ACS Express AD

Hi All,
I've setup ACS Express and try to join to MS AD. connectivity passed but it says "Saved settings, but error in joining domain. Error: Timeout occured communicating with AD domain controller.
any suggestion would be very appreciated
Alex

Alex,
Check for communication issues between AD and your express server. Also verify that time is not off by more than 5 minutes.
HTH,
Faisal

Similar Messages

  • ACS Express integration with Active Directory

    Hello,
    I have ACS Express version 5.0.1 installed on Cisco ADE; I'm trying to get it integreated with an Active Directory without sucess.
    I did packet captures on the ASA that is in between and I can see communication going thru just fine. I ran a diagnostic on the ACS express and got this:
    DIAGNOSTIC USING THE IP ADDRESS OF THE DOMAIN CONTROLLER:
    /* Style Definitions */
    table.MsoNormalTable
    {mso-style-name:"Tabla normal";
    mso-tstyle-rowband-size:0;
    mso-tstyle-colband-size:0;
    mso-style-noshow:yes;
    mso-style-priority:99;
    mso-style-qformat:yes;
    mso-style-parent:"";
    mso-padding-alt:0cm 5.4pt 0cm 5.4pt;
    mso-para-margin:0cm;
    mso-para-margin-bottom:.0001pt;
    mso-pagination:widow-orphan;
    font-size:11.0pt;
    font-family:"Calibri","sans-serif";
    mso-ascii-font-family:Calibri;
    mso-ascii-theme-font:minor-latin;
    mso-fareast-font-family:"Times New Roman";
    mso-fareast-theme-font:minor-fareast;
    mso-hansi-font-family:Calibri;
    mso-hansi-theme-font:minor-latin;
    mso-bidi-font-family:"Times New Roman";
    mso-bidi-theme-font:minor-bidi;}
    Output of AD Domain Diagnostics:
    IP Diagnostics
    Local host name: he-zfm-acs-01
    Local IP Address: 172.31.67.10
    Not found in DNS!Make sure it is in Reverse Lookup Zone.
    FQDN host name:he-zfm-acs-01.clarocr.americamovil.ca1
    Domain Diagnostics:
    Domain: 172.24.2.93
    Subnet site:
    WARNING! Unable to locate computer's subnet site in Active Directory.
    Ask your Active Directory administrator to add this computer's subnet
    to the appropriate site.
    DNS query for: _ldap._tcp.172.24.2.93
    Found no SRV records!
    Computer Account Diagnostics
    Not joined to any domain
    AD Agent Process Status: Not joined to any domain
    DIAGNOSTIC USING THE AD REALM:
    /* Style Definitions */
    table.MsoNormalTable
    {mso-style-name:"Tabla normal";
    mso-tstyle-rowband-size:0;
    mso-tstyle-colband-size:0;
    mso-style-noshow:yes;
    mso-style-priority:99;
    mso-style-qformat:yes;
    mso-style-parent:"";
    mso-padding-alt:0cm 5.4pt 0cm 5.4pt;
    mso-para-margin:0cm;
    mso-para-margin-bottom:.0001pt;
    mso-pagination:widow-orphan;
    font-size:11.0pt;
    font-family:"Calibri","sans-serif";
    mso-ascii-font-family:Calibri;
    mso-ascii-theme-font:minor-latin;
    mso-fareast-font-family:"Times New Roman";
    mso-fareast-theme-font:minor-fareast;
    mso-hansi-font-family:Calibri;
    mso-hansi-theme-font:minor-latin;
    mso-bidi-font-family:"Times New Roman";
    mso-bidi-theme-font:minor-bidi;}
    Output of AD Domain Diagnostics:
    IP Diagnostics
    Local host name: he-zfm-acs-01
    Local IP Address: 172.31.67.10
