ACS v3.3 Error after entering data
We tried to configure the ACS v3.3 server but there is an ERROR happening on the server webpage while we feed in data. After feeding the data the ACS server's webpage cannot be accessed anymore.
ATTACHMENT:
I am attaching a snapshot of the Error. You can see the Error at the bottom of the page within the web-browser's status Bar.
This error comes as soon as you click on CONFIRM PASSWORD textbox (as shown in attached snapshot).
This looks like a java issue.
Do you have a JVM
1) installed, and
2) enabled
If you install the Sun JVM with mozilla or firefox there is a java debug window which is very useful for finding errors.
However, v3.x has been around for ages and the web pages pretty much had any issues ironed out ages ago
Darran
Similar Messages
-
Program terminated error after entering sold to party no. in sales order
hello friends,
can any help me, i was doing the topic of user exit for pre-defined sold to party using v45a0002 in cmod and i wrote a program for include 'if sy-uname= 'sapuser'.
message e000(0) with ' you are not authorised to create so'
endif
while activating i got error msg 'The last statement is not complete (period missing)." & i have saved inspite error
after i tried create a order
program terminated error after entering sold to party no. in sales order
so i have deactivated the project created in cmod & deleted the project inspite i am getting the program terminated error
i am sending total error plz reply quickly urgent friends
Runtime Errors SYNTAX_ERROR
Date and Time 19.04.2008 17:51:58
ShrtText
Syntax error in program "SAPLXVVA ".
What happened?
Error in ABAP application program.
The current ABAP program "SAPLVKMP" had to be terminated because one of the
statements could not be executed.
This is probably due to an error in the ABAP program.
In program "SAPLXVVA ", the following syntax error occurred
in the Include "ZXVVAU04 " in line 5:
"The last statement is not complete (period missing)."
Author and last person to change the Include are:
Author "SAPUSER "
Last changed by "SAPUSER "
What can you do?
Please eliminate the error by performing a syntax check
(or an extended program check) on the program "SAPLXVVA ".
You can also perform the syntax check from the ABAP/4 Editor.
If the problem persists, proceed as follows:
Print out the error message (using the "Print" function)
and make a note of the actions and input that caused the
error.
To resolve the problem, contact your SAP system administrator.
You can use transaction ST22 (ABAP Dump Analysis) to view and administer
termination messages, especially those beyond their normal deletion
date.
is especially useful if you want to keep a particular message.
Error analysis
In program "SAPLXVVA ", the following syntax error occurred:
"The last statement is not complete (period missing)."
How to correct the error
Probably the only way to eliminate the error is to correct the program.
If you cannot solve the problem yourself and you wish to send
an error message to SAP, include the following documents:
1. A printout of the problem description (short dump)
To obtain this, select in the current display "System->List->
Save->Local File (unconverted)".
2. A suitable printout of the system log
To obtain this, call the system log through transaction SM21.
Limit the time interval to 10 minutes before and 5 minutes
after the short dump. In the display, then select the function
"System->List->Save->Local File (unconverted)".
3. If the programs are your own programs or modified SAP programs,
supply the source code.
To do this, select the Editor function "Further Utilities->
Upload/Download->Download".
4. Details regarding the conditions under which the error occurred
or which actions and input led to the error.
System environment
SAP Release.............. "640"
Application server....... "mtpl7"
Network address.......... "192.100.10.1"
Operating system......... "Windows NT"
Release.................. "5.1"
Hardware type............ "2x Intel 801586"
Character length......... 8 Bits
Pointer length........... 32 Bits
Work process number...... 0
Short dump setting....... "full"
Database server.......... "MTPL7"
Database type............ "ORACLE"
Database name............ "ERP"
Database owner........... "SAPERP"
Character set............ "English_United State"
SAP kernel............... "640"
Created on............... "Nov 4 2004 23:26:03"
Created in............... "NT 5.0 2195 Service Pack 4 x86 MS VC++ 13.10"
Database version......... "OCI_920_SHARE "
Patch level.............. "43"
Patch text............... " "
Supported environment....
Database................. "ORACLE 8.1.7.., ORACLE 9.2.0.."
SAP database version..... "640"
Operating system......... "Windows NT 5.0, Windows NT 5.1, Windows NT 5.2"
Memory usage.............
Roll..................... 8112
EM....................... 8362368
Heap..................... 0
Page..................... 122880
MM Used.................. 4229224
MM Free.................. 995472
SAP Release.............. "640"
User and Transaction
Client.............. 800
User................ "SAPUSER"
Language key........ "E"
Transaction......... "VA01 "
Program............. "SAPLVKMP"
Screen.............. "SAPMV45A 4701"
Screen line......... 16
Information on where terminated
The termination occurred in the ABAP program "SAPLVKMP" in
"SD_DETERMINE_KKBER".
The main program was "SAPMV45A ".
The termination occurred in line 0 of the source code of the (Include)
program " "
of the source code of program " " (when calling the editor 00).
Contents of system fields
Name
Val.
