ACS Unknown User Discovery

All,
Can ACS send an event/snmp trap when it discovers unknown users?
How will ACS administrators get notified when ACS discovers unknown users?
Stephanie

Hi Stephanie,
Unfortunately there is no way to do this ACS use SNMP only for logging.
ACS does not have this kind of alert. I will suggest to contact your account manager and open a new feature request.
Regards,

Similar Messages

ACS issue - External unknown user policy database

HI all,
Is there any way I can get back information from an external user database into ACS:
I have 2 ssids, both on seperate IP address ranges. I have an external unknown user policy to pass username and passwords to. In the database there are flags which distinguish between two different types of users. Can I pass this 'flag' back to ACS somehow. When a user tries to logon to one SSID I want ACS to somehow check this flag and decide if that user can access that SSID.
Any ideas ??

What is your external database?

802.1x auth via ACS through unknown user policy - multiple directories?

A customer has an LDAP directory as well as a Novell NDS directory.
MAC clients authenticate to IPlanet LDAP.
Windows users authenticate to Novell NDS.
Is there any way to use multiple SSIDs and the unknown user policy to authenticate users against their appropriate directories?
Thanks,
Tim

Actually, you can. You can manually add users to the ACS database and specify which external database to use. Take a look at the URL below. It is on adding users to the ACS database using the CSUtil.exe program on the ACS server. The import file that is read allows you to specify which external database type to query for the users authentication.
http://www.cisco.com/univercd/cc/td/doc/product/access/acs_soft/csacs4nt/acs33/user/ae.htm#wp365101
Steve

TACACS "fail unknown users" after upgrade to ACS 3.3

Basic config issue is :
1) User Account is added to ACS 3.3
2) User Account is added to Group with correct Privilege Levels
3) User Password Authentication: is listed as "Windows Database"
4) TACACS+ Enable Control: is set to user group settings
5) And TACACS+ Enable is also set to "Windows Database"
In External DB all windows Domains are listed (but not down to specific group mapping)
Here is the problem, every thing works fine.
Users can log onto router in User mode (using domain password) & change to EN mode (using domain password)
As long as the "Unknown user policy" is set to check against "Windows". this works.
But if it is set to "fail Unknown users" then no one can gain access

Hi Michael,
We opened a TAC case ans was given the following info;
CSCef84196
First Found-in Version 3.3(1)
Symptom:
users created on acs but mapped to external DB manually fail authentication
Condition:
-this happens when unkown user policy is set to fail authentication attempt.
Workaround:
- set unkown policy to check external database.
if dynamic users aren't desired to authenticate, you can map the external DB to a disabled group.
and put the manually mapped users in an enabled group.
Ther is no fix available yet!

"Logon failure: unknown user name or bad password" even with correct Credentials

I have networked PCs before many times successfully, so this is not my first time trying to network PCs in a home environment. Though I’m wondering if Windows 8.1 is part of the problem.
I would have thought that for sure, until one of the new laptops running W8.1 would not connect to any of the other three PCs/Laptops running W8.1. Yet these other three W8.1 PCs/Laptops CAN connect to this laptop. Then it gets a little more interesting:
this same laptop that couldn’t connect to those three W8.1 PCs/Laptops, CAN connect to a Windows 7 desktop, and a XP Laptop, and those two can also connect back to it without issue. It’s almost like my network is divided in half, and only half can talk to
each other. But then when I thought it couldn’t get any more interesting, I realized the first three W8.1 PCs/Laptops can talk to the others, it’s just that the others (W8.1 Laptop, W7 Desktop, XP Laptop) can’t talk back to them without getting the error,
"Logon failure: unknown user name or bad password” even though the username and password are 100% correct.
I don’t fully understand this error, because on the surface, it’s just WRONG!
My username and password are correct, but it appears something somewhere is interfering or hijacking the authentication process. Three of the computers (laptops) are brand new, just purchased last week and setup this week. The HostPC is also fairly new,
just purchased last month.
I am not using a HomeGroup, and have removed all computers that were part of a HomeGroup. I have enabled file sharing and network discovery and enabled “Use user accounts and passwords to connect to other computers” on all PCs.
I have DSL and am using the wireless modem provided by my ISP which has router functionality built into it. It is a Sagemcom Model: F@ST 1704N.
All computers are connected wirelessly. Time is correct on all PCs. I cannot use Group Policy, since they're all Standard or Home edition. DHCP is enabled and all computers are on the same subnet, using the 192.168.254.x range of ip addresses.
The six computers are as follows: (I figured this may make is easier to visualize the layout)
HostPC: HP Desktop W8.1
PC Name: DrsBlend
U/N: DrsBlend p/w: 123456 (not showing my real password)
PC1: HP Laptop W8.1
PC Name: DrsBlend-1
U/N: DrsBlend    P/W: 123456
PC2: HP Laptop W8.1
PC Name: DrsBlend-2
U/N: DrsBlend    P/W: 123456
PC3: HP Laptop W8.1
PC Name: DrsBlend-3
U/N: DrsBlend    P/W: 123456
PC4: HP Desktop W7 SP1
PC Name: DrsBlend-4
U/N: DrsBlend    P/W: 123456
PC5: Dell Laptop XP SP3
PC Name: DrsBlend-5
U/N: DrsBlend    P/W: 123456
Every PC stated above has the same user name and password and is logged-in with the username, DrsBlend and the password 123456. The "Logon failure: unknown user name or bad password” happens when trying to access HostPC, PC1, or PC2 from PC3, PC4, or
PC5.
The HostPC can see and connect to all the PCs, but only PC1 and PC2 can talk back or access the HostPC.
It’s like the HostPC and PC1, and PC2 are in their own little clique, and can talk back and forth to each other. Those three PCs can also talk to PC3, PC4, and PC5 as well, but PC3, PC4, and PC5 cannot talk back to them (HostPC, PC1, PC2).
Profile corruption? I would have entertained that thought, but the fact the first three PCs can access and talk to one another kind of defeats that idea, and the fact the PCs were just recently setup.
Firewall? Disabled, and disabled TrendMicro with no change. With them on/off, the first three PCs can still talk to each other and the rest of the PCs.
Anyone have any additional suggestions?

