ACS database users and passwords.

Hi, i need to get all users and passwords from a acs 3.3 database unencrypted.
How can i do it?
Could you help me ?

To get a list of the USers in the ACS database use the CSUTIL tool on Windows platform.
go to bin directory under the ACS install folder and do
CSUtil.exe -u
this will generate a file "users.txt" in the same folder.
But I dont think you can get the password in unencrypted form.

Similar Messages

External Web Service - User and password in HTTP header

Hi!
How is it possible to add user and password in the HTTP header in a external web service call?
I have created a "Portal Service from WSDL file - Client side" with the wizard in SAP Developer Studio. I following the Java Development Guide - Web Service Security, and use the secured service connection. I have also created a new System Landscape, but should the new system be based on HTTP, my own PAR or what?
How can I check that the user and password is added to the HTTP header or the SOAP envelope? Do I have to scan http traffic with a proxy as Paros or can I find the request sent from SAP EP in the logs?
Cheers
Asle

Hello All,
I have been struggling a bit while putting a reasonable security framework on a jax-rpc style web service. I'm using JWSDP1.2 to set up the webservice. I've tried to outline my problem below. Please correct me where I'm wrong.
I've been through the Sun's WS tutorials, but they are not really clear on security. However, from them I surmised that there are two decent authentication techniques. HTTP Basic and mutual authentication (MA) . Both have their drawbacks though. HTTP Basic suffers from poor encryption while MA is a bit difficult to set up on both client and server sides. Another problem with MA is that there is no central repository for users/passwords.
OK, what I would really like to do is use my own user database to verify users/passwords i.e. use a HTTP Basic like authentication (but at application level) but run it over SSL for encryption. It seems simple, but is it possible?
Also, I have noted that when I use HTTP Basic on the service side, and use a java client, then setting username/password has no effect. In other words, I can always access the web-service, even with wrong username/password.
Sorry for the long post. Hope someone can help. Thanks.

What is the user and password to Oracle 8.17

Dear expert,
I have loaded IDES 4.7 with Oracle 8.17.
I wish to query the SAP table using Oracle PL/SQL.
What is the user, password and string to login into SAP Oracle database? Since I was not asked for user and password when installing Oracle I do not know how to login.
Also can you let me know how to view/change table fields in SAP tables. I understand there are different ways but which in your opinion is the easiest to find the record I want to correct(as some tables have many fields).
Your kind assistance is appreciated.

Thank you for your reply. Both the user and password does not work on my IDES 4.7e system.
However I tried with user Internal and without password and I successfully login.
I then create a new user and also change the user=system
password.

Database, user name, password for Crystal report

We're running BOE XI 3.1 and we use WebI reports. One of our departments uses Crystal reports, and they'd like to be able to run them in our BOE environment so that they can refresh reports over the Web. They uploaded a report to BOE (using Add -> Crystal Reports) but when they try to refresh it they aren't prompted for the database or a password, and the refresh fails.
How do you specify the database / data source / data connection (or whatever it's called) for a Crystal report? How do you specify the user name and password to use for authenticating to the database?
Thanks,
Laura

I am fairly new on this forum but we have been doing exactly what you are talking about with Crystal Reports published to BO XI 3.1 for a while. There are a few things we have found that have to be done to make this work right...
- Use the EXACT same ODBC/database connection setup on both the Crystal Report developer's machine and on the BO server
- On the developer's machine use integrated security for the database connection
- Then after you upload the report to BO, go into CMC and open the Crystal Report's properties. In there under "Default Settings" you will see an option for Database Configuration. The User and Password under the "Use original logon informstion from the report" should be empty. Put in a valid userid and password that has access to the database.
- Also, in the Database Configuration screen make sure the Server and Database boxes are filled-in - they will be greyed out and you can't change them (this is why you have to make sure the ODBC/database info is the same). If they are wrong, you will need to fix the ODBC/database connection in the original RPT file.
- Finally, you need to scroll to the bottom of the Database Configuration page and select the radio box "Use same database logon as when report is run" and then Save and Close
Now when users run the report it will use the user and password you entered to do it. The disadvantage is you are not using integrated security but then the users also never get prompted for a password. We tried very hard to get integrated security to work but could not manage it.
Hope this helps!
Larry

