ACS PROBLEM FOR CERTIFICATE ISSUE

Hi all
I have an ACS(Access controller server)installed for PEAP authentication.I have installed in 5 different location.But sometimes we need to install the certificate again.Then only it start
working.Some ACS will work properly.What could be the reason.Did any one faced this problem.

Did you happen to install patches on the server? I seen this issue when patches get installed...

Similar Messages

Checklist for Exchange Certificate issues

Checklist for Exchange Certificate issues
1.
Why certificate is important for Exchange and What are Certificates used for
Exchange is now using certificates for more than just web, POP3, or IMAP. In addition to
securing web services, it has also incorporated Transport Layer Security (TLS) for session based authentication and encryption.
Certificates are used for several things on Exchange Server. Most customers also use certificates
on more than one Exchange server. In general, the fewer certificates you have, the easier certificate management becomes.
IIS (OWA, ECP, EWS, EAS, OA, Autodiscover, OAB, UM)
POP/IMAP
SMTP
2.
Common symptoms for
certificate issue
Here we can see three different types of the certificate warning, mainly from the Outlook
side.
a.
Certificate mismatch issue
b.
Certificate trust issue
c.
Certificate expiration issue
3.
Checklists
In this section, checklists will be provided according to the three different scenarios:
Certificate Mismatch Issue
[Analysis]:
This issue mainly occurs because the URL of the web services Outlook tries
to connect does not match the host name in the certificate.
[Checklist]:
Firstly make sure how many host name in your certificate the certificate. Run “Get-ExchangeCertificate | select certificatedomain”.
Secondly, check the web services URLs which Outlook are trying to connect to. Run “Test Email AutoConfiguration”
In this scenario, you need to check the host name for the following services:
Autodiscover
EWS
OAB
ECP
UM
If any of the urls above does not match the one in the certificate, refer to the following article to change
it via EMS:
http://support.microsoft.com/kb/940726
1.
Do not forget to restart the IIS service after applying the changes above.
2. Make sure a valid certificate is enabled on the IIS service.
Certificate Trust Issue
[Analysis]:
For the self-signed and PKI-based (Enterprise)
certificates, they are not automatically trusted by the client computer or mobile device, you must make sure that you import the certificate into the trusted root certificate store on client computers and devices. On the other hand, Third-party or commercial
certificates do not have this problem. Most commercial CA certificates are already trusted because the certificate already resides in the trusted root certificate store. Because the issuer is trusted, the certificate is also trusted. Using third-party certificates
greatly simplifies deployment.
[Checklist]:
If it’s an Enterprise CA certificate, manually install the root certificate to the “Trusted Root Certification Authorities” folder:
If it is a 3<sup>rd</sup>-party certificate, first remove and reinstall the certificate. Check whether the Windows Certificate Store on the local
client is corrupted. If it still does not work, please contact the third-party CA support to verify the certificate.
Certificate Expiration Issue
[Checklist]:
When a certificate is about to expired, we just need to renew it by referring the following article:
Renew an Exchange Certificate
http://technet.microsoft.com/en-us/library/ee332322(v=exchg.141).aspx
To avoid any conflictions, it’s recommended to remove the expired certificate from the certificate store.
[How to set a reminder to alert the administrator when a certificate is about to expired]:
It’s easy to fix the certificate expire issue. But it should be more important to set a reminder before the
certificate expiration. Or there can be a large user impacts.
Generally, the Event ID “^(24|25)$” will appear in Application log when a certificate is about to expire.
If it’s not quite visible, we can refer to the following solution:
http://blogs.technet.com/b/nexthop/archive/2011/11/18/certificate-expiration-alerting.aspx
OWA certificate revoked issue
[Analysis]:
IE
includes support for server certificate revocation which verifies that an issuing
CA has not revoked a server certificate. This feature checks for CryptoAPI revocation when certificate extensions
are present. If the URL for the revocation information is unresponsive, IE cancels the connection.
[Solution or workaround]:
1. Contact CA provider and check whether the questioned certificate is in the Revoked List.
2. If not, check whether the certificate has a private key.
3. Remove the old certificate and import the new one.
Workaround:
IE Internet Options -> Advanced tab -> Clear the "Check for server certificate revocation"
checkbox.
4.
More References
Digital Certificates and SSL
http://technet.microsoft.com/en-us/library/dd351044(v=exchg.150).aspx
More on Exchange 2007 and certificates - with real world scenario
http://blogs.technet.com/b/exchange/archive/2007/07/02/3403301.aspx