Hi，
How did you connect to other PCs? Do you use RDP to connect to other PCs? If so, check the version of the RDP, as I know, some low version RDP can't connect to higher Windows like 8.1.
And could you please tell us the detailed information about how the six PCs connect to the home network?
Can PC1, PC2, PC3 ping back to host PC, PC1 and PC2?
You can also run command " rundll32.exe keymgr.dll, KRShowKeyMgr " view the credentials stored in your PC,check whether this issue is related with some old credentials stored in your system.
Yolanda Zhu
TechNet Community Support

EAP-TLS & Unknown User Policy

I setting up an WLC with the client using EAP-TLS (machine authentication only). We are using ACS 3.2 which is part of AD. The problem is that the ACS is being used to authorize users for Internet Access also.
So if I enable the Unknown User Policy to AD for EAP-TLS machine authentication, this will break what is being done for Internet Access.
Any ideas that don't include entering every machine and user name in the local database? I was wondering if I could setup a wildcard user of host/* that points to AD.
Is there a way to make this work without configuring the Unknown user policy to point to AD?
Thank you!

Log onto the ACS server itself as the local administrator.
Browse to the Bin directory in the ACS program directory.
Run the program there called CSSupport.
Select "Run Wizard" and click Next.
Check all the boxes and create the file for last 3 days and clickNext.
Again click Next.
Select "Set Diagnostic Log Verbosity to Maximum." and click Next.
Click Next, then click Finish.
In an environment where there is more than one global catalog server for the domain, ACS will not search for the secondary" catalog server if the "primary" goes down.
Condition: ACS is installed on a domain member server.
Workaround: Re-start csauth.exe.Let me know if restarting CSAuth makes any difference

The report server has encountered a configuration error. Logon failed for the unattended execution account. (rsServerConfigurationError) Log on failed. Ensure the user name and password are correct. (rsLogonFailed) Logon failure: unknown user name or bad

The report server has encountered a configuration error. Logon failed for the unattended execution account. (rsServerConfigurationError)
Log on failed. Ensure the user name and password are correct. (rsLogonFailed)
Logon failure: unknown user name or bad password
am using Windows integrated security,version of my sql server 2008R2
I have go throgh the different articuls, they have given different answers,
So any one give me the exact soluction for this problem,
Using service account then i will get the soluction or what?
pls help me out it is urgent based.
Regards
Thanks!

Hi Ychinnari,
I have tested on my local environment and can reproduce the issue, as
Vaishu00547 mentioned that the issue can be caused by the Execution Account you have configured in the Reporting Services Configuration Manager is not correct, Please update the Username and Password and restart the reporting services.
Please also find more details information about when to use the execution account, if possible,please also not specify this account:
This account is used under special circumstances when other sources of credentials are not available:
When the report server connects to a data source that does not require credentials. Examples of data sources that might not require credentials include XML documents and some client-side database applications.
When the report server connects to another server to retrieve external image files or other resources that are referenced in a report.
Execution Account (SSRS Native Mode)
If you still have any problem, please feel free to ask.
Regards
Vicky Liu
Vicky Liu
TechNet Community Support

How do I remove (unknown) user in permissions & sharing, please?