SY-SUBRC
0
SY-INDEX
0
SY-TABIX
1
SY-DBCNT
1
SY-FDPOS
4
SY-LSIND
0
SY-PAGNO
1
SY-LINNO
8
SY-COLNO
1
SY-PFKEY
U
SY-UCOMM
SY-TITLE
Create Standard Order kb: Overview
SY-MSGTY
E
SY-MSGID
VP
SY-MSGNO
106
SY-MSGV1
BUS2032
SY-MSGV2
SY-MSGV3
SY-MSGV4
Active Calls/Events
No. Ty. Program Include Line
Name
13 FUNCTION SAPLVKMP LVKMPU41 91
SD_DETERMINE_KKBER
12 FUNCTION SAPLVKMP LVKMPU41 91
SD_DETERMINE_KKBER
11 FUNCTION SAPLV09B LV09BU30 148
SD_PCHECK_PAYER_IN_CREDITAREA
10 FUNCTION SAPLV09B LV09BU26 296
SD_PARTNER_EXECUTE_CHECKS
9 FUNCTION SAPLV09B LV09BU25 57
SD_PARTNER_CHECK_BEFORE
8 FUNCTION SAPLV09A LV09AU26 342
SD_PARTNER_SINGLE_MODIFY
7 FORM SAPLV09A LV09AF39 176
PARTNER_SELECTION
6 FUNCTION SAPLV09A LV09AU29 820
SD_PARTNER_DETERMINATION
5 FUNCTION SAPLV05E LV05EU01 654
VIEW_KUAGV
4 FORM SAPMV45A MV45AF0K_KUAGV_SELECT 40
KUAGV_SELECT
3 FORM SAPMV45A MV45AF0A_AUFTRAGGEBER_PRUEFEN 46
AUFTRAGGEBER_PRUEFEN
2 FORM SAPMV45A MV45AF0K_KUNDEN_PRUEFEN 454
KUNDEN_PRUEFEN
1 MODULE (PAI) SAPMV45A MV45AI0K_KUNDEN_PRUEFEN 15
KUNDEN_PRUEFEN
Chosen variables
Name
Val.
No. 13 Ty. FUNCTION
Name SD_DETERMINE_KKBER
I_KKBER_KNVV
2222
0000
I_KKBER_T001
8888
3333
8888
I_KKBER_TVTA
2222
0000
I_KUNNR
7000000000
3333333333
7000000000
I_SPART
SM
54
3D
I_VKORG
T000
5333
4000
I_VTWEG
S4
53
34
XVBAK
00000000000000 000000000000000000000000 00000000
2222222222222333333333333332222222222223333333333333333333333332222222223333333322222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
E_KNVV_FLG
2
0
RC
0
0000
0000
XVBKD[]
Table[initial]
XVBPA[]
Table IT_1743[2x542]
FUNCTION=SD_PCHECK_PAYER_IN_CREDITAREADATA=LVT_CREDIT_XVBPA
Table reference: 275
TABH+ 0(20) = 70A2883B388BC43B0000000013010000CF060000
TABH+ 20(20) = 020000001E020000FFFFFFFF04910100D82F0000
TABH+ 40( 8) = 02000000C1248400
store = 0x70A2883B
ext1 = 0x388BC43B
shmId = 0 (0x00000000)
id = 275 (0x13010000)
label = 1743 (0xCF060000)
fill = 2 (0x02000000)
leng = 542 (0x1E020000)
loop = -1 (0xFFFFFFFF)
xtyp = TYPE#000209
occu = 2 (0x02000000)
access = 1 (ItAccessStandard)
idxKind = 0 (ItIndexNone)
uniKind = 2 (ItUniqueNon)
keyKind = 1 (default)
cmpMode = 2 (cmpSingleMcmpR)
occu0 = 1
collHash = 0
groupCntl = 0
rfc = 0
unShareable = 0
mightBeShared = 1
sharedWithShmTab = 0
isShmLockId = 0
gcKind = 0
isUsed = 1
>>>>> Shareable Table Header Data <<<<<
tabi = 0x28C1883B
pghook = 0x00000000
idxPtr = 0x00000000
refCount = 1 (0x01000000)
tstRefCount = 0 (0x00000000)
lineAdmin = 2 (0x02000000)
lineAlloc = 2 (0x02000000)
store_id = 690 (0xB2020000)
shmIsReadOnly = 0 (0x00000000)
>>>>> 1st level extension part <<<<<
regHook = 0x00000000
hsdir = 0x00000000
ext2 = 0x28A4883B
>>>>> 2nd level extension part <<<<<
tabhBack = 0x109C883B
delta_head = 000000000000000000000000000000000000000000000000000000000000000000000000
pb_func = 0x00000000
pb_handle = 0x00000000
I_KKBER
2222
0000
FCODE_KOMM_LIEF_MENGE_SICH
MOD2
44432222222222222222
DF420000000000000000
SYST-REPID
SAPLVKMP
5454544522222222222222222222222222222222
310C6BD000000000000000000000000000000000
%_SPACE
2
0
FCODE_KONFIGURATION1
POKO
54442222222222222222
0FBF0000000000000000
CREDIT_CHECK
2222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000
SY-REPID
SAPLVKMP
5454544522222222222222222222222222222222
310C6BD000000000000000000000000000000000
SAV_BUKRS
SS00
5533
3300
CHAR_
2
0
%_DUMMY$$
2222
0000
AUTOMO_VOLVO
08
33
08
SPACE
2
0
FCODE_ABRUF_GENERIEREN
PABG
54442222222222222222
01270000000000000000
XVBRK
00000000 0000000
2222222222222222222222222222222222222222222222223333333322222222223333333222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
KOPGR_LIEFERPLAN
LL
4422
CC00
FCODE_ZUSAETZE_FAB
PFZU
54552222222222222222
06A50000000000000000