(Reported previous post with link to SIS package to moderator)
This is not the correct SIS package for the N73. The package shown is for S60 3.2 devices, but the N73 is not S60 3.2, I believe it is S60 3.0.
Most features may work with this SIS, but if you experience strange problems, try using the S60 3.0 version.
But there are no significant difference between 2.5.3 and 2.5.5 with regard to attachments. The only changes were with localization (languages).
At this point, try 2.7.0 which is out now:
http://businesssoftware.nokia.com/mail_for_exchange_downloads.php
Make sure to pick the right phone on the drop down list. It does matter! There are 4 different packages. This list makes sure you get the right one.
I have seen some issues with attachments not completing that seem to be carrier dependent. You can test this my using Wifi (if possible).
Message Edited by m4e_team_k on 28-Sep-2008 12:25 AM

Security certificate issue for Provider Hosted App (SP Online)

Hi all,
I am having a hard time with SP Online debugging a basic provider hosted app.
Steps I have taken to create the app:
created a new provider hosted app in Visual Studio 2013 and setting my SP Online debugging site (wich works perfectly for SP hosted apps).
Chose Azure ACS option, although I do not have an Azure account
When I deploy the app I get to the page on my debugging site where I must choose "Trust It", but when I do I get the message that the Connection is Unsecure/unsafe:
How can I fix this? Do I need to create an Azure account for debugging purposes already? Or is there another way to solve the problem?

Hi,
I understand that you get Security certificate issue for Provider Hosted App (SP Online).
Per my knowledge, you need to create an Azure account for debugging purposes.
To create a SharePoint 2013 app for Office 365 and publish it to an Azure web site, you can refer to:
http://blogs.msdn.com/b/kaevans/archive/2014/02/24/creating-a-sharepoint-2013-app-with-azure-web-sites.aspx
Best Regards,
Linda Li
Linda Li
TechNet Community Support

Cisco Jabber for Windows Certificate Issues

Hi,
I have configured a Cisco Jabber with device security mode "Encrypted". Once I use this mode I am getting a error message in Cisco Jabber as:
"The certificate enrollment for secure computer calling has not been activated. Contact your system administrator."
The softphone feature is not working because of this.
Do you have any fix for this issue?
Thanks,
VJ

Hi Jonathan,
I have one more issue with Cisco Jabber using authentication string. The authentication string works fine with the Jabber and softphone functionality is working.
Now the problem is: if the single user has two Jabber clients, one installed on laptop and second on desktop, the authentication string window is presented to the jabber client which logs in first. For example is I login from my laptop the window pops up to enter the authentication string. But now when I open the Jabber on my desktop it doesn't give me option to enter the authentication string and the softphone doesn't work.
Thanks,
Vaijanath

Certificates issued by communications server for client authentication

Hi,
we ran into problem with those certificates, that are being issued by the lync server itself. In our enteprise we have CX600 and CX3000 phones, and i know that certificate authentication is required for the phones to work (both for registrar and webservice).
However, now that users have lync installed, they have their communications server certificate assigned as well. The problem is when a user needs to sign a document with the certificate from our private CA, for most of the users, word or excel suggests to
use a certificate issued by communications server, not our ent CA. Maybe there is a way for LYNC to trust private enteprise CA and not give out its own certificates and STILL use certificate authentication?
Thanks!

Facing almost the same issue, Lync (server) issues ClientAuth certs from "Communication Server", (btw
is not trusted of course), and in turns forces users to make a selection of which VPN cert to use when dialing in, instead of only one ClientAuth cert installed, they now have 2 ClientAuth certs installed, which our internal CA's should care about and NOT
the Lync (server).
Don’t get how an MS product of this caliber can be built without proper PKI integration, how can it NOT utilize internally issued certs for client authentication???
Not the first though, SCCM and OSD is another example....
However, are you saying that Lync communication can’t be used without certificate authentication,
without the user being spammed with credential prompts?
Trying to get clarification on this…

When i try to activate iMessage i could see the comment "waiting for activation" for more than 24hrs.Is this because of mobile device problem or someother issue ? My mobile is just 20 days old

When i try to activate iMessage i could see the comment "waiting for activation" for more than 24hrs.
Is this because of mobile device problem or someother issue ?
My mobile is just 20 days old

The following discusses that error message and may help: iOS: Troubleshooting FaceTime and iMessage activation

I heard that there was a problem with Apple being vulnerable to Hackers. Has anyone seen an update for this issue? My IPad received the update last night but I have not seen anything for Safari.