    FQDN host name:he-zfm-acs-02.clarocr.americamovil.ca1
    Domain Diagnostics:
    Domain: CLAROCR.AMERICAMOVIL.CA1
    Subnet site: TELECOM
    DNS query for: _ldap._tcp.CLAROCR.AMERICAMOVIL.CA1
    Found SRV records:
    rom-pro-dc-03.clarocr.americamovil.ca1:389
    Testing Active Directory connectivity:
    Domain Controller: rom-pro-dc-03.clarocr.americamovil.ca1
    ldap: 389/tcp - good
    ldap: 389/udp - good
    smb: 445/tcp - good
    kdc: 88/tcp - good
    kpasswd: 464/tcp - good
    ntp: 123/udp - good
    Domain Controller: rom-pro-dc-03.clarocr.americamovil.ca1:389
    Domain controller type: Windows 2003
    Domain Name: CLAROCR.AMERICAMOVIL.CA1
    isGlobalCatalogReady: TRUE
    domainFunctionality:
    forestFunctionality: 0 = (DS_BEHAVIOR_WIN2000)
    domainControllerFunctionality: 2 = (DS_BEHAVIOR_WIN2003)
    Forest Name: AMERICAMOVIL.CA1
    DNS query for: _gc._tcp.AMERICAMOVIL.CA1
    Testing Active Directory connectivity:
    Global Catalog: rom-des-dc-01.desa1sv.americamovil.ca1
    gc: 3268/tcp - timeout
    No TCP LDAP response, giving up on rom-des-dc-01.desa1sv.americamovil.ca1
    Global Catalog: rom-amv-dc-02.americamovil.ca1
    gc: 3268/tcp - good
    Global Catalog: rom-tlc-dc-01.telecom.americamovil.ca1
    gc: 3268/tcp - good
    Global Catalog: rom-pro-dc-03.clarocr.americamovil.ca1
    gc: 3268/tcp - good
    Global Catalog: rom-tlc-dc-02.telecom.americamovil.ca1
    gc: 3268/tcp - good
    Global Catalog: rom-amv-dc-01.americamovil.ca1
    gc: 3268/tcp - good
    Domain Controller: rom-amv-dc-02.americamovil.ca1:3268
    Domain controller type: Windows 2003
    Domain Name: AMERICAMOVIL.CA1
    isGlobalCatalogReady: TRUE
    domainFunctionality:
    forestFunctionality: 0 = (DS_BEHAVIOR_WIN2000)
    domainControllerFunctionality: 2 = (DS_BEHAVIOR_WIN2003)
    Domain Controller: rom-tlc-dc-01.telecom.americamovil.ca1:3268
    Domain controller type: Windows 2003
    Domain Name: TELECOM.AMERICAMOVIL.CA1
    isGlobalCatalogReady: TRUE
    domainFunctionality:
    forestFunctionality: 0 = (DS_BEHAVIOR_WIN2000)
    domainControllerFunctionality: 2 = (DS_BEHAVIOR_WIN2003)
    Domain Controller: rom-pro-dc-03.clarocr.americamovil.ca1:3268
    Domain controller type: Windows 2003
    Domain Name: CLAROCR.AMERICAMOVIL.CA1
    isGlobalCatalogReady: TRUE
    domainFunctionality:
    forestFunctionality: 0 = (DS_BEHAVIOR_WIN2000)
    domainControllerFunctionality: 2 = (DS_BEHAVIOR_WIN2003)
    Domain Controller: rom-tlc-dc-02.telecom.americamovil.ca1:3268
    Domain controller type: Windows 2003
    Domain Name: TELECOM.AMERICAMOVIL.CA1
    isGlobalCatalogReady: TRUE
    domainFunctionality:
    forestFunctionality: 0 = (DS_BEHAVIOR_WIN2000)
    domainControllerFunctionality: 2 = (DS_BEHAVIOR_WIN2003)
    Domain Controller: rom-amv-dc-01.americamovil.ca1:3268
    Domain controller type: Windows 2003
    Domain Name: AMERICAMOVIL.CA1
    isGlobalCatalogReady: TRUE
    domainFunctionality:
    forestFunctionality: 0 = (DS_BEHAVIOR_WIN2000)
    domainControllerFunctionality: 2 = (DS_BEHAVIOR_WIN2003)
    Forest Name: AMERICAMOVIL.CA1
    Computer Account Diagnostics
    Not joined to any domain
    AD Agent Process Status: Not joined to any domain

