ACS5.3 - VMWARE Version - TACACS+ response latency greater than 3 seconds

Need your help to close this error .. is this due to server process delay ?
Cisco Secure ACS - Alarm Notification
Severity: Information
Alarm Name
TAFE ACS - PROCESS STATUS
Cause/Trigger
Alarm caused by TAFE ACS - PROCESS STATUS threshold
Alarm Details
Alarm details are not available
Generated On
2014-09-08 14:14:00.0
Name:
TAFE ACS - PROCESS STATUS
Description:
RADIUS/TACACS+ response latency greater than 3 seconds

Hello,
You can customize the threshold values with help of the following cisco docs:
http://www.cisco.com/en/US/docs/net_mgmt/cisco_secure_access_control_system/5.0/user/guide/monit_report.html#wp1053255
http://www.cisco.com/en/US/docs/net_mgmt/cisco_secure_access_control_system/5.2/user/guide/viewer_monitoring.html#wp1099583

Similar Messages

The version number cannot be greater than current version number

i am deployingmy ssis package which is in 2012.(version 6)
and my ssis server also in 2012.
but i am getting error:
"the version number in package is not valid, the version number cannot be greater than current verison number"
and one more thing how to see ifmy package is in 2012,by looking it in notepad?

Hi coool_sweet,
Based on the error message that "The version number in the package is not valid. The version number cannot be greater than current version number.", we can infer that the underlying cause may be that the current SSIS package is created in SQL Server
2012, while you are trying to open or execute it in SQL Server 2008R2 or earlier versions.
As to your scenario, I guess you are using old version of the DTEXEC instead of the new one to run the package. That means, the exe shipped with 2008R2 or earlier versions is picked up when it is expected to use the one shipped with 2012. So, obviously this
happens when SQL Server 2012 is running along with SQL Serve r2008R2 or earlier versions on the same machine.
To fix this issue, there are three workarounds to correct this.
Hard code the path of SQL Server 2012's DTEXEC while calling the SSIS package as shown below.
C:\Program Files\Microsoft SQL Server\110\DTS\Binn\DTEXEC.exe /F "D:\MyFolder\MyPackage.dtsx"
Rename the old exe in the 2008R2 path to a different name (Example:- C:\Program Files\Microsoft SQL Server\100\DTS\Binn\DTEXEC_Old.exe)
Go to PATH environmental variable and edit it in such a way that "C:\Program Files\Microsoft SQL Server\110\DTS\Binn" path appears well before the "C:\Program Files\Microsoft SQL Server\100\DTS\Binn" path.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Error - The version number in the package is not valid. The version number cannot be greater than current version number

whats does this error mean
i download 2008 r2 and try to open package but still getting error
Error 1
Error loading The version number in the package is not valid. The version number cannot be greater than current version number.
Error 2
Error loading Package migration from version 8 to version 3 failed with error 0xC001700A "The version number in the package is not valid. The version number cannot be greater than current version number.".

can you tell me which version it is >
i try to fix in dtexec
getting following error :
Started: 2:02:13 PM
Error: 2015-01-30 14:02:14.68
Code: 0xC000F427
Source: Member Eligibility
Description: To run a SSIS package outside of SQL Server Data Tools you must
install Member Eligibility of Integration Services or higher.
End Error
Warning: 2015-01-30 14:02:14.69
Code: 0x80019002
Description: SSIS Warning Code DTS_W_MAXIMUMERRORCOUNTREACHED. The Execution
method succeeded, but the number of errors raised (2) reached the maximum allow
ed (1); resulting in failure. This occurs when the number of errors reaches the
number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the e
rrors.
End Warning
DTExec: The package execution returned DTSER_FAILURE (1).
Started: 2:02:13 PM
Finished: 2:02:14 PM
i cannot upgrade original package

Ken Burns on photos greater than 60 seconds?

