ACS SE 4.0 - https login failed

Hi,
I have switched the ACS from http to https mode after generating a Self-Signed Certificate.
After rebooting the ACS, there is no way to connect via a webbrowser. Only the console login works.
Is there a possibility to uninstall the certificates from the console and switch back to http mode?
Best Regards
Andr?

Below is what you can try:
1) Restore the ACS applinace using an old backup file .
http://www.cisco.com/univercd/cc/td/doc/product/access/acs_soft/csacsapp/csapp33/install/cliap.htm
2) If you have a secondary server as well then you can re-image this ACS and replicate it with the secondary later on to the the config back. ( Note : Replication only works b/w ACS of same software version and built)
http://cisco.com/en/US/products/sw/secursw/ps2086/products_configuration_example09186a00800e518a.shtml
Thx ,
Jasjeet

Similar Messages

ACS 5.1.0.44 GUI login failed!!

Dear guys,
I'm trying to setup Cisco ACS (5.1.0.44) in VMware work station for a testing/study purpose. Installation went fine. I can login through SSH, but GUI login failed with the same credential. Please find the attached images.
Any help will be highly appreciated!!
login as: admin
Using keyboard-interactive authentication.
Password:
Last login: Tue Oct 30 17:31:24 2012
ACS-LAB/admin# show running-config
Generating configuration...
hostname ACS-LAB
ip domain-name testlab
interface GigabitEthernet 0
ip address 10.10.10.50 255.255.255.0
ip name-server 8.8.8.8
ip default-gateway 10.10.10.254
clock timezone UTC
username admin password hash $1$HRi10i.R$LHqyKJWVqDxfrcmaWGPOM1 role admin
service sshd
password-policy
lower-case-required
upper-case-required
digit-required
no-username
disable-cisco-passwords
min-password-length 6
logging localhost
logging loglevel 6
cdp timer 60
cdp holdtime 180
cdp run GigabitEthernet 0
icmp echo on
ACS-LAB/admin#
Thanks.

Hi there,
The first time you access the ACS GUI you need to use the default credentials:
Username: acsadmin
Password: default
After this the server will ask you to change the password. Please give it a try and let me know how it goes.

Webvpn login failed

Hi Everyone!
I am configuring an asa 5520 (Software Version 8.2(5)) serveral clientless connection profiles and ACS 5.3 as an authentication server, this works well users on AD or local can establish a vpn connection without problem, but now i need to show just one profile (common for everybody) on the ASA portal and behind scene allocate to right connection profile depending on the authorization profile of the user, i followed the following document
"VPN group lock using ACS 5.x.pdf", but it does not work as expected, it keeps showing "login failed"
So i took a look on the ACS on radius authentication and the user is authenticated, i did a debug aaa common 255, debug radius all
everything seem to be ok, but when i use debug webvpn 255
it shows me the following message
asa# webvpn_allocate_auth_struct: net_handle = D0200040
webvpn_portal.c:ewaFormSubmit_webvpn_login[3203]
webvpn_portal.c:webvpn_login_validate_net_handle[2234]
webvpn_portal.c:webvpn_login_allocate_auth_struct[2254]
webvpn_portal.c:webvpn_login_assign_app_next[2272]
webvpn_portal.c:webvpn_login_cookie_check[2289]
webvpn_portal.c:webvpn_login_set_tg_buffer_from_form[2325]
webvpn_portal.c:webvpn_login_transcend_cert_auth_cookie[2359]
webvpn_login_transcend_cert_auth_cookie: tg_cookie = NULL, tg_name = SSLClientProfile
webvpn_portal.c:webvpn_login_set_tg_cookie_form[2421]
webvpn_portal.c:webvpn_login_set_tg_cookie_querry_string[2473]
webvpn_portal.c:webvpn_login_resolve_tunnel_group[2546]
webvpn_login_resolve_tunnel_group: tgCookie = NULL
webvpn_login_resolve_tunnel_group: tunnel group name from group list
webvpn_login_resolve_tunnel_group: TG_BUFFER = SSLClientProfile
webvpn_portal.c:webvpn_login_negotiate_client_cert[2636]
webvpn_portal.c:webvpn_login_check_cert_status[2733]
webvpn_portal.c:webvpn_login_cert_only[2774]
webvpn_portal.c:webvpn_login_primary_username[2796]
webvpn_portal.c:webvpn_login_primary_password[2878]
webvpn_portal.c:webvpn_login_secondary_username[2910]
webvpn_portal.c:webvpn_login_secondary_password[2988]
webvpn_portal.c:webvpn_login_extra_password[3021]
webvpn_portal.c:webvpn_login_set_cookie_flag[3040]
webvpn_portal.c:webvpn_login_set_auth_group_type[3063]
webvpn_login_set_auth_group_type: WEBVPN_AUTH_GROUP_TYPE = 1
webvpn_portal.c:webvpn_login_aaa_not_resuming[3137]
webvpn_portal.c:http_webvpn_kill_cookie[790]
webvpn_auth.c:http_webvpn_pre_authentication[2447]
WebVPN: calling AAA with ewsContext (-780823792) and nh (-803209152)!
webvpn_add_auth_handle: auth_handle = 529
WebVPN: started user authentication...
webvpn_auth.c:webvpn_aaa_callback[5320]
WebVPN: AAA status = (ACCEPT)
webvpn_portal.c:ewaFormSubmit_webvpn_login[3203]
webvpn_portal.c:webvpn_login_validate_net_handle[2234]
webvpn_portal.c:webvpn_login_allocate_auth_struct[2254]
webvpn_portal.c:webvpn_login_assign_app_next[2272]
webvpn_portal.c:webvpn_login_cookie_check[2289]
webvpn_portal.c:webvpn_login_set_tg_buffer_from_form[2325]
webvpn_portal.c:webvpn_login_transcend_cert_auth_cookie[2359]
webvpn_login_transcend_cert_auth_cookie: tg_cookie = NULL, tg_name = SSLClientProfile
webvpn_portal.c:webvpn_login_set_tg_cookie_form[2421]
webvpn_portal.c:webvpn_login_set_tg_cookie_querry_string[2473]
webvpn_portal.c:webvpn_login_resolve_tunnel_group[2546]
webvpn_portal.c:webvpn_login_negotiate_client_cert[2636]
webvpn_portal.c:webvpn_login_check_cert_status[2733]
webvpn_portal.c:webvpn_login_cert_only[2774]
webvpn_portal.c:webvpn_login_primary_username[2796]
webvpn_portal.c:webvpn_login_primary_password[2878]
webvpn_portal.c:webvpn_login_secondary_username[2910]
webvpn_portal.c:webvpn_login_secondary_password[2988]
webvpn_portal.c:webvpn_login_extra_password[3021]
webvpn_portal.c:webvpn_login_set_cookie_flag[3040]
webvpn_portal.c:webvpn_login_set_auth_group_type[3063]
webvpn_login_set_auth_group_type: WEBVPN_AUTH_GROUP_TYPE = 1
webvpn_portal.c:webvpn_login_aaa_resuming[3093]
webvpn_auth.c:http_webvpn_post_authentication[1611]
WebVPN: user: (john) authenticated.
webvpn_auth.c:http_webvpn_auth_accept[3066]
User came in on group he wasn't supposed to come in on!
webvpn_remove_auth_handle: auth_handle = 529
webvpn_free_auth_struct: net_handle = D0200040
Any suggestion would be appreciated
Thanks
Jonathan

