ACS v3.3 Can't start CSAdmin Failed to Initialise working directories/files

Hello,
All of a sudden my old ACS won't start. Get
Event Type:    Error
Event Source:    CiscoAAA
Event Category:    None
Event ID:    1
Date:        10/12/2012
Time:        8:33:30 AM
User:        N/A
Computer:    COH-ACS
Description:
CSAdmin could not be started: Failed to initialise working directories/files.
Check that the Log directory exists under CSAdmin. (service specific error 26)
Same for CSAuth
Then CSRadius gets could not initialize the Password Aging module
and CSTacacs cound not be started, failed to initialize service diagnostic log
Any ideas???
Thanks
Gene

Forget it. Figured it out. The account associated with ACS needs access do the directories. I gave it local admin access to the box and all is well. Have no idea how it changed, but I have a suspision that our system admin tightened up security and took the AD account associated with ACS and stripped its permisstions away, so I just gave it local admin access to the box.
This worked
Thanks Gene......Oh your very welcome!!! :-)))))

Similar Messages

Error When Starting VM Failed to create memory contents file

Hi,
I"m experiencing issue with a VM that has previsoulsy been snapshotted. The snap shots have been since deleted via the Hyper V Manager. The snap shots were not applied to the VM. Also no .avhd files have been deleted via Windows Explorer
When I start the VM I get the following error message.
[Window Title]
Hyper-V Manager
[Main Instruction]
An error occurred while attempting to change the state of virtual machine MyVirtualMachine.
[Content]
'MyVirtualMachine' failed to initialize.
Failed to create memory contents file 'D:\Virtual Machines\MyVirtualMachine\MyVirtualMachine\MyVirtualMachine\Virtual Machines\25AB3A86-2950-457A-8D54-9B313E2D575E\25AB3A86-2950-457A-8D54-9B313E2D575E.bin' of size 4096 MB.
[Expanded Information]
'MyVirtualMachine' failed to initialize. (Virtual machine 25AB3A86-2950-457A-8D54-9B313E2D575E)
'MyVirtualMachine' failed to create memory contents file 'D:\Virtual Machines\MyVirtualMachine\MyVirtualMachine\MyVirtualMachine\Virtual Machines\25AB3A86-2950-457A-8D54-9B313E2D575E\25AB3A86-2950-457A-8D54-9B313E2D575E.bin' of size 4096 MB. (Virtual machine
25AB3A86-2950-457A-8D54-9B313E2D575E)
[V] See details [Close]
Suggestions Welcomed,
Thanks Adam

Hi,
Please check whether you receive these error logs: Event ID 3130, 3131, 3320 or 3321.
Check the environment in which the start virtual machine operation was being attempted, including:
access and permissions to the configuration file, memory file and all image files
prior error messages in the event log
available RAM on the system
configuration settings
disk space for the memory file and any expanding virtual hard disks
Once the necessary issues have been rectified, try to start the virtual machine again.
If the problem continues, restart the VMMS Service.
To restart the VMMS service using the command prompt:
1. On the computer that has the stopped service, open a command prompt as local administrator and type the following:
net stop nvpswmi
If the service is not running, you will see the error "The Hyper-V Networking Management service is not started."
3. On the command prompt type the following command to start the nvpswmi service
net start nvspwmi
If the service start starts you will see the message "The Hyper-V Networking Management service was start successfully."
To restart VMMS using PowerShell:
1. On the computer that has the stopped service, open a command prompt as local administrator and type the following:
C:\PS>restart-service vmms
For more information please refer to following MS articles:
Event ID 3130 — Virtual Machine Start Operation
http://technet.microsoft.com/en-us/library/dd582385(v=ws.10).aspx
Event ID 3131 — Virtual Machine Start Operation
http://technet.microsoft.com/en-us/library/dd582367(v=ws.10).aspx
Event ID 3320 — Virtual Machine Start Operation
http://technet.microsoft.com/en-us/library/dd582317(v=ws.10).aspx
Event ID 3321 — Virtual Machine Start Operation
http://technet.microsoft.com/en-us/library/dd581892(v=ws.10).aspx
Hope this helps!
TechNet Subscriber Support
If you are
TechNet Subscription user and have any feedback on our support quality, please send your feedback
here.
Lawrence
TechNet Community Support

