance.
MS

Cisco does not recommend to do replication between different versions of ACS.
I have also seen dissimilar versions to cause problems like database corruption, though it might work in some case.
To be on safer side keep both ACS on same version and only then replicate.
Following link can help you configure replication:
http://www.cisco.com/univercd/cc/td/doc/product/access/acs_soft/csacs4nt/acs41/user/scadv.htm#wp756476
For configuring Backup ACS incase primary fails you need to configure backup server on the AAA client (router,switch) because only AAA client will forward the request to secondary server in case primary fails.
~Rohit

ACS Database Replication between SE and Windows

Similar Messages

Maybe you are looking for