I want to have one photo showing for the full 4:45 duration of a song with a slow, smooth, Ken Burns pan from beginning to end. Is there a way to do this? I tried on iMovie HD and iMovie '08 but can not find out how. It looks like to get greater than 60 seconds you have to import the photo 5 times (4 with a 60 sec duration and 1 with a 45 sec duration). How can you then apply a single Ken Burns effect across all 5 photos as if they were one photo? I tried to make a Podcast in GarageBand and there I could make the photo as long as I wanted with the music but there is no Ken Burns effect available there. I saved the podcast and then imported it into iMovie to apply the Ken Burns effect but it is not available to videos in iMovie, which it what the photo turns into after GarageBand saves it. Any help would be appreciated.

Is there a way to group the photos and apply a KBE across the grouping?
No. The KBE tool can currently only be applied to a single image.
If you are willing to trade quality for time in a Ken Burns Effect, you can always create a new iMovie HD project of the appropriate type/aspect ratio, bring in the photo, create the KBE at the length you want, export it to an iMovie '08 compatible compression format, and then import the file to iMovie '08. Just remember that iMovie HD handles photos at a lower resolution than iMovie '08 and the resulting loss in quality will probably be easy to see in comparison with other photos coming directly into iMovie '08.
Karsten,
Those are beautiful effects. My complements! Will have to try doing more work with stills using pre-edits in Photoshop.

The version you requested is greater than the highest version licensed on

I get this error message when starting fresh installed Labview 8.2. Do I need to update the license file on the license server? How do I get this?

I am not sure if that is why you get the error message, but you can check you licence by running the licence manager. It should be under the National Instruments folder in the start menu. Search the tree for labview 8.2 and check to see if it is activated (solid green square LED). If not, you can activate it from the licence manager if you have you serial number handy. It will connect to NI server and request and install the licence. Select the software and hit the activate button at the top (or right click).Message Edited by paulmw on 10-25-2006 07:41 AM

How to filter results of the timedifference where great than a value

To all,
How do I filter the results of this so I only get that which is greater than 2 seconds?
Here is the query:
SELECT
A.REQUEST_UU_ID, TO_CHAR(B.CREATE_BY_TS - A.CREATE_BY_TS) AS ElapsedTime
FROM
TELLER_MESSAGE A INNER JOIN TELLER_MESSAGE B ON B.REQUEST_UU_ID = A.REQUEST_UU_ID
WHERE
A.MESSAGE_TYPE_CD LIKE '%REQ%' AND
B.MESSAGE_TYPE_CD LIKE '%REP%'
ORDER BY A.REQUEST_UU_ID
Here are the results which I want to filter to get only the one row with 3 second time difference.
99ac8695-18fb-a59d-1d6b-3d2a577fff22     +000000000 00:00:03.000000 <<<this is the one I want
99ac8696-18fb-a59d-1d6b-3d2a577fff22     +000000000 00:00:02.000000
99ac8896-18fb-a59d-1d6b-3d2a577fff22     +000000000 00:00:02.000000
I tried it without the TO_CHAR casting but that gave an error.
Thanks,
Eric

Hi, Eric,
Add this to your WHERE clause:
AND     b.create_by_ts > a.create_by_ts + INTERVAL '2' SECONDOr you could add this to the join condition.
I hope this answers your question.
If not, post a little sample data (CREATE TABLE and INSERT statements, relevant columns only) for all tables involved, and also post the results you want from that data.
Always say which version of Oracle you're using (e.g., 11.2.0.2.0).
See the forum FAQ {message:id=9360002}

HT1229 My iPhoto Library (version 8.1.2) is 280GB (greater than 50% of my 500GB total storage memory on my iMac. It was too large for me to drag it to a new hard drive so the Apple geniuses did it for me. However they did not delete the Library from my