FCODE_REPARATUR
PREP
55452222222222222222
02500000000000000000
XVBKD
000000 #####0000000000 ####
2222222222222333333222222222222222222222222222222222222222222222222200000333333333322222220000
000000000000000000000000000000000000000000000000000000000000000000000000C000000000000000000000
FCODE_GEFAHRGUT
KGGP
44452222222222222222
B7700000000000000000
I_KKBER_HELP
2222
0000
T001
800SS00SRIYA TEXTILES HYDERABAD IN INR EINT 10K41 0000050495DE1
3335533554542545544452222222222245445444422222222222222224424452244452334332222223333333333443
800330032991045849C530000000000089452121400000000000000009E09E20059E4010B410000000000050495451
FCODE_STOFFBERICHTE
IEHS
44452222222222222222
95830000000000000000
T001-BUKRS
SS00
5533
3300
No. 12 Ty. FUNCTION
Name SD_DETERMINE_KKBER
I_KKBER_KNVV
2222
0000
I_KKBER_T001
8888
3333
8888
I_KKBER_TVTA
2222
0000
I_KUNNR
7000000000
3333333333
7000000000
I_SPART
SM
54
3D
I_VKORG
T000
5333
4000
I_VTWEG
S4
53
34
XVBAK
00000000000000 000000000000000000000000 00000000
2222222222222333333333333332222222222223333333333333333333333332222222223333333322222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
E_KNVV_FLG
2
0
RC
0
0000
0000
XVBKD[]
Table[initial]
XVBPA[]
Table IT_1743[2x542]
I_KKBER
2222
0000
XVBKD
000000 #####0000000000 ####
2222222222222333333222222222222222222222222222222222222222222222222200000333333333322222220000
000000000000000000000000000000000000000000000000000000000000000000000000C000000000000000000000
I_KKBER_HELP
2222
0000
No. 11 Ty. FUNCTION
Name SD_PCHECK_PAYER_IN_CREDITAREA
FIC_OBJECTKEY
2222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000
FIC_OBJECTTYPE
BUS2032
4553333222
2532032000
FIF_CHECKTYPE
I
4
9
FIF_MSGTYPE
E
4
5
FIF_NRART
KU
45
B5
FIF_PARGR
TA
5422
4100
FIF_PARNR
7000000000
3333333333
7000000000
FIF_PARVW
RG
5422
2700
FIF_POSNR
000000
333333
000000
FIF_RTYPE
0003
3333
0003
FIS_SDORGDATA
T000S4SMZSOR
533353545545222222
4000343DA3F2000000
FRF_MESSAGES
0
0000
0000
FRF_MESSAGE_COUNT
0
0000
0000
LVF_KKBER2
2222
0000
LVF_KUNNR
7000000000
3333333333
7000000000
SYST-REPID
SAPLV09B
5454533422222222222222222222222222222222
310C609200000000000000000000000000000000
LVF_KURGV2
2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
SY-MSGV4
22222222222222222222222222222222222222222222222222
00000000000000000000000000000000000000000000000000
SY-MSGV2
22222222222222222222222222222222222222222222222222
00000000000000000000000000000000000000000000000000
FIS_SDORGDATA-SPART
SM
54
3D
FIS_SDORGDATA-VKORG
T000
5333
4000
FIS_SDORGDATA-VTWEG
S4
53
34
%_O_SD_PARTNER_CONTEXT-HEX_0004
1
0
LVT_CREDIT_XVBPA
Table IT_1743[2x542]
LVF_KKBER1
2222
0000
GCS_HERTAB
ABCDEFG
24444444
01234567
%_DUMMY$$
2222
0000
SY-SUBRC
0
0000
0000
LVF_BEFORE_PARVW
2222
0000
No. 10 Ty. FUNCTION
Name SD_PARTNER_EXECUTE_CHECKS
FIC_OBJECTKEY
2222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000
FIC_OBJECTTYPE
BUS2032
4553333222
2532032000
FIF_BEFORE
2
0
FIF_CHECKTYPE
I
4
9
FIF_DIALOG
2
0
FIF_MSGTYPE_TO_EXEC
E
4222
5000
FIF_NRART
KU
45
B5
FIF_PARGR
TA
5422
4100
FIF_PARNR
7000000000
3333333333
7000000000
FIF_PARVW
RG
5422
2700
FIF_POSNR
000000
333333
000000
FIF_RTYPE
0003
3333
0003
FIS_SDORGDATA
T000S4SMZSOR
533353545545222222
4000343DA3F2000000
FRF_MESSAGES
0
0000
0000
FRF_MESSAGE_COUNT
0
0000
0000
LVF_ALL_PREDECESSORS_SUCCEEDED
X
5
8
FALSE
2
0
GS_MARKED_PARTNERS
222222222222
000000000000
LVT_CHECKCALLSTACK
Table IT_1515[21x52]
FUNCTION=SD_PARTNER_EXECUTE_CHECKSDATA=LVT_CHECKCALLSTACK
Table reference: 219
TABH+ 0(20) = E8C3863B0000000000000000DB000000EB050000
TABH+ 20(20) = 1500000034000000F00000000491010058090000
TABH+ 40( 8) = 15000000C1248000
store = 0xE8C3863B
ext1 = 0x00000000
shmId = 0 (0x00000000)
