ACS Tippingpoint SMS integration
I am configuring Tipping point SMS to authentication users from the Radius ACS, I got the session in the ACS and the error log shows ACS password invalid.
I tried to change the shared secret key and change the SMS type to be Radius IETF and IOS but all trials fail.
Tippingpoint SMS configuration has nothing but change IP - port - shared secret.
I tried also port 1812 - 1645 but both the same.
Moutaz,
I assume you are using acs 4.x software. Are you using network device groups on your ACS configuration, if so then you may want to check the properties of the network device group to make sure there isnt a different shared secret. Remember that the network device group settings always over ride individual settings on the clients themselves.
Thanks,
Tarik
Similar Messages
-
Hi Experts,
I am doing IDoc-XI-File scenario.
Scenario is done.
Now issue is....In any case due to some issue file is not created...My Mean mapping Error OR any Error came in scenario.... So i need to send an Alert SMS to Client in such a case.
My question are :
<b>1. Is it possible That we can do SMS Integration with XI scenario?
2. How can I integrate SMS with this scenario?</b>
Regards,
Umesh LaxkarHi
You can do it using Alerts.
Alerts
http://help.sap.com/saphelp_nw04/helpdata/en/da/a3a7408f031414e10000000a1550b0/frameset.htm
Step by Step Alert Configuration
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--step-by-step
Thanks -
Short Message Service(SMS) Integration in Siebel 8.0
Hi All,
Hi i want to configure Short message service(SMS) integration to our maxhine
please help me any body have doc or link
please help to me
advance thanks:8}
RioYou will need a SMTP to SMS gateway to be able to use SMS with Siebel.
Have a look at:
Siebel Communications Server Administration Guide
http://download.oracle.com/docs/cd/B40099_02/books/PDF/CommSrvAdm.pdf
In that Guide you will find:
Connecting Directly to Wireless Network Operators
http://download.oracle.com/docs/cd/B40099_02/books/CommSrvAdm/CommSrvAdm_Wireless4.html
Axel -
Google Hangouts SMS integration
Does anyone know if the new Google Hangouts will support SMS integration for the Tablet Z? I have a Tablet Z and an Xperia Z. Hangouts with SMS integration works great on the phone and it would be awesome if I were also able to use it on my Tablet. I like the unified platform it provides. My Tablet is an LTE one so it can do SMS.
I'm not sure if they will add support for out tablet as well, but I hope so.
- Community Manager Sony Xperia Support Forum
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page. -
Hi All !!
One of my client requires sms integration with SBO. They have a pvt software which provides gate way to send sms es and xpecting the same to e used with SBO. Can it be integrated?
Kindly say me ...hi,
Check this links
SMS technology
SMS Alert Setup
Jeyakanthan -
Hi All,
I am provided with a third party software ( URL) which provides SMS services. Kindly let me know how to configure through SCOT and steps. I have gone through various notes as well.
As I am new to this, further details are appreciated.
Detailed configuration steps/screen shots/pdf/any collections ect..
Regards,
MadhuHi Madhu,
I recommend you to visit the following website to get information about how to add SMS functionality to a CRM application:
http://www.sms-integration.com/p-48-sms.html
I hope this helps you.
Regards,
Altair -
HI to all,
can it possible if sms integration with sap business one. means if i create a/r invoice if i add the document automaticlly send sms to the customer in that sms following matter to be send
invoice number,posting date,due date,invoice amount.can it possible .if yes then what is requirement for that.pls reply i will waiting for your reply...
Regards,
vishal.hi
1.Create class library in Visual Studio 2005 C# Express Edition create assembley SQLCore
Write code:
using System;
using System.IO;
using System.Text;
using System.Net;
namespace SQLCore
public static class SMS
public static void PlusSend(string Sender, string Recipient, string Message)
string Destination = "http://www.text.plusgsm.pl/sms/sendsms.php";
string Data = "?tprefix=" + Recipient.Substring(0, 3) + "&numer=" + Recipient + "&odkogo=" + Sender + "&termin=0&tekst=" + Message + "&godz=00&min=00";
SMS.PostStringToURI(Destination, Data);
private static void PostStringToURI(string URI, string String)
byte[] Bytes = Encoding.UTF8.GetBytes(String);
HttpWebRequest Request = (HttpWebRequest)WebRequest.Create(URI);
Request.Method = "POST";
Request.ContentLength = Bytes.Length;
Request.ContentType = "application/x-www-form-urlencoded";
Stream RequestStream = Request.GetRequestStream();
RequestStream.Write(Bytes, 0, Bytes.Length);
HttpWebResponse Response = (HttpWebResponse)Request.GetResponse();
if (Response.StatusCode != HttpStatusCode.OK)
string Message = String.Format(
"POST failed. Response staus {0}.",
Response.StatusCode);
throw new ApplicationException(Message);
for your localization you have to find your own sms gateway.