Jonathan,
The issue is clear, your users are not connecting to the right profile.
Please check this out:
ASA 8.x: Allow Users to Select a Group at WebVPN Login via Group-Alias and Group-URL Method
The idea of having ACS authorization is to assign a specific group-policy according to probably Radius attribute 25, but if you have it working in conjuction with the "group-lock" feature, then you need to make sure that the users connect to the correct connection profile, otherwise the group-policy will not allow the connection.
For instance:
group-policy test attributes
     group-lock testGroup
tunnel-group testGroup general-attributes
     default-group-policy test
tunnel-group testGroup webvpn attributes
     group-url https://1.1.1.1/testGroup enable
So if a user connects to a different profile which is not the testGroup and gets the group-policy named test, then the connection is going to be rejected.
HTH.
Portu.

CSACS GUI login failed

DearPros,
After i installaed the CSACS 3.3 on windows 2003 server,when i access it via web browser i am getting the following message
http://192.168.100.3:2002
USERNAME :admin
PASSWORD : admin
Login failed...try again
I just login after the fresh installation.what is the defaukt username and password to use.
Thanks
swamy

Hi Swamy,
There is no default username and password associated with ACS software, as you are trying to access the server remotely you would first have to create an admin account on ACS server.
Logon to the server itself locally as ACS install Java runtime on it from www.java.com as 2003 does not have java pre-installed on it.Next open IE and goto http://127.0.0.1:2002
On the ACS GUI interface click on Administration Control-->Add administrator and create a admin account there make sure you click the Grant All button.
You can now login to ACS using this admin account.
I hope this helps.
Thanks
Gagan

SSL VPN, "Login failed" and "WebVPN: error creating WebVPN session!"

Hi,
Just ran the wizard for Anyconnect SSL VPN, created a tunnel group, a vpn pool and added user to it. When trying to logon on the SSL service, it simply says "login failed". I suspect that the user might not be in correct groups or so?
some relevant config
webvpn
enable wan
svc image disk0:/anyconnect-win-2.4.1012-k9.pkg 1
svc enable
group-policy vpnpolicy1 internal
group-policy vpnpolicy1 attributes
vpn-tunnel-protocol svc
tunnel-group admins type remote-access
tunnel-group admins general-attributes
address-pool sslpool2
default-group-policy vpnpolicy1
username myuser password 1234567890 encrypted privilege 15
username myuser attributes
vpn-group-policy vpnpolicy1
Debug:
asa01# debug webvpn 255
INFO: debug webvpn enabled at level 255.
asa01# webvpn_allocate_auth_struct: net_handle = CD5734D0
webvpn_portal.c:ewaFormSubmit_webvpn_login[3203]
webvpn_portal.c:webvpn_login_validate_net_handle[2234]
webvpn_portal.c:webvpn_login_allocate_auth_struct[2254]
webvpn_portal.c:webvpn_login_assign_app_next[2272]
webvpn_portal.c:webvpn_login_cookie_check[2289]
webvpn_portal.c:webvpn_login_set_tg_buffer_from_form[2325]
webvpn_portal.c:webvpn_login_transcend_cert_auth_cookie[2359]
webvpn_login_transcend_cert_auth_cookie: tg_cookie = NULL, tg_name =
webvpn_portal.c:webvpn_login_set_tg_cookie_form[2421]
webvpn_portal.c:webvpn_login_set_tg_cookie_querry_string[2473]
webvpn_portal.c:webvpn_login_resolve_tunnel_group[2546]
webvpn_login_resolve_tunnel_group: tgCookie = NULL
webvpn_login_resolve_tunnel_group: tunnel group name from default
webvpn_login_resolve_tunnel_group: TG_BUFFER = DefaultWEBVPNGroup
webvpn_portal.c:webvpn_login_negotiate_client_cert[2636]
webvpn_portal.c:webvpn_login_check_cert_status[2733]
webvpn_portal.c:webvpn_login_cert_only[2774]
webvpn_portal.c:webvpn_login_primary_username[2796]
webvpn_portal.c:webvpn_login_primary_password[2878]
webvpn_portal.c:webvpn_login_secondary_username[2910]
webvpn_portal.c:webvpn_login_secondary_password[2988]
webvpn_portal.c:webvpn_login_extra_password[3021]
webvpn_portal.c:webvpn_login_set_cookie_flag[3040]
webvpn_portal.c:webvpn_login_set_auth_group_type[3063]
webvpn_login_set_auth_group_type: WEBVPN_AUTH_GROUP_TYPE = 4
webvpn_portal.c:webvpn_login_aaa_not_resuming[3137]
webvpn_portal.c:http_webvpn_kill_cookie[790]
webvpn_auth.c:http_webvpn_pre_authentication[2321]
WebVPN: calling AAA with ewsContext (-867034168) and nh (-849922864)!
webvpn_add_auth_handle: auth_handle = 17
WebVPN: started user authentication...
webvpn_auth.c:webvpn_aaa_callback[5138]
WebVPN: AAA status = (ACCEPT)
webvpn_portal.c:ewaFormSubmit_webvpn_login[3203]
webvpn_portal.c:webvpn_login_validate_net_handle[2234]
webvpn_portal.c:webvpn_login_allocate_auth_struct[2254]
webvpn_portal.c:webvpn_login_assign_app_next[2272]
webvpn_portal.c:webvpn_login_cookie_check[2289]
webvpn_portal.c:webvpn_login_set_tg_buffer_from_form[2325]
webvpn_portal.c:webvpn_login_transcend_cert_auth_cookie[2359]
webvpn_login_transcend_cert_auth_cookie: tg_cookie = NULL, tg_name =
webvpn_portal.c:webvpn_login_set_tg_cookie_form[2421]
webvpn_portal.c:webvpn_login_set_tg_cookie_querry_string[2473]
webvpn_portal.c:webvpn_login_resolve_tunnel_group[2546]
webvpn_portal.c:webvpn_login_negotiate_client_cert[2636]
webvpn_portal.c:webvpn_login_check_cert_status[2733]
webvpn_portal.c:webvpn_login_cert_only[2774]
webvpn_portal.c:webvpn_login_primary_username[2796]
webvpn_portal.c:webvpn_login_primary_password[2878]
webvpn_portal.c:webvpn_login_secondary_username[2910]
webvpn_portal.c:webvpn_login_secondary_password[2988]
webvpn_portal.c:webvpn_login_extra_password[3021]
webvpn_portal.c:webvpn_login_set_cookie_flag[3040]
webvpn_portal.c:webvpn_login_set_auth_group_type[3063]
webvpn_login_set_auth_group_type: WEBVPN_AUTH_GROUP_TYPE = 4
webvpn_portal.c:webvpn_login_aaa_resuming[3093]
webvpn_auth.c:http_webvpn_post_authentication[1485]
WebVPN: user: (myuser) authenticated.
webvpn_auth.c:http_webvpn_auth_accept[2938]
webvpn_session.c:http_webvpn_create_session[184]
WebVPN: error creating WebVPN session!
webvpn_remove_auth_handle: auth_handle = 17
webvpn_free_auth_struct: net_handle = CD5734D0
webvpn_allocate_auth_struct: net_handle = CD5734D0
webvpn_free_auth_struct: net_handle = CD5734D0

