Action causing page numbering error
Acrobat XI, Windows 7
I have an action that crops a PDF, and saves it using PDF Optimizer settings. When I run this action on PDFs, the resulting PDFs are numbered one page higher than the original PDF (ie, the original PDF was pp. 191-195, and the PDF after the action is 192-196). I went through the action and don't see anything about page numbering that seems to apply. Any ideas why this is happening?
The PDFs are exported from InDesign CS6 (also from Windows 7).
Acrobat XI, Windows 7
I have an action that crops a PDF, and saves it using PDF Optimizer settings. When I run this action on PDFs, the resulting PDFs are numbered one page higher than the original PDF (ie, the original PDF was pp. 191-195, and the PDF after the action is 192-196). I went through the action and don't see anything about page numbering that seems to apply. Any ideas why this is happening?
The PDFs are exported from InDesign CS6 (also from Windows 7).
Similar Messages
-
After applying full scroll bar to the page including header and footer, I have provided content to
the page more than 100 lines and try to format the text from ribbon actions(format text area). On mouse over of font or fore color, the control jumps to the highlighted content area and not able to select the color. The page scrolls down and not able to click
on any action.
Consider this scenario also.
A content editor web part is added toward the bottom of the page.
Text is added to this (direct in the web part, not via a 'content link')
You highlight some text and go to the Markup Style dropdown...
Everything is fine until you hover over the "Paragraph" markup style, and suddenly the page scrolls to the web part you are editing, and you didn't have a chance
to click and apply the "Paragraph" formatting
I have tried testing this with text typed directly into the Content Editor, text pasted in from somewhere else, and text pasted in from somewhere else using "Paste as
Plaintext" option in the ribbon. In each scenario, I get the same results.
Furthermore, I have also tested this in both IE8 and IE9 and get the same results.
I can get it to occur most regularly with trying to apply the Paragraph "Markup Style" but
I've also seen this happen with Font Size (any font size). It's very frustrating since you aren't able to actually apply the formatting you need because the page jumps before you can click. Has anyone experienced this before. Any feedback would
help.Hi,
According to your post, my understanding is that after applying full scroll bar to the page including header and footer, Text editor ribbon actions cause page to automatically scroll down (while applying formatting).
I try to apply full scroll bar to the page including header and footer, the ribbon is missing after I scroll down to the web part. And I cannot apply the "Paragraph" markup style to the content.
I recommend to use the SharePoint core styles to preserve the native functionality and GUI.
By design in SharePoint, the ribbon is always at the top. When you select the content, you can apply the "Paragraph" markup style in the ribbon.
Thanks,
Linda Li
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Linda Li
TechNet Community Support -
Deleted a personalized item and now it's causing page load error
Hello All,
I once created a new field (with ID as TestID1) in a certain region through personalization. Later after deleting it, when navigated back to the page where I did my personalization, the webpage started showing error indicated something like:
"...failed to load, missing TestID1..."
Can anyone please explain me why the deleted TestID1 causing problems?
Regards,
AnandDid you chage something else to reference the fiield? If you set the profile '%Disable%Personalizations%' you can get back into the page to investigate.
-
In a page with web part zones and Content Editor web part(s) for text: if you try to edit text using the ribbon menu, sometimes hovering over an action (without clicking) will automatically scroll to the CE web part without applying formatting (since you
didn't click yet).
Consider the scenario:
A content editor web part is added toward the bottom of the page.
Text is added to this (direct in the web part, not via a 'content link')
You highlight some text and go to the Markup Style dropdown...
Everything is fine until you hover over the "Paragraph" markup style, and suddenly the page scrolls to the web part you are editing, and you didn't have a chance to click and apply the "Paragraph" formatting
I have tried testing this with text typed directly into the Content Editor, text pasted in from somewhere else, and text pasted in from somewhere else using "Paste as Plaintext" option in the ribbon. In each scenario, I get the same results.
Furthermore, I have also tested this in both IE8 and IE9 and get the same results.
This appears to happen randomly with different controls. I can get it to occur most regularly with trying to apply the Paragraph "Markup Style" but I've also seen this happen with Font Size (any font size). It's very frustrating since you aren't
able to actually apply the formatting you need because the page jumps before you can click. Has anyone experienced this before? Is there any software I should check (Silverlight, java, etc.)? Any feedback would help.