id = 219 (0xDB000000)
label = 1515 (0xEB050000)
fill = 21 (0x15000000)
leng = 52 (0x34000000)
loop = 240 (0xF0000000)
xtyp = TYPE#000033
occu = 21 (0x15000000)
access = 1 (ItAccessStandard)
idxKind = 0 (ItIndexNone)
uniKind = 2 (ItUniqueNon)
keyKind = 1 (default)
cmpMode = 2 (cmpSingleMcmpR)
occu0 = 1
collHash = 0
groupCntl = 0
rfc = 0
unShareable = 0
mightBeShared = 0
sharedWithShmTab = 0
isShmLockId = 0
gcKind = 0
isUsed = 1
>>>>> Shareable Table Header Data <<<<<
tabi = 0x90BF863B
pghook = 0x00000000
idxPtr = 0x00000000
refCount = 0 (0x00000000)
tstRefCount = 0 (0x00000000)
lineAdmin = 21 (0x15000000)
lineAlloc = 21 (0x15000000)
store_id = 595 (0x53020000)
shmIsReadOnly = 0 (0x00000000)
>>>>> 1st level extension part <<<<<
regHook = Not allocated
hsdir = Not allocated
ext2 = Not allocated
>>>>> 2nd level extension part <<<<<
tabhBack = Not allocated
delta_head = Not allocated
pb_func = Not allocated
pb_handle = Not allocated
LVS_CHECKCALLSTACK_WA
80000018BUS2030 SD_PCHECK_PAYER_IN_CREDITAREA XX
3333333345533332225455444445545455445454445454422255
80000018253203000034F03853BF01952F9EF325494125100088
GT_MARKED_FOR_DEL_PARTNERS
Table[initial]
LVS_CHECKCALLSTACK_WA-FUNCNAME
SD_PCHECK_PAYER_IN_CREDITAREA
545544444554545544545444545442
34F03853BF01952F9EF32549412510
GC_NO_ACTION
2
0
GC_NEW_PARTNER
I
4
9
GVC_PARTNER_CONTEXT
CONTEXT_X_SD_PARTNER_CONTEXT fò####################################################
44454555555455455445544454552222222222226F0000000000000000000000000000000000000000000000000000
3FE4584F8F34F0124E52F3FE4584000000000000620000000000000000000000000000000000000000000000000000
GC_ERROR
E
4
5
GC_PROCESSMODE_DIALOG
D
4
4
LVF_MSGTYP
E
4
5
BUFFER_FULL_FILLED
F
4
6
POS_NUL
000000
333333
000000
BUFFER_PARTITIAL_FILLED
P
5
0
%_ARCHIVE
2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
GCS_PARTNER_ROLETYPES
0001000200030004000500060007000800090010001100120013NONE
33333333333333333333333333333333333333333333333333334444
0001000200030004000500060007000800090010001100120013EFE5
GCS_PARTNER_TYPE
KUAPLIPE
45454454
B510C905
LVF_RTYPE
0003
3333
0003
GCS_PARTNER_CALL_BACK_EVENTS
CHANGE DELETE NEW
444444222244445422224452222222
381E75000045C5450000E570000000
%_PRINT
000 0 ##
2222333222222222222222222222222222222222222222222222222222222222222222222222222222222222223200
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
GCF_INITIAL_PARTNER
0
32
00
GCF_CALLER_TRANSPORT
T
5
4
TPACHECKRELATION
0000000000
2223333333333
0000000000000
GC_APPL_LOG
SDBFPD
54445422222222222222
34260400000000000000
SY-REPID
SAPLV09B
5454533422222222222222222222222222222222
310C609200000000000000000000000000000000
GVC_PARTNER_CONTEXT-B0007-PARVW
RG
54
27
No. 9 Ty. FUNCTION
Name SD_PARTNER_CHECK_BEFORE
FIC_OBJECTKEY
2222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000
FIC_OBJECTTYPE
BUS2032
4553333222
2532032000
FIF_BEFORE
2
0
FIF_CHECKTYPE
I
4
9
FIF_DIALOG
2
0
FIF_NRART
KU
45
B5
FIF_PARGR
TA
5422
4100
FIF_PARNR
7000000000
3333333333
7000000000
FIF_PARVW
RG
5422
2700
FIF_POSNR
000000
333333
000000
FIF_RTYPE
0003
3333
0003
FIS_SDORGDATA
T000S4SMZSOR
533353545545222222
4000343DA3F2000000
FRF_MESSAGES
0
0000
0000
FRF_MESSAGE_COUNT
0
0000
0000
LS_STATISTICS
########################4 ################
00000000000000000000000032220000000000000000
00000000000000000000000040000000000000000000
No. 8 Ty. FUNCTION
Name SD_PARTNER_SINGLE_MODIFY
FIC_OBJECTKEY
2222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000
FIC_OBJECTTYPE
BUS2032
4553333222
2532032000
FIF_BOKRE
2
0
FIF_CLEAR_APPL_LOG
X
5
8
FIF_DIALOG
2
0
FIF_HARD_DELETION
2
0
FIF_HISTUNR
00
33
00
FIF_HZUOR
00
33
00
FIF_INITIAL_VALUE
X
5
8
FIF_KNREF_PARNR
2222222222
