Acs for windows doesnt work with w2k8

Hi Folks
I have win 2008 server as DC,
i have installed acs 4.2 on menber server (win 2003) , but it doesn't work, how to let this one work , any patch for that
thanks

Hi,
Inorder to support windows 2008 you need ACS 4.2.0.124 patch 4.
http://www.cisco.com/en/US/docs/net_mgmt/cisco_secure_access_control_server_for_windows/4.2/release/notes/ACS42_RN.html
If you have a windows 2k8 R2 as DC, then you need an ACS 5.2
http://www.cisco.com/en/US/docs/net_mgmt/cisco_secure_access_control_server_for_windows/4.2.1/Installation_Guide/windows/install.html#wp1041324
Hope this helps..
Regards,
Anisha
P.S.: please mark this thread as answered if you feel your query is resolved. Do rate helpful posts.

Similar Messages

  • ICloud for Windows stopped working with recent update

    I had been using iCloud for Windows (Windows 7 64 bit) version 4.0.3.56.  I received a notification that there was an update and so I accepted the update (by mistake). It updated to version 4.0.5.20.  As soon as the update ran, and I tried to use the icloud Control Panel to set up the syncing of my mail and contacts I ran into trouble. I received the dreaded "Your setup couldn't be started because of an unexpected error."
    I tried to restore my pc to a previous restore point, but, that didn't work.  So, I completely deleted the icloud software, rebooted, and downloaded the new version and reinstalled it.  That didn't work either.  Now, I am completely unable to sync my outlook 2007 calendar with my icloud.
    I called Apple support and was told "Tech is working in it."  I would like to know when there will be a fix... I'm sort of hosed trying to keep track of multiple calendars without being about to use my outlook that I also use for business.

    i wanted to add that I had been using 4.0.3.56 for 1 1/2 years flawlessly.

  • Replication issues with ACS for Windows 3.3.3 build 11

    I have built two ACS for Windows servers on Windows 2003 SP1. The AD environment is Windows 2003 SP1 as well. I have configured the two ACS servers on each box. However, when I go to replicate from box A to box B, the following error appears:
    Inbound database replication from ACS 'acsradius.asu.edu' denied - shared secret mismatch
    I have double checked the shared secret keys on both servers in the Network Configuration AAA servers section. Any idea what the issue is?
    Thanks.

    Do not run replication to a server installed on Windows 2003. Due to changes in the way Win2003 handles registry changes, each change can take up to 100 times longer and replication can fail and the server hang.

  • ACs For Windows 4.1.(1) build 23

    Hi.
    We´ve got two Windows 2003 Server R2 machines, with installed Cisco ACS For Windows 4.1.(1) Build 23 used for RADIUS users authentication and now days we´re trying to deploy now a TACACS+ configuration to the network device manage now from those ACSs, TACACS+ Accounting tab works fine, but the Accounting administration records or logs are updated but when I click on the TACACS+ Administration Tab the showed log files are empty, I knew about a bug in the 4.1 versión, the question is?
    Can I fix the issue if I upgrade or install only the 4.1.1.23-5 patch?
    It´ll be enough?
    Many thanks.

    Hi.
    We´ve got two Windows 2003 Server R2 machines, with installed Cisco ACS For Windows 4.1.(1) Build 23 used for RADIUS users authentication and now days we´re trying to deploy now a TACACS+ configuration to the network device manage now from those ACSs, TACACS+ Accounting tab works fine, but the Accounting administration records or logs are updated but when I click on the TACACS+ Administration Tab the showed log files are empty, I knew about a bug in the 4.1 versión, the question is?
    Can I fix the issue if I upgrade or install only the 4.1.1.23-5 patch?
    It´ll be enough?
    Many thanks.

  • Seagate 1.5TB doesnt work with mac

    hi, i have a seagate external hard drive 1.5 TB, i generally use it for my windows laptop. now i bought a mac and it doesnt work with my mac. Am i doing some thing wrong..?

    Are you planning on using the drive with Windows? If no, then use Disk Utility in Applications/Utilities to reformat the drive. Formatting erases contents on a drive. Copy the data to another source before formatting.
    Format the external drive as Mac OS Extended (Journaled) - Partition Map Scheme: GUID
    Select Drive (top name) then click on Erase tab.
    Under Format select Mac OS Extended (Journaled)
    This should format as GUID when erasing but sometimes you need to click on an Advanced tab and select GUID.
    If you do plan on using the drive with Windows machine, format on Windows machine as exFAT.

