Action Builder what version?

I have Adobe 9 Pro.  This includes LiveCycle verion 8.2 ES.  But I do not have Action Builder.  Can you advise if Action Builder is an additional feature that has to be purchased and if so how can I go about getting it?

Action builder is a feature of Designer not something that needs to be purchased separately.  If I remember correctly you need Designer version 9 or above.

Similar Messages

  • Action Builder to send 2 emails at once

    I would like  to know if it is possible to send two different email with one click?
    I have one button that email's a summary of what was approved. .Then I have another button that submits a XML file to SharePoint for processing by nintex. I would like to eliminate one step if possible by combining two actions into one button is this possible. And if I do not use the action builder what can I do.

    What are you using for sending these packets? A UDP Socket? I'd assume there could be some kind of software based que for doing something like this. You just buffer all outgoing packets with some information about what packet the other wants to be sent out with, and when that packet comes in, you simply send them both at the same time.
    Do you want to append them together? So that the data segment of the packet includes the data from the other packet?
    -Jason Thomas.

  • Making a small change to an old project - How do I know what versions of Drivers and RIO etc was used for the last good build?

    If I want to make a small change to a legacy project of years ago, I want to limit my risk by using the exact same versions of LabVIEW, NI-RIO etc.  So I check out the project from the repo, but I don't know how to check what versions were used when the last know good build was made.  I don't want to introduce issues by mass-recompiling to the latest version.
    What is best practice in this case?  I could, before every repo commit, take a screenshot of MAX's software tree and save this in the project folder.
    Any ideas?  
    Solved!
    Go to Solution.

    The report is a great idea!  I store both a max technical report and a project.NCE (HW config export) with each of my projects for this exact reason.  Those files have sure come in handy!
    Also- its a good idea to make an image of the target as accepted and archive it somewhere.  ESPECIALLY for PXI based systems from NI.  (When the customer comes back for a "duplicate" just send the image with the PO and the system arrives fully configured)
    Jeff

  • HT4639 Is there a probability in future versions of keynote for ios to add and edit action builds?

    Is there a probability in future versions of keynote for ios to add and edit action builds?
    Thanks in advance

    Nobody in these forums can tell you anything about Apple's plans for new features, but you can ask for them via
    http://www.apple.com/feedback

  • What versions of iOS are supported by the latest Flash Builder 4.5.1?

    Hi, I can't seem to find what versions of iOS are supported by the current version of Flash Builder 4.5.1?
    I'm having trouble with StageWebView with iOS 4.2.1 on the iPad 1.
    thanks,

    Hi, I can't seem to find what versions of iOS are supported by the current version of Flash Builder 4.5.1?
    I'm having trouble with StageWebView with iOS 4.2.1 on the iPad 1.
    thanks,

  • I want to be able to use the ebay time zone app so I am using nightly builder version and I don't like it. What version can I use and still get my ebay thing, and how do I remove what I have? Thank you

    what version supports ebay time zone

    Sorry, but if your phone is locked to AT&T, there is no way to get your phone officially unlocked. AT&T will not unlock an iPhone for anyone for any reason. Sell it before you move & purchase a phone when you get there.

  • How hard is it to use javascript to show/hide fields. Is it easier to use the action builder?

    I know nothing about javascript and all that ive been using so far has been stuff ive found on here (thank you everyone).
    Using the action builder seems like its gonna be very tedious to do since i have so many subforms that hide, would it be esier to use javascript?

    I know nothing about javascript myself but I just created a form with about 10 different subform that show or hide depending on what the user chooses from a drop down list and I used Action Builder. If we don't know javascript, how can we use it? But Action Builder did a fine job of hiding/showing wherever I needed it. And Action Builder can do more than one thing by clicking that + sign when you are building an action.
    For instance, I needed to place a button in each subform that would close both the field that the person was working in and also the subform on the next page where the information was going into floating fields in a text block that was only visible thru a drop down list text select. I could have never figured out how to do that based on my knowledge of javascript. Thank Adobe for including Action Builder in this version of LiveCycle and I use it all the time. I find it extremely easy to use but it takes a little mental training to think thru the steps of how you can use the menu in Action Builder to make your form do what you need it to do.
    And if all else fails, ask this forum. I struggle for just so long before I come here and ask for help. I always get the answer I need. I hope you will too.
    Good luck,
    Jeanette

  • What version of iPhoto.  iPhoto 11 9.4.3 (720.91) -  What version of the Operating System. OSX 10.8.3 -  Detail.  I Attach my camera and the fields where the photos usually show up are empty and at the top of the screen it says all photos from camera are

    What version of iPhoto. iPhoto 11 9.4.3 (720.91)
    What version of the Operating System. OSX 10.8.3
    Detail.  I Attach my camera and the fields where the photos usually show up are empty and at the top of the screen it says all photos from camera are downloaded. But they are not. They can't be.
    I fixed the problem somewhat myself by removing the miniSD and manually inserting it. It did not populate automatically. I had to open iPhoto and then it populated only the most recent photos I had taken which fortunately were the only ones I need. No error messages this seems to be a new occurrence.
    Is there a way to just turn iPhoto off and download my photos to the folder of my own choosing?