2.Compile project .
3.Copy dll to C:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\Binn
4. Set SETTRUSTWORTHY on true using
ALTER DATABASE databasename SETTRUSTWORTHYON;
go;
[more info about SETTRUSTWORTHY|http://msdn2.microsoft.com/en-us/library/ms187861.aspx ]
5.Create Assembly for your dll.
CREATE ASSEMBLY SQLCore
FROM 'C:\Program Files\Microsoft SQLServer\MSSQL.1\MSSQL\Binn\SQLCore.dll'
WITH PERMISSION_SET = EXTERNAL_ACCESS
6. Create Procedure
CREATE PROCEDURE dbo.[PlusSend](@Sender nvarchar(max), @Recipient nvarchar(max), Message nvarchar(max))
AS EXTERNAL NAME SQLCore.[SQLCore.SMS].PlusSend
go;
7 .Fially execute using
EXECUTE dbo.[PlusSend]('SENDER'','PHONE NUMBER','Message')
Insert it in transaction notification.
Hope it helps. -
Hello Everyone,
Can a single ACS appliance be integrated with a diff OU in the AD (maybe with a diff IP address range). If yes, how?
Thanks,
RishiRishi,
Are you looking to leverage certain group in AD to be assigned to a specific subnet? If yes, then this can be done through dynamic vlan assignment.
Thanks,
Tarik Admani -
Hi,
Is it possible to integrate ACS and CAR with DB-2 Database and if yes, are there any limitations or issues related to that? Does CAR or ACS loose any functionality in such integration?
I am not looking for detailed process of the integration at this time, all I want to know is if it is supported and are there any issues.
Thanks,
Habib U DashtiHi Habib,
Yes, ACS can be integrated with DB-2, as ACS is ODBC compliant and so as DB-2, The other way round is that you can convert DB-2 database in flat file structure and import it into ACS database. Regarding limitations or issues i do not have any info.
And CAR has its own database & does not support DB-2.
Thanks. -
Autheticating useing Cisco ACS 4.2 integrated with Active Directory 2003
How do i check that users are Autheticated useing Cisco ACS 4.2 integrated with Active Directory 2003, any one help me in this thanks
You can't actually see the user's membership from ACS. All you can do, create group-mapping under external database >> group mapping section. This would give you an option to map external (AD) group with an Internal group.The group memberrship need to be modified under Active Directory.
Once user is succussfully authenticated and learned as a dynamic user in ACS user setup database, it would be mapped with an ACS internal group based on group mapping we did.
Let me know if you have any doubts.
Regards,
Jatin -
ACS 5.3 Integration With RSA
Hi People,
I have Integrated the ACS 5.3 with AD.
Now my next goal is to Integrate ACS with RSA in such a way that all my Cisco devices should use the username and password from the AD.
The enable privilege level should come from the RSA Token OTP.
Is it possible to do such a thing with ACS 5.3???
If so how could i do it???
Thanks,
ManojI think that can try and make a rule in the identity policy based on the Service attribute in the TACACS+ dictionary
(this is not tested and based on my recollection so would need your verification)
1) Create a custom condition for the service attribute in TACACS+ dictionary
Policy Elements > Session Conditions > Custom
Create: Dictionary: TACACS+ ; Attribute:Service
2) Utilize in a rule in Device Admin identity policy
Access Policies > Access Services > Default Device Admin > Identity
Sselect a rule based
Customize based on condition in 1
Create a rule for when Service is "Enable". Select identity source as RSA in this case -
TACACS enable password is not working after completing ACS & MS AD integration
Enable password for (Router, Switches) is working fine if identify source is "Internal Users", unfortunately after completed the integration between ACS to MS AD, and change the Identity source to "AD1" I got the following result
1. able to access network device (cisco switch) using MS AD username and password via SSH/Telnet.
2. Enable password is not working (using the same user password configured in MS AD.
3. When I revert back and change the ACS identity source from "AD1" to "Internal Users" enable password is working fine.
Switch Tacacs Configuration
aaa new-model
aaa authentication login default none
aaa authentication login ACS group tacacs+ local
aaa authentication enable default group tacacs+ enable
aaa authorization exec ACS group tacacs+ local
aaa authorization commands 15 ACS group tacacs+ local
aaa accounting exec ACS start-stop group tacacs+
aaa accounting commands 15 ACS start-stop group tacacs+
aaa authorization console
aaa session-id common
tacacs-server host 10.X.Y.11
tacacs-server timeout 20
tacacs-server directed-request
tacacs-server key gacakey
line vty 0 4
session-timeout 5
access-class 5 in
exec-timeout 5 0
login authentication ACS
authorization commands 15 ACS
authorization exec ACS
accounting commands 15 ACS
accounting exec ACS
logging synchronous
This is my first ACS - AD integration experience, hoping to fix this issue with your support, thanks in advance.