Can't start Photoshop - 'Could not open a scratch file'

Hi, I recently installed Photoshop CS5, however every time I open the application, I am receiving this error message at the loading screen:
"Could not open a scratch file because the file is locked or you do not have the necessary access privileges. Use the ‘Get Info’ command in the Finder to unlock the file or change permissions on the file or enclosing folders."
I've looked online for solutions everywhere, but I've obviously been unsuccessful and I'm at the point where I have no idea what else to try, other than a clean install of my OS, however that is a last resort as I currently do not have an external hard drive to transfer my files to do so. So far I have tried these things:
Reinstalled Photoshop many times, even the CS6 BETA is giving me the same error.
Deleted preference files within /Library/Preferences/
Used the cmd+alt shortcut when starting Photoshop to select a different scratch disk location.
Used the cmd+alt+shift shortcut to delete the settings file, which I cannot do as the error message mentioned above appears before the window for deleting the settings file does.
Tried rebooting several times, even into safemode and I still get the same message.
Tried changing the permissions on the Applications folder, Adobe folder, CS5 folder and CS5 application, however they are all set to 'read & write access' for me. I am also set as an administrator.
Cleaned my cache of any unneccessary files.
I have also repaired my permissions using Disk Utility, but that didn't solve the problem.
I have a 2010 Macbook Pro, 4GB RAM running OS X Lion 10.7.3 with 2 patitions on my harddrive (OS X and Windows 7). I have 15GB free on my OS X partition currently, which may not seem like much, however I have run Photoshop CS5 previously as a trial and other versions of Photoshop and the small amount of harddrive space has never affected the software's ability to create a scratch file.
The strange thing, however, is that I can use Photoshop CS5 & CS6 on a guest account that I created recently, which means that the problem I am having is permissions based. Logging into a seperate account is a good enough solution for now, but it is incredibly tedious to keep changing accounts just to use Photoshop.
Has anyone got any other ideas? As I mentioned previously, reinstalling is a last resort as I currently don't have the neccessary resources.
Thanks.

I managed to fix this myself, almost by accident, after failing every method suggested that I came across.
My problem was due to 'read only' access being set to some folders in ~/private/ on my main account, meaning that Photoshop could not create an important, temporary scratch file in this location.
To anyone else who comes across this thread due to having the same problem, here's the solution:
Open finder, then go to 'Go' in the menu bar and select 'Go to folder'
In the window that opens, enter '/private/' and click 'Go'
Then, right click on the folder 'tmp' within /private/ and select 'Get info'
In here, scroll to the permissions section and change the relevent user permissions to 'read and write'
Before closing this window, click on the gear icon underneath the list of users and select 'Apply to enclosed items' and hit 'Ok' in the next window.
Finally, repeat steps 3 - 5 for the folder named 'var', also within /private/ and you're done. Photoshop should now open as intended!
Although this solution was ideal for my home laptop, giving 'read and write' access to important folders like these can probably lead to lowered security so please do it at your own risk.

Listener can not started.

Hi,
Could you please let me know how can i start Oracle10 Listener?
There was a file ./opt/oracle/product/10.2.0/network/log/orcl10g.log
But it size was 1 GB. I tried to delete. But could not do. So, I killed that process. who was locking this file.
Now, i'm getting this error please help.
TNSLSNR for Linux: Version 10.2.0.1.0 - Production
NL-00280: error creating log stream /opt/oracle/product/10.2.0/network/log/orcl10g.log
NL-00278: cannot open log file
SNL-00016: snlfohd: error opening file
Linux Error: 13: Permission denied
Listener failed to start. See the error message(s) above...
Thx.
Sara