Do you standard users and password solman 4.0

dear friends,
system: solman 4.0
database: microsoft SQL server 2005
do you standard users and password solman 4.0.
i m not able to log to system ..
i also tried DDIC and SAP* from 000,800..
do you know any other user of solman .. and it's password..
please give me solution..
thanks
zaheer

Hi,
it is a newly installed system? or you forgotten the sap* passowrd
we can try sap* with the password "PASS".But for that you need to carefully delete it at the database level.
the statment somewhat look like
delete USR02 where UNAME = 'SAP*' and MANDT='000'
, since the table, USR02, which is the one that keeps the passwords.
After this, you will be able to log on as SAP* again with password PASS.
Thanks,
Jansi

Linking to an OBIEE report without showing the user and password

Hi!
we are trying to access to an obiee report from an external portal (coded with php).
The idea is that the user clicks on a link an gets the report in pdf format. For that purpose we are using this url:
http://ttivobiee01:7001/analytics/saw.dll?Go&Path=/shared/Prueba/ogp_obi&Action=Print&P0=1&P1=eq&P2="Criteria"."Key"&P3=1402&NQuser=user&NQPassword=pass&format=pdf
But this url is expossing OBIEE's user and password.
In order to avoid this security issue we tried to do an wget of the url but it doesn't return the report. Instead we get an html, which seams to download the report chunk by chunk (using javaScript).
The question is, is there any way that we could let our portal ussers access to an obbie report without expossing the user and password?
I have been looking into oracle forums and have found this: OBIEE Go URL with password protected
but we couldn't use this aproach due to security issues.
Thanks!
Nuria

Hi!
We have finally done this (and it works!)
<?php
$urlInforme='http://obi:7001/analytics/saw.dll?Go&Path=/shared/Prueba/ogp_obi&Action=Print&P0=1&P1=eq&P2="Criterios"."Clave oficial"&P3=1402&NQuser=user&NQPassword=pass&format=pdf';
$ch = curl_init($urlInforme);
$ckfile = tempnam ("./", "CURLCOOKIE");
$ch = curl_init ($urlInforme);
curl_setopt ($ch, CURLOPT_COOKIEJAR, $ckfile);
curl_setopt ($ch, CURLOPT_RETURNTRANSFER, true);
$output = curl_exec ($ch);
$ch = curl_init ($urlInforme);
curl_setopt ($ch, CURLOPT_COOKIEFILE, $ckfile);
curl_setopt ($ch, CURLOPT_RETURNTRANSFER, true);
$fp = fopen("salida.pdf", "w");
curl_setopt($ch, CURLOPT_FILE, $fp);
$output = curl_exec ($ch);
curl_close($ch);
fclose($fp);

I tried to upgrade the ios on the phone and I was asked for my icloud user and password. I don't remember these exactly and I tried several times with different options but unsuccessfully. I also forget my email used to configurate the phone.

How i said on the question. I tried to upgrade the ios on the phone and I was asked for my icloud user and password. I don’t remember these exactly and I tried several times with different options but unsuccessfully. I also forget my email used to configurate the phone. I have the phone box and the bill. I sent you an email with my problem and attachments with the box informations, the bill and the reset request. What to do? You said to me:
Your request comes from an unrecognized email domain. Apple accepts email requests only from email domains for Apple-authorized carriers.
Please re-submit your request using your official carrier domain.
but this email is authorized, what to do??
respectfully, Beba

If you have forgotten then these links are the only way to resolve
http://www.apple.com/support/appleid/
As long as you have owned the iPhone from new and your Apple id is the one used to activate when new
OR have you recently purchased the iPhone secondhand ?