Regards,Hi Edward,
I created a new shell profiles named "root" as the default one "Permit Access" can't be access or modified, underneath the steps I've made.
1. Create a new shell profile name "root" with max privilege of 15. And then used it in "Default Device Admin/Authorization/Rule-1" shell profile - see attached file for more details.
2. Telnet the Switch and then Issue "debug aaa authentication" using both "Root Shell" and "Permit Access" applied in Rule-1 profile.
Note:
I also attached here the captured screen and debug result for the "shell profiles" -
Adobe connect sms integration ?
hello dear friends
is there any adobe connect sms gateway integration ?
or is there any web service of adobe connect 9 for send meeting invitation with sms?
i want sms meeting invitation to host and participant every week ?
have a good dayHI,
Yes, this is Possible. You can use AppIntegrator Iview and Pass the URL for your Adobe Connect.
Thanks and Regards
Puneet -
CSM4.7 to ACS 5.5 integration
Need help on CSM to ACS integration, I have integrated but when I am previewing and firewall from CSM Client it always shows me all configurations which is already deployed.
Thanks & Regards,
YogeshHi Prasan, you will need to be more specific for us to be able to provide you a better answer. Some quick things that come to my mind are:
1. ACS 5 now runs on Linux vs Windows
2. ACS 5 requires licensing (There is "base" for up to 500 devices and "large" for deployments with 500+ devices)
3. You cannot directly upgrade a 4.x node to 5.x. You will either need to re-build from scratch or use the migration utility
4. ACS 5 can cluster several ISE nodes in a way that you only configure from a single console and all of the configuration changes are replicated to the rest of the nodes
Here is a good link to review as well:
http://www.cisco.com/c/en/us/td/docs/net_mgmt/cisco_secure_access_control_system/5-5/user/guide/acsuserguide/migrate.html
Thank you for rating helpful posts! -
10.4.3. and Address Book's SMS Integration with SE K750i
Hi,
This was a much loved feature in my Panther days and as such I totally cannot understand how, 3 updates later - in Tiger, Apple still hasn't gotten round to solving the "send SMS" feature in Address Book to work with Sony Ericsson K750i.
I had this problem with my PB 15" - 1.33GHz (where I upgraded from Panther to Tiger in clean install), and I STILL have this problem with my brand new, 4 day old PB 15" - 1.67GHz. Can't figure it out
I know there is a "workaround" on the net that involves changing the package contents of the SE K750i config files but I rather not get into that anymore since it will probably conflict with an Apple-side update in the future.
But the question is When???
Anyone with this dilemma?
Regards
N5Exact same problem here with my Razr V3.
It's disappointing that the phone is featured in a photo on the iSync page, but is not supported in Address Book.
Take a peek at Address Book.app/Contents/Resources/Telephony.Bundle/Contents/Resources/ABDeviceCommand Sets.plist .
So, who knows the proper strings for the Razr V3? I wonder if they can be pulled from BluePhoneElite. .
- Eric
15" 1.67 Powerbook, 40G 3G iPod, 4G Nano Mac OS X (10.4.3)
Maybe you are looking for
-
SharePoint 2010 + SQL 2008 + DPM 2012 Backup Failures
I have a single SharePoint 2010 WFE and a SQL 2008 server backend. Since configuring DPM to run the SharePoint backup through the WFE, I have had no success with backups. DPM Reports: The VSS application writer or the VSS provider is in a bad state.
-
Vista-64 and Linksys Wireless Print Server to cp1215
I have Vista-64 OS I have a HP CP1215 Color Laserjet USB attached to a Wireless Linksys Print Server (WPSM54G). HP website shows 2 different drivers for this printer for Vista-64: 1. Print Driver Package 2. PNP Print Driver Package My question is, wh
-
hi, when i do, submiting the page i'm able to set the cookie value.I'm not getting any messages. But the Same time when i call the proceudre with parameters from the URL i'm not able to store the cookie value. It display's the message like this and t
-
ISE won't match configured profiling policy
I'm trying to match Cisco LAPs (any kind of) using profiling in my AuthZ policies, yet the specific AP (a 1252 model) always gets profiled as 'Cisco-Aironet-AP-1250' instead of the desired, more generic 'Cisco-AIR-LAP' policy. To change this behaviou
-
Vendor Balances transaction wise.
Hello Every One, I am novice SAP. So please let me know to check ledger of Vendor along transaction wise balances.