ACS SE 1113 Upgrade from 4.0.1 to current version

Hello,
does anyone has experience in upgrading the 1113 SE from 4.0.1 to the current version (4.2)? Our customer does not have a recovery CD. I did not found such an image on CCO. In case of any problems how can the system be recovered? Exact version of current version is 4.0.1(42). I suppose the following product will be the correct one for the upgrade: CSACSE4.2-SW-MR-K9.
Any hints are apprecdated, thanks.
Regards, Markus

The first step in migrate the ACS software running on a previous SE appliance platform (the Cisco 1111, the Cisco 1112 or the Cisco 1113) to run on the ACS 4.2 Cisco 1113 platform is to Upgrade the software on a previous SE hardware platform (the Cisco 1111 or the Cisco 1112) to ACSversion 4.1 by using the full upgrade method.
The further steps is described in the below URL:
http://www.ciscosystems.com/en/US/docs/net_mgmt/cisco_secure_access_control_server_for_solution_engine/4.2/installation/guide/solution_engine/upgap.pdf

Similar Messages

I have just upgraded from Elements/Premiere elements 11 to version 12. I am running on a PC with Windows 7. When I try to run video from the existing catalogue or video newly imported I get a window stating "....system does not have the required compresso

I have just upgraded from Elements/Premiere elements 11 to version 12. I am running on a PC with Windows 7. When I try to run video from the existing catalogue or video newly imported I get a window stating "....system does not have the required compressor/decompressor (codec) installed" Where has it gone? Where do I get a new one? I am getting REALLY REALLY fed up with trying to find an answer!!!!!!!!

Try to disable hardware acceleration in Firefox.
*Firefox > Preferences > Advanced > General > Browsing: "Use hardware acceleration when available"
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

Jannuary 2014 -I need Upgrade from ios 4.3.5 to version 0.6.x -NO ios 7!-

my iphone is MC605lP (iphone 4)
the system is now in use ios 4.3.5 (8L1)
I never upgraded to ios 7
I need to upgrade from ios 4.3.5 to version 6.x.x or better for my iphone 4
NO ios 7.x.x !!!!
Help can someone tell me how?
Regards
Stefano

But many people on the web say: os 7 does not work on the old phone! (it will be true?)
I'm afraid of losing the performace of the iPhone (and the data).
so ... I can not get the right version because I forgot to download it?
Are you sure?

I just bought iphone 5 and my itunes says I need itunes 10.7 But when I look for upgrades it says I have the current version of itunes. HELP!

I just bought iphone 5 and my itunes says I need itunes 10.7 But when I look for upgrades it says I have the current version of itunes. HELP!

I am so sorry I am frustrating you. This is the first time I have used this community and am leanring as I go. I am not able to see the entire post that you leave, unless I look at it on my phone (email)--I am so sorry. You have no idea how much i appreciate your help. Yes, I see that I can get the later version of OS software, but its not availabe for immediate download. My only options appear to be having it shipped, or going to the store to purchase. And if you know of another way that I can access all of my itunes library music on my new phone withouth using itunes, I would love to hear about it.--thanks and again i am so sorry for frustrating you.

I have an imac that is 3 years old, how do i upgrade my safari .. it is currently version 5.1.9

i have an imac that is 3 years old, how do i upgrade my safari .. it is currently version 5.1.9

1. You need to upgrade the computer's OS.
2. Snow Leopard is 10.6 through 10.6.8. Lion is 10.7 through 10.7.5. Mountain Lion is 10.8 through 10.8.3 and future unreleased 10.8 updates.
(81853)

How do I upgrade from Acrobat 8 to the latest version of Acrobat

I was looking in the shop and it only gives the option to upgrade from 9 on. We have 13 Acrobat 8 licenses that we would like to upgrade if possible. Any suggestions?

Hi cathyt873
Upgrade to Acrobat XI from Acrobat 8 is not possible. You need to purchase the full version.
Please refer : Buying guide | Adobe Acrobat XI Pro

Related to Upgrade from 9.3.1 to 11 version

Hi Experts,
I need to upgrade from 9.3.1 to 11.1.1.3/11.1.2.1.
I know recommeded to install on new servers;
1) What if client ask to upgrade (no new server) on existing one.
2) How to handle if we have already Tomca Appache (app server) on 9.3.1 and now 11 doesn't support.
what points to keep in mind with these two challenges to reduce some complexity.
Regards
Kumar

I think your question is not one that can always be answered quickly on a forum but it is worth you having a read of the following on Oracle support - "Upgrade Advisor: Enterprise Performance Management (EPM) System Upgrade from 11.1.1.3 to 11.1.2.1 [ID 324.1]"
Yes it is 11.11.3 to 11.1.2.1 but it goes through all the different stages from evaluation to acceptance, the information provided is relevant to other versions.
It is possible to upgrade from on the same server, tomcat is no longer supported so the web app server used will be weblogic.
There is also details in the documentation about upgrading - http://download.oracle.com/docs/cd/E17236_01/epm.1112/epm_install_11121/frameset.htm?ch05.html
Cheers
John
http://john-goodwin.blogspot.com/

HT1338 Need Download Page to update dated iCal after upgrade to 10.6.8 from 10.5.8. Current version of iCal is on with 10.6.8 and would like to determine on my own if it is the latest version. Searching for iCal Downloads is beyond any useful outcome.