Thank you!Hi,
Thank you for your post.
I'm trying to involve someone familiar with this topic to further look at this issue. There might be some time delay. Appreciate your patience.
Xue-mei Chang
TechNet Community Support -
Action calling action cause page expires?:
Hi
I am using struts with titles. My problem is when I press the back button in the internet explorer my page expires. I tried nocache property set it as both a way in jsp.
Note: my application design is every time an action calls another action that action only brings the page.
Is this the problem? If so what is the solution.Is id the property of the sessionBean you're interested in?
Following the About the Application Model Tutorial,
To set properties I use:
getSessionBean1().set<propertyName>(<object>)
getSessionBean1().setID(new Integer(problemRowSet.getInt("ID")To get properties I use:
getSessionBean1().get<propertyName>()
getSessionBean1().getID()As for the button action event, I'd right click it in the designer to let Creator generate the function. If I fill it in myself sometimes Creator acts like it wasn't there. :( -
[[ Page Flow Error - Action Not Found ]] - urgent help needed!
Hi all,
My portal application runs on Weblogic 8.1 and I am encountering a vague error which does not point back to any of the application-based files. The error message, as stated in the subject, is
"Page Flow Error - Action Not Found"
I did modify the url-template-config.xml under groWeb/WEB_INF to add a new template to enforce secure access to application resources. Could this have caused the above error?
Any feedback would be greatly appreciated!!
Thanks.Here is just a portion of Page Controller class
package com.amd.portal.presentation.GeneralRegistration
public class GeneralRegistrationController extends PageFlowController
* @jpf:action
* @jpf:forward name="success" path="RegistrationConfirmation.jsp"
* @jpf:validation-error-forward name="failure" path="index.jsp"
public Forward registerUser(RegisterUserForm register_form)
usermanager_ctrl.registerUser(register_form, this.getRequest());
return new Forward( "success", register_form);
Here is a portion of the code from the JSP that uses this controller
<netui:form action="registerUser">
<tr valign="top">
<td><font color="red"> * </font> User Name:</td>
<td>
<netui:textBox dataSource="{actionForm.userName}"/>
  Â
<netui:error value="userName"/>
</td>
</tr>
<tr valign="top">
<td><font color="red"> * </font> Password:</td>
<td>
<netui:textBox dataSource="{actionForm.password}" password="true" />
  Â
<netui:error value="password"/>
</td>
</tr>
<netui:button value="Submit" type="submit"/>
</netui:form>
This apparently doesn't display well when posted but I can email to you if you provide me with your email address. Thanks.
- CW
Message was edited by:
lcwalters -
Error installing pages numbers keynotes. Always end up with "An error occurred"
error installing pages numbers keynotes. Always end up with "An error occurred".
App storeLaunch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Select
/var/log ▹ install.log
from the hierarchical list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar. Then select the messages from the last installation or update attempt, starting from the time when you initiated it. If you're not sure when that was, start over and note the time. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting. -
All Files Error after Update Pages, Numbers and Keynote, Why ?
Dear Apple Lovers,
I am using ipad 2 Wifi + 3G 64 GB, I had updated my ipad from ios 4.1.3 to ios 7.1.1 two week ago.
After that All aplication and all file can be opened properly well.
The problem came after I updated Keynote, Pages & Numbers, all files could not be opened & all file name is change from alphabetical to numerical. All file content 2 type of file, 1 BuildVersionHistory and the other one is index.
if i open the file ... spreadsheet can't be imported... the file format is invalid
or in Pages...
document can't be imported... the file format is invalid...
If I want to share that document via icloud ... Can't Send Spreadsheet.. To send this spreadsheet, open it in Numbers for iOS first.
In other case... I create a new file in Pages, Numbers or Keynote.. but all the new files can't view in Tab Apps when my ipad is connected to my mac pro via iTunes. If I create a file using other aplication (example using DocToGo), a new file that is created can be seen directly in iTunes Tab Apps DocToGo.
in this morning when i open Numbers all my files are disappear including new file without the reason at all, please give me the best solution. I need your help very very urgent.... since my working datas is very very important.