    Sure - in the iPhoto prefercences set action when a camera is ocnnected to Image Capture
    LN
    Note - your cute formatting really does not add anything and makes your post hard to read and follow - try straight typing with no cute formatting in the future

  • What version of QT for Final Cut Studio 1?

    I'm building a hard drive for video editing and I seem to remember that FCP 5 (comes with Studio) doesn't play well with some newer versions of Quicktime. It will be a 10.4 machine. What version of QT should I install? Is 10.4.11 ok too?
    Thanks for your help!
    Rey

    http://www.digitalrebellion.net/blog/posts/recommendedquicktime_and_mac_os_configurations_for_final_cutpro.html

  • [svn] 1384: Splitting DefineFont into the various DefineFont 1, 2, 3, etc SWF tag formats but retaining a common base DefineFont class so that embedded fonts are still retained as symbols for the SWF dictionary no matter what version of the SWF tag is us

    Revision: 1384
    Author: [email protected]
    Date: 2008-04-24 07:54:58 -0700 (Thu, 24 Apr 2008)
    Log Message:
    Splitting DefineFont into the various DefineFont 1, 2, 3, etc SWF tag formats but retaining a common base DefineFont class so that embedded fonts are still retained as symbols for the SWF dictionary no matter what version of the SWF tag is used.
    Also improving [Embed] so that it can recognize .TTC files as assets (previously these were only recognized through CSS @font-face rules).
    QE: Yes, please add a test case for using [Embed] to embed fonts from a TTC file in addition to our tests for @font-face. Note that the AFEFontManager must be configured for this scenario.
    Doc: No
    Checkintests: Pass
    Mxunit: AtEmbed Font suite: Pass
    Modified Paths:
    flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/media/AbstractTranscoder.java
    flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/media/FontTranscoder.java
    flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/util/MimeMappings.java
    flex/sdk/trunk/modules/compiler/src/java/flex2/tools/PreLink.java
    flex/sdk/trunk/modules/swfutils/src/java/flash/fonts/CachedFontManager.java
    flex/sdk/trunk/modules/swfutils/src/java/flash/swf/Dictionary.java
    flex/sdk/trunk/modules/swfutils/src/java/flash/swf/MovieEncoder.java
    flex/sdk/trunk/modules/swfutils/src/java/flash/swf/TagDecoder.java
    flex/sdk/trunk/modules/swfutils/src/java/flash/swf/TagEncoder.java
    flex/sdk/trunk/modules/swfutils/src/java/flash/swf/TagHandler.java
    flex/sdk/trunk/modules/swfutils/src/java/flash/swf/TagValues.java
    flex/sdk/trunk/modules/swfutils/src/java/flash/swf/builder/tags/FontBuilder.java
    flex/sdk/trunk/modules/swfutils/src/java/flash/swf/tags/DefineFont.java
    flex/sdk/trunk/modules/swfutils/src/java/flash/swf/tags/DefineFontAlignZones.java
    flex/sdk/trunk/modules/swfutils/src/java/flash/swf/tags/DefineFontInfo.java
    flex/sdk/trunk/modules/swfutils/src/java/flash/swf/tools/SwfxPrinter.java
    Added Paths:
    flex/sdk/trunk/modules/swfutils/src/java/flash/fonts/DefineFont3Face.java
    flex/sdk/trunk/modules/swfutils/src/java/flash/swf/tags/DefineFont1.java
    flex/sdk/trunk/modules/swfutils/src/java/flash/swf/tags/DefineFont2.java
    flex/sdk/trunk/modules/swfutils/src/java/flash/swf/tags/DefineFont3.java
    flex/sdk/trunk/modules/swfutils/src/java/flash/swf/tags/DefineFont4.java
    Removed Paths:
    flex/sdk/trunk/modules/swfutils/src/java/flash/fonts/DefineFontFace.java

    Running the script by python2 solves it for me:
    su - mythtv -c "nice -n 19 python2 /usr/bin/tv_grab_nl_py --output ~/listings.xml"
    Best regards,
    Cedric

  • [Permanent] What Version of InDesign Do I Have?

    Since the inception of the Creative Suite there has been some confusion over what version of InDesign a user actually has.
    Version 1.0, 1.5 and 2.0 were labeled just that but the following are the actual versions for the Creative Suite:
    CS is version 3.0 (eventually patched to 3.0.1)
    CS2 is version 4.0 (eventually patched to 4.0.5)
    CS3 is the current version...version 5.0 and has been patched version 5.0.2
    To check the full version and build number cmd/ctrl+ click on About InDesign (help menu on Windows, InDesign menu on Mac.
    It is important to note that INDD files are not backward compatible but fully patched versions of CS can open files exported as InDesign Interchange (INX) by CS2 and fully patched versions of CS2 can open INX files exported by CS3.
    CS cannot open CS3 INX files and there is no way to save back to any version earlier than CS.