HT1600 I have an Apple TV 2nd Gen, iPad 2 and can't get the icon to appear when i swipe from left to right. What am I missing? I am able to get the 'Home sharing' 'user and password on my Mac.

I have an Apple TV 2nd Gen, iPad 2 and can't get the icon to appear when i swipe from left to right. What am I missing?
I am able to get the 'Home sharing' 'user and password on my Mac.
Also using IPad 2 I am able to get the ITunes to accept the user name and same password as the Mac.
However, the only way I can see the 'Home sharing; icon is in Music on the Ipad. When I tap on the Icon it asks for a password.
When I give the same password, it is rejected.
Help!!!!
Jaxxdiggs

Personally I think the iOS devices are poor at reconnecting - Airplay establishes that a link is available but when the iPhone/iPad has been away from the house and rejoins the network i think AppleTV already thinks it's connected with a different IP address and fails to recognise it has joined the network again with new credentials.
Something along those lines anyway.
I find that a combination of restarting AppleTV, router and iOS device tends to fix it, but not for everyone.
AC

WebService in XI with user and password

Hello,
I´ve created a webservice in XI. When I call this webservice without user and password from an external tool (soapUI 1.7.5), the following error appears:
+Logon Error Message
Der Aufruf der URL http:... wurde aufgrund fehlerhafter Anmeldedaten abgebrochen.+
(means: the call failed because of missing authorization)
Ok, but where can I implement the user and passwort, that this webservice can be called automatically from an other application?
Thanks for your assistence.
Kind regards
Martin

Hi Huber,
but where can I implement the user and passwort, that this webservice can be called automatically from an other application?
open the WSDL ....and in the left side (bottom) u can see option of user name and password...but i guess its not possible to login automaticaly.
u have to provide the username and password evrytime....
regards
biplab

User and Password for JMS-Adapter

Hi all,
when configuring JMS-Adapter e.g. for IBM MQSeries i do not find field where to specify the user and password for the MQ. We configure e.g. a receiver communication channel.
In 2.0 JMS-Adapter we can put user and password like this
JMS.QueueConnectionFactoryImpl.user=YTEST
JMS.QueueConnectionFactoryImpl.password=<!%YTEST%!>
in the property file. We can also hide the passwort with
the mechanism of password token.
How can this be done in JMS 3.0 Adpater? Is it possible?
Thanks,
Ly-Na Phu

Oh, sorry. Now i see the field for user and passwort.
Thanks,
Ly-Na Phu

Link to folder with user and password

Hi all!
From my action I want to redirect to a file in order to download it but the problem is that this file is in a web folder with user/password
How can I redirect to it to downlad it directly without introducing user and password manually by the customer?
Thanks!
T

Do you understand where this user/password restriction comes from? It look like just a HTTP based authentication. A Servlet can access the local file system directly without issueing a new HTTP request for that. Or is that file located at another server?

Problem in getting Portal Mapped user and password in Web Dynpro iView

I am developing a webdynpro iview.My app need to read mapped user and password form a system in Portal runtime.
I used the following codes in my Web Dynpro java program:
     IWDClientUser user = WDClientUser.getCurrentUser();
     IUser iuser = user.getSAPUser();
     IUserMappingService iums = (IUserMappingService)WDPortalUtils.getServiceReference(IUserMappingService.KEY );
//     IUserMappingService iums = (IUserMappingService)
//     PortalRuntime.getRuntimeResources().getService(IUserMappingService.KEY);
     IUserMappingData iumd = iums.getMappingData (systemalias, iuser);
     Map map = new HashMap ();
     iumd.enrich(map);
     String userid = (String)map.get( "user" );
     String pwd = (String)map.get ("mappedpassword");
I've add a sharing references in project properties,the value is "PORTAL:sap.com/com.sapportals.portal.prt.service.usermapping.IUserMappingService"
But when I run the iview on my Portal, it goes wrong, the message is:
com.sap.engine.services.deploy.container.DeploymentException: Clusterwide exception: Failed to prepare application ''local/HomePage'' for startup. Reason= Clusterwide exception: Failed to start dependent library ''com.sapportals.portal.prt.service.usermapping.IUserMappingService'' of application ''local/HomePage''. Status of dependent component: STATUS_MISSING. Hint: Is the component deployed correctly on the engine?
    at com.sap.engine.services.webdynpro.WebDynproContainer.prepareStart(WebDynproContainer.java:1490)
    at com.sap.engine.services.deploy.server.application.StartTransaction.prepareCommon(StartTransaction.java:231)
    at com.sap.engine.services.deploy.server.application.StartTransaction.prepareLocal(StartTransaction.java:184)
    at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhasesLocal(ApplicationTransaction.java:365)
    at com.sap.engine.services.deploy.server.application.ParallelAdapter.runInTheSameThread(ParallelAdapter.java:117)
Anybody can help me?And are there anyother methods can get mapped user and password of Portal systems in Web Dynpro JAVA.