Thanks and Best Wishes,
AsdansI'm having the same problem with Numbers files. The open on my iPad, but not on my Mac running Mavericks.
-
Pages, Numbers, Keynote issue with WebDAV
I am in need of your assistance as the new version of Keynote appears to be causing issues, and I am not sure where to go or what to do to report this.
Here is the situation.
We have a Sharepoint server running WebDAV services. Our students use WebDAV capable applications on their iPads such as Pages, Numbers, Keynote, WebDAV NAV +, etc. They create files using these apps on their iPads and then save them to their "WebDAV" folder on the SharePoint server. This is necessary so that students may access their files via the iPad in our LMS and turn in assignments via a digital dropbox. This has worked fine in the past until the update of Pages, Numbers, and Keynote. In the past these apps on the iPad have always placed a single file on the server to which the students could go in and retrieve the file or send it to a digital dropbox in our LMS through a WebDAV connection between the LMS and the SharePoint server.
With the update of these apps on the iPad to the newest version, Pages, Numbers, and Keynote now place a folder on the SharePoint server of which it contains the following items: folder titled "Data", folder titled "Metadata", icon titled index.zip, icon titled preview-micro.jpg, icon titled preview-web.jpg, icon titled preview.jpg.
The issue is that now with this being a folder, students are no longer able to retrieve the file nor are they able to go into the LMS and send the file to a digital dropbox as it is now a folder and not a packaged file.
This is a serious setback to us as it renders Pages, Numbers, and Keynote useless since they can not use their iPads to retrieve or submit their assignments to a dropbox in an LMS or bring it back to the apps on the iPad.
As I said earlier, this worked perfectly fine prior to the new version of Pages, Keynote, and Numbers.
I believe this to be a Pages, Numbers, Keynote issue as when I send the file from Keynote to the WebDAV folder as a PPT, everything works fine. Kind of hard to get the staff to use Keynote when all they see is the "PowerPoint" verson works with no issues. Also, this would be a poor work around for something that use to work in the past.
Anyone else experience this or have suggestions?
Thank you in advance.I'm not sure if this is exactly what your original post is about but I saw the comments under it talking about
getting the same notification over and over again that dropbox files were updated, like it's in a loop and won't stop. I also am seeing the properties.plist, index.zip and preview-micro.jpg as the updated file names when I click on my little dropbox icon on the top of my desktop. I am on a Macbook Air OS X 10.9 (Maverick). I've been using dropbox for a while and this seems to have started after I upgraded to Maverick.
I wrote to Dropbox and here is the process they had me follow to correct this problem, and it worked perfectly, so I thought I'd share (**the only step that I didn't do is step 4 because I couldn't find the dropboxhelpertools folder in my library):
Thank you for contacting Dropbox Support!
There appears to be a problem with the Dropbox software currently installed on your computer. I'm going to have you do a full reinstall and resync to attempt to fix the problem.First, make sure you save and quit ALL programs that access files in the Dropbox folder.
Here are the steps:
1. Download the newest version:
- http://www.dropbox.com/install/
2. Stop the Dropbox desktop application (if needed)
- Click on the Dropbox icon.
- Choose Quit/Stop/Exit
3. Delete Dropbox meta-data folder:
- To delete this folder open a Terminal (Located at /Applications/Utilities/Terminal for Mac OS)
- Copy and paste the following lines into the Terminal and press RETURN:
mv ~/.dropbox ~/.Trash/dropbox.old
- This will move the folder to the Trash and make it visible.
4. Delete the Dropbox Contextual Menu Item Plugin
- Open the Finder and select Go to folder... from the Go menu (or press Shift-Command-G)
- A dialog box should appear. Now copy and paste the following line into the box and press the return key:
/Library/
- Finally drag the DropboxHelperTools folder to the Trash and enter your Administrator password if prompted to complete this action.
5. Reinstall the Dropbox desktop application
- Open the Dropbox .dmg file and double click the Dropbox icon.
- Dropbox should appear in your menu bar.