AnyConnect says:
"The secure gateway has rejected the agents VPN connect or reconnect request. A new connection requires re-authentication and must be started manually. Please contact your network administrator if this problem persists.
The following message was received from the secure gateway: Host or network is 0"
Other resources indicate that it's either the tunnel group, or the address pool.. The address pool is:
ip local pool sslpool2 172.16.20.0-172.16.20.254 mask 255.255.255.0
asa01# debug webvpn 255
INFO: debug webvpn enabled at level 255.
asa01# debug http 255
debug http enabled at level 255.
asa01# webvpn_allocate_auth_struct: net_handle = CE9C3208
webvpn_portal.c:ewaFormSubmit_webvpn_login[3203]
webvpn_portal.c:webvpn_login_validate_net_handle[2234]
webvpn_portal.c:webvpn_login_allocate_auth_struct[2254]
webvpn_portal.c:webvpn_login_assign_app_next[2272]
webvpn_portal.c:webvpn_login_cookie_check[2289]
webvpn_portal.c:webvpn_login_set_tg_buffer_from_form[2325]
webvpn_portal.c:webvpn_login_transcend_cert_auth_cookie[2359]
webvpn_login_transcend_cert_auth_cookie: tg_cookie = NULL, tg_name =
webvpn_portal.c:webvpn_login_set_tg_cookie_form[2421]
webvpn_portal.c:webvpn_login_set_tg_cookie_querry_string[2473]
webvpn_portal.c:webvpn_login_resolve_tunnel_group[2546]
webvpn_login_resolve_tunnel_group: tgCookie = NULL
webvpn_login_resolve_tunnel_group: tunnel group name from default
webvpn_login_resolve_tunnel_group: TG_BUFFER = DefaultWEBVPNGroup
webvpn_portal.c:webvpn_login_negotiate_client_cert[2636]
webvpn_portal.c:webvpn_login_check_cert_status[2733]
webvpn_portal.c:webvpn_login_cert_only[2774]
webvpn_portal.c:webvpn_login_primary_username[2796]
webvpn_portal.c:webvpn_login_primary_password[2878]
webvpn_portal.c:webvpn_login_secondary_username[2910]
webvpn_portal.c:webvpn_login_secondary_password[2988]
webvpn_portal.c:webvpn_login_extra_password[3021]
webvpn_portal.c:webvpn_login_set_cookie_flag[3040]
webvpn_portal.c:webvpn_login_set_auth_group_type[3063]
webvpn_login_set_auth_group_type: WEBVPN_AUTH_GROUP_TYPE = 4
webvpn_portal.c:webvpn_login_aaa_not_resuming[3137]
webvpn_portal.c:http_webvpn_kill_cookie[790]
webvpn_auth.c:http_webvpn_pre_authentication[2321]
WebVPN: calling AAA with ewsContext (-845538720) and nh (-828624376)!
webvpn_add_auth_handle: auth_handle = 22
WebVPN: started user authentication...
webvpn_auth.c:webvpn_aaa_callback[5138]
WebVPN: AAA status = (ACCEPT)
webvpn_portal.c:ewaFormSubmit_webvpn_login[3203]
webvpn_portal.c:webvpn_login_validate_net_handle[2234]
webvpn_portal.c:webvpn_login_allocate_auth_struct[2254]
webvpn_portal.c:webvpn_login_assign_app_next[2272]
webvpn_portal.c:webvpn_login_cookie_check[2289]
webvpn_portal.c:webvpn_login_set_tg_buffer_from_form[2325]
webvpn_portal.c:webvpn_login_transcend_cert_auth_cookie[2359]
webvpn_login_transcend_cert_auth_cookie: tg_cookie = NULL, tg_name =
webvpn_portal.c:webvpn_login_set_tg_cookie_form[2421]
webvpn_portal.c:webvpn_login_set_tg_cookie_querry_string[2473]
webvpn_portal.c:webvpn_login_resolve_tunnel_group[2546]
webvpn_portal.c:webvpn_login_negotiate_client_cert[2636]
webvpn_portal.c:webvpn_login_check_cert_status[2733]
webvpn_portal.c:webvpn_login_cert_only[2774]
webvpn_portal.c:webvpn_login_primary_username[2796]
webvpn_portal.c:webvpn_login_primary_password[2878]
webvpn_portal.c:webvpn_login_secondary_username[2910]
webvpn_portal.c:webvpn_login_secondary_password[2988]
webvpn_portal.c:webvpn_login_extra_password[3021]
webvpn_portal.c:webvpn_login_set_cookie_flag[3040]
webvpn_portal.c:webvpn_login_set_auth_group_type[3063]
webvpn_login_set_auth_group_type: WEBVPN_AUTH_GROUP_TYPE = 4
webvpn_portal.c:webvpn_login_aaa_resuming[3093]
webvpn_auth.c:http_webvpn_post_authentication[1485]
WebVPN: user: (myuser) authenticated.
webvpn_auth.c:http_webvpn_auth_accept[2938]
HTTP: net_handle->standalone_client [0]
webvpn_session.c:http_webvpn_create_session[184]
webvpn_session.c:http_webvpn_find_session[159]
WebVPN session created!
webvpn_session.c:http_webvpn_find_session[159]
webvpn_remove_auth_handle: auth_handle = 22
webvpn_portal.c:ewaFormServe_webvpn_cookie[1805]
webvpn_free_auth_struct: net_handle = CE9C3208
webvpn_allocate_auth_struct: net_handle = CE9C3208
ewsStringSearch: no buffer
Close 0
webvpn_free_auth_struct: net_handle = CE9C3208
webvpn_allocate_auth_struct: net_handle = CE9C3208
webvpn_auth.c:webvpn_auth[581]
webvpn_session.c:http_webvpn_find_session[159]