0000000000
FIF_KUNNR_NEW
7000000000
3333333333
7000000000
FIF_KUNNR_OLD
2222222222
0000000000
FIF_LISTPROCESSING
2
0
FIF_MANUAL_ADDRESS
2222222222
0000000000
FIF_MANUAL_ADDRESS_ORIGIN
2
0
FIF_NO_CPD_DIALOG
2
0
FIF_NO_DIALOG
2
0
FIF_NO_MESSAGES
2
0
FIF_PARGR
TA
5422
4100
FIF_PARTIAL_NEW_DETERMINATION
2
0
FIF_PARVW
RG
5422
2700
FIF_POSNR
000000
333333
000000
FIF_PRFRE
2
0
FIF_VKORG
2222
0000
FIS_SDORGDATA
T000S4SMZSOR
533353545545222222
4000343DA3F2000000
FEV_ACTION_DONE
I
4
9
FRF_LOG_COUNT
0
0000
0000
SYST-REPID
SAPLV09A
5454533422222222222222222222222222222222
310C609100000000000000000000000000000000
GVT_LOCAL_CALL_BACK_MEMORY[]
Table[initial]
%_SPACE
2
0
SY-REPID
SAPLV09A
5454533422222222222222222222222222222222
310C609100000000000000000000000000000000
LVF_ACTION_TODO
I
4
9
GC_UPD_PARTNER
U
5
5
%_VIASELSCR
0
4
%_ARCHIVE
2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
GCS_PARTNER_ROLETYPES-SHIP_TO
0002
3333
0002
LVF_NRART
KU
45
B5
LVF_KUNNR_NEW
7000000000
3333333333
7000000000
GCS_ADDRESS_GROUP
SD01CA01
54334433
34013101
GCF_APPL_TABLE_SD
VBUK
5454222222
625B000000
LVF_ROLETYPE
0003
3333
0003
RSJOBINFO
00000000000000 ####
222222222222222222222222222222223333333333333322222222222222222222222222222222220000
000000000000000000000000000000000000000000000000000000000000000000000000000000000000
LVF_MESSAGE_COUNT
0
0000
0000
%_DUMMY$$
2222
0000
GCF_ADDRESS_TYPE_CONT_PERSON
3
3
3
No. 7 Ty. FORM
Name PARTNER_SELECTION
TVTA
000
222222222222222222222222222222222333222222222222222
000000000000000000000000000000000000000000000000000
TPAER
00
22222222222222332222
00000000000000000000
LVS_XVBPA
000000RG7000000000 0000000000000000000000050510
2222222222222333333543333333333222222222233333333333333333333333333332222222222222222222222222
0000000000000000000277000000000000000000000000000000000000000000505100000000000000000000000000
LVF_PARNR
7000000000
3333333333
7000000000
PIC_OBJECTKEY
2222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000
PIC_OBJECTTYPE
BUS2032
4553333222
2532032000
PIF_NO_DIALOG
2
0
PIF_PARGR
TA
5422
4100
LVF_PARVW
RG
5422
2700
PIF_POSNRHi Kartik,
Could you please be more clearer as to how do you want me to proceed so that this syntax error stops bothering me while creating a standard order thru TCode VA01.Also what do you mean by "well comment the code in the include and activate the include"
I created a projet in CMOD and than added the enhancement V45A0002.The components shown as EXIT_SAPMV45A_002(Predefined sold to party when making the standard order),i double click on the exit and entered into the function module.After that i double clicked on the include ZXVVZU04 and entered in and wrote E_KUNNR=100171
While activating i got error msg 'The last statement is not complete (period missing)." & i have saved inspite the error .After that i tried to create a order and program terminated error came after entering sold to party no. in sales order
so now i have deactivated the project which i created in CMOD & deleted the project also inspite of this i am getting the program terminated error while making the order
I would be great ful if somebody helps me *** out of this syntax error.
Thanks
Rishi -
Save and refresh after entering data inoto table.
hello guys,
im using abap webdynpro now. and im facing a problem with the saving and update " refresh function"
I have entry table and some other text input.
the thing im doing is to enter data in the filed, attachment, drop down selection. then the data will be saved into the table in the same page
and need to refresh the page automaticlly when doing this. so the used does not have to do it manully
please help me in this..code, source, or hints.