I re-installed OS X with archive install. I am reinstalling preferences, etc... using Time Machine and my archived Previous System folder. However, many folders are marked and I have an (unknown) user with Read&Write Priveleges in Sharing & Permissions for files within 'Previous System' folders. I am unable to remove (unknown) with - and I have no option for setting 'No Access' to this user.
How do I remove (unknown) user with Read&Write Priveleges in Permissions?
Using Terminal, I have ascertained that my uid=501
Macintosh:~ symone$ ls -ladeO /Previous\ Systems.localized/Previous\ System\ 1/Users/symone/Library/Audio
drwx------+ 5 502 staff - 170 8 Sep 2011 /Previous Systems.localized/Previous System 1/Users/symone/Library/Audio
0: group:everyone deny delete
Macintosh:~ symone$ id
uid=501(symone) gid=501(symone) groups=501(symone),98(_lpadmin),81(_appserveradm),79(_appserverusr),80(admin)

Hmmm, doesn't sound good for your drive.
Check the S.M.A.R.T. status of the drive in Disk Utilty by highlighting the Drive & looking at the bottom of the window.
Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.

Issue with "unknown user type 6" on Coherence 3.5.2

Having an issue with a cluster which is running using an internally developed cluster starter tool. This tool, and the associated cluster, all use POF, and upon attempting to connect a non-storing member to the cluster from java, the following exception is raised...
2011-07-11 15:54:58.338/2.469 Oracle Coherence GE 3.5.2/463p2 <Error> (thread=Cluster, member=n/a): This cluster node is
configured to use serializer com.tangosol.io.pof.ConfigurablePofContext {location=application-pof-config.xml}, which ap
pears to be different from the serializer used by Member(Id=1, Timestamp=2011-07-11 15:34:30.779, Address=10.74.82.193:8
088, MachineId=11188, Location=site:INTRANET.BARCAPINT.COM,machine:ldnpsm020006423,process:80976,member:ldnpsm020006423:
cacheserver:1).
java.io.StreamCorruptedException: unknown user type: 6
at com.tangosol.io.pof.PofBufferReader.readAsObject(PofBufferReader.java:3289)
at com.tangosol.io.pof.PofBufferReader.readObject(PofBufferReader.java:2600)
at com.tangosol.io.pof.ConfigurablePofContext.deserialize(ConfigurablePofContext.java:348)
at com.tangosol.coherence.component.util.daemon.queueProcessor.Service.readObject(Service.CDB:4)
at com.tangosol.coherence.component.util.daemon.queueProcessor.service.Grid$ServiceConfigMap.readObject(Grid.CDB
:1)
at com.tangosol.coherence.component.util.daemon.queueProcessor.service.Grid$MemberConfigResponse.read(Grid.CDB:1
3)
at com.tangosol.coherence.component.util.daemon.queueProcessor.service.Grid.onNotify(Grid.CDB:123)
at com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.ClusterService.onNotify(ClusterServi
ce.CDB:3)
at com.tangosol.coherence.component.util.Daemon.run(Daemon.CDB:42)
at java.lang.Thread.run(Thread.java:619)
There is no serialiser configured in the cache config, instead we just set tangosol.pof.enabled=true, and set the pof config file to what is seen above. The thing which is very confusing about this error is that unlike other clients which we connect, and in fact the servers they connect to, this client never attempts to load the cache configuration file. The point at which this should happen, prior to pof loading, shows:
2011-07-11 15:54:57.260/1.391 Oracle Coherence GE 3.5.2/463p2 <Info> (thread=Main Thread, member=n/a): Loaded cache conf
iguration from "jar:file:/C:/Program%20Files/Oracle/coherence/3.5.2b463P2/lib/coherence.jar!/reports/report-group.xml"
I have tried every combination of classpath entries I can think of, and no matter what, it never shows an attempt to load the application-cache-config.xml supplied in the startup. Does anyone have any experience with something like this?