user2506283 wrote:
Hi Sybrand Bakker,
Listener has been started. But users are getting following errors.Uh, you forgot to give the error the users are getting, but I can pretty well guess it is ora-12514.
See my post on this error at http://edstevensdba.wordpress.com/2011/03/19/ora-12514/
It is by far the most read post on my blog.
I checked Listener status and found below lines.
LSNRCTL> status
Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for Linux: Version 10.2.0.1.0 - Production
Start Date 01-OCT-2011 00:33:59
Uptime 0 days 7 hr. 46 min. 57 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /opt/oracle/product/10.2.0/network/admin/listener.ora
Listener Log File /opt/oracle/product/10.2.0/network/log/listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=linux-BIMSTR)(PORT=1521)))
The listener supports no services
The command completed successfully
I copied & paste here the same lines (No change at any place).
I hope it gives you, Listener's configuration idea.
Do you have any idea about these services? How can i start these services? And why in first line (Host=)?
Thx.

Can't start VC application in Portal 7.3 tc~wd4vc~launcher error

Hello,
we are trying out visual composer 7.30 with Portal. After developing in VC and deploying to portal I can't start the application. In the log-files there is the following message:
Application sap.com/tr-gruppe_impl cannot be started. Reason: it has hard reference to application sap.com/tcwd4vclauncher, which is not active on the server because application is not deployed. Probably refering application sap.com/tr-gruppe_impl declares runtime but no deploy-time dependency to the referred application which is wrong. Deploy the component sap.com/tcwd4vclauncher or contact owners of application sap.com/tr-gruppe_impl to check their references..
I have read several threads that tcwd4vclauncher doesn't exist in portal 7.30, but these threads don't offer or describe a solution which fits my problem.
Do I have to deploy the missing component? If, yes where can I get it?
Please, does anybody have met the same problem and solved it?
Thanks in advance,
Kind regards,
Lu

Hi Lu,
Please make sure the WDEXTENSIONS.sca, BI-WDEXT.sca files are deployed on your system.
Regards,
Natty

Can't start film in Elements organizer after upgrade to 12.1

Hello
Upgraded from Elements (Photoshop and Premiere) ver 12 to ver 12.1.
After that I can't start a film (from my Sony RX100), file extension MTS. Worked Before in ver 12.
Says there is a codec missing. There is also a link in the error message, pointing to apple to install Quicktime.
So I installed the new Quicktime. No change
Googled on the error, result install Microsofts new codec pack. Did so. No change
If i start the file from Explorer (with MS Media player och double click) it works fine.
If i start the film from Quicktime it works fine. If I open/edit the file/film in Premiere and then start it, it works fine.
Best regards
Johnny, Sweden

I forgot. Runnning Win7/64

Can't start Configuration Manager in UCCE 9.02

I can't start the Configuration Manager. The attach file is the error that shown during I started the Configuration Manager. But Script Editor Tool is working fine. I've checked all connectivity and DNS is work fine.
OS: MS 2008 STD. R2 SP1
SQL: MS SQL 2008 ENT. R2 SP1
UCCE: UCCE version 9.02
Deployment model: ROGGER A + B and AWHDSDDS A + B
All Server sync to NTP Server

I encountered the phenomenon which resembled this by UCCE8.5.
The problem was in DB.
What bad data was interfering with was a reason.
It turns out that the log of UpdateAW is seen.

How can i start the apple device service?

i've resently connected my ipods hard drive in the computer and it works well but when i start up my itunes it always says *this iPod cannot be used because the apple device service is not started* but i don't know how to start it and in the meen time i can't sync my ipod.. so my question is how can i start it?
my ipod works fine but i can't download anything..

Type "apple mobile devie service" into the search bar at the top of this page by Support and read the resulting help article.

Kernel[0]: 0 0 AppleUSBCDC: start - initDevice failed

My isight camera keeps failing and when look in the console app the following comes up when it failed.
"kernel[0]: 0 0 AppleUSBCDC: start - initDevice failed". Isight works for a few second whenever I restart the computer.
I checked system information and under USB high speed bus(where it would usually say isight) it says DFU LOADER
already reset everything that needs to be reset and already install a fresh copy of lion.

Hi Harold,
I knew the trick about trashing (agin) the prefs, I didn't tried!
I thought that the problem was "below"...
I'll try tonight.
Thanks,
Christophe.