Thanks
Lilywell , the guys guid me to some ideas.
yes..after entering data into filed, textinput. the data will goes to the table after clicking " save" button. after that I want the table to be updated.
thanks -
Error While entering data in VA01
Hi,
I get the following error while entering data for "Plant" in Sales order creation (VA01). Can anyone please tell me how to solve this problem.
Runtime Errors SAPSQL_INVALID_TABLENAME
Except. CX_SY_DYNAMIC_OSQL_SEMANTICS
Date and Time 27.04.2009 12:57:13
Short dump has not been completely stored (too big)
Short text
A table name, specified in an SQL command, is unknown.
What happened?
Error in the ABAP Application Program
The current ABAP program "SAPLV61Z" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
Error analysis
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_DYNAMIC_OSQL_SEMANTICS', was
not caught in
procedure "SEL_KONDTAB" "(FORM)", nor was it propagated by a RAISING clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
An invalid table name "A996" was specified in an Open SQL command:
Due to one of the following reasons, the error occurs only at runtime:
- the table name was specified dynamically, or
- the SELECT clause, WHERE clause, GROUP-BY clause, HAVING clause, or
ORDER-BY clause was specified dynamically.
Missing RAISING Clause in Interface
Program SAPLV61Z
Include LV61ZU01
Row 260
Module type (FORM)
Module Name SEL_KONDTAB
Trigger Location of Exception
Program SAPLV61Z
Include LV61ZU01
Row 724
Module type (FORM)
Module Name SEL_KONDTAB
Source Code Extract
Line SourceCde
694 and kschl = se_kschl
695 and datbi >= se_date
696 and datab <= se_date
697 and (coding_tab).
698 endif.
699 endif.
700 else.
701 if t681-ksdat is initial.
702 if not <entrytab> is assigned.
703 select * from (t681-kotab) appending table <cond_tab>
704 where kappl = se_kappl
705 and kschl = se_kschl
706 and (coding_tab).
707 else.
708 select * from (t681-kotab) appending table <cond_tab>
709 for all entries in <entrytab>
710 where kappl = se_kappl
711 and kschl = se_kschl
712 and (coding_tab).
713 endif.
714 h_subrc = sy-subrc.
715 if select_split ne 0.
716 modify coding_tab from coding_alter index select_split.
717 select * from (t681-kotab) appending table <cond_tab>
718 where kappl = se_kappl
719 and kschl = se_kschl
720 and (coding_tab).
721 endif.
722 else.
723 if not <entrytab> is assigned.
>>>>> select * from (t681-kotab) appending table <cond_tab>
725 where kappl = se_kappl
726 and kschl = se_kschl
727 and datbi >= se_date
728 and datab <= se_date
729 and (coding_tab).
730 else.
731 select * from (t681-kotab) appending table <cond_tab>
732 for all entries in <entrytab>
733 where kappl = se_kappl
734 and kschl = se_kschl
735 and datbi >= se_date
736 and datab <= se_date
737 and (coding_tab).
738 endif.
739 h_subrc = sy-subrc.
740 if select_split ne 0.
741 modify coding_tab from coding_alter index select_split.
742 select * from (t681-kotab) appending table <cond_tab>
743 where kappl = se_kappl
Thank you in advance....
Regards,
Sriram.An invalid table name "A996" was specified
in an Open SQL command
Find out the transport request pertaining to Table A996 and ensure that both that request and the configuration request pertaining to that table are moved simultaneously.
thanks
G. Lakshmipathi -
How to lock a pdf form after entering data
Hi
I have created certificate with editable fields for a client, I was of the thinking that the certificate is to be filled-in and printed however the client informed me that it is instead emailed to recipients. How can I make it possible for the client to lock the certificate after entering data.
Bear in mind that the client is using Adobe Reader not Acrobat. I have tried setting a security password but Reader does not require the password in order to enable or disable the fields.If the user has Acrobat, not the free Reader, they could flatten the PDF form. If they only have Reader they can make the fields read only. They also might want to use a digital certificate to invisibly sign the PDF. Signing the PDF will add code to disclose if the PDF has been changed since it was signed.
-
On Yahoo Mail...and ONLY Yahoo Mail..I get a 404 error after entering my user name and password. This doesn't happen with IE, just Firefox, and just Yahoo Mail. I tried uninstalling and reinstalling FF; no change. Yahoo was absolutely no help whatsoever; can you solve the mystery? Thanks
HI Emmet,
thanks so much for your posts back. I really appreciate it and yes that does help to know that you could not get it working.
I did have some success, in removing the SSL Authentication checkbox in the smtp server settings - I found that this allowed my friend to be able to send mail from the mail app via his sbcglobal (yahoo) account.
So that did help but of course the messages do not have ssl encryption and I'm not sure how big a deal that is for an individual. He is able to receive mail but unless the SSL authentication box is unchecked, he cannot send.
i hope that helps anyone out there also!