  • Cmss 3d doesnt work with dolby digital live pack

    0cmss 3d doesnt work with dolby digital li've pack4 From the page of Dobly Digital Li've pack
    "Stereo content (MP3, WMA, CD audio or games) that is transformed into 5. surround sound using Creative CMSS-3D or DTS Neo:PC can also benefit from this encoding scheme that will further enhance the entertainment value of your Sound Blaster X-Fi."
    with that said, i bought the pack that has both DDL and DTS Interacti've. but while playing music my reciever only gets front left and right channels. No sound comes from the center or rear channels. This is with CMSS 3D on. With analog all 5 speakers work. Before installing this pack, my reciever got PCM input from the optical line. Thus only the front channels working. now with this pack the speaker recognises that the signal is Dolby or DTS yet, only the front channels work. in short there is no difference with this pack.
    could someone please explain to me how to get the whole 5. working with Dolby or DTS
    thank you
    Sound Blaster X-Fi Platinum, Driver 2.8.003
    Windows 7 x64 Build 700

    thank you for the promp reply
    the problem was with the reciever. just a change in setting was all it took
    but now i have anoter problem
    how do i bypass dolby and dts signals from movies to my reciever
    before i simply had to set spdif out as default sound device and set ac3filter to spdif passthru
    now the driver panel tells me that SPDIFOut will be exclusvely be used by DTS Interactiv. it doesnt pass the signal through from Media player classic or powerdvd.
    am i expected to turn off DTS Interacti've or DDL when watching a movie and needing to pass on the signal?

  • Steadyshot stabilization for video doesnt work since Lollipop update. HELP!

    Where should I send information about SERIOUS issue of new Lollipop on XPERIA Z3? Since last update from Kitkat the SteadyShot stabilization for video doesnt work (intelligent mode works standard). Previously great videos are now shaky and simply ugly. Please SONY make something with that on next update. Probably Ill have to sell my Z3 if there will be no patch. Im filmaker who needs good video quality in his smartphone.

    i tried both...still inteligent works as standar what means stabilization is very poor...here more info about that lollipop bug found on the net http://forum.xda-developers.com/z3-compact/help/steadyshot-intelligent-active-gone-t3106177

  • I book doesnt work with power cord only

    Hello. I was just using my ibook g4 and shut it down. When i tried to turn it back on it worked for about 5 minutes then it shut off. I tried taking out the battery and holding down the power button for 5 seconds among other things. I gave up and borrowed a friends battery, he has the same model as me and that battery doesnt work either. I tried just using the power cord only and that doesnt work either. Do i need to take it in to a professional? I've tried just about everything.

    Hey Caesar and Welcome to Apple Discussions,
    So your header reads:
    "i book doesnt work with power cord only "
    Is that right? Will it run only on the battery?
    If so this is from the manual:
    "The computer runs with battery, but not with the power adapter plugged into
    wall outlet
    1. Try known-good power outlet.
    2. Try known-good power adapter and power cord.
    Note:
    Verify that power adapter connector glows amber or green. If the power
    adapter light is green, turn over the computer and press the battery button. The
    battery lights should glow green and stay on if the power adapter is operating
    correctly.
    3. Reset the power manager by pressing the key combination Control-Option-Shiftpower.
    Warning: Make sure you do not hold down the "fn" key when resetting the
    power manager.
    Warning: Resetting the power manager means you will also need to reset the
    date and time (using the Date & Time control panel).
    4. Replace DC board.
    5. Replace logic board."
    and it would help to know exactly which iBook you have but this is pretty generic.
    Richard

  • Can Appliance 1113/1120 running ACS 4.1 replicate to ACS for Windows 4.2.1.15.2

    Anyone tested/tried to replication from ACS 4.1 (running on Appliance) to ACS for Windows 4.2(1)?

    Hi ,
    For replication to work between the two acs they should be on same version and patch level.
    Thanks
    Waris Hussain.

  • Password History Validation - ACS for Windows 4.2.x

    Hello,
    I'm evaluating the Secure ACS for Windows v4.2 platform against PCI DSS v2.0, specifically the "Implement Strong Access Control Measures" section.
    We currently run version 4.0(1) Build 27 and use local user and password management.
    For a variety of reasons I'd prefer to maintain this approach rather than pursue integration with an external identity store such as AD, but I need to know whether or not the in-bult password validation options are stringent enough to meet all of the relevant requirements.
    I believe from the research I've done so far that version 4.2.x should meet the majority, but there is one in partiuclar about validation of previously used passwords that I'm still unclear on.
    In the "Local Password Management" section of the ACS 4.2.1 User Guide (Text Part Number: OL-20208-01) it states that the password validation options include "Password is different from the previous value".
    The PCI standard states: "Do not allow an individual to submit a new password that is the same as any of the last four passwords he or she has used."
    Q) How many previous passwords is the newly submitted password validated against? Is it just the last one or will it check against more? Is there any way to configure how many it checks against?
    Any help or guidance very much appreciated.
    Cheers,
    Nick