    Dennis,
    TIme in sync on the ACS and AD servers?
    Faisal

  • ACS Express radius authentication AD authorization

    I work at a University and for some reason we have multiple systems for authentication and authorization.  That being said I am trying to use radius to do authentication and AD for authorization for VPNs.  I have the radius authentication working against our radius server.  I have my ACS express setup to join the AD domain and everything looks good there.  I setup the AD server as a radius object in AAA server groups on my ASA.  Then I add the server below in the servers in selected groups window.  I put all the info in there and when I hit test I click authorization and put in the username that I know is in the domain group I have associated with this on the ACS.  The test fails and with authorization failed with invalid password.  When I look at the logs on the ACS I see
    01/06/2011 20:14:26 acsxp/server Warning Server 0 AD Agent Plain Text Authentication Failed for user: username@domain
    01/06/2011 20:14:26 acsxp/server Warning Server 0 Authentication for user username failed for reason = 0
    01/06/2011 20:14:26 acsxp/server Error Protocol 0 Request from 172.20.5.2: User username rejected . by RemoteServer: AD (InvalidPassword). 
    Username and domain are correct I just edited them for posting.  It seems like it is trying to authenticate rather than authorize.  All I want it to do is say yes the user is in this group or no the user is not in this group?  You can't even fill in the password when testing authorization?  Maybe I have something setup wrong on the ACS side but when I look at AD under users and identity stores, it says it is joined to the domain.  When I do AD domain diagnostics under troubleshooting everything looks good.  I have the ASA I am testing from defined as a device and in the ASA device group.  Under access services in Radius access services I have one service that I setup that connects to the AD and it found the group so I know it is connecting.  Any idea what I am doing wrong or where to look?
    Any help would be GREATLY appreciated!
    Thanks
    Joe

    Hi Joe,
    We could take a deeper look at what is happening through some logs and debugs:
    1. On ACS Express, under
    Reports & Troubleshooting > Troubleshooting > Server Logs
    please set the Express Server Trace Level to 5 and the Web Server Trace Level to 4.
    Also, for the Log Level under OS Logging, please set its value to "Debug".
    If previous old logs are not essential to you, you may also wanna delete all the log files first, so that we capture logs for the last day only.
    2. On the ASA, please enable the following debugs
    debug aaa authentication
    debug aaa authorization
    debug radius
    3. Then please first recreate a successful authentication attempt, and then recreate the authorization test issue with the same user account for which you tested the successful authentication.
    4. After the issue is recreated, please attach the debugs from the ASA and following files from the ACS Server Logs:
    acsxp_adagent.log
    acsxp_agent_server.log
    acsxp_mcd.log
    acsxp_server.log
    acsxp_server_trace.log
    Regards,
    Fede
    If  this helps you and/or answers your question please mark the question as  "answered" and/or rate it, so other users can easily find it.

  • ACS Express 5.0 - "unique authentication" what does it mean?

    Hi to all,
    the ACS Express 5.0 datasheet states: "Cisco ACS Express supports a maximum of 50 AAA clients and 350 unique user logins in a 24-hour period"
    It's clear what's the meaning of the max 50 AAA clients...in fact what is not clear is regarding the max 350 uniques user authentication.
    If I use 802.1 IBNS with PEAP-MSCHAP to do machine authenticaion each machine authentication will count as a unique logon...isn'it? What happens if there are Laptop assigned to sales which spent a lot of time out of the office???
    Each time these laptops reconnect to the network wil count as an extra logon or and increase the logon counter of one or since this laptop is already authenticated on the morning t won't count as an extra unique logon...
    My question is related to the fact that I have a customer who wanto to introduce IBNS-802.1X but have "only" 20-25 AAA clients and max. 200 users (where about 100 are laptop)...and using ACS 5.0 in a redundant way will be too expensive...
    Thanks for a reply
    Omar

    The ACS Express 5.0 Appliance is designed for a maximum of 350 users. This limit does not apply to the number of logins.
    Cisco Secure Access Control Server Express 5.0 QA
    http://www.cisco.com/en/US/prod/collateral/netmgtsw/ps5698/ps6767/ps8543/ps8724/prod_qas0900aecd806d3a4d.html
    Q. How is Cisco Secure ACS Express positioned in comparison to Cisco Secure ACS for Windows (ACS Windows) and Cisco Secure ACS Solution Engine (ACS SE)?
    A. ...Cisco Secure ACS Express is well suited for deployments that need an access control solution for fewer than 350 users and 50 devices. This product is intended to serve small to medium-sized businesses, retail sites and enterprise branch offices where customers need an easy-to-use GUI yet require a comprehensive but simple feature set and a lower price point to address their specific deployment needs.
    For a detailed feature set, please refer to the Cisco Secure ACS Express data sheet at http://www.cisco.com/go/acsexp....