I guess your non-storing JAVA code does not specify -Dtangosol.pof.enabled=true and the -Dtangosol.pof.config =<POF file location> on joining the cluster. Post the startup java command and the complete logs.
If application-cache-config is not loaded then coherence-cache-config.xml should be loaded by default and set -Dtangosol.coherence.cacheconfig=<application-cache-config>
Cheers,
NJ

Error: sql.SQLError: [-4008] (at 1) Unknown user name/password combination

Hello Experts,
After a Test refresh for SCM system, we restored Livecache. The database has been changed and starts using database manager, during registration (Register LCApps) it gives the following error:
Logical Command: DBMRFC
Parameter: exec_lcinit register
Name and Server     : LCQ - dusepierp12
DBMRFC Function     : DBM_EXECUTE
Command             : exec_lcinit register
Error               : DBM Error
Return Code         :     -24964
Error Message       : ERR_EXECUTE: error in program execution#
0,sap\lcinit LCQ register -uDBM , -uDBA , -uSQL ,
liveCache LCQ (register)
The liveCache state is ONLINE
DBMServer 7.6.04   Build 009-123-182-193
Creating liveCache application procedures
ERROR : liveCache LCQ not registered (see "s:\sapdb\data\wrk\LCQ\lcinit.log").
START *****************************
liveCache LCQ (register)
Thu 07/30/2009
10:26 PM
installation path = S:\sapdb\LCQ\db
OK
DBMServer 7.6.04   Build 009-123-182-193
Creating liveCache application procedures
ERR
-24964,ERR_EXECUTE: error in program execution
1,""S:\sapdb\LCQ\db\bin\x_python" "S:\sapdb\LCQ\db\env\lapps.py" -R "S:\sapdb\LCQ\db" -d LCQ -u DBADMIN,*"
Traceback----
Error----
sql.SQLError: [-4008] (at 1) Unknown user name/password combination
Traceback (most recent call last):
File "S:\sapdb\LCQ\db\env\lapps.py", line 38, in ?
    connectAndInstall (install, install.__doc__)
File "S:\sapdb\LCQ\db\env\installib.py", line 398, in connectAndInstall
    session = connect (options)
File "S:\sapdb\LCQ\db\env\installib.py", line 350, in connect
    alterUserNotExclusive(options)
File "S:\sapdb\LCQ\db\env\installib.py", line 338, in alterUserNotExclusive
    session.release()
AttributeError: 'NoneType' object has no attribute 'release'
ERROR : liveCache LCQ not registered
Thu 07/30/2009
10:26 PM
END ******************************
Many Thanks,
TIA,
Nisch

Nischal Mahakal wrote:>
> Hello Experts,
>
> After a Test refresh for SCM system, we restored Livecache. The database has been changed and starts using database manager, during registration (Register LCApps) it gives the following error:
> -24964,ERR_EXECUTE: error in program execution
> 1,""S:\sapdb\LCQ\db\bin\x_python" "S:\sapdb\LCQ\db\env\lapps.py" -R "S:\sapdb\LCQ\db" -d LCQ -u DBADMIN,*"
> -
Traceback----
Hi there,
looks like you entered "DBADMIN" when you created the liveCache instance in DBMGUI as the DBM Operator.
For SAP installations, this user is always named "CONTROL".
So, drop the instance again, recreate it with "CONTROL" and re-do the recovery of the liveCache backup.
regards,
Lars

Unknown User Error Message, Do I have a Virus?