Hi Wayne,
      Did you added com.sap.security.api.jar to your webdynpro project. if not follow this steps.
1. Right-click the project in Eclipse or SAP NetWeaver Developer Studio.
2. Select Properties.
3. Choose Java build path -> Libraries -> Add Variable -> Select variable WD_RUNTIME -> Extend -> com.sap.security -> lib -> com.sap.security.api.jar.
I hope this should solve your problem.
Regards, Suresh KB

UCM Administration Applets request the user and password confirmation

I want to ask if someone has experienced in the UCM Administration Applets, that request the user and password confirmation for each time the applets are executed,
Is there any configuration in the UCM that activates this behavior?
I’m trying to reproduce this behavior in the development environment but with not much success
The UCM version is 10.350
Thanks for your support.

Is there any configuration in the UCM that activates this behaviorNo. It's more likely that you are accessing the applets via a URL that does not match the one you originally used to log in to the Content Server.
For example, you logged into "http://myserver/cs" or "http://<ip address>/cs". However, your HttpServerAddress variable is defined in Content Server as "http://myserver.mydomain.com". (Any absolute links to the applets use the variable to build the URL.) The browser "thinks" this is a new domain, and doesn't forward credentials to the different address. So the applet must prompt again for credentials. (Are you using a load balancer by chance? Does your HttpServerAddress variable in Content Server match the DNS entry being used for the load balancer?)
I've also seen some versions of the Sun client JRE do this by design as a security "feature". If you using IE, make sure your server address is in the "trusted" or "intranet" security zone.

Reset the user and password in the config tool

Dear All,
how can I reset the user and password in the config tool ?
Regards
ertas

how can I reset the user and password in the config tool ?
Section from help:
http://help.sap.com/saphelp_nw70/helpdata/en/1c/129d440bbe4b7d8ae8b82879808d7e/content.htm
Section from SDN Wiki:
https://www.sdn.sap.com/irj/scn/wiki?path=/display/ep/to%252breset%252badministrator%252bpassword%252bthrough%252bconfig%252btool
Regards,
Abhishek.

URL in sender SOAP channel with user and password

Hi Expert,
I have developed SOAP to proxy scenario.The serder WSDL is generated by using sender agreement. In the WSDL we are using default below URL.
http://host:port/XISOAPAdapter/MessageServlet?channel=party:service:channel
But the client requirement is that he want SAP user and password also in above url.
Is this possible in sender SOAP channel?
Any body can please help me for above issue?
Thanks.
Edited by: darshana-PI on Feb 1, 2012 5:26 PM

Thanks prateek,
we have used HTTP plain adapter for this and used below link to call that interface in PI. And its working.
http://server:port/sap/xi/adapter_plain?service=<xxx>&namespace=<xxx>&interface=<xxx>&sap-user=<xxx>&sap-password=<xxx>&qos=BE
I can understand the security related problem, but that was the requirement for end application.
Thanks,
Darshana.

ACS database users and passwords.

Similar Messages

Maybe you are looking for