- Relink your account. -
HelloThank's for your helpsI hope this document is helpfulBest Regards,
Date: Sun, 22 Jun 2014 17:10:17 -0700
From: [email protected]
To: [email protected]
Subject: when i open pdf file it open all the pages but some pages give error massage (there was error processing a page,there was a problem reading this document 110) but if i open this page which give me error with google chrome it's work ? if you can help me th
when i open pdf file it open all the pages but some pages give error massage (there was error processing a page,there was a problem reading this document 110) but if i open this page which give me error with google chrome it's work ? if you can help m
created by Anoop9178 in Adobe Reader - View the full discussion
Hi,
Would it be possible for you to share the document?
Regards,
Anoop
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6485431#6485431
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Adobe Reader by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.thank's for reply and your help
i did the step's that you told me but i still have the same problem
i have the latest v.11.0.7
i
i disable the protected mode -
Page numbering in rtf templates
Hi All,
I have an rtf template and what I want is to display page numbers. I can achieve this with the following : <?fo:page-number?> but I want to display it by different way:
For example if the total pages in the output is 10 pages I want the page number to be displayed as Page 1 of 10, 2 of 10, 3 of 10 etc.
Any ideas?
Thanks in advance,
Konska torWell, it's fixed itself. It still doesn't work on my home computer, but it does work on my work computer... as long as it works in Oracle eBus I'm happy :) Must be a certain version of word that causes the problem.
-
Page numbers not working in pages
Help!
I'm working on a document that will be 100+ pages, printing it double sided to be bound together. I would like to have the pages numbers listed in the footer on the outside of the page as well as some text in the center of the footer. Working with Pages '09 version 4.1.
I have "facing pages" selected. "Left and Right pages different" selected. "Use previous headers and footers" selected. I selected "Insert Auto page numbers" and told it to put them on the outside.
The problem - only some pages have the numbers on the outside like I selected. Pages 1-12 have the page numbers are all left justified. Pages 13-16 are correct. Pages 17-23 have the page numbers are all left justified. So on and so forth. There is no rhyme or reason why some of these are different. I do have different sections in the document - but sometimes it's in the middle of the section that it decides to change the formatting on me.
On top of that, I added the text I wanted in the center. On some pages it's there, others it isn't. And again, no rhyme or reason as to why. Sometimes, the page numbers ARE in the correct place, but the text IS NOT there. Sometimes the page numbers ARE NOT in the correct place, and the text IS there. Leaving me with very few pages that are 100% correct.
The only thing I have going for me at the moment is that every page has a page number on it! I suppose that's something. And I believe I know how to go in and change the footers individually. But, like I said, this will be 100+ pages, I'd really like to just do it once, not individually for each page.
Help please! Thanks!Hello black94,
Ok I can load the WinForm project and know part of your game, although I'm not so sure how to play the game. I cannot understand your language.
When I checked the WPF project it seems you build the UI with WPF and only write events here, I haven't find binding related xaml code. Anyway, can you quote the problem or code about how you insert the white cell in WPF?
For the printPreviewDialog, I see you already asked about this question before:
https://social.msdn.microsoft.com/Forums/vstudio/en-US/ee97efd9-9245-4972-8576-a5230fb520e7/printpreviewdialog-in-wpf?forum=wpf
So the following place is where the error raised?
PrintDocument printdocument = new PrintDocument();
System.Windows.Controls.PrintDialog printDialog = new System.Windows.Controls.PrintDialog();
System.Windows.Forms.PrintPreviewDialog printPreviewDialog1 = new System.Windows.Forms.PrintPreviewDialog();
//this.printPreviewDialog1.Document = this.printDocument1;
Regards,
Barry
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
Extract PDF pages with it's actual page numbers...
Hi scripting gurus,
We have more than 40 of PDF documents each document contain multiple pages. Using Acrobat Professional 7.0 and 8.0 with MAC platform. We have the script to extract the pages and to suffix running numbers with the document name, please find the script below. For example CH01.pdf document total number of pages is 10, but the actual page number starts with 11. So We have to extract each pages as individual documents and the page number will followed by document name with "_" separation, (Eg: CH01_11.pdf). I have tried so many ways to include the page numbers with the document name but i can't.