  • ACS express v5.0.1 fail to join AD

    hi,
    i try to integrate my ADE 1010 appliances running on ACS express v5.0.1.1 to my DC running on window 2008 server enterprise edition SP2.
    as i fill in the info at domain configuration and test the connection, it's succeed. but once try to save and join it's failed to join the domain.
    log extract from acsxp_adagent :
    PMOACS AD-SCRIPTS: INFO AD script executed from IP: 10.169.2.100 script: /cgi/adjoindomain.pl/cgi/adjoindomain.pl args: DM=jpmosp.xxx.yy&UN=administrator&CN=OU%3DACS&PDC=jpmosp.xxx.yy&PW=******
    PMOACS AD-SCRIPTS: INFO AD join container used: OU=ACS
    PMOACS AD-SCRIPTS: INFO AD join Preferred Domain Server used: jpmosp.xxx.yy
    PMOACS AD-SCRIPTS: INFO AD join container used: OU=ACS
    PMOACS AD-SCRIPTS: INFO AD join Preferred Domain Server used: jpmosp.xxx.yy
    PMOACS AD-SCRIPTS: INFO AD join command used: /opt/CSCOacsxp/adagent/bin/adjoin -u "administrator" -p "******" -z NULL --noconf "jpmosp.xxx.yy" -s "jpmosp.xxx.yy"
    PMOACS AD-SCRIPTS: CRITICAL Unknown status returned from adjoin
    PMOACS AD-SCRIPTS: WARN --- BEGIN FILE LOG FOR /opt/CSCOacsxp/temp/adjoindata.8870 ---
    PMOACS AD-SCRIPTS: WARN Cannot resolve computer name "pmoacs" in DNS or /etc/hosts
    PMOACS AD-SCRIPTS: WARN Please edit /etc/hosts or your DNS server to set your hostname correctly
    PMOACS AD-SCRIPTS: WARN or use --name option to override this check.
    what i did on my window 2008 server:
    1. log in as the administrator, create a container name "acs", and inside of it create a computer name as "pmoacs"
    2. appliance clock is tally with AD-DC server, no time skew problem.
    what i did on my Cisco ADE 1010:
    1. initial setup only.
    thank you
    N

    Hi,
    This is the relevant error message:
    "WARN Cannot resolve computer name "pmoacs" in DNS or /etc/hosts"
    Please make sure you have the acs hostname configured on the DNS server.
    The ACS must be able to resolve its own hostname, otherwise this will fail.
    HTH,
    Tiago
    If  this helps you and/or answers your question please mark the question as  "answered" and/or rate it, so other users can easily find it.

  • Unknown CA failure on ACS express

    Hi forumers
    i try to let user access to the network authenticate using ACS express, then map to the AD server.
    somehow i get the error from the authentication report is FAILURE REASON: UNKNOWN CA
    i try and use self-singed certificate, then download the certificate, open and copy the CSR and paste to my CA server.
    I'm using Window's advance certificate request "submit a certificate request by  using a based 64-encoded CMC or PKCS#10 files..." this option.
    somehow i got this error message. (see attachment)
    Question1: is it the right way to do CSR to window CA server? am i doing it right?
    Question2: if i am wrong, any guide for a proper way doing certificate installation for ACS express in order talk to AD server?
    thanks
    Noel

    Hi,
    Actually you do not need to have a signed certificate on the ACS Express to be able to join the AD...
    However, if you still want to do it, then can you please send me the CSR? I can take a look and see if everything is ok...
    HTH,
    Tiago
    If  this helps you and/or answers your question please mark the question as  "answered" and/or rate it, so other users can easily find it.