My iPhoto Library (version 8.1.2) is 280GB (greater than 50% of my 500GB total storage memory on my iMac. It was too large for me to drag it to a new hard drive so the Apple geniuses did it for me. However they did not delete the Library from my iMac (that's my responsibility). I dragged it to Trash and when it started to move I clicked over to the new hard drive to confirm it had indeed been copied. I became nervous when I didn't see among the few files on this otherwise empty new hard drive anything that resembled a 280GB Library so I cancelled the migration to trash.
How can I be sure that my iphoto has been copied and that all my "metadata" survived in tact?

the new backup drive
I thought the new drive would be your data drive to host the iPhoto library. Do you also use it for TimeMachine backups?
I am unable to search either in email as well as Finder. I AM able to search within iPhoto though, thankfully
Spotlight may still be busy rebuildig its index.
You could try to rebuild the Spotlight Index, if you do see no progress:
Spotlight: How to re-index folders or volumes
I hope, other frequent posters will drop in. I have not used iPhoto 8.x in long time.

Just bought a new iphone 5 i have an old imac computer OSX 10.5.8 and itune version 10 (updated at great cost last year for iphone4) it dosen't let me restore data... any chance of update or do i have to thow away my computer (and never by Mac aga data 0

Just bought a new iphone 5, i have an old imac computer OSX 10.5.8 and itune version 10 (updated at great cost last year for iphone4) it dosen't let me restore data... any chance of update or do i have to thow away my computer (and never by Mac again?)

You an use your iPhone without connecting it to a computer.
But the product description for the iPhone clearly states that in order to sync with a Mac you must have OSX 10.6.8 or later. That version of the OSX is usually called Snow Leopard. There are two mo recent versions of OSX. OSX 10.7.x (Lion) and OSX 10.8.x (Mountain Lion).
If you can upgrade your computer to at least Snow Leopard I suggest you do so.

When trying to install an extension for InDesign CC 2014 I get an error message saying that the extension only works with version 7.0 or greater. My version is 10.0.0.7 x64 Build I was using this extension fine with InDesign CC

When trying to install an extension for InDesign CC 2014 I get an error message saying that the extension only works with version 7.0 or greater. My version is 10.0.0.7 x64 Build I was using this extension fine with InDesign CCError message with InDesign CC 2014

Used the 64bit version before CC 2014 as well so don't think that's the issue. Here is the text in the .mxi file if I have missed something:
<?xml version="1.0" encoding="UTF-8" standalone="no"?>
<macromedia-extension id="PrintUI Tools" name="PrintUI Tools" requires-restart="true" version="3.0.0">
<author name="PrintUI.com"/>
<description/>
<license-agreement/>
<products>
<product maxversion="" name="InDesign" primary="true" version="7.0"/>
</products>
<files>
<file destination="" file-type="CSXS" products="" source="PrintUIManagement.zxp"/>
</files>
<update url="http://printui.com/public/downloads/updates/printui_tools_update.xml"/>
</macromedia-extension>

HT203175 After upgrading to version 11.0.4.4 I get a "Itunes has stopped working" message when I try to start a movie on my PC. I have updated Quick time and previous version of Itunes worked great.

After upgrading to version 11.0.4.4 I get a "Itunes has stopped working" message when I try to start a movie on my PC. I have updated Quick time and previous version of Itunes worked great.

One thing is for sure, and that is if the only page i visit is the Google homepage (not logged in) or this site (mozilla forum), the problem does not occur, ever. I can't make it happen.
If i visit yahoo.com (not logged in) (or ighome.com, logged in), as examples, it happens every time.

I have a manual that contains headings and index entries that contain less than and greater than characters, and . The Publish to Responsive HTML5 function escapes these correctly in the main body of the text but does not work correctly in either the C

I have a manual that contains headings and index entries that contain less than and greater than characters, < and >. The Publish to Responsive HTML5 function escapes these correctly in the main body of the text but does not work correctly in either the Contents or the Index of the generated HTML. In the Contents the words are completely missing and in the index entries the '\' characters that are required in the markers remain in the entry but the leading less than symbol and the first character of the word is deleted; hence what should appear as <dataseries> appears as \ataseries\>. I believe this is a FMv12 bug. Has anyone else experienced this? Is the FM team aware and working on a fix. Any suggestions for a workaround?