I heard that there was a problem with Apple being vulnerable to Hackers. Has anyone seen an update for this issue? My IPad received the update last night but I have not seen anything for Safari.

Mac OS X 10.9.2 was released today for this issue and others. Earlier versions are not affected.
See this Apple article - http://support.apple.com/kb/HT6114
You can use the Mac app store to do the update or download it directly from here - http://support.apple.com/kb/DL1725
Best of luck.

Sir since update of ios 8.1.2 i got serious battery problem on 3g 4.30 hrs my battery gets low and sometimes serious net probelms please give an update for this issue its not alone me my friends too getting many problem lcommonly battery problem

sir since update of ios 8.1.2 i got serious battery problem on 3g 4.30 hrs my battery gets low and sometimes serious net probelms please give an update for this issue its not alone me my friends too getting many problem commonly battery problem please can this be resolved
its not related to any hardware because last year april i got replacement new phone from apple and i maintained it well...!

Probably apps running in the background are causing this, sometimes Mail get's stuck connecting to the mail server, or some social media app like Facebook can also be a reason for prolonged background activity.
Try to reset the phone by holding the sleep and home button for about 10sec, until the Apple logo comes back again. You will not lose any data by resetting, but it can cure some glitches.
If this does not help, setting it up as new device would be the next step:
How to erase your iOS device and then set it up as a new device or restore it from backups
Also take a look at these tips to prolong the battery life again:
http://www.overthought.org/blog/2014/the-ultimate-guide-to-solving-ios-battery-d rain

Is July 9 internet issue a problem for Mac Pro users?

Is the July 9 internet issue a problem for Mac Pro users or has Apple taken care of this issue in updates?

It is a only a problem for users affected by the malware that replaces their DNS IPs on their macs. They already have a serious problem which they should fix. Follow the url in sig's post to determine if you are infected and how to remove it.

When accessing Intranet sites that use SSL Certificates issued by our internal PKI, FF for Windows give an error of "improperly formatted DER-encoded message"

When accessing Intranet sites with that have SSL Certificates issued by our internal PKI, FF for Windows gives an error messsage - An error occurred during a connection to myshaw. security library: improperly formatted DER-encoded message. (Error code: sec_error_bad_der)
Chrome and IE work fine. This is a new PKI using the SHA-2 signature algorithm.

Hi Guigs2,
From the other post you link too, I can confirm that both the Root and Subordinate CA have been commissioned with the:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\CertSvc\Configuration\IssuingCA\CSP\AlternateSignatureAlgorithm = 1
registry key set. As can be seen above, the Signature algorithm on an issued certificate is RSASSA-PSS. This is been Microsoft suggested deployment IF you do not wish to support either XP or Windows 2003 machine and lower. In fact, I believe the option has been around since Windows 2008, however, there were of course, a lot more XP machines back then.
The obvious answer is that we would like to maintain the updated algorithm, AND see support for it added for Firefox. I think you will see a LOT more posts like this as people deploy more 2012 PKI infrastructure supporting only Windows 7 and up. Heavens, we may well be forced to Chrome or even back to IE!!! Whilst I do not what to necessary open up other potential vulnerabilities, for the sake of testing, what do you mean by disabling mozilla:pkix?

Configure Windows Server Essentials (2012R2) "Identified problem": "Certificate Issuer is installed on this server" stops the configuration