webvpn_session.c:webvpn_update_idle_time[1463]
WebVPN: session has been authenticated.
webvpn_free_auth_struct: net_handle = CE9C3208
webvpn_allocate_auth_struct: net_handle = CE9C3208
ewsStringSearch: no buffer
Close 0
webvpn_free_auth_struct: net_handle = CE9C3208
webvpn_session.c:http_webvpn_find_session[159]
webvpn_session.c:http_webvpn_find_session[159]
webvpn_session.c:http_webvpn_find_session[159]
webvpn_session.c:webvpn_update_idle_time[1463]
webvpn_session.c:http_webvpn_find_session[159]
webvpn_session.c:http_webvpn_find_session[159]
webvpn_session.c:http_webvpn_find_session[159]
webvpn_session.c:http_webvpn_find_session[159]
webvpn_session.c:http_webvpn_find_session[159]
webvpn_session.c:http_webvpn_find_session[159]
webvpn_allocate_auth_struct: net_handle = CE9C3208
webvpn_auth.c:webvpn_auth[581]
webvpn_session.c:http_webvpn_find_session[159]
webvpn_session.c:webvpn_update_idle_time[1463]
WebVPN: session has been authenticated.
webvpn_free_auth_struct: net_handle = CE9C3208
webvpn_allocate_auth_struct: net_handle = CE9C3208
ewsStringSearch: no buffer
Close 0
webvpn_free_auth_struct: net_handle = CE9C3208
webvpn_allocate_auth_struct: net_handle = CE863DE8
webvpn_auth.c:webvpn_auth[581]
webvpn_session.c:http_webvpn_find_session[159]
webvpn_session.c:webvpn_update_idle_time[1463]
WebVPN: session has been authenticated.
webvpn_free_auth_struct: net_handle = CE863DE8
webvpn_allocate_auth_struct: net_handle = CE863DE8
ewsStringSearch: no buffer
Close 0
webvpn_free_auth_struct: net_handle = CE863DE8
webvpn_allocate_auth_struct: net_handle = CE9C32C8
webvpn_auth.c:webvpn_auth[581]
webvpn_session.c:http_webvpn_find_session[159]
webvpn_session.c:webvpn_update_idle_time[1463]
WebVPN: session has been authenticated.
webvpn_free_auth_struct: net_handle = CE9C32C8
webvpn_allocate_auth_struct: net_handle = CE9C32C8
ewsStringSearch: no buffer
Close 0
webvpn_free_auth_struct: net_handle = CE9C32C8
webvpn_allocate_auth_struct: net_handle = CE9C32C8
webvpn_allocate_auth_struct: net_handle = CE863DE8
webvpn_auth.c:webvpn_auth[581]
webvpn_session.c:http_webvpn_find_session[159]
webvpn_session.c:webvpn_update_idle_time[1463]
WebVPN: session has been authenticated.
webvpn_auth.c:webvpn_auth[581]
webvpn_session.c:http_webvpn_find_session[159]
webvpn_session.c:webvpn_update_idle_time[1463]
WebVPN: session has been authenticated.
webvpn_free_auth_struct: net_handle = CE863DE8
webvpn_allocate_auth_struct: net_handle = CE863DE8
ewsStringSearch: no buffer
Close 0
webvpn_free_auth_struct: net_handle = CE863DE8
webvpn_free_auth_struct: net_handle = CE9C32C8
webvpn_allocate_auth_struct: net_handle = CE9C32C8
ewsStringSearch: no buffer
Close 0
webvpn_free_auth_struct: net_handle = CE9C32C8
webvpn_allocate_auth_struct: net_handle = CE9C32C8
webvpn_auth.c:webvpn_auth[581]
webvpn_session.c:http_webvpn_find_session[159]
webvpn_session.c:webvpn_update_idle_time[1463]
WebVPN: session has been authenticated.
webvpn_free_auth_struct: net_handle = CE9C32C8
webvpn_allocate_auth_struct: net_handle = CE9C32C8
ewsStringSearch: no buffer
Close 0
webvpn_free_auth_struct: net_handle = CE9C32C8
HTTP: Periodic admin session check (idle-timeout = 1200, session-timeout = 0)
webvpn_allocate_auth_struct: net_handle = CE9C32C8
webvpn_auth.c:webvpn_auth[581]
webvpn_session.c:http_webvpn_find_session[159]
webvpn_session.c:webvpn_update_idle_time[1463]
WebVPN: session has been authenticated.
webvpn_free_auth_struct: net_handle = CE9C32C8
webvpn_allocate_auth_struct: net_handle = CE9C32C8
ewsStringSearch: no buffer
Close 0
webvpn_free_auth_struct: net_handle = CE9C32C8
webvpn_session.c:http_webvpn_find_session[159]
webvpn_session.c:http_webvpn_find_session[159]
webvpn_allocate_auth_struct: net_handle = CE9C32C8
webvpn_auth.c:webvpn_auth[581]
webvpn_session.c:http_webvpn_find_session[159]
webvpn_session.c:webvpn_update_idle_time[1463]
WebVPN: session has been authenticated.
webvpn_free_auth_struct: net_handle = CE9C32C8
webvpn_allocate_auth_struct: net_handle = CE9C32C8
ewsStringSearch: no buffer
Close 0
webvpn_free_auth_struct: net_handle = CE9C32C8
webvpn_session.c:http_webvpn_find_session[159]
webvpn_session.c:http_webvpn_find_session[159]
webvpn_allocate_auth_struct: net_handle = CC894AA8
webvpn_session.c:http_webvpn_find_session[159]
webvpn_session.c:webvpn_update_idle_time[1463]
Close 1043041832
webvpn_free_auth_struct: net_handle = CC894AA8