Today I checked my AOL email and had over 40 messages in my inbox all within a very short time frame. I recognize most of the email addresses that came back with the Unknown User messages. I did not send any emails out and there is no record in my sent box that says that I send those emails. Could I have a Virus? I always thought mac computers don't get viruses. I am concern that I have one and if I do what should I do. I did change my password to my email after it happen. Here is a copy of one of the email error messages that I got. For the protection of my friends email and mine I changed it in this copy of the email. Friends email- [email protected], My email- [email protected]. I also got one additional email that was sent to me, from me that I never sent. Again no email in my sent box and of course I did not click on the link that was in that email. I will also post that email but will change only my email. Please do not click on the link since I am thinking it might be a virus but I wanted to include it, hoping it will help. Thank you in advance for your help.
ERROR MESSAGE:
* ATTENTION *
Your e-mail is being returned to you because there was a problem with its
delivery. The address which was undeliverable is listed in the section
labeled: "----- The following addresses had permanent fatal errors -----".
The reason your mail is being returned to you is listed in the section
labeled: "----- Transcript of Session Follows -----".
The line beginning with "<<<" describes the specific reason your e-mail could
not be delivered. The next line contains a second error message which is a
general translation for other e-mail servers.
Please direct further questions regarding this message to the e-mail
administrator or Postmaster at that destination.
--AOL Postmaster
----- The following addresses had permanent fatal errors -----
<[email protected]>
(reason: 550 5.0.0 <[email protected]>... User unknown)
----- Transcript of session follows -----
... while talking to mx1.webexone.com.:
DATA
<<< 550 5.0.0 <[email protected]>... User unknown
550 5.1.1 <[email protected]>... User unknown
<<< 503 5.0.0 Need RCPT (recipient)
Final-Recipient: RFC822; [email protected]
Action: failed
Status: 5.0.0
Remote-MTA: DNS; mx1.webexone.com
Diagnostic-Code: SMTP; 550 5.0.0 <[email protected]>... User unknown
Last-Attempt-Date: Thu, 7 Oct 2010 18:27:52 -0400
Return-Path: <[email protected]>
Received: from imo-ma04.mx.aol.com (imo-ma04.mx.aol.com [64.12.78.139])
by imr-da06.mx.aol.com (8.14.1/8.14.1) with ESMTP id o97MRjkm008439
for <[email protected]>; Thu, 7 Oct 2010 18:27:45 -0400
Received: from [email protected]
by imo-ma04.mx.aol.com (mailoutv42.9.) id z.ee2.72ae6c8 (43849)
for <[email protected]>; Thu, 7 Oct 2010 18:27:41 -0400 (EDT)
Received: from smtprly-mc01.mx.aol.com (smtprly-mc01.mx.aol.com [64.12.95.97]) by cia-dc04.mx.aol.com (v129.4) with ESMTP id MAILCIADC046-d3c94cae49563c4; Thu, 07 Oct 2010 18:27:37 -0400
Received: from webmail-d010 (webmail-d010.sim.aol.com [205.188.181.34]) by smtprly-mc01.mx.aol.com (v129.4) with ESMTP id MAILSMTPRLYMC013-d3c94cae49563c4; Thu, 07 Oct 2010 18:27:34 -0400
To: [email protected]
Content-Transfer-Encoding: quoted-printable
Subject:
Date: Thu, 07 Oct 2010 18:27:34 -0400
X-MB-Message-Source: WebUI
X-AOL-IP: 41.215.217.83
X-MB-Message-Type: User
MIME-Version: 1.0
From: [email protected]
Content-Type: text/plain; charset="us-ascii"; format=flowed
X-Mailer: AOL Webmail 32761-PHONE
Received: from 41.215.217.83 by webmail-d010.sysops.aol.com (205.188.181.34) with HTTP (WebMailUI); Thu, 07 Oct 2010 18:27:34 -0400
Message-Id: <[email protected]>
X-Spam-Flag:NO
X-AOL-SENDER: [email protected]
The email that I got that was from me, to me. Again do not open the link, I would feel horrible if caused anyones computer harm, again I also changed my email address for the posting.
hi! Jen!http://made-of.fr/to.php Best regards, ,[email protected]

The emails are almost certainly coming from someone else's computer, not from your account. This will be definite if you can't see any of these emails in any of your "sent mail" folders and only are finding out about it by mail bouncing back or someone telling you that they've received such an email from your email address.
This type of infection, which exclusively infests Windows systems, uses a technique known as "spoofing," (mentioned by the other posters) by which the virus or worm randomly selects an email address it finds on an infected computer. The virus/worm uses this address as the "From" address when it performs its mass-mailing routine rather than using the real email address of the user of the infected system. If your address happens to be the one randomly chosen, then anyone receiving one of these emails sees your email address as the apparent sender. In addition, if any messages bounce back (either because the address is no longer valid or the mail server finds the virus and rejects the message), you get hit with the bounce rather than the actual (unknowing) sender, even though the messages didn't come from your system and may be from addresses you've never heard of.
Here's an example; Jane is using a computer infected with a Windows email virus or worm. Jane is either not using an antivirus program or does not have current virus definitions. When the virus/worm activates and runs, it randomly searches the Windows address book and finds the email address of Bill. The worm inserts Bill's email address into the "From" portion of an infected message, which it then sends to Janet. Janet then contacts Bill and complains that he sent her an infected message. When Bill scans his computer, the virus checker does not find anything, because his computer is not infected.
There's nothing you can do if, as appears to be the case, the emails aren't coming from you. All you can do is notify all your friends and colleagues who have Windows systems and who would know your email address and get them to update their antivirus protection.
Regards.

My PC cannot find my Mac and also it ask for a password and I put it in and tell Logon failure:unknown user name or bad password

I need some help on my MAC about them problem that I have and the question is: My PC cannot find my MAC and it ask a question about putting in the password and I did it come back and said: Logon failure: unknown user name or bad password.
Thank You
Lumpy

You have to explain a little more fully what you are trying to do and what protocol. Whats your set up?

Why do I get "Unknown user name or bad password" on Windows 7 when trying to connect to an SMB share on my Mac?

Before installing the update to 10.7.3 I could connect to an SMB share on my Mac from Windows 7 but I can't any longer. When I try I get the error "Unknown user name or bad password" on the Windows 7 system.
When I try to connect using the "net use..." command I get the error: "System error 86 has occurred".
Does anyone know how to resolve this? What really confuses me is that it was working fine until I installed the update to 10.7.3.