    Input your serial number at the link below to find out.
    http://support.apple.com/specs/

  • Project "Installer Build Product version" vs exe version

    Hi, 
    Can someone help me understand why the "Installer Build" in a project has a "product version", which later shows up in the Windows add/remove programs?  
    I must be missing something because to me it seems very strange that what they call "product version" in the installer is not automatically linked to the compiled exe version that the installer is built for?
    Now I have to try and remember to manually keep these two versions synchronized, and the build 'product version' doesn't even have the same number of fields as the exe version information?!
    It's strange when my program splash screen shows "V1.2.0.8" (read by the app by inspecting its own exe) but in the windows add/remove programs, it could say something totally different, such as 1.0.6...  
    Why is it like this??  How do other people use/handle these various version numbers?  -is there a way for my app exe to find what the installed "product version" is?
    ---Confused...
    -QFang
    QFang
    CLD LabVIEW 7.1 to 2013

    QFang wrote:
    I suppose it helps explain.. Perhaps I just need to think differently about how to name our installers..  Divorce the installer name from the (main) application name, then the difference in version numbers wouldn't be confusing. 
    Ideally the NI builder would be flexible enough that you could have a "Company Name" as the "installer name" and you could add/remove/maintain the whole company's product list with that same installer, similar to the NI installer.. sounds like a lot of work though.
    Thanks for replying!
    It does sound like a ton of work!  I have to belive it is feasable with TKs like VIPM and Deploy on the market. (A few others I am less familliar with come to mind as well)  Niether is exactly what you seem to want but demo that the tech is there!
    Jeff

  • What version of SVNKit can we expect with 11g?

    Hi,
    JDev 11g TP4 uses SVNKit 1.1.4 which does not seem to work with the current version of Subversion Server (1.5.2).
    Error: svn: Malformed Network Data
    The current version of SVNKit is 1.2.0 so the latest JDev plugin is quite behind by a number of versions.
    The only workaround at the moment is to downgrade Subversion server.
    It would be disappointing for the new release of JDev to be shipped with a plug-in that will work with current release of Subversion, will this be the case?
    thanks,
    Brenden

    Brenden,
    I just did a test using JDeveloper 11g drop 6 (which is a build that Ace Directors got for testing, later than TP4, much earlier than 11g r1) - I was able to create a new application, import it into an SVN 1.5.2 repository (via HTTP), make some changes, and commit back to the repository.
    When I use Tools->Preferences->Versioning->Subversion, I see it is using SVNKit 1.1.7 (r4142).
    I do have the SVN Server installed on my laptop, so I went into the svnkit.jar (<jdev_home>/jdev/extensions/oracle.jdeveloper.subversion) and checked the JAR file - it is, in fact, 1.1.7.
    Frank - could I ask you to clarify please (it's actually the reason I originally posted something and then deleted it). I know that JDev 11g is built on a SVN 1.4 client (not a 1.5) - I thought you may be confusing SVNKit version with SVN client version. Drop6 has svnkit 1.1.7, which does appear to work with Subversion 1.5.2 (according to [url http://www.nabble.com/svn:-Malformed-network-data-td16423851.html]this and [url https://svn.svnkit.com/repos/svnkit/tags/1.1.8/changelog.txt]this, it appears 1.1.7 is the first version to work properly with 1.5.x
    I guess we'll find out in the next week or so (or so) what version SVNKit comes with 11g r1 - but it would be awesome if it were 1.1.7 at minimum (like drop 6)
    John

  • What version of the following programs (LasPass, Kaspersky anti Virus, Internet Download Manager) are compatible with Mozilla Firefox 15.0.1?

    what version of the following programs (LasPass, Kaspersky anti Virus, Internet Download Manager) are compatible with Mozilla Firefox 15.0.1?

    Lastpass 2.0.0, Kaspersky 2012, 2013 and Internet Download Manager 6.12 build 21 are fully compatible with Firefox 15. If you are having any issue, let us know :)

  • So now because of the action builder in Acrobat X and LC 9, is scripting still necessary?

    Dont bash me for this, im a n00b and dont know anything about scripting. But it seems that I can do a lot of what I wanted to do when I didnt know how to write Java but now using the action builder I can do it.

    The action builder in LiveCycle Designer is handy for beginners to get a form to behave as they want. It generates the code that you can then look at, learn from, and further modify to suit your needs. Some of the more advanced things require customized code, so you'll need to learn scripting to move beyond the basics.

Maybe you are looking for