/*Split pdf pages with pNum suffixed*/
var rename = /.*\/|\.pdf$/ig;
var startName = this.path.replace(rename,"");
for (var i = 1, j = 0; j < numPages; i += 1, j += 1) {
extractPages ({
nStart : j,
nEnd : j == numPages - 1 ? j : j + 0,
cPath : "/Macintosh HD/Users/Beaconpmg/Desktop/ExtractFolder/"+startName+"_"+i+".pdf"
So please can anyone look into this and help for me.
Thanks in advance.
Regards
Thiyagutry67
First of all, replace numPages with this.numPages
Also, this doesn't make any sense:
nEnd : i == numPages - 1
I have tried what you have said above, but it is not working. Its showing the same error (missing ; before statement)in 4th line of the script.
Please find the complete code below;
// see if we need to define a global offset first file
if(global.fPageOffset == undefined) {
var global.fPageOffset = 10; // start at 10
/*Split pdf pages with pNum suffixed*/
var rename = /.*\/|\.pdf$/ig;
var startName = this.path.replace(rename,"");
for (var i = 0; i < this.numPages; i++) { this.extractPages ({ nStart : i, nEnd : i == this.numPages - 1 , cPath : "/Macintosh HD/Users/Beaconpmg/Desktop/ExtractFolder/" + startName + "_" + (i + global.PageOffset) + ".pdf" }); }
// add finished file's number of pages to global page offest
global.fPageOffest += this.numPages;
Regards
Thiyagu -
How do I get all pages numbered in an 800 page combined pdf document?
I took 12 PP presentations and made the handouts into pdfs. Then did the drag and drop into acrobat pro xi. It comes out to about 800 pages, but I cannot get it to print page numbers?
Bill,
I get an error message for the 757 page document do as you say. I made a header center for pages 1 to 757, get message, "a number is out of range"
Carl -
Page Numbering w/ASP and Dreamweaver CS3
I am new to this so please bear with me if this question has been asked a million times. I have a single search parameter searching for a "Department", the result displays on the next page (The Results page). This works fine. I am using DW CS3 and I am now finding out that when I use it with ASP it only allows the Previous, Next, First, Last, Specific records to be displayed.
I really want it to display the total amount of pages by numbers Example: (1-10, 11-21, etc...). Can someone please help me? I have searched the web and came across this site http://www.dmxzone.com/go?12449. I am not following where to put the code he suggest. Can someone please help me?
Thanks for any help in advance.
Here is the asp code I have for my Results page:
<%@LANGUAGE="VBSCRIPT"%>
<!--#include file="Connections/BishopsLogin.asp" -->
<%
Dim rs_Results__MMColParam
rs_Results__MMColParam = "1"
If (Request.QueryString("Department") <> "") Then
rs_Results__MMColParam = Request.QueryString("Department")
End If
%>
<%
Dim rs_Results
Dim rs_Results_cmd
Dim rs_Results_numRows
Set rs_Results_cmd = Server.CreateObject ("ADODB.Command")
rs_Results_cmd.ActiveConnection = MM_BishopsLogin_STRING
rs_Results_cmd.CommandText = "SELECT Department, SubpageTitle, LinkDescription, URL, DateLastModified FROM dbo.Episcopal_Data_Files WHERE Department = ?"