Check the Wins Tab in the Advanced section of Network in system preferences.
If you don't have the same workgroup name and the correct NetBIOS name showing up in the WINS tab you will get the Bad username or password.
I know I deal with this everyday.
There is something wrong with Lion and it does not automatically fill in those entries in the WINS tab.
What I have to do on every reboot/startup is open System preferences go to Sharing and uncheck File Sharing then recheck it. That will fill in the WINS tab entries.

When i send a mail to the user of messaging server, it returns saying unknown user.

I am trying to add a mail user to iplanet messaging server 5.1, I am able to configure that user from my mail client (outlook) but when i send mail to that user, it returns saying unknown user. I can see that user in LDAP data base/

This could be symptomatic of the iMS 5.1 server not yet having done a full synch to its alias database of the LDAP server. This is done every 24 hours (default) at 2 or 3 am. You can synch manually by running the "imsimta dirsync -F" command.

"unknown user type" exception when the object don't exist for i/p key.

Hi
I'm using Coherence REST service(comes with the Coherence bundle) to validate my cache data.
When I hit the cache for a valid key, I get data returned back. But for the object that don't exist in the cache I get "Internal Server" error.
I'm fine with "Internal Server" response show in the browser, but I don't want it to be printed as part of my coherence logs.
For example, when I hit the REST url for key that don't exist in the cache, I get below exception in coherence logs.
How can I get rid off it (or) suppress the exception logs.
Thanks for your time.
(Wrapped) java.io.IOException: unknown user type: com.tangosol.coherence.rest.internal.Get
     at com.tangosol.util.Base.ensureRuntimeException(Base.java:288)
     at com.tangosol.util.Base.ensureRuntimeException(Base.java:269)
     at com.tangosol.coherence.component.util.daemon.queueProcessor.packetProcessor.PacketPublisher.packetizeMessage(PacketPublisher.CDB:23)
     at com.tangosol.coherence.component.util.daemon.queueProcessor.packetProcessor.PacketPublisher$InQueue.add(PacketPublisher.CDB:11)
     at com.tangosol.coherence.component.util.daemon.queueProcessor.service.Grid.dispatchMessage(Grid.CDB:62)
     at com.tangosol.coherence.component.util.daemon.queueProcessor.service.Grid.post(Grid.CDB:31)
     at com.tangosol.coherence.component.util.daemon.queueProcessor.service.Grid.send(Grid.CDB:1)
     at com.tangosol.coherence.component.util.daemon.queueProcessor.service.Grid.poll(Grid.CDB:13)
     at com.tangosol.coherence.component.util.daemon.queueProcessor.service.Grid.poll(Grid.CDB:11)
     at com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.partitionedService.PartitionedCache$BinaryMap.invoke(PartitionedCache.CDB:30)
     at com.tangosol.util.ConverterCollections$ConverterInvocableMap.invoke(ConverterCollections.java:2282)
     at com.tangosol.util.ConverterCollections$ConverterNamedCache.invoke(ConverterCollections.java:2748)
     at com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.partitionedService.PartitionedCache$ViewMap.invoke(PartitionedCache.CDB:11)
     at com.tangosol.coherence.component.util.SafeNamedCache.invoke(SafeNamedCache.CDB:1)
     at com.tangosol.coherence.rest.EntryResource.getValue(EntryResource.java:241)
     at com.tangosol.coherence.rest.EntryResource.get(EntryResource.java:85)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:57)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
     at java.lang.reflect.Method.invoke(Method.java:616)