  • ACS Express 5.0 vs ACS 5.0

    What's the difference between the two?
    - Cisco Secure ACS Express 5.0
    - Cisco Secure Access Control System 5.0

    ACS Express 5.0
    http://www.cisco.com/en/US/prod/collateral/netmgtsw/ps5698/ps6767/ps8543/ps8724/product_data_sheet0900aecd806d3b78.html
    ACS 5
    http://cisco.com/en/US/prod/collateral/netmgtsw/ps5698/ps6767/ps9911/ps9915/product_bulletin_c25-504495.html

  • Disable SSH version1 in ACS Express 5.0

    Hi,
    Does anybody knows if it is possible to disable SSH v1 in ACS express installed in ADE 1010?
    Appreciate anybody's feedback
    Thanks.
    NetMaint

    Hi,
    This was required by our client to disable SSH v1 after the infosec audit.
    Can this be done? I tried digging but can't find any info. If this can't be done at least provide me some link so I can feedback to our client.
    Appreciate your reply.
    Regards, NetMaint

  • Join acs express to active directory domain

    i have a problem joining acs express active directory domain , both are reachable to each other in the same subnet & no firewalls between them , but when i test the connectivity it gives this error:
    " required service unavailable. DNS is setup correctly , and the domain controller is reachable , however , one of the required services, such as ldap,kerberos, or global catalog service is not available. This issue may arise if there is a firewall between AD domain controller, and the ACS Express appliance"

    It is sounds like a bug CSCsw29387 Join AD domain, with one DC down fails. If the ACS Express is trying to join an AD domain in a multi domain controller environment and one of the domain controllers is down, the ACS Express will fail to join the domain.

  • Does MARS support ACS Express 5.0?

    Hi guys... Does anyone know whether MARS supports ACS Express 5.0? I tried to add the ACS Express 5.0 device but there was not this version of ACS on Reporting Applications tab of Cisco MARS.
    Thanks all.

    MARS does not support ACS Express 5.0
    Only ACS version 3.x and 4.x are supported as per the following document:
    http://www.cisco.com/en/US/docs/security/security_management/cs-mars/6.0/compatibility/local_controller/dtlc60x.html#wp75381
    Hope that helps.

  • ACS Express upgrade for native Linux OS

    I'm running ACS Express 5.0.0.18. A recent security scan flagged the ACS as running outdated versions of Apache and Tomcat, plus other issues. Will the 5.0.1.1 upgrade package perform an update on these components? If so, what will be the updated versions, given that the upgrade package is over one year old? Are there any other alternatives for bringing the OS components up to date? Any advice is appreciated.
    Regards,
    Mike

    Hi Mike,
    what are the exact vulnerabilities you're referring to?
    I ask this as there are some known issues affecting also the ACS Express version 5.0.1.1, such as the following ones:
    * CSCtg52362:
    http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCtg52362
    * CSCtg52369:
    http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCtg52369
    We don't have precise ETA for the fix yet, but you may monitor the above bugs to get notified about updates.
    In any case, you have to wait for the next patch to be out to get this fixed.
    In the meanwhile I would also recommend to mitigate the impact of those issues by preventing non-admin workstations to have access to the ACS GUI (e.g. with a firewall or ACL); in any case this is good practise as these web pages should not be reachable for non-admin staff (nor external internet users of course).
    In any case, if you need for further assistance on this, please open a TAC case, so we can verify this in more details.
    Thanks!
    Regards,
    Federico
    If this answers your question please mark the question as "answered" and rate it, so other users can easily find it.

  • Joining ACS express to AD

    Hi all,
    I'm trying to join an ACS express (5.0) to AD. Communication between ACS and AD DCs is correct, but when trying to join the domain I get the following warning:
    1.  Saved settings, but error in joining domain. Error: Domain Controller not reachable by name. DNS is setup correctly, however the domain controller is not reachable via the name that is in DNS. This can be caused by the domain controller being unavailable. It may also be caused by the DNS domain name not matching between the AD domain controller and ACS Express appliance.
    I have verified that the domain controller is reachable by name, and actually in the logs I can see that at some point the ACS tries to create the computer name in the location specified:
    Sep 6 16:28:59 IRMXACSE adjoin[14632]: DEBUG base.bind.ldap xxxxxx.mx.hdi.com:389 fetch dn="<WKGUID=aa312825768811d1aded00c04fd8d5cd,DC=mx,DC=hdi,DC=com>" filter="(objectclass=*)"     (erased name)
    ACS tries to create a zone, but at some point the following error message appears:Sep 6 16:28:59 IRMXACSE adjoin[14632]: DEBUG base.osutil GSSKerberos::initSecurityContext - gss_init_sec_context failed (reference ../smb/utils/gsskerberos.cpp:177 rc: -1765328377)
    At that point, the binding fails and ACS fails to join the domain.
    Any help is highly appreciated,
    Thanks!!!