Thanks also for the tip about sparrow - yes I have heard of it and it is very popular, he may end up using that in the end.
Thanks again, much appreciated.
Felix -
Petstore error after entering the store
I deployed the Petstore app without error to RI. After initially installing the tables, I receive the following error after entering the store:
Oops! Your request cannot be completed. The server got the following error.
com.sun.j2ee.blueprints.petstore.control.exceptions.GeneralFailureException
at com.sun.j2ee.blueprints.petstore.control.web.ModelManager.getSCCEJB(ModelManager.java:130)
at com.sun.j2ee.blueprints.petstore.control.web.ShoppingClientControllerWebImpl.(ShoppingClientControllerWebImpl.java:65)
at com.sun.j2ee.blueprints.petstore.control.web.RequestProcessor.processRequest(RequestProcessor.java:75)
at com.sun.j2ee.blueprints.petstore.control.web.MainServlet.doProcess(MainServlet.java:111)
at com.sun.j2ee.blueprints.petstore.control.web.MainServlet.doGet(MainServlet.java:98)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:865)
at org.apache.tomcat.core.ServiceInvocationHandler.method(ServletWrapper.java:626)
at org.apache.tomcat.core.ServletWrapper.handleInvocation(ServletWrapper.java:534)
at org.apache.tomcat.core.ServletWrapper.handleRequest(ServletWrapper.java:378)
at org.apache.tomcat.core.Context.handleRequest(Context.java:644)
at org.apache.tomcat.core.ContextManager.service(ContextManager.java:440)
at org.apache.tomcat.service.http.HttpConnectionHandler.processConnection(HttpConnectionHandler.java:144)
at org.apache.tomcat.service.TcpConnectionThread.run(TcpEndpoint.java:310)
at java.lang.Thread.run(Thread.java:484)
At this point I have no idea where to look. Any thoughts out there?
TIA,
Larry Molter
Digital Fusion, Inc.I solved this by rebuilding the petstore application and deploying the petstore.ear from %JPS_HOME%\src\petstore\build. Even though I got warnings during the deployment, the application seems to run fine.
Oh, well... -
Double character input error when entering data in numbers using Bluetooth keyboard.
Using a bluetooth keyboard (Logitech) sometimes causes a double character input when entering data in numbers.
For example if wish to enter the number "22" or the word "in" they become "2222" and "iinn". Pressing enter of tab also causes a double jump
This problem is not always solved by turning keyboard off and on or by closing down and restarting numbers.
This problem does not occur in any other app.
I have used 2 different Logitech keyboards (ultra-slim and the recently new folio keyboard) and both caused the same problem.
The error is sporadic but frequent and has lead to me often having to switch back to touch input.
Very frustrating considering these excellent keyboards are ideal for using in numbers when working correctly!
ANy advice would be much appreciatedZombie,
Not much help I'm afraid, but I just saw your post & wanted to let you know that I have the same problem, but for me it manifests itself in many apps, and it happens with the Apple bluetooth keyboard
. The only thing I've noticed is that it only seems to happen when I first start typing after not using the keyboard for a while (I'm not sure how long a while is, but maybe 30 seconds or so). Then I'll type & the first few letters will be fine, and then one letter double-types, and then it's fine again until I stop using it for whatever the threshold amount of time is. I'm guessing that it has something to do with the iPad's battery management & that it's shutting off the connection to the keyboard or something & once it picks it back up, then it double-types that letter.
At least in Pages, it isn't as big of a deal because I know it's coming, I can correct it & then type for a long time. In Numbers, my keyboard use is much less consistent, so I need to be more cognisant of it. -
Save and refresh after entering data inoto table ( update)
hello guys,
im using abap webdynpro now. and im facing a problem with the saving and update " refresh function"
I have entry table and some other text input.
the thing im doing is to enter data in the filed, attachment, drop down selection. then the data will be saved into the table in the same page
and need to refresh the page automaticlly when doing this. so the used does not have to do it manully
please help me in this..code, source, or hints.
Thanks
Lilythanks Manas Dua
I could do that, but this is going to be problem with performance side.
I want a method or something to make it easier, faster too
please help me in code or something if that possible.
Regards
Lily -
Error after entering user self registration details
Hello all,
I am getting an 2 errors: after i fill the user self registration and click create. Any advice on how i can resolve this?
some times i get: "Error: Structure : No agent found."
and sometimes i get: "Error: Function call cannot be executed; parameter contains errors"
appreciate your time and help.- will give points
Arpita
Edited by: Arpita Rani on Oct 22, 2008 4:46 AMPls let me kow if you have resolved the issue as am facing the same issue.
rgds,
Manu -
Syntax error after convert data : LSMW
Hi,
I am doing a LSMW for MM01. After the convert data step I get the following syntax error:
The following syntax error was found in program
/1CADMC/SAP_LSMW_COMV_00000168
For typr "C", a max length specification of 65535 is allowed.
Can anybody help me in figuring out where I am going wrong.