     at com.sun.jersey.spi.container.JavaMethodInvokerFactory$1.invoke(JavaMethodInvokerFactory.java:60)
     at com.sun.jersey.server.impl.model.method.dispatch.AbstractResourceMethodDispatchProvider$ResponseOutInvoker._dispatch(AbstractResourceMethodDispatchProvider.java:205)
     at com.sun.jersey.server.impl.model.method.dispatch.ResourceJavaMethodDispatcher.dispatch(ResourceJavaMethodDispatcher.java:75)
     at com.sun.jersey.server.impl.uri.rules.HttpMethodRule.accept(HttpMethodRule.java:288)
     at com.sun.jersey.server.impl.uri.rules.SubLocatorRule.accept(SubLocatorRule.java:134)
     at com.sun.jersey.server.impl.uri.rules.RightHandPathRule.accept(RightHandPathRule.java:147)
     at com.sun.jersey.server.impl.uri.rules.SubLocatorRule.accept(SubLocatorRule.java:134)
     at com.sun.jersey.server.impl.uri.rules.RightHandPathRule.accept(RightHandPathRule.java:147)
     at com.sun.jersey.server.impl.uri.rules.ResourceClassRule.accept(ResourceClassRule.java:108)
     at com.sun.jersey.server.impl.uri.rules.RightHandPathRule.accept(RightHandPathRule.java:147)
     at com.sun.jersey.server.impl.uri.rules.RootResourceClassesRule.accept(RootResourceClassesRule.java:84)
     at com.sun.jersey.server.impl.application.WebApplicationImpl._handleRequest(WebApplicationImpl.java:1469)
     at com.sun.jersey.server.impl.application.WebApplicationImpl._handleRequest(WebApplicationImpl.java:1400)
     at com.sun.jersey.server.impl.application.WebApplicationImpl.handleRequest(WebApplicationImpl.java:1349)
     at com.sun.jersey.server.impl.application.WebApplicationImpl.handleRequest(WebApplicationImpl.java:1339)
     at com.sun.jersey.server.impl.container.httpserver.HttpHandlerContainer.handle(HttpHandlerContainer.java:191)
     at com.sun.net.httpserver.Filter$Chain.doFilter(Filter.java:83)
     at sun.net.httpserver.AuthFilter.doFilter(AuthFilter.java:83)
     at com.sun.net.httpserver.Filter$Chain.doFilter(Filter.java:86)
     at sun.net.httpserver.ServerImpl$Exchange$LinkHandler.handle(ServerImpl.java:589)
     at com.sun.net.httpserver.Filter$Chain.doFilter(Filter.java:83)
     at sun.net.httpserver.ServerImpl$Exchange.run(ServerImpl.java:561)
     at java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1110)
     at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:603)
     at java.lang.Thread.run(Thread.java:679)
Caused by: java.io.IOException: unknown user type: com.tangosol.coherence.rest.internal.Get
     at com.tangosol.io.pof.ConfigurablePofContext.serialize(ConfigurablePofContext.java:351)
     at com.tangosol.coherence.component.util.daemon.queueProcessor.Service.writeObject(Service.CDB:1)
     at com.tangosol.coherence.component.net.Message.writeObject(Message.CDB:1)
     at com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.partitionedService.PartitionedCache$InvokeRequest.write(PartitionedCache.CDB:7)
     at com.tangosol.coherence.component.util.daemon.queueProcessor.service.Grid.serializeMessage(Grid.CDB:14)
     at com.tangosol.coherence.component.util.daemon.queueProcessor.packetProcessor.PacketPublisher.packetizeMessage(PacketPublisher.CDB:17)
     ... 42 more
Caused by: java.lang.IllegalArgumentException: unknown user type: com.tangosol.coherence.rest.internal.Get
     at com.tangosol.io.pof.ConfigurablePofContext.getUserTypeIdentifier(ConfigurablePofContext.java:430)
     at com.tangosol.io.pof.ConfigurablePofContext.getUserTypeIdentifier(ConfigurablePofContext.java:419)
     at com.tangosol.io.pof.PofBufferWriter.writeUserType(PofBufferWriter.java:1671)
     at com.tangosol.io.pof.PofBufferWriter.writeObject(PofBufferWriter.java:1623)
     at com.tangosol.io.pof.ConfigurablePofContext.serialize(ConfigurablePofContext.java:345)
     ... 47 more