On a server 2012R2 Essentials when trying to install the essentials experience the first install works ok but the configuration allways stops with the message "Certificate Issuer is installed on this server" and no way to continue the configuration.
Windows/Logs/CBS/
2014-07-24 21:10:04, Info CBS TI: --- Initializing Trusted Installer ---
2014-07-24 21:10:04, Info CBS TI: Last boot time: 2014-07-24 18:36:03.489
2014-07-24 21:10:04, Info CBS Starting TrustedInstaller initialization.
2014-07-24 21:10:04, Info CBS Ending TrustedInstaller initialization.
2014-07-24 21:10:04, Info CBS Starting the TrustedInstaller main loop.
2014-07-24 21:10:04, Info CBS TrustedInstaller service starts successfully.
2014-07-24 21:10:04, Info CBS No startup processing required, TrustedInstaller service was not set as autostart
2014-07-24 21:10:04, Info CBS Startup processing thread terminated normally
2014-07-24 21:10:04, Info CBS Starting TiWorker initialization.
2014-07-24 21:10:04, Info CBS Ending TiWorker initialization.
2014-07-24 21:10:04, Info CBS Starting the TiWorker main loop.
2014-07-24 21:10:04, Info CBS TiWorker starts successfully.
2014-07-24 21:10:04, Info CBS Universal Time is: 2014-07-24 19:10:04.379
2014-07-24 21:10:04, Info CBS Loaded Servicing Stack v6.3.9600.17200 with Core: C:\Windows\winsxs\amd64_microsoft-windows-servicingstack_31bf3856ad364e35_6.3.9600.17200_none_fa7026dd9b04586e\cbscore.dll
2014-07-24 21:10:04, Info CSI 00000001@2014/7/24:19:10:04.379 WcpInitialize (wcp.dll version 0.0.0.6) called (stack @0x7ffd2cb360e5 @0x7ffd2de92e53 @0x7ffd2de924ac @0x7ff60b37d2df @0x7ff60b37d9e4
@0x7ffd588d2385)
2014-07-24 21:10:04, Info CBS Could not load SrClient DLL from path: SrClient.dll. Continuing without system restore points.
2014-07-24 21:10:04, Info CBS SQM: Initializing online with Windows opt-in: True
2014-07-24 21:10:04, Info CBS SQM: Cleaning up report files older than 10 days.
2014-07-24 21:10:04, Info CBS SQM: Requesting upload of all unsent reports.
2014-07-24 21:10:04, Info CBS SQM: Queued 0 file(s) for upload with pattern: C:\Windows\servicing\sqm\*_std.sqm, flags: 0x2
2014-07-24 21:10:04, Info CBS SQM: Queued 0 file(s) for upload with pattern: C:\Windows\servicing\sqm\*_all.sqm, flags: 0x6
2014-07-24 21:10:04, Info CBS NonStart: Set pending store consistency check.
2014-07-24 21:10:04, Info CBS Session: 30386034_3758808251 initialized by client WinMgmt.
2014-07-24 21:10:04, Info CBS Enumerating Foundation package: Microsoft-Windows-ServerCore-Package~31bf3856ad364e35~amd64~~6.3.9600.16384, this could be slow
2014-07-24 21:10:05, Info CSI 00000002 IAdvancedInstallerAwareStore_ResolvePendingTransactions (call 1) (flags = 00000004, progress = NULL, phase = 0, pdwDisposition = @0x172dbed940
2014-07-24 21:10:05, Info CSI 00000003 Creating NT transaction (seq 1), objectname [6]"(null)"
2014-07-24 21:10:05, Info CSI 00000004 Created NT transaction (seq 1) result 0x00000000, handle @0x25c
2014-07-24 21:10:08, Info CSI 00000005 Poqexec successfully registered in [ml:26{13},l:24{12}]"SetupExecute"
2014-07-24 21:10:08, Info CSI 00000006@2014/7/24:19:10:08.151 Beginning NT transaction commit...
2014-07-24 21:10:08, Info CSI 00000007@2014/7/24:19:10:08.182 CSI perf trace:
CSIPERF:TXCOMMIT;32854
2014-07-24 21:10:08, Info CSI 00000008 CSI Store 99552754976 (0x000000172dce7d20) initialized
2014-07-24 21:10:08, Info CSI 00000009@2014/7/24:19:10:08.182 CSI Transaction @0x172e9bcaa0 initialized for deployment engine {d16d444c-56d8-11d5-882d-0080c847b195} with flags 00000002
and client id [26]"TI5.30386034_3758808251:1/"
2014-07-24 21:10:08, Info CSI 0000000a@2014/7/24:19:10:08.182 CSI Transaction @0x172e9bcaa0 destroyed
2014-07-24 21:10:19, Info CBS Session: 30386012_3156824848 initialized by client DISM Package Manager Provider.
2014-07-24 21:12:19, Info CBS Trusted Installer is shutting down because: SHUTDOWN_REASON_AUTOSTOP
2014-07-24 21:12:19, Info CBS TiWorker signaled for shutdown, going to exit.
2014-07-24 21:12:19, Info CBS Ending the TiWorker main loop.
2014-07-24 21:12:19, Info CBS Starting TiWorker finalization.
2014-07-24 21:12:19, Info CBS Ending the TrustedInstaller main loop.
2014-07-24 21:12:19, Info CBS Starting TrustedInstaller finalization.
2014-07-24 21:12:19, Info CBS Ending TrustedInstaller finalization.
2014-07-24 21:12:20, Info CBS Ending TiWorker finalization.
Any ideas?
//Christer