The Index issue is more complicated since in order to get the < and > into the index requires the entry itself to be escaped. So, in order to index '<x2settings>' you have to key '\<x2settings\>'. Looking at the generated index entry in the .js file we see '<key name=\"\\2settings\\>\">. This is a bit of a mess and produces an index entry of '\2settings\>'. This ought to be '<key name=\"&lt;x2settings&gt;\" >'. I have tested this fix and it works - but the worst of it is that the first character of the index entry has been stripped out. Consequently I cannot fix this with a few global changes - and I have a lot of index entries of this type. I'm looking forward to a response to this since I cannot publish this document in its current state.

When trying to install an Adobe extention, during the installation process I get a message that says "This extention cannot cannot be installed-----requires version 13.0 or greater." I am installing from within CC

When trying to install an Adobe extention, during the installation process I get this message-----"This extention cannot be installed----requires version 13.0 or greater." I am installing through Photoshop CC------appreciate any help.

Hi Gary. Extensions have to be written for the specific Photoshop versions they are designed to run on.and definitely don't all run on every version of Photoshop. You'd think that you'd be OK with that message, but it might be that it works fine on CS6 (13) but not on CC (14).
But it could be an error.
What is the extension you are trying to install? Is Photoshop, and Extension Manager fully up to date? If you are sure that the extension runs on CC, I'd try un installing, and reinstalling the Extension Manager. I have had to exactly that a while back.

How do I down load iTunes version 11.1 or greater?

How do I down load iTunes version 11.1 or greater on my iPad. Seems like it would be the latest version since I just bought it today

You may be getting this message if you are trying to activate your new iOS device using an older instalation of iTunes on your computer.
iPad Essentials - Setting Up
http://www.apple.com/support/ipad/essentials/
You should not have to download and install iTunes from Apple in order to get the latest version on your Mac. You should be able to choose Software Update from the Apple () menu.
OS X: Updating OS X and Mac App Store apps
http://support.apple.com/kb/HT1338
Alternatively, you can try and access the update from within iTunes itself by selecting teh Check for Updates menu item.
iTunes: How to install the latest version
http://support.apple.com/kb/ht5654
If both of the afore mentioned update methods fail, then another option is to download and install iTunes directly from Apple's download site.
Software downloads: Frequently asked questions
http://support.apple.com/kb/HT2404
Download iTunes
http://support.apple.com/downloads/#itunes
Troubleshooting iTunes installation on Mac OS X
http://support.apple.com/kb/HT2311

Which Vmware Version is supported by SAP HANA ???

Hi SAP HANA Experts,
We knew that now a days SAP HANA is supporting Vmware also to install it...
Can anyone provide which Vmware version is supported by SAP HANA for PRD & NON PRD Setup's

Hi,
SAP HANA Virtualized Central Note https://service.sap.com/sap/support/notes/1788665
SAP HANA Virtualized Overview ppt http://www.saphana.com/docs/DOC-3334
SAP HANA Guidelines for VMware http://www.saphana.com/docs/DOC-4192
VMware Best Practices for SAP HANA http://vmware.com/go/sap-hana
Thanks & Regards,
Kumar

Managing Disk Space on ACS5.2 VMWare

Hi,
is it possible to change the default Disk Space reservation for the Viewer database in ACS5.2 VMWare installation (see Table 3-1 on ACS5.2 cli-reference guide)?

If this area is outside of the Flash Recovery Area, then it is up to you to manage the space. You can set an appropriate retention policy to accommodate your expected recovery/space requirements.

ACS5.3 - VMWARE Version - TACACS+ response latency greater than 3 seconds

Similar Messages

Maybe you are looking for