Login Failed error while creating a CR using Universe

Hi,
We created an Universe in SAP Business Objects system using SAP BW as source system and we selected sales cube for the universe.
For ex universe name is : xyz
Now i want to use this universe in crystal reports, we are using CR2008.
I logged in to Crystal Reports>Blank Report>Create New Connection>Universes>selected xyz universe and i got the keyfigures and chars in query panel for the selected universe, dragged and dropped some chars and kf's in to result objects.
After this when we click Ok it is giving an error message saying that Login Failed
We are unable to get the solution for this anybody please guide us to solve this.
Regards,
Pradeep.B

Have you checked out this article:
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/504a541a-8a1e-2b10-efa6-af8fb3d44e07
It has a section on troubleshooting Universe connections.

Intermittant (not constant) SQL database ShareWebDb login failed events 3760 and 2424

My Sharepoint 3.0 services that were bundled with SBS 2008 appear to be working fine. Companyweb, etc, all work w/o issue, so I don't want to take violent action, but these errors seem to be accellerating so I would love to know if there is a known
solution.
I typically receive the following (these are in reverse time order, latest at the top, just as they appear in the event log):
Error Event ID: 3760 SQL Database 'ShareWebDb' on SQL Server instance 'np:\\.\pipe\MSSQL$Microsoft##SSEE\sql\query' not found. Additional error information from SQL Server is included below. Cannot open database "ShareWebDb" requested
by the login. The login failed. Login failed for user 'NT AUTHORITY\NETWORK SERVICE'.
one second earlier:Error Event ID: 2424 The update cannot be started because the content sources cannot be accessed. Fix the errors and try the update again. Context: Application 'Search', Catalog 'index file
on the search server Search'
Information Event ID: 18456 No description, here is the Details:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider
Name="MSSQL$MICROSOFT##SSEE" />
<EventID Qualifiers="49152">18456</EventID>
<Level>0</Level>
<Task>4</Task>
<Keywords>0x90000000000000</Keywords>
<TimeCreated
SystemTime="2010-11-12T18:35:06.000Z" />
<EventRecordID>491461</EventRecordID>
<Channel>Application</Channel>
<Computer>myserver.mydomain.local</Computer>
<Security
UserID="S-1-5-20" />
</System>
<EventData>
<Data>NT AUTHORITY\NETWORK SERVICE</Data>
<Data>[CLIENT: <named pipe>]</Data>
<Binary>184800000E000000170000005000450054003300310030005C004D004900430052004F0053004F00460054002300230053005300450045000000070000006D00610073007400650072000000</Binary>
</EventData>
</Event>
Two seconds earlier
Information Event ID 17137 No description, here is the Details:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider
Name="MSSQL$MICROSOFT##SSEE" />
<EventID Qualifiers="16384">17137</EventID>
<Level>4</Level>
<Task>2</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated
SystemTime="2010-11-12T18:35:04.000Z" />
<EventRecordID>491460</EventRecordID>
<Channel>Application</Channel>
<Computer>mysever.mydomain.local</Computer>
<Security
UserID="S-1-5-20" />
</System>
<EventData>
<Data>ShareWebDb</Data>
<Binary>F14200000A000000170000005000450054003300310030005C004D004900430052004F0053004F00460054002300230053005300450045000000070000006D00610073007400650072000000</Binary>
</EventData>
</Event>
I get more 3760 errors than 2424's. However, the
2424's do seem to usually correspond to a 3760 18456 17137 occurance and the
3760 are always preceeded by 18456 17137. I was getting one or two sets a day, lately that has increased to 5 or 10.
I've done a lot of
web research on Sharepoint Errors 3760 and
2424 and I see a number of people are experiencing the the same issue. Most of what I've come across for solutions do not apply, since errors are intermittent, not chronic and my public remote URL has already been added
to BackConnectionHostNames as per:
http://blogs.technet.com/b/sbs/archive/2009/08/05/sharepoint-services-3-search-event-errors-after-an-sbs-2008-update-rollup.aspx
I installed the SQL Server Management Studio Express so I could try to track down the permissions on this database. I see the SQL server instance, MYSERVER\Microsoft##ssee, and it shows as running, but when I try to connect to it I get the following
error: "A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote
connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified) (Microsoft SQL Server, Error: -1)" I'm assuming that is because I don't have access permission for that internal database.
I don't see any errors in the event log related to failed logins or any errors at all from the SQL server, but there are the time matching informational entries right before the error events and lots of other 17137's and 2803's from MSSQL$Microsoft##ssee

Thank you Kevin, that does seem to match my symptoms and I have made the change suggested. Just incase that page becomes unreachable by others, here is the part of the page that applies to this:
Issue:
=========
Receive event error 3760 and 6398 on SBS 2008
Cause:
==========
Issue was caused by incorrect Auto Close option for ShareWebDb database
Solution:
==========
1. On the SBS 2008 server, click Start -> All Programs -> Microsoft SQL Server 2005, right click SQL Server Management Studio Express and choose run as administrator.
NOTE: You must run it as administrator to perform steps below.
2. In the Server Name box, type \\.\pipe\MSSQL$Microsoft##SSEE\sql\query, click connect.
3. Expand Database node and right click the ShareWebDb then choose properties.
4. Click Options in the left pane, in the right pane, please check whether the Auto Close option is set to True, if so, please change it to False.

CUPC 8.6.3 login failed

I am running these versions of CUCM 8.6.2.10000-30, CUP 8.6.4.12900-2 and using CUPC 8.6.3.20802.
Fully AD integration and AD authentication. All userids and passwords are operational.
I keep getting login failed when I try to loginto Cisco Unified Personal Communicator in VOICE LAB ENVIRONMENT

Hi,
The following troubleshooting doc for CUPC should help
http://www.cisco.com/c/en/us/support/docs/voice-unified-communications/unified-presence/97443-cups-cupc-ts.html#topic1
Please check the following sections:
Understanding the CUPC Boot-up Process
Cannot Log In to the CUPC When Troubleshooter Shows All Green
HTH
Manish

Get-splogevent Correlation ID, login failed for "Edit My Profile" in My Profile Error An unexpected error has occurred