Hi Justin!
nltest /server:"servername" /sc_reset:"domaninname" returns: "I_NetLogonControl failed: Status = 1355 0x54b ERROR_NO_SUCH_DOMAIN"
Dcdiag /q returns : An error occurred. EventID: 0xC0001B77
The text log was not small enough to post here..
Regards.
Christer
Can not find anything directly related in windows-logs but here is the latest log from CBS folder..
2014-07-28 11:04:25, Info CSI 00000888 [DIRSD OWNER WARNING] Directory [ml:520{260},l:118{59}]"\??\C:\Windows\Inf\Windows Workflow Foundation 3.0.0.0\041D" is not owned but specifies
SDDL in component Microsoft-Windows-WWFCoreComp.Resources, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture = [l:10{5}]"sv-se", VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral
2014-07-28 11:04:25, Info CSI 00000889 [DIRSD OWNER WARNING] Directory [ml:128{64},l:126{63}]"\??\C:\Windows\SysWOW64\WindowsPowerShell\v1.0\Modules\MsDtc\en" is not owned but specifies
SDDL in component Microsoft.Dtc.PowerShell.Non_msil.Resources, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture = [l:10{5}]"en-US", VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral
2014-07-28 11:04:28, Info CSI 0000088a [DIRSD OWNER WARNING] Directory [ml:134{67},l:132{66}]"\??\C:\Windows\SysWOW64\WindowsPowerShell\v1.0\Modules\MsDtc\en-US" is not owned but specifies
SDDL in component Microsoft.Dtc.PowerShell.Scripts.Resources, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture = [l:10{5}]"en-US", VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral
2014-07-28 11:04:28, Info CSI 0000088b [DIRSD OWNER WARNING] Directory [ml:520{260},l:134{67}]"\??\C:\Program Files (x86)\Reference Assemblies\Microsoft\Framework" is not owned but specifies
SDDL in component Microsoft-Windows-WWFCoreComp, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral
2014-07-28 11:04:28, Info CSI 0000088c [DIRSD OWNER WARNING] Directory [ml:520{260},l:118{59}]"\??\C:\Windows\Inf\Windows Workflow Foundation 3.0.0.0\0000" is not owned but specifies
SDDL in component Microsoft-Windows-WWFCoreComp, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral
2014-07-28 11:04:28, Info CSI 0000088d [DIRSD OWNER WARNING] Directory [ml:520{260},l:114{57}]"\??\C:\Program Files (x86)\Reference Assemblies\Microsoft" is not owned but specifies SDDL
in component Microsoft-Windows-WWFCoreComp, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral
2014-07-28 11:04:28, Info CSI 0000088e [DIRSD OWNER WARNING] Directory [ml:520{260},l:144{72}]"\??\C:\Program Files (x86)\Reference Assemblies\Microsoft\Framework\v3.0" is not owned
but specifies SDDL in component Microsoft-Windows-WWFCoreComp, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral
2014-07-28 11:04:28, Info CSI 0000088f [DIRSD OWNER WARNING] Directory [ml:520{260},l:94{47}]"\??\C:\Program Files (x86)\Reference Assemblies" is not owned but specifies SDDL in component
Microsoft-Windows-WWFCoreComp, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral
2014-07-28 11:04:30, Info CSI 00000890 Ignoring duplicate ownership for directory [l:72{36}]"\??\C:\Windows\microsoft.net\authman" in component Microsoft.Interop.Security.AzRoles, Version
= 6.3.9600.16384, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral
2014-07-28 11:04:31, Info CSI 00000891 [SR] Verify complete
2014-07-28 11:04:31, Info CSI 00000892 [SR] Verifying 100 (0x0000000000000064) components
2014-07-28 11:04:31, Info CSI 00000893 [SR] Beginning Verify and Repair transaction
2014-07-28 11:04:36, Info CSI 00000894 [SR] Verify complete
2014-07-28 11:04:36, Info CSI 00000895 [SR] Verifying 100 (0x0000000000000064) components
2014-07-28 11:04:36, Info CSI 00000896 [SR] Beginning Verify and Repair transaction
2014-07-28 11:04:40, Info CSI 00000897 [DIRSD OWNER WARNING] Directory [ml:520{260},l:120{60}]"\??\C:\Windows\Microsoft.NET\Framework\v2.0.50727\RedistList" is not owned but specifies
SDDL in component NetFx-ASSEMBLYLIST_XML, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope neutral, PublicKeyToken = {l:8 b:b03f5f7f11d50a3a}, Type neutral, TypeName neutral, PublicKey neutral