rs_Results_cmd.Prepared = true
rs_Results_cmd.Parameters.Append rs_Results_cmd.CreateParameter("param1", 200, 1, 30, rs_Results__MMColParam) ' adVarChar
Set rs_Results = rs_Results_cmd.Execute
rs_Results_numRows = 0
%>
<%
Dim Repeat1__numRows
Dim Repeat1__index
Repeat1__numRows = 5
Repeat1__index = 0
rs_Results_numRows = rs_Results_numRows + Repeat1__numRows
%>
<%
' *** Recordset Stats, Move To Record, and Go To Record: declare stats variables
Dim rs_Results_total
Dim rs_Results_first
Dim rs_Results_last
' set the record count
rs_Results_total = rs_Results.RecordCount
' set the number of rows displayed on this page
If (rs_Results_numRows < 0) Then
rs_Results_numRows = rs_Results_total
Elseif (rs_Results_numRows = 0) Then
rs_Results_numRows = 1
End If
' set the first and last displayed record
rs_Results_first = 1
rs_Results_last = rs_Results_first + rs_Results_numRows - 1
' if we have the correct record count, check the other stats
If (rs_Results_total <> -1) Then
If (rs_Results_first > rs_Results_total) Then
rs_Results_first = rs_Results_total
End If
If (rs_Results_last > rs_Results_total) Then
rs_Results_last = rs_Results_total
End If
If (rs_Results_numRows > rs_Results_total) Then
rs_Results_numRows = rs_Results_total
End If
End If
%>
<%
Dim MM_paramName
%>
<%
' *** Move To Record and Go To Record: declare variables
Dim MM_rs
Dim MM_rsCount
Dim MM_size
Dim MM_uniqueCol
Dim MM_offset
Dim MM_atTotal
Dim MM_paramIsDefined
Dim MM_param
Dim MM_index
Set MM_rs = rs_Results
MM_rsCount = rs_Results_total
MM_size = rs_Results_numRows
MM_uniqueCol = ""
MM_paramName = ""
MM_offset = 0
MM_atTotal = false
MM_paramIsDefined = false
If (MM_paramName <> "") Then
MM_paramIsDefined = (Request.QueryString(MM_paramName) <> "")
End If
%>
<%
' *** Move To Record: handle 'index' or 'offset' parameter
if (Not MM_paramIsDefined And MM_rsCount <> 0) then
' use index parameter if defined, otherwise use offset parameter
MM_param = Request.QueryString("index")
If (MM_param = "") Then
MM_param = Request.QueryString("offset")
End If
If (MM_param <> "") Then
MM_offset = Int(MM_param)
End If
' if we have a record count, check if we are past the end of the recordset
If (MM_rsCount <> -1) Then
If (MM_offset >= MM_rsCount Or MM_offset = -1) Then ' past end or move last
If ((MM_rsCount Mod MM_size) > 0) Then ' last page not a full repeat region
MM_offset = MM_rsCount - (MM_rsCount Mod MM_size)
Else
MM_offset = MM_rsCount - MM_size
End If
End If
End If
' move the cursor to the selected record
MM_index = 0
While ((Not MM_rs.EOF) And (MM_index < MM_offset Or MM_offset = -1))
MM_rs.MoveNext
MM_index = MM_index + 1
Wend
If (MM_rs.EOF) Then
MM_offset = MM_index ' set MM_offset to the last possible record
End If
End If
%>
<%
' *** Move To Record: if we dont know the record count, check the display range
If (MM_rsCount = -1) Then
' walk to the end of the display range for this page
MM_index = MM_offset
While (Not MM_rs.EOF And (MM_size < 0 Or MM_index < MM_offset + MM_size))
MM_rs.MoveNext
MM_index = MM_index + 1
Wend
' if we walked off the end of the recordset, set MM_rsCount and MM_size
If (MM_rs.EOF) Then
MM_rsCount = MM_index
If (MM_size < 0 Or MM_size > MM_rsCount) Then
MM_size = MM_rsCount
End If
End If
' if we walked off the end, set the offset based on page size
If (MM_rs.EOF And Not MM_paramIsDefined) Then
If (MM_offset > MM_rsCount - MM_size Or MM_offset = -1) Then