Hi,
I included coherence-rest-pof-config.xml as part of my pof-config as shown below.
<pof-config xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns="http://xmlns.oracle.com/coherence/coherence-pof-config"
xsi:schemaLocation="http://xmlns.oracle.com/coherence/coherence-pof-config coherence-pof-config.xsd">
<user-type-list>
<include>coherence-pof-config.xml</include>
<include>coherence-rest-pof-config.xml</include>
<user-type>
<type-id>1001</type-id>
I also checked my coherence-rest.jar files for the configuration and the clasess, and all of them exist.
I started my coherence by passing the classpath as below:
$JAVAEXEC -server -Xms6g -Xmx6g -XX:+UseParNewGC -XX:MaxGCPauseMillis=50 -XX:+UseConcMarkSweepGC -XX:+CMSIncrementalMode -XX:CMSInitiatingOccupancyFraction=25 -XX:MinHeapFreeRatio=40 -XX:MaxHeapFreeRatio=70 -Duser.timezone=GMT -Djava.rmi.server.hostname=xx.xx.xx.xx -Dcom.sun.management.jmxremote -Dcom.sun.management.jmxremote.port=13366 -Dcom.sun.management.jmxremote.authenticate=false -Dcom.sun.management.jmxremote.ssl=false -Dtangosol.coherence.log.level=3 -Dtangosol.coherence.log=log4j -showversion $JAVA_OPTS -cp $COHERENCE_HOME/config/:$COHERENCE_HOME/lib/coherence.jar:$COHERENCE_HOME/lib/guidecacheclient.jar:$COHERENCE_HOME/lib/jersey-server-1.8.jar:$COHERENCE_HOME/lib/jersey-core-1.8.jar:$COHERENCE_HOME/lib/jersey-json-1.8.jar:$COHERENCE_HOME/lib/jackson-all-1.8.1.jar:$COHERENCE_HOME/lib/coherence-rest.jar:$COHERENCE_HOME/lib/log4j-1.2.16.jar -Dtangosol.coherence.management=all -Dtangosol.coherence.management.remote=true -Dtangosol.coherence.localhost=xx.xx.xx.xx -Dtangosol.coherence.mode=eval com.tangosol.net.DefaultCacheServer $1
While starting, I'm getting configuration missing exception as shown below. What am I still missing.
Exception in thread "main" (Wrapped) (Wrapped: error creating class "com.tangosol.io.pof.ConfigurablePofContext") java.lang.IllegalStateException: Missing PofSerializer configuration (Config=pgs-pof-config.xml, Type-Id=801, Class-Name=com.tangosol.coherence.rest.internal.Get)
     at com.tangosol.coherence.component.util.Daemon.start(Daemon.CDB:52)
     at com.tangosol.coherence.component.util.daemon.queueProcessor.Service.start(Service.CDB:7)
     at com.tangosol.coherence.component.util.daemon.queueProcessor.service.Grid.start(Grid.CDB:6)
     at com.tangosol.coherence.component.util.SafeService.startService(SafeService.CDB:39)
     at com.tangosol.coherence.component.util.safeService.SafeCacheService.startService(SafeCacheService.CDB:5)
     at com.tangosol.coherence.component.util.SafeService.ensureRunningService(SafeService.CDB:27)
     at com.tangosol.coherence.component.util.SafeService.start(SafeService.CDB:14)
     at com.tangosol.net.DefaultConfigurableCacheFactory.ensureServiceInternal(DefaultConfigurableCacheFactory.java:1105)
     at com.tangosol.net.DefaultConfigurableCacheFactory.ensureService(DefaultConfigurableCacheFactory.java:937)
     at com.tangosol.net.DefaultCacheServer.startServices(DefaultCacheServer.java:81)
     at com.tangosol.net.DefaultCacheServer.intialStartServices(DefaultCacheServer.java:250)
     at com.tangosol.net.DefaultCacheServer.startAndMonitor(DefaultCacheServer.java:55)
     at com.tangosol.net.DefaultCacheServer.main(DefaultCacheServer.java:197)
Caused by: (Wrapped: error creating class "com.tangosol.io.pof.ConfigurablePofContext") java.lang.IllegalStateException: Missing PofSerializer configuration (Config=pgs-pof-config.xml, Type-Id=801, Class-Name=com.tangosol.coherence.rest.internal.Get)
     at com.tangosol.io.ConfigurableSerializerFactory.createSerializer(ConfigurableSerializerFactory.java:46)
     at com.tangosol.coherence.component.util.daemon.queueProcessor.Service.instantiateSerializer(Service.CDB:1)
     at com.tangosol.coherence.component.util.daemon.queueProcessor.Service.ensureSerializer(Service.CDB:32)
     at com.tangosol.coherence.component.util.daemon.queueProcessor.Service.ensureSerializer(Service.CDB:4)
     at com.tangosol.coherence.component.util.daemon.queueProcessor.service.Grid.onEnter(Grid.CDB:25)
     at com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.PartitionedService.onEnter(PartitionedService.CDB:19)
     at com.tangosol.coherence.component.util.Daemon.run(Daemon.CDB:14)
     at java.lang.Thread.run(Thread.java:679)
Caused by: java.lang.IllegalStateException: Missing PofSerializer configuration (Config=pgs-pof-config.xml, Type-Id=801, Class-Name=com.tangosol.coherence.rest.internal.Get)
     at com.tangosol.io.pof.ConfigurablePofContext.report(ConfigurablePofContext.java:1283)
     at com.tangosol.io.pof.ConfigurablePofContext.createPofConfig(ConfigurablePofContext.java:1013)
     at com.tangosol.io.pof.ConfigurablePofContext.initialize(ConfigurablePofContext.java:797)
     at com.tangosol.io.pof.ConfigurablePofContext.setContextClassLoader(ConfigurablePofContext.java:322)
     at com.tangosol.io.ConfigurableSerializerFactory.createSerializer(ConfigurableSerializerFactory.java:42)
     ... 7 more
Thanks for your help.

ACS Unknown User Discovery

Similar Messages

Maybe you are looking for