2014-07-28 11:04:42, Info CSI 00000898 [SR] Verify complete
2014-07-28 11:04:42, Info CSI 00000899 [SR] Verifying 100 (0x0000000000000064) components
2014-07-28 11:04:42, Info CSI 0000089a [SR] Beginning Verify and Repair transaction
2014-07-28 11:04:46, Info CSI 0000089b [SR] Verify complete
2014-07-28 11:04:46, Info CSI 0000089c [SR] Verifying 100 (0x0000000000000064) components
2014-07-28 11:04:46, Info CSI 0000089d [SR] Beginning Verify and Repair transaction
2014-07-28 11:04:52, Info CSI 0000089e [SR] Verify complete
2014-07-28 11:04:52, Info CSI 0000089f [SR] Verifying 100 (0x0000000000000064) components
2014-07-28 11:04:52, Info CSI 000008a0 [SR] Beginning Verify and Repair transaction
2014-07-28 11:04:58, Info CSI 000008a1 [SR] Verify complete
2014-07-28 11:04:58, Info CSI 000008a2 [SR] Verifying 100 (0x0000000000000064) components
2014-07-28 11:04:58, Info CSI 000008a3 [SR] Beginning Verify and Repair transaction
2014-07-28 11:05:02, Info CSI 000008a4 [SR] Verify complete
2014-07-28 11:05:02, Info CSI 000008a5 [SR] Verifying 100 (0x0000000000000064) components
2014-07-28 11:05:02, Info CSI 000008a6 [SR] Beginning Verify and Repair transaction
2014-07-28 11:05:08, Info CSI 000008a7 [SR] Verify complete
2014-07-28 11:05:08, Info CSI 000008a8 [SR] Verifying 52 (0x0000000000000034) components
2014-07-28 11:05:08, Info CSI 000008a9 [SR] Beginning Verify and Repair transaction
2014-07-28 11:05:09, Info CSI 000008aa [DIRSD OWNER WARNING] Directory [ml:520{260},l:56{28}]"\??\C:\Windows\system\Speech" is not owned but specifies SDDL in component Windows-Media-SpeechSynthesis-WinRT,
pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral
2014-07-28 11:05:09, Info CSI 000008ab Ignoring duplicate ownership for directory [l:56{28}]"\??\C:\Windows\system\Speech" in component Windows-Media-SpeechSynthesis-WinRT, Version =
6.3.9600.16384, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral
2014-07-28 11:05:09, Info CSI 000008ac [SR] Verify complete
2014-07-28 11:05:09, Info CSI 000008ad [SR] Repairing 1 components
2014-07-28 11:05:09, Info CSI 000008ae [SR] Beginning Verify and Repair transaction
2014-07-28 11:05:09, Info CSI 000008af Hashes for file member \??\C:\Program Files\Windows Server\Bin\WebApps\RemoteAccess\Web.config do not match actual file [l:20{10}]"Web.config"
Found: {l:32 b:jiP+IRWGZxsG0nX6il5MCZofFThiSfytb8Ih27r5EPk=} Expected: {l:32 b:KR7DbPqdCKMwdiZI2XDSr42o4ujtpZlzfX9ud+ODKRM=}
2014-07-28 11:05:09, Info CSI 000008b0 [SR] Repairing corrupted file [ml:520{260},l:120{60}]"\??\C:\Program Files\Windows Server\Bin\WebApps\RemoteAccess"\[l:20{10}]"Web.config" from
store
2014-07-28 11:05:09, Info CSI 000008b1 [SR] Repair complete
2014-07-28 11:05:09, Info CSI 000008b2 [SR] Committing transaction
2014-07-28 11:05:09, Info CSI 000008b3 Creating NT transaction (seq 2), objectname [6]"(null)"
2014-07-28 11:05:09, Info CSI 000008b4 Created NT transaction (seq 2) result 0x00000000, handle @0xba4
2014-07-28 11:05:11, Info CSI 000008b5@2014/7/28:09:05:11.308 Beginning NT transaction commit...
2014-07-28 11:05:11, Info CSI 000008b6@2014/7/28:09:05:11.470 CSI perf trace:
CSIPERF:TXCOMMIT;163479
2014-07-28 11:05:11, Info CSI 000008b7 [SR] Verify and Repair Transaction completed. All files and registry keys listed in this transaction have been successfully repaired
2014-07-28 11:07:13, Info CBS Trusted Installer is shutting down because: SHUTDOWN_REASON_AUTOSTOP
2014-07-28 11:07:13, Info CBS TiWorker signaled for shutdown, going to exit.
2014-07-28 11:07:13, Info CBS Ending the TiWorker main loop.
2014-07-28 11:07:13, Info CBS Starting TiWorker finalization.
2014-07-28 11:07:13, Info CBS Ending the TrustedInstaller main loop.
2014-07-28 11:07:13, Info CBS Starting TrustedInstaller finalization.
2014-07-28 11:07:13, Info CBS Ending TrustedInstaller finalization.
2014-07-28 11:07:13, Info CBS Ending TiWorker finalization.
Regards. Christer