Hello Community
    Edit My Profile in My Site displayed an error that "An unexpected error occurred" with a
Correlation ID. I have tried to read the logs in the 14 hive Logs folder but unsuccessfully.
I was able to understand Event Viewer logs, there was supposed to be 4 possibilities
one was wheter UPS was running, the other was clearing the cache and the other 2 I also fixed
I even recreated the Search Service Application, Metadata and UPS but when I fixed the problems
the error still occurred.
    Then I used a Powershell command that displayed output but the Output doesn't make sense
because it is saying the login failed associated with the database that was created by the Search
Service application when it was created.
    But how can that username be related to the Search Service database? Below is the output:
Area     : SharePoint Foundation
Category : Logging Correlation Data
Level    : Medium
EventID : xmnv
Message : Name=Request (GET:http://site/_layouts/EditProfile.aspx?accountname=Server1%User1)
Area     : SharePoint Foundation
Category : Logging Correlation Data
Level    : Medium
EventID : xmnv
Message : Site=/
Area     : SharePoint Server
Category : Database
Level    : High
EventID : 880i
Message : System.Data.SqlClient.SqlException: Cannot open database "SrchSvc_DB_5e06e8c82d5446e39da18d70a5a7e78e" r
           equested by the login. The login failed. Login failed for user Server1\User1.     at System.Data.SqlCli
           ent.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection)     at System.Data.SqlCli
           ent.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj)     at System.Data.SqlClient.TdsParser
           .Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkC
           opyHandler, TdsParserStateObject stateObj)     at System.Data.SqlClient.SqlInternalConnectionTds.CompleteLog
           in(Boolean enlistOK)     at System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo server
           Info, String newPassword, Boolean ignoreSniOpenTimeout, Int64 timerExpire, SqlConnection owningObject)     a
           t System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(String host, String newPassword, Boolean re
           directedUserInstance, SqlConnection owningObject, SqlConnectionString connectionOptions, Int64 timerStart)
              at System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnecti
           onString connectionOptions, String newPassword, Boolean redirectedUserInstance)     at System.Data.SqlClient
           .SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Ob
           ject providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance)     at Sy
           stem.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProvi
           derInfo, DbConnectionPool pool, DbConnection owningConnection)     at System.Data.ProviderBase.DbConnectionF
           actory.CreatePooledConnection(DbConnection owningConnection, DbConnectionPool pool, DbConnectionOptions opti
           ons)     at System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject)     at System.
           Data.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection owningObject)     at System.Data.ProviderB
           ase.DbConnectionPool.GetConnection(DbConnection owningObject)     at System.Data.ProviderBase.DbConnectionFa
           ctory.GetConnection(DbConnection owningConnection)     at System.Data.ProviderBase.DbConnectionClosed.OpenCo
           nnection(DbConnection outerConnection, DbConnectionFactory connectionFactory)     at System.Data.SqlClient.S
           qlConnection.Open()     at Microsoft.Office.Server.Data.SqlSession.OpenConnection()
Area     : SharePoint Server
Category : Database
Level    : High
EventID : 880k
Message : at Microsoft.Office.Server.Data.SqlSession.ExecuteReader(SqlCommand command, CommandBehavior behavior, SqlQu
           eryData monitoringData, Boolean retryForDeadLock)     at Microsoft.Office.Server.Data.SqlSession.ExecuteRead
           er(SqlCommand command, Boolean retryForDeadLock)     at Microsoft.Office.Server.Search.Administration.Schema
           Database.GetSchemaHighLevelInfo()     at Microsoft.Office.Server.Search.Administration.Schema.get_LastChange
           Time()     at Microsoft.Office.Server.Administration.UserProfileApplicationProxy.SynchronizeManagedPropertyM
           appings(Guid partitionID, SearchServiceApplicationProxy searchAppProxy)     at Microsoft.Office.Server.Admin
           istration.UserProfileApplicationProxy.GetManagedPropertyMapping(Guid partitionID, String propertyName)     a
           t Microsoft.Office.Server.UserProfiles.Co...
Area     : SharePoint Server
Category : Database
Level    : High
EventID : 880j
Message : SqlError: 'Cannot open database "SrchSvc_DB_5e06e8c82d5446e39da18d70a5a7e78e" requested by the login. Th
           e login failed.'    Source: '.Net SqlClient Data Provider' Number: 4060 State: 1 Class: 11 Procedure: '' Lin
           eNumber: 65536 Server: Server1\Servers
Area     : SharePoint Server
Category : Database
Level    : High
EventID : 880j
Message : SqlError: 'Login failed for user Server1\User1.'    Source: '.Net SqlClient Data Provider' Number: 18456
            State: 1 Class: 14 Procedure: '' LineNumber: 65536 Server: Server1\Servers
Area     : SharePoint Server
Category : Database
Level    : High
EventID : tzku
Message : ConnectionString: 'Data Source=Server1\Servers;Initial Catalog=SrchSvc_DB_5e06e8c82d5446e39da18d70a5a
           7e78e;Integrated Security=True;Enlist=False;Connect Timeout=15'    ConnectionState: Closed ConnectionTimeout
           : 15
Area     : SharePoint Foundation
Category : Runtime
Level    : Unexpected
EventID : tkau
Message : System.Data.SqlClient.SqlException: Cannot open database "SrchSvc_DB_5e06e8c82d5446e39da18d70a5a7e78e" r
           equested by the login. The login failed. Login failed for user Server1\User1.    at System.Data.SqlClie
           nt.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection)     at System.Data.SqlClie
           nt.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj)     at System.Data.SqlClient.TdsParser.
           Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCo
           pyHandler, TdsParserStateObject stateObj)     at System.Data.SqlClient.SqlInternalConnectionTds.CompleteLogi
           n(Boolean enlistOK)     at System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverI
           nfo, String newPassword, Boolean ignoreSniOpenTimeout, Int64 timerExpire, SqlConnection owningObject)     at
            System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(String host, String newPassword, Boolean red
           irectedUserInstance, SqlConnection owningObject, SqlConnectionString connectionOptions, Int64 timerStart)
             at System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectio
           nString connectionOptions, String newPassword, Boolean redirectedUserInstance)     at System.Data.SqlClient.
           SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Obj
           ect providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance)     at Sys
           tem.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProvid
           erInfo, DbConnectionPool pool, DbConnection owningConnection)     at System.Data.ProviderBase.DbConnectionFa
           ctory.CreatePooledConnection(DbConnection owningConnection, DbConnectionPool pool, DbConnectionOptions optio
           ns)     at System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject)     at System.D
           ata.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection owningObject)     at System.Data.ProviderBa
           se.DbConnectionPool.GetConnection(DbConnection owningObject)     at System.Data.ProviderBase.DbConnectionFac
           tory.GetConnection(DbConnection owningConnection)     at System.Data.ProviderBase.DbConnectionClosed.OpenCon
           nection(DbConnection outerConnection, DbConnectionFactory connectionFactory)     at System.Data.SqlClient.Sq
           lConnection.Open()     at Microsoft.Office.Server.Data.SqlSession.OpenConnection()     at Microsoft.Office.S
           erver.Data.SqlSession.ExecuteReader(SqlCommand command, CommandBehavior behavior, SqlQueryData monitoringDat
           a, Boolean retryForDeadLock)     at Microsoft.Office.Server.Data.SqlSession.ExecuteReader(SqlCommand command
           , Boolean retryForDeadLock)     at Microsoft.Office.Server.Search.Administration.SchemaDatabase.GetSchemaHig
           hLevelInfo()     at Microsoft.Office.Server.Search.Administration.Schema.get_LastChangeTime()     at Microso
           ft.Office.Server.Administration.UserProfileApplicationProxy.SynchronizeManagedPropertyMappings(Guid partitio
           nID, SearchServiceApplicationProxy searchAppProxy)     at Microsoft.Office.Server.Administration.UserProfile
           ApplicationProxy.GetManagedPropertyMapping(Guid partitionID, String propertyName)     at Microsoft.Office.Se
           rver.UserProfiles.CoreProperty.GetManagedPropertyMapping(String propertyName)     at Microsoft.Office.Server
           .UserProfiles.CoreProperty.get_ManagedPropertyName()     at Microsoft.SharePoint.Portal.WebControls.ProfileP
           ropertyLoader.ApplyFormattingEx(ProfileManagerBase objManager, Dictionary`2 highlightedProperties, Property
           prop, Object[] propValue, Boolean ignoreFormat, Boolean allowLinkToSearch)     at Microsoft.SharePoint.Porta
           l.WebControls.ProfileUI.LoadProfileTable()     at Microsoft.SharePoint.Portal.WebControls.ProfileUI.LoadCont
           rol(Object sender, EventArgs e)     at System.EventHandler.Invoke(Object sender, EventArgs e)     at System.
           Web.UI.Control.OnLoad(EventArgs e)     at System.Web.UI.Control.LoadRecursive()     at System.Web.UI.Control
           .LoadRecursive()     at System.Web.UI.Control.LoadRecursive()     at System.Web.UI.Control.LoadRecursive()
              at System.Web.UI.Control.LoadRecursive()     at System.Web.UI.Control.LoadRecursive()     at System.Web.U
           I.Control.LoadRecursive()     at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint
           , Boolean includeStagesAfterAsyncPoint)
Area     : SharePoint Foundation
Category : Monitoring
Level    : Medium
EventID : b4ly
Message : Leaving Monitored Scope (Request (GET:http://site/_layouts/EditProfile.aspx?accountname=Server1%User1)). Execution Time=88.6628049095625
    What does that username have to do with the database created by Search Service Application creation
and why can't I "Edit my profile" in My Profile?
     Thank you
     Shabeaut