Trying to find URL for iCal version downloads.
Need to verify correct version of iCal for recent upgrade to OS 10.6.8.
Current version of iCal is 4.0.4.
Would prefer web address for downloads and not just a: "You've got the right version" "You need to download to" type of response to thread entry.
Reason: iCal is spazing and duplicating current entrys on iPhone 4S iOS 6.3, and Quadrupeling and more current entrys as well as notifying me of calendar events that occurred seven years ago (random years) on my laptop running OS 10.6.8.
Thinking that an update to iCal might be cure to refresh iCloud web address syncing and correct crazy notifications and doubling and tripling.. of iCal entrys.
Thanks for the help, much appreciated.

4.0.4 is the version of iCal for 10.6.8. You could try downloading and applying the combo updater for 10.6.8 -
http://support.apple.com/kb/DL1399
However Snow Leopard is not compatible with iCloud, so if you are somehow managing to make iCal sync with it it's a fudge and likely not to be reliable. Also, if you are syncing with iCloud you must avoid also trying to sync using iTunes - mixing two syncing methods is a quick way to problems.
If your Mac is capable of upgrading to Lion or Mountain LIon that would give you proper access to iCloud and a higher version of iCal.
The requirements for Lion are:
Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7, or Xeon processor
2GB of memory
OS X v10.6.6 or later (v10.6.8 recommended)
7GB of available space
To purchase it you will have to ring Apple at the number given at the bottom left of this page.
The requirements for Mountain Lion are listed here:
http://www.apple.com/osx/specs/
It is available from the Mac App Store (in Applications). (If you are currently pre-Snow Leopard you will have to upgrade to that to access the Mac App Store: it's available in the online Apple Store.)
You should be aware that PPC programs (such as AppleWorks) will not run on Lion or above; and some other applications may not be compatible - there is a useful compatibility checklist at http://roaringapps.com/apps:table

Upgrade from Photoshop CS6 Student to normal version?

Hello there,
Last year I bought Photoshop CS6 Student as I was a student back then. Right now I started a business and want to keep using photoshop legally. Is it possible to upgrade from a student license to a normal license? What is the price of this upgrade? Or can I just use my student version for business purposes? (I guess not)
Thanks in advance
Regards

Primarily a budgetary concern. At the time, I had $199 to spend on the upgrade. The extra $200 wasn't going to happen before the end of December when the pricing was said to increase so I went ahead and picked up CS6. The 3D capabilities would be nice to have and probably would be helpful in future projects, but the need right now was to get the upgrade to the standard with the (now presumably false) assumption I could upgrade when I had a few more gigs show up.
If it's another $400 to upgrade, it won't be worth it for me. My primary job is programming, I only do side work for photography and some simple design and while it'd be nice to have some basic 3D ability in Photoshop, it's not $600 worth (400 for the upgrade + the $200 I already spent).

IDSM 2 Upgrade from 6.2(2)E4 to version 7.x(x) E4

Hell Frz ..
I am planning to upgrade IDSM 2 from current version 6.2(2)E4 to latest version 7.x .
Could you please guide me how to upgrade it to latest version and also let me know what precausionary measurs I have to do before upgrade .
Thanks in advance .
Regards ..
Manik Palekar

You can either upgrade it via the GUI (IDM) or via command line (CLI).
Via GUI: Configuration -->Sensor Management --> Update Sensor:
http://www.cisco.com/en/US/docs/security/ips/7.0/configuration/guide/idm/idm_sensor_management.html#wp2219913
Via CLI:
http://www.cisco.com/en/US/docs/security/ips/7.0/installation/guide/hw_system_images.html#wp1088688
Hope that helps.

Upgrade from PageMaker to InDesign. What version is best and will old serial number work?

I'd like to upgrade from PageMaker 6.5 to InDesign. Should I wait for InDesign C S5. Will InDesign C S5 support PageMaker? Or should I upgrade to InDesign C S4? And if I have an old serial number for PageMaker 6.5, how can I complete the upgrade? I understand the older PageMaker serial numbers are no longer recognized.

I understand that Adobe is already selling InDesign CS5 and therefore you would have no choice if you want to upgrade. I would think that the easiest way of finding if your PM serial number applies for an upgrade is to try buying an upgrade. You don't need to complete the purchase if you don't want to.