If ((MM_rsCount Mod MM_size) > 0) Then
MM_offset = MM_rsCount - (MM_rsCount Mod MM_size)
Else
MM_offset = MM_rsCount - MM_size
End If
End If
End If
' reset the cursor to the beginning
If (MM_rs.CursorType > 0) Then
MM_rs.MoveFirst
Else
MM_rs.Requery
End If
' move the cursor to the selected record
MM_index = 0
While (Not MM_rs.EOF And MM_index < MM_offset)
MM_rs.MoveNext
MM_index = MM_index + 1
Wend
End If
%>
<%
' *** Move To Record: update recordset stats
' set the first and last displayed record
rs_Results_first = MM_offset + 1
rs_Results_last = MM_offset + MM_size
If (MM_rsCount <> -1) Then
If (rs_Results_first > MM_rsCount) Then
rs_Results_first = MM_rsCount
End If
If (rs_Results_last > MM_rsCount) Then
rs_Results_last = MM_rsCount
End If
End If
' set the boolean used by hide region to check if we are on the last record
MM_atTotal = (MM_rsCount <> -1 And MM_offset + MM_size >= MM_rsCount)
%>
<%
' *** Go To Record and Move To Record: create strings for maintaining URL and Form parameters
Dim MM_keepNone
Dim MM_keepURL
Dim MM_keepForm
Dim MM_keepBoth
Dim MM_removeList
Dim MM_item
Dim MM_nextItem
' create the list of parameters which should not be maintained
MM_removeList = "&index="
If (MM_paramName <> "") Then
MM_removeList = MM_removeList & "&" & MM_paramName & "="
End If
MM_keepURL=""
MM_keepForm=""
MM_keepBoth=""
MM_keepNone=""
' add the URL parameters to the MM_keepURL string
For Each MM_item In Request.QueryString
MM_nextItem = "&" & MM_item & "="
If (InStr(1,MM_removeList,MM_nextItem,1) = 0) Then
MM_keepURL = MM_keepURL & MM_nextItem & Server.URLencode(Request.QueryString(MM_item))
End If
Next
' add the Form variables to the MM_keepForm string
For Each MM_item In Request.Form
MM_nextItem = "&" & MM_item & "="
If (InStr(1,MM_removeList,MM_nextItem,1) = 0) Then
MM_keepForm = MM_keepForm & MM_nextItem & Server.URLencode(Request.Form(MM_item))
End If
Next
' create the Form + URL string and remove the intial '&' from each of the strings
MM_keepBoth = MM_keepURL & MM_keepForm
If (MM_keepBoth <> "") Then
MM_keepBoth = Right(MM_keepBoth, Len(MM_keepBoth) - 1)
End If
If (MM_keepURL <> "") Then
MM_keepURL = Right(MM_keepURL, Len(MM_keepURL) - 1)
End If
If (MM_keepForm <> "") Then
MM_keepForm = Right(MM_keepForm, Len(MM_keepForm) - 1)
End If
' a utility function used for adding additional parameters to these strings
Function MM_joinChar(firstItem)
If (firstItem <> "") Then
MM_joinChar = "&"
Else
MM_joinChar = ""
End If
End Function
%>
<%
' *** Move To Record: set the strings for the first, last, next, and previous links
Dim MM_keepMove
Dim MM_moveParam
Dim MM_moveFirst
Dim MM_moveLast
Dim MM_moveNext
Dim MM_movePrev
Dim MM_urlStr
Dim MM_paramList
Dim MM_paramIndex
Dim MM_nextParam
MM_keepMove = MM_keepBoth
MM_moveParam = "index"
' if the page has a repeated region, remove 'offset' from the maintained parameters
If (MM_size > 1) Then
MM_moveParam = "offset"
If (MM_keepMove <> "") Then
MM_paramList = Split(MM_keepMove, "&")
MM_keepMove = ""
For MM_paramIndex = 0 To UBound(MM_paramList)
MM_nextParam = Left(MM_paramList(MM_paramIndex), InStr(MM_paramList(MM_paramIndex),"=") - 1)
If (StrComp(MM_nextParam,MM_moveParam,1) <> 0) Then
MM_keepMove = MM_keepMove & "&" & MM_paramList(MM_paramIndex)
End If
Next
If (MM_keepMove <> "") Then
MM_keepMove = Right(MM_keepMove, Len(MM_keepMove) - 1)
End If
End If
End If
' set the strings for the move to links
If (MM_keepMove <> "") Then