Use Netmon to analyze the traffic and understand more on same
Check available DISK SPACE on SharePoint Servers and SQL Server. On SQL Instance especially check if any databases have set Size limits.
Did we modify something on EditProfile.aspx page. Any custom solution deployed related to search
or mysite
http://blogs.msmvps.com/brianmadsen/2011/12/06/sharepoint-2010-connectiontimeout-issues-from-wfe-to-profile-db/
add the SQL Server details into the hosts file on the WFE server.
http://social.technet.microsoft.com/Forums/sharepoint/en-US/7efeefce-129e-4a03-9ff7-900d6168952b/moss-event-id-3351-login-failed-for-user-nt-authorityanonymous-logon?forum=sharepointadminlegacy
Running Windows sharepoint services vss writer service under AD farm account (instead of Local system) is the solution of my issue!
http://social.technet.microsoft.com/Forums/sharepoint/en-US/ca7d53d8-88e2-4a82-9978-8695a7074e5d/application-pool-identity-does-not-have-access-to-profiledb?forum=sharepointadminprevious
If this helped you resolve your issue, please mark it Answered

Cannot open database "ReportServer" requested by the login. The login failed. Login failed for user 'USER LOGON'

I want to grant permissions to all domain users to view reports on our Report Server. Domain users are able to access our Report Server URL and folder, but when they click on a report item they get an error message:
"Cannot open database "ReportServer" requested by the login. The login failed. Login failed for user 'USER LOGON'"
I'm using windows authentication and configured the local service account in SSReportS Config Manager as the credentials to connect to the Report Server DB.
Can someone please help how I should properly do this step by step to give all domain users permissions to view a report in SSRS?
Thanks much! - Rookie DBA

Hi IWAR,
The error message "Cannot open database "ReportServer" requested by the login. The login failed. Login failed for user 'USER LOGON'" means the user 'USER LOGON' does not have permissions to access the "ReportServer" database.
To fix this issue, please verify that the user has a valid database user login. For more details, please refer to the following steps.
In SQL Server Management Studio, open Object Explorer and expand the Databases folder.
Expand the database in which to create the new database user.
Right-click the Security folder, point to New, and then click User.
On the General page, enter a name for the new user in the User name box.
In the Login name box, enter the name of a SQL Server login to map to the database user.
Click OK.
Reference:
http://technet.microsoft.com/en-us/library/ms156468(v=sql.105).aspx
Hope this helps.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Sql Server 2012 Login Failed for user "NT Authority\System"

I have installed SQL Server on a new server. I have been getting the following error on each of the database in it.
Login failed for user 'NT AUTHORITY\SYSTEM'. Reason: Failed to open the explicitly specified database 'ABC'. [CLIENT: xxx.xxx.xxx.xxx]
Here is some information on the instance:
1) Default instance
2) SQL Server, Sql Server Agent, Sql Server Reporting services are running / log on using a domain service account.
3) Sql Server Browser is disabled.
4) SQL Server VSS Writer is running / log on as Local Service.
5) NT AUTHORITY\SYSTEM does exists in Login with just public server roles.
I ran a trace on login failed and I get:
ApplicationName: Microsoft Windows Script Host
and it runs every 15 minutes.
Help please?

Hi,
The error was thrown when the SCOM components connected to the backend SCOM databases.
You can specify a domain account, grant it the sysadmin role and the error should be gone.
Also, see the replies in your previous thread:
http://social.technet.microsoft.com/Forums/en-US/23f6b6cb-ec41-4117-8613-26d24c948827/login-failed-for-user-username-reason-failed-to-open-the-explicitly-specified-database
Thanks.
Tracy Cai
TechNet Community Support

Login failed for user 'NT AUTHORITY\ANONYMOUS

Hi All
I have already gone thru lot of links, So appreciate if i can have some solution
I have 3 servers A, B and C . A and B are in same domain and C is in different domain. and I am sysadmin in all 3 servers and all have trusted connection with each other
1. All have tcp and named pipe enable
2. All 3 servers and all services including browser are up and running
3. When i connect any sql server from any Server using SSMS i am able to connect and (net_transport, auth_scheme = TCP , NTLM).
Now i create linked server at server B to Server C (C domain is different than A and B). When i login on Server B and try to run query on C its working fine. But after remote login to server A and connect sql server at B using SSMS when
i expand linked server to c i cant see databases and query is giving error "Login failed for user 'NT AUTHORITY\ANONYMOUS LOGON'"
I also tried to connect to all 3 server in ssms using forced named pipes but i am getting below error
"provider named pipes provider error 40 - Could not open connection to sql server"
My question :
1. I have to use domain account to use linked server from server A to connect SQLserver B to server C, How this can be done is this related to Double hop ??
2. Why i cant connect using forced Named pipe to any server using SSMS except local host
Thanks Saurabh Sinha http://saurabhsinhainblogs.blogspot.in/ Please click the Mark as answer button and vote as helpful if this reply solves your problem

Hello,
First, it is possible to use Kerberos delegation across trusted domains.
net_transport, auth_scheme = TCP , NTLM
This means something isn't correctly setup as you're defaulting back to NTLM. This should read Kerberos if your SPNs were setup correctly and authenticated properly. Check the SPNs and service accounts.
http://technet.microsoft.com/en-us/library/cc280744(v=SQL.105).aspx
1. I have to use domain account to use linked server from server A to connect SQLserver B to server C, How this can be done is this related to Double hop ??
To go across domains I'm not entirely sure on that part, but I can say it'd probably be easier if you did use a domain account as the service account.
2. Why i cant connect using forced Named pipe to any server using SSMS except local host
I'm not quite sure what you mean here. You can't connect through NP? Why the need for NP at all?
Sean Gallardy | Blog |
Twitter

Error while invoking member: ManagedInit1 - Login failed for user 'SRCAdmin

I am trying to setup a Test Server for BOP 11.60 with MS SQL 2000 in MS Windows Server 2003. After installation, I copied user directory and database from live system to the new Test server. After installed the application andI updated Configuration Manager but when I run Planning Application Services, I have the following message:
System.Exception: Error while invoking member: ManagedInit1 - Login failed for user 'SRCAdmin'. ---> System.Runtime.InteropServices.COMException (0x80131904): Login failed for user 'SRCAdmin'.
   --- End of inner exception stack trace ---
   at SRC.Core.Common.LateBoundHelper.InvokeMethodDirect(String methodName, BindingFlags flags, Object[] args)
   at SRC.Core.Common.LateBoundHelper.InvokeMethod(String methodName, Object[] args)
   at SRC.Core.Host.HostProcess.StartUp()
I can use SRCAdmin user login to SQL Database without any problem but use Adminbop to start the Planning Application Services, I had this message.
Does anyone know what is the problem?
Regards,
Irene