    Hi Lomon,
    After login in to ACS application. You can click on the Cisco logo on top left... You can find the patch version.please refer the below screen shot.
    Please do rate if the given information helps.
    By
    Karthik

  • Graphics drivers for windows 7 compatible with hp notebook pc 500

    iplz recommend me graphics drivers for windows 7 compatible with hp notebook pc 500

    Hi:
    Download and run this driver.  You will probably get an unsupported operating system error.
    http://h20565.www2.hp.com/hpsc/swd/public/detail?s​p4ts.oid=447304&swItemId=ob_47264_1&swEnvOid=2096
    Close out of any error windows.
    Go to the device manager and click on the video controller needing drivers.
    Click on the driver tab.  Click on update driver.  Select the Browse my computer for driver software option and browse to the driver folder that was created when you ran the file.
    That folder will be located in C:\SWSetup\sp34749.
    Make sure the Include Subfolders box is checked and the driver should install.
    Reboot and your graphics should be working normally.
    You will not have Windows aero because the Intel GMA 900 graphics adapter is not 100% Vista or W7 capable but at least you will be able to change the screen resolution and have graphics acceleration enabled.

  • Time capsule doesnt work with telia bredband no wifi

    Time capsule doesnt work with telia bredband no wifi.  Time capsule and its wifi worked in the beginning, but now it doesnt. I have tried everything without success.

    There is no question.. so if it is a statement of resignation.. then if under warranty and faulty Apple will fix it/replace it.. if not dead you will be given it back.
    Are you using Lion? If so did you download 5.6 airport utility?
    Plug the TC into a computer by ethernet.. hold in reset for 10sec.. and then redo the setup.
    Give TC and wireless short names and no spaces and no special characters.. lock the wireless to manual a/n-b/g and fix the channels.
    Then if it doesn't work most likely faulty. Otherwise it is just setup is wrong.

  • ACS for Windows vs ACS Appliance?

    First, the only thing I saw on the Appliance was that it was a 'hardened OS'. So I'm assuming like many of their other appliances that this is Windows 2003 locked down? Regardless if it is or not, are there any issues with the appliance being in a mixed environment with ACS for Windows and replication between the two?
    Thanks,
    Raun

    http://www.cisco.com/en/US/docs/net_mgmt/cisco_secure_access_control_server_for_solution_engine/4.2/installation/guide/remote_agent/rawo.html
    When you use ACS for Windows, you install it on a member server, which can "relay" the auth requests to the domain controllers.
    ACS SE's are not a member in the domain, therefore you need to install the remote agent on a member/DC, so that it would act as a "relay agent" for the auth requests.
    You'll also need to manually create a workstation account in AD to allow auth requests from the ACS SE's.
    The default name used is "CISCO", but it can be defined differently.
    For this part, see
    http://www.cisco.com/en/US/docs/net_mgmt/cisco_secure_access_control_server_for_solution_engine/4.2/installation/guide/remote_agent/rawi.html#wp311476

  • Does Windows 7 work with an Airport Extreme. Mine does not recognize it

    Does Windows 7 work with an Airport Extreme. I can't get mine to connect with it? The package insert says it only works with XP or Vista

    This should help:
    http://docs.info.apple.com/article.html?artnum=86258
    Use system profiler to identify which iMac you have
    exactly. If your iMac has USB 2.0, then I think you
    can only fit Airport Extreme anyway.
    I have a question too ... I'm about to fit an Airport
    Extreme extreme card to my 15 inch USB 2.0 iMac too.
    Is the aerial already built in? I presume one is
    required in some form?
    James--I'm afraid that your link doesn't help me. I'd already seen that, and found that my iMac seems to correspond to two different categories--being both a 17-inch flat panel, and a 17-inch 1GHz. According to Duane's post, iMacs with clock speeds of 1 GHz or greater take the Airport Extreme card. According to two different individuals at a local Apple Store, I got two answers. One said Extreme, the other said, nope, the old Airport. How do I determine the "for sure" answer? Anybody know?
    FWIW, here's my sys profile info:
    Hardware Overview:
    Machine Model: iMac
    CPU Type: PowerPC G4 (3.3)
    Number Of CPUs: 1
    CPU Speed: 1 GHz
    L2 Cache (per CPU): 256 KB
    Memory: 512 MB
    Bus Speed: 133 MHz
    Boot ROM Version: 4.5.8f1
    Serial Number: QT3050UCNHX
    Thanks any and all for help.

  • Does the 2.1 web policy agent for Windows 2003 work on a 64 bit OS ?

    Does the 2.1 web policy agent for Windows 2003 work on a 64 bit OS ?
    I have a customer having a world of issues getting the agent to start.
    Jeff Courtade

    No. 64bit support is not there for 2.1 agents on Windows.
    -Subba

Maybe you are looking for