Going to upgrade v. 3.6 to current version 15., do i need to delete 3.6 first or just upgrade over current 3.6??

using HP laptop, Windows 7 home premium,
Any good advice before i begin?
George

It may be best to uninstall the current version to make sure that the registry gets updated properly.<br />
Otherwise it is possible that you still see the old entry in remove programs.
Download a fresh Firefox copy and save the file to the desktop.
*Firefox 15.0.x: http://www.mozilla.org/en-US/firefox/all.html
Uninstall your current Firefox version, if possible, to cleanup the Windows registry and settings in security software.
*Do NOT remove personal data when you uninstall your current Firefox version, because all profile folders will be removed and you will also lose your personal data like bookmarks and passwords from profiles of other Firefox versions.
Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
*It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
*http://kb.mozillazine.org/Uninstalling_Firefox
Your bookmarks and other profile data are stored in the Firefox Profile Folder and won't be affected by an uninstall and (re)install, but make sure that "remove personal data" is NOT selected when you uninstall Firefox.
*http://kb.mozillazine.org/Profile_folder_-_Firefox
*http://kb.mozillazine.org/Profile_backup
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

I currently have 10.5.8 on my Intel desk top. What do I need to do to upgrade from this OS to the Newest version OS?

I currently have 10.5.8 OS on my 3.06 GHz Intel Core 2 Duo with 2 GB 800 MHz DDR2 SDRAM.
My machine needs to be Up-Graded to the Newest OS.
But I get different opinions from everyone as to how to do this Up-Grade.
Can I just buy the Newest OS and install it.?
OR must I go thru all the previous OS up-grades first.?
OR do I just take this "old" machine to the Apple Store and Buy a New one and let them

Your machine appears to be a Early 2008 24" iMac (iMac 8,1) and even though you meet the minimal 2GB of RAM, you really should max it out at 6GB for the beast of Lions.
You have two slots, one can hold a 4GB module and the other 2GB.
Maximum Memory
6.0 GB (Actual) 4.0 GB (Apple)
Memory Slots
2 - 200-pin PC2-6400 (800MHz) DDR2 SO-DIMM
Use System Profiler to confirm your machine Model Identification and use Crucial.com checker to make sure your getting the right RAM spec.
Warning!, your current PPC based software will NOT run in 10.7 or 10.8+
http://roaringapps.com/apps:table
This could be a very expensive upgrade, Snow Leopard, then Mountain Lion, more RAM and all new software all for a dated machine.
I'd say upgrade it to 10.6.8 max and perhaps add more RAM and stay there for best performance.
OS X 10.4/10.5 need to upgrade, 10.6.8 ok still
Yes, do consider a new one with 10.8, better to spend all the money on software there than on a dated machine.
Good luck.

Cisco 1141N AP upgrading from 12.4 to the latest version 12.x

Hi,
I purchased the 1141n AP. Last year when in May, I called Cisco support for help. He told me it, the 1141n would not works alone, it needs the controller. However, He also stated that the new version of IOS will be working as the access point alone.
So I have it, donwload the latest software c1140-k9w7-tar.124-21a.JY.tar from Cisco.com.
Is this the correct version for 1141N and can it work as stand alone now, or acting as the extended WDS extended from the other AP like Apple Extreme.?
please advice.
Thanks

Did you buy a 1141LAP or 1141AP? If you bought an LAP, you are going to have to transfer that IOS image you downloaded to your 1141 using xmodem, TFTP, or borrow your buddy's controller, associate your lwap to it, and revert it to IOS. I don't recall how to do it using xmodem (it's a pain and takes forever anyway), but here's the documentation of how to do it using a TFTP server:
http://www.cisco.com/en/US/docs/wireless/access_point/conversion/lwapp/upgrade/guide/lwapnote.html#wp161272
If you bought a 1141AP, you're in luck! Just plug that bad boy into your router, grab the ip, navigate to the http server of it using that ip, and configure away using the web gui! From there, you can even upgrade to the latest version of IOS very easily!
Good luck!

Upgrade from 10.4.11 to recent version?

I am trying to upgrade my Mac OS version, currently 10.4.11.
My software upgrade tells me I am completely up-to-date with my software.
I am using a Mac Pro 2 x 3 GHz Dual-Core Intel Xeon machine.
With 2 GB 667 MHz DDR2 FB-DIMM.
What do I have to do to enjoy the latest Mac OS Version so I can start using iCloud and other upgrades of different programs?

Buy the $29 Snow Leopard disc from Apple and install it. Then do the online upgrade to Lion. You'll have to pay for both upgrades. Apple may also encourage you to buy the other software and get the full box set for Snow Leopard but it's up to you if you think you need/want it.
Snow Leopard 10.6 Technical Requirements - http://support.apple.com/kb/SP575
A Mac OS X 10.6 Snow Leopard Application Compatibility List - http://snowleopard.wikidot.com/
OS X Lion Technical Specifications - http://www.apple.com/macosx/specs.html
Installing Lion: Our complete guide - http://www.macworld.com/article/161064/2011/07/installing_lion_complete_guide.ht ml
How to install Lion over Leopard - http://www.macworld.com/article/161087/2011/07/install_lion_over_leopard.html
OS X Lion: Installation Guide, Boot Discs and Q&A - http://www.macstories.net/mac/os-x-lion-installation-guide-boot-discs-and-qa/
Note, no PPC generation applications (something somebody still running Tiger may have around) are supported by Lion. Check your versions and consider additional upgrade costs you may incur with using Lion.

ACS SE 1113 Upgrade from 4.0.1 to current version

Similar Messages

Maybe you are looking for