    That error resolves to KRB5KDC_ERR_S_PRINCIPAL_UNKNOWN   (-1765328377L). Usually, this is due to either
    a missing Service Principal name for AD account or the SPN not being recognized by KDC.  Can you double-check
    that it's in a host/domain.name format?
    Also, what OS is on the DC you're using?  We've seen this error with 2008 DCs and Express 5.0, which was
    resolved by upgrading to 5.0.1.

  • ACS Express selection rules

    Hi
    Have anyone experience about the selection rule?
    My problem is:
    I've two policy against the same group device:
    One use active dir database and PEAP method and the second use local database and eap fast (wifi phone)
    How I can discriminate the authentication because if I connect in peap and the first polici is for peap work fine but the wifi phone does not work.
    If I put the first policy for eap-fast the wifi phone work fine but the peap device doesn'work.
    I thin that the problem is to identify the correct attribute but I'm not able to do.
    thanks a lot

    You may want to use the Network Access Profile (NAP) feature on ACS, which was introduced starting from version 4.0
    Regards,
    Prem
    Please rate if it helps!

  • Problem setting up selection rule in ACS Express 5.0

    Hello,
    When creating a Radius access service and then clicking on selection rules and trying to add a device group
    I get this error:
    An error has ocurred.  please see below:
    1. entry has been modified or deleted by another session.  click on cancel or navigation item
    on the left to refresh content.
    Could there be something I missed before trying to create the access service.  I already had set up the external database and added the device to the device group, but every time I try to add the access service I get this error message.
    Thanks in advance,
    Regards,
    Alex

    At any point did you try to restart the services or did you access this option but then try from another machine? It could be that something has this paged locked and the best thing to do is to restart the services and try again. You can restart the services by accessing the console and trying these commands.
    application stop acsexpress
    application start acsexpress
    thanks,
    Tarik

  • VLAN assignment from ACS not applied

    WLC 4402 5.2.157.0
    ACS Express 5.0.0.18
    We have an issue where the VLAN assigned on the ACS isn't applied on the 4402 WLC.
    We have 'Allow AAA Override' checked on the WLAN, the QoS is overridden to bronze properly, but the VLAN stays at 0 and the interface at management. The VLAN interface is configured on the WLC.
    On the ACS the following are configured for the RADIUS response:
    Radius-IETF Tunnel-Medium-Type 802
    Radius-IETF Tunnel-Type VLAN
    Radius-IETF Tunnel-Private-Group-ID 44
    Cisco Airespace Airespace-QoS-Level Bronze
    The accounting log shows:
    Wed, 04 Feb 2009 09:50:02
    User-Name = guest
    NAS-IP-Address = 10.30.1.2
    NAS-Port = 1
    Framed-IP-Address = 10.30.1.12
    Called-Station-Id = 10.30.1.2
    Calling-Station-Id = 10.30.1.12
    NAS-Identifier = Cisco4402WLC
    Acct-Status-Type = Start
    Acct-Session-Id = 4989b927/00:1a:73:ed:bf:ca/2
    Acct-Authentic = RADIUS
    Airespace-WLAN-Id = 2
    Thanks for any help or advice you can provide to troubleshoot this issue.
    -Brian

    From the Clients -> Details screen on the WLC...
    CLIENT PROPERTIES
    MAC Address 00:1a:73:ed:bf:ca
    IP Address 10.30.1.12
    Client Type Regular
    User Name guest
    Port Number 1
    Interface management
    VLAN ID 0
    CCX Version CCXv4
    E2E Version Not Supported
    Mobility Role Local
    Mobility Peer IP Address N/A
    Policy Manager State RUN
    Mirror Mode Disable
    Management Frame Protection No
    SECURITY INFORMATION
    Security Policy Completed Yes
    Policy Type N/A
    Encryption Cipher None
    EAP Type N/A
    NAC State Access
    QUALITY OF SERVICE PROPERTIES
    WMM State Enabled
    U-APSD Support Disabled
    QoS Level Bronze
    Diff Serv Code Point (DSCP) disabled
    802.1p Tag disabled
    Average Data Rate disabled
    Average Real-Time Rate disabled
    Burst Data Rate disabled
    Burst Real-Time Rate disabled

Maybe you are looking for