Please, review your FBA configuration https://sharepoint2013fba.codeplex.com/

Service Pack 2 Update - Configuration Failed in Step 5:Products Configuration Wizard (Login Failed)

THIS IS FOR THE TEST ENVIRONMENT, THERE IS ONLY ONE SP SERVER/ONE SQL SERVER
The previous admin before me had already installed OWA Sp2/September 2014 CU on this box without Project Server Sp2 being installed along with it. I am now just updating Project Server to Service Pack 2. I downloaded the file from Microsoft, and installed
the files on the box. I now am running the Products Configuration Wizard to complete the update.
note: the config database version is 14.0.7132.5000 (because of the OWA Sp2
and September cumulative update installed, it does not say Service Pack 2 anywhere)
Please see photos to see the error I am getting. I cannot access the central administration anymore, it is giving me a HTTP Error 503. I need to fix this ASAP! I have tried using another account that should have had permissions but still no dice.
04/13/2015 11:23:43 13 ERR Exception: System.Data.SqlClient.SqlException: Cannot open database "SharePoint_AdminContent_9ddeb31a-419b-4852-b9b5-da18ee2fb7ca" requested by the login.
The login failed.
Login failed for user 'domain\user'.
at System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject)
at System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection)
at System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory
connectionFactory)
at System.Data.SqlClient.SqlConnection.Open()
at Microsoft.SharePoint.Utilities.SqlSession.OpenConnection()
at Microsoft.SharePoint.Utilities.SqlSession.ExecuteReader(SqlCommand command, CommandBehavior behavior, SqlQueryData
monitoringData, Boolean retryForDeadLock)
at Microsoft.SharePoint.Utilities.SqlSession.ExecuteReader(SqlCommand command, Boolean retryForDeadLock)
at Microsoft.SharePoint.Utilities.SqlSession.ExecuteReader(SqlCommand command)
at Microsoft.SharePoint.Upgrade.SPDatabaseSequence.GetVersion(SPDatabase database, Guid id, Version defaultVersion,
SqlSession session, SPDatabaseSequence sequence)
at Microsoft.SharePoint.Upgrade.SPDatabaseSequence.get_SchemaVersion()
at Microsoft.SharePoint.Upgrade.SPSequence.get_IsBackwardsCompatible()
at Microsoft.SharePoint.Upgrade.SPUpgradeSession.IsBackwardsCompatible(Object o, Boolean bRecurse)
at Microsoft.SharePoint.Administration.SPPersistedUpgradableObject.get_IsBackwardsCompatible()
at Microsoft.SharePoint.Administration.SPPersistedUpgradableObject.ValidateBackwardsCompatibility()
at Microsoft.SharePoint.SPSite.PreinitializeServer(SPRequest request)
at Microsoft.SharePoint.SPWeb.InitializeSPRequest()
at Microsoft.SharePoint.SPListCollection.EnsureListsData(Guid webId, String strListName)
at Microsoft.SharePoint.SPListCollection.get_Count()
at Microsoft.SharePoint.Administration.SPAdministrationWebApplication.get_HealthRules()
at Microsoft.SharePoint.Administration.Health.SPHealthAnalyzer.RegisterRules(Assembly assembly)
at Microsoft.Office.InfoPath.Server.Util.HealthAnalyzerRegistration.RegisterHealthRules()
at Microsoft.Office.InfoPath.Server.Administration.FormsService.Update()
at Microsoft.SharePoint.PostSetupConfiguration.ServicesTask.InstallServiceInConfigDB(Boolean provisionTheServiceToo, String
serviceRegistryKeyName)
at Microsoft.SharePoint.PostSetupConfiguration.ServicesTask.InstallServices(Boolean provisionTheServicesToo)
at Microsoft.SharePoint.PostSetupConfiguration.ServicesTask.Run()
at Microsoft.SharePoint.PostSetupConfiguration.TaskThread.ExecuteTask()

Build number hasn't changed since I updated to Sp2. It still is 14.0.7132.5000. Is this supposed to be this way?
Previous admin before me had:
Service Pack 2 for Microsoft Office Web Apps (KB2687470) 64-Bit Edition
14.0.7015.1000
Installed
on all languages (arabic, english, french, german, russian, spanish) but we do not use any of them here.
Also, there are several hotfixes like this (not all show in photo, there are more)
Hotfix for Microsoft Project Server 2010 (KB2883006) 64-Bit Edition
14.0.7132.5000
Installed
Please see photos.

Cannot connect to SERVER. Login failed for user 'DOMAIN\user'. (Microsoft SQL Server, Error 18456) - SQL Server 2012 on Windows Server 2008 R2

I've seen multiple blogs and forums with similar problems and SQL 2012 or 2008. But no solutions that work for me.
I have installed SQL Server in mixed mode (SQL and Windows authentication). I can create new Login accounts in either mode. However, I cannot get an AD security group Login account to work. I am trying to add group 'DOMAIN\Domain Admins' or 'SERVER\Administrators'
as a Login so that any of the domain's administrator accounts can open SQL Server Management Studio and act as an 'sa' account on this server.
I have deleted the SQL account 'DOMAIN\Domain Admins'.
I have restarted SQL.
I have restarted the Win2K8r2 server.
I have launched SSMS as Administrator from the desktop of SERVER.
I have launched SSMS as another user (and used 'DOMAIN\user' to lauch it) from the desktop of SERVER.
I can create a login account named 'DOMAIN\user' (who happens to be a member of the 'DOMAIN\Domain Admins' group) and give this account 'sa' security, and when I do that, this account works as expected...
How do I add a security group as a Login account and give all members of that group the ability to be an 'sa' account?

Hi geoperkins,
Are you getting the following error message?
Error: 18456, Severity: 14, State: 11
Login failed for user <Domain\user>. Reason: Token-based server access validation failed with an infrastructure error.
If that is the case, the issue could be due to that the Windows login has no profile or that permissions could not be checked due to UAC. Please disable UAC firstly and check if it is successful to log in SQL Server.
Another reason could be that the domain controller could not be reached. You may need to resort to re-creating the login. Create a new group in AD, add users to the new group, then add the group to the local admin group and create login for the group in SQL
Server.
There is a connect item describing similar issue for your reference.
https://connect.microsoft.com/SQLServer/feedback/details/680705/cant-login-to-sql-using-windows-authentication-when-user-is-in-a-domain-security-group
For more details about above error, please review the following blog.
http://sqlblogcasts.com/blogs/simons/archive/2011/02/01/solution-login-failed-for-user-x-reason-token-based-server-access-validation-failed-and-error-18456.aspx
Thanks,
Lydia Zhang
Lydia Zhang
TechNet Community Support

ACS SE 4.0 - https login failed

Similar Messages

Maybe you are looking for