Okay, for a novice (iphone for dummies) what steps to take and in what order to identify specific problem and resolve issue of dropped calls and/or bad connections. I have a 3g iphone4, I think. Where is best place to find that information so I can veri

Okay, for a novice (iphone for dummies) what steps to take and in what order to identify specific problem and resolve issue of dropped calls and/or bad connections. I have a 3g iphone4, I think. Where is best place to find that information so I can verify.

You can call your wireless provider and talk to them about it.
You can restart your iphone, reset, your iphone and restore your iphone.

I have been having problem for cad access since I upgrade from OSX 10.6 to OSX 10.8 Now it is akin me to select a certificate, but there is none listed

I have been having problem for cac access since I upgrade from OSX 10.6 to OSX 10.8. Now it is aking me to select a certificate, but there is none listed.

Is the SW you are using campaitible with 10.8.x?

[svn] 863: Cleanup the jsp for some space issue that causes problem for proxy test on WAS .

Revision: 863
Author: [email protected]
Date: 2008-03-19 11:39:05 -0700 (Wed, 19 Mar 2008)
Log Message:
Cleanup the jsp for some space issue that causes problem for proxy test on WAS. Update both trunk and 3.0.x branch.
Modified Paths:
blazeds/branches/3.0.x/qa/apps/qa-regress/remote/HttpXmlEchoService.jsp
blazeds/trunk/qa/apps/qa-regress/remote/HttpXmlEchoService.jsp

Revision: 863
Author: [email protected]
Date: 2008-03-19 11:39:05 -0700 (Wed, 19 Mar 2008)
Log Message:
Cleanup the jsp for some space issue that causes problem for proxy test on WAS. Update both trunk and 3.0.x branch.
Modified Paths:
blazeds/branches/3.0.x/qa/apps/qa-regress/remote/HttpXmlEchoService.jsp
blazeds/trunk/qa/apps/qa-regress/remote/HttpXmlEchoService.jsp

The maximum SOUND level is low on iPad mini retina, compared to an iPhone 4s. Research shows this is a common problem for this model around the world. Has anyone succeeded in solving this issue? Many Thanks, Peter.

The maximum SOUND level is low on iPad mini retina, compared to an iPhone 4s. Research shows this is a common problem for this model around the world. Has anyone succeeded in solving this issue? Many Thanks, Peter.

The maximum SOUND level is low on iPad mini retina, compared to an iPhone 4s. Research shows this is a common problem for this model around the world. Has anyone succeeded in solving this issue? Many Thanks, Peter.

ACS PROBLEM FOR CERTIFICATE ISSUE

Similar Messages

Maybe you are looking for