Thanks,
Nileshjust execute ur lsmw in this, there is tab button user menu next to execute button , click on that , u come across a pop screen where u have a check box in that just select generate conversion program and display conversion program. and press enter.
afterwards select the radio button generate conversion program , it will shows the program in this do systax check. u will findout the error .
do syntax check by running step generate conversion programe,
and also check source fields step , r u giving correct length or not for each field.
Thanks
null -
SRDemo in tomcat 5.5.x got ERROR after added data bindings
hi all,
it is success to deploy the project into tomcat 5.5.x, and it works fine when no data bindings added into jspx.
after i added a data bindings,
it works find at embed OC4J, but not in tomcat 5.5.x
and tomcat comes this error:
oracle.jbo.JboException: JBO-29000: Unexpected exception caught: oracle.jbo.JboException, msg=JBO-29000: Unexpected exception caught: javax.naming.NameNotFoundException, msg=Name SRPublicFacade is not bound in this Context
how can i bound the SRPublicFacade into tomcat5.5.x ?
Many Thanks!
Best Regards,
S. H. Wong
Edited by: user9218028 on Apr 13, 2012 10:04 PM
Edited by: user9218028 on Apr 13, 2012 10:09 PM
Edited by: user9218028 on Apr 13, 2012 10:13 PM
Edited by: user9218028 on Apr 13, 2012 10:14 PMPlease help,
Many Thanks.
Best Regards
Wong Sai Ho -
Overflow Error After Sending Data
Dear Expert,
I have a problem, After sending the data, I receive error "ExecuteBaseLogic::Error in RunLogicAgainstSelection: Overflow"
Please let me know if somebody have idea to fix the problem.
This the captured screen:
==================================================
Book Name:Production Mill Final v10.xlt
Application : FINANCE
Status : Success
Submitted Count : 1
Accepted Count : 1
Rejected Count : 0
- Error Message -
ExecuteBaseLogic::Error in RunLogicAgainstSelection: Overflow
Thanks,
RuswandiHi Ruswandi,
Do you have a logic that is being called in the Default logic? The Default logic runs every time you send data, try to comment out those logic one by one and then send data again to see which is causing the overflow problem.
Hope this helps,
MVS -
Hello,
After successfully loading data into a cube, if i go to manage, i get the following
message
Diagnosis
There is an inconsistency between the load status of the data and the option of reporting on this data.
There is data in the InfoProvider that is OK from a quality point of view, but is not yet displayed in reporting.
Procedure
Choose Refresh to remove the inconsistency.
If i choose refresh, i can report on the cube. But if i load data again, i get the same error.
Can you pls help?
Regards,
SurajHi Suraj,
This is an message you get when you are in the manage screen at a certain time of the load process.
If you wait a little longer before you go into manage, you will not see it.
Udo -
I have used the PrimeVest web site to keep track of my IRA for several years now. For most of that time I have used Internet Explorer and have had no trouble. I have a link to that site pasted onto an Excel spread sheet and I click on that link daily to get my present balance. I have been doing it this way for years and have had no trouble while using Internet Explorer.
I recently installed the Firefox browser on my new laptop and have switched to using it as my default browser. When I click on that link now and enter my account number and password, sometimes it works OK in Firefox and sometimes it gives me a message saying "Your session has timed out. Please Log In Again." I have tried multiple times to re-enter the account number and password but always get the same message. Closing Firefox and reopening it produces the same result. I have even tried shutting the computer completely down and restarting it, but I got the same result. I can not find any pattern or reason to the days when I can use Firefox and the ones when I can not. The only way I have been able to log on to this site on those days is to past the link into Internet Explorer.
I do the same thing with several other financial sites and have not had any trouble with them and Firefox.Thanks for the response.
I attempted to remove cookies, but I can not identify any of the cookies on the list with the PrimeVest web site. No PrimeVest, no PVs, nothing that looks like it came from them.
I have also reported the problem to PrimeVest and their tech did answer. He suggested erasing the browsing history (temporary internet files), which I did with no effect. He also had me check for the correct starting page address, which was OK. He stated that they are aware of a problem and it is on their list. No indication of how far down that list though. His only cure was to use IE for now, which I was already doing. Perhaps he can tell me which cookies to remove.
Maybe you are looking for
-
Best Practices for File Organization/Project Explorer
So we are finally getting SCC at my organization to manage our LabVIEW development, and that is good! Now, we are starting in on discussions about how we should organize our files on disk and how we should use the Project Explorer. When I started he
-
When I try to open a picture in iphoto a message tells me the file cannot be found. How do I find the file? It does not happen with all the pictures.
-
Firing Exit plug from the embedded component
Hello All, I am working on a scenario where I am developing a Webdynpro component which is child to the MainComponent. MainComponent view has links to access my child component as I have exposed my child component as Public part. Once my application
-
Is there a way to configure screen sharing to mirror?
In past versions of OS X, if you used VNC to screen share, it mirrored the display. Now in 10.7, it displays a logon screen. Is there a way to revert it to the old way??
-
BAPI_CONTRACT_CREATEFROMDATA help needed
Hi all, A program I have created is required to create multiple contracts during a typical run. In our QA system this works perfectly. However, in our production system, it is able to create the first contract but every contract after that gets an ab