I was told to update iTunes. The update failed. Now I can't open iTunes but get the following messages: The program can't start because MSVCR80.dll is missing from your computer. Try reinstating the program to fix this problem. Then I get iTunes was not

I was told to update iTunes. I did and it failed. Then every time I tried to open iTunes I get the following message: "The program can't start because MSVCR80.dll is missing from your computer. Try reinstalling the program to fix this problem." Then I get the following: "iTunes was not installed correctly. Please reinstall iTunes. Error 7 (windows error 126)." I have uninstalled and installed iTunes a couple of times with no luck. I cannot even access iTunes support

Troubleshooting issues with iTunes for Windows updates - MSVCR80

Hi. I have a MacBook Pro with OS10.6.8 and cannot get net pages to load on my network at home. I can connect to the internet in work and on other networks. However, some other networks are now starting to fail. Can anyone suggets how I can fix it??

Hi. I have a MacBook Pro with OS10.6.8 and cannot get internet pages to load on my WiFi network at home. My iMac, iPhone and iPad all work on this network. It is connected to the net as dropbox registers a connection and so does skype. I can connect to the WiFi in work and on other networks when travelling. However, some other networks are now starting to fail. Can anyone suggets how I can fix it, as the MBP appears to be fine, its updated with all the latest versions of software and the WiFi network is also fine....just not with my MBP??

Hi. I have a MacBook Pro with OS10.6.8 and cannot get internet pages to load on my WiFi network at home. My iMac, iPhone and iPad all work on this network. It is connected to the net as dropbox registers a connection and so does skype. I can connect to the WiFi in work and on other networks when travelling. However, some other networks are now starting to fail. Can anyone suggets how I can fix it, as the MBP appears to be fine, its updated with all the latest versions of software and the WiFi network is also fine....just not with my MBP??

After an iTunes update failed to install iTunes won't open and I get lthe folloowing error messages. Program can't start because MSVCR80.dll is missing, and iTunes not installed correctly. please reinstall iTunes. Error 7( windows errpr 126)

After an iTunes update failed to install, iTunes won't open and I get the following two windows. Program can't start because MSVCR80.dll is missing from your computer, and iTunes not installed correctly. Please reinstall iTunes. Error 7 (windows error 126) When I reinstall I get the same messages and ITunes won't open.

Click here and follow the instructions.
(98815)

Trying to use a new, larger external hard drive for my Time Machine backup. However, every time I start the backup, it gets started then fails. And, I can't delete the few files that did save on the external. Sort of a catch 22. Any ideas?

Trying to use a new, larger external hard drive for my Time Machine backup. However, every time I start the backup, it gets started then fails. And, I can't delete the few files that did save on the external. Sort of a catch 22. Any ideas?

Is it a USB hard drive? USB hard drives have the problem of not giving full speed if they are hooked up on the same bus as keyboards and mice. Double check your profiler to make sure that is not a problem. If it is Firewire, make sure there aren't other firewire devices in use at the same time. I recommend not only keeping a Time Machine backup, but also a clone, and if you do use Time Machine, to make sure the Time Machine drive or partition is at least twice the size of the original drive.

I bought in december of 2008 a 2.4ghz macbook pro and I think the gpu is starting to fail. Can I still be covered for a change because of the faulty nvidia gpu?

I bought in december of 2008 a 2.4ghz macbook pro and I think the gpu is starting to fail. Can I still be covered for a change because of the faulty nvidia gpu?

If your computer qualifies - MacBook Pro: Distorted video or no video issues
If it does, call Apple Customer Relations or print out a copy of the article and bring it in to the repair shop.

I ran an iTunes update. It failed with the message System Error. The program can't start because MSVCR80.DLL is missing from your computer. Try reinstalling the program to fix this problem. I tried reinstalling but get the same message.

I ran an iTunes update. It failed with the message "System Error. The program can't start because MSVCR80.DLL is missing from your computer. Try reinstalling the program to fix this problem." I tried reinstalling but get the same message. I looked in my Recycle Bin for that file name but there is none there. Is this a new file that iTunes wants?

Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(99683)

ACS v3.3 Can't start CSAdmin Failed to Initialise working directories/files

Similar Messages

Maybe you are looking for