MM_keepMove = Server.HTMLEncode(MM_keepMove) & "&"
End If
MM_urlStr = Request.ServerVariables("URL") & "?" & MM_keepMove & MM_moveParam & "="
MM_moveFirst = MM_urlStr & "0"
MM_moveLast = MM_urlStr & "-1"
MM_moveNext = MM_urlStr & CStr(MM_offset + MM_size)
If (MM_offset - MM_size < 0) Then
MM_movePrev = MM_urlStr & "0"
Else
MM_movePrev = MM_urlStr & CStr(MM_offset - MM_size)
End If
%>
function MM_swapImgRestore() { //v3.0
var i,x,a=document.MM_sr; for(i=0;a&&i<a.length&&(x=a[i])&&x.oSrc;i++) x.src=x.oSrc;
function MM_preloadImages() { //v3.0
var d=document; if(d.images){ if(!d.MM_p) d.MM_p=new Array();
var i,j=d.MM_p.length,a=MM_preloadImages.arguments; for(i=0; i<a.length; i++)
if (a[i].indexOf("#")!=0){ d.MM_p[j]=new Image; d.MM_p[j++].src=a[i];}}
function MM_findObj(n, d) { //v4.01
var p,i,x; if(!d) d=document; if((p=n.indexOf("?"))>0&&parent.frames.length) {
d=parent.frames[n.substring(p+1)].document; n=n.substring(0,p);}
if(!(x=d[n])&&d.all) x=d.all[n]; for (i=0;!x&&i<d.forms.length;i++) x=d.forms[i][n];
for(i=0;!x&&d.layers&&i<d.layers.length;i++) x=MM_findObj(n,d.layers[i].document);
if(!x && d.getElementById) x=d.getElementById(n); return x;
function MM_swapImage() { //v3.0
var i,j=0,x,a=MM_swapImage.arguments; document.MM_sr=new Array; for(i=0;i<(a.length-2);i+=3)
if ((x=MM_findObj(a[i]))!=null){document.MM_sr[j++]=x; if(!x.oSrc) x.oSrc=x.src; x.src=a[i+2];}
function MM_nbGroup(event, grpName) { //v6.0
var i,img,nbArr,args=MM_nbGroup.arguments;
if (event == "init" && args.length > 2) {
if ((img = MM_findObj(args[2])) != null && !img.MM_init) {
img.MM_init = true; img.MM_up = args[3]; img.MM_dn = img.src;
if ((nbArr = document[grpName]) == null) nbArr = document[grpName] = new Array();
nbArr[nbArr.length] = img;
for (i=4; i < args.length-1; i+=2) if ((img = MM_findObj(args[i])) != null) {
if (!img.MM_up) img.MM_up = img.src;
img.src = img.MM_dn = args[i+1];
nbArr[nbArr.length] = img;
} else if (event == "over") {
document.MM_nbOver = nbArr = new Array();
for (i=1; i < args.length-1; i+=3) if ((img = MM_findObj(args[i])) != null) {
if (!img.MM_up) img.MM_up = img.src;
img.src = (img.MM_dn && args[i+2]) ? args[i+2] : ((args[i+1])? args[i+1] : img.MM_up);
nbArr[nbArr.length] = img;
} else if (event == "out" ) {
for (i=0; i < document.MM_nbOver.length; i++) {
img = document.MM_nbOver[i]; img.src = (img.MM_dn) ? img.MM_dn : img.MM_up; }
} else if (event == "down") {
nbArr = document[grpName];
if (nbArr)
for (i=0; i < nbArr.length; i++) { img=nbArr[i]; img.src = img.MM_up; img.MM_dn = 0; }
document[grpName] = nbArr = new Array();
for (i=2; i < args.length-1; i+=2) if ((img = MM_findObj(args[i])) != null) {
if (!img.MM_up) img.MM_up = img.src;
img.src = img.MM_dn = (args[i+1])? args[i+1] : img.MM_up;
nbArr[nbArr.length] = img;
function MM_jumpMenu(targ,selObj,restore){ //v3.0
eval(targ+".location='"+selObj.options[selObj.selectedIndex].value+"'");
if (restore) selObj.selectedIndex=0;
//-->
</script><script language="JavaScript" src="mm_menu.js"></script>
<link href="stylesheet.css" rel="stylesheet" type="text/css" />
</head>
<body onLoad="MM_preloadImages('images/nav_about_on.gif','images/nav_departments_on.gif','image s/nav_calendar_on.gif','images/nav_links_on.gif','images/nav_contact_on.gif','images/nav_h ome_on.gif','images/nav_forms_on.gif')">
<script language="JavaScript1.2">mmLoadMenus();</script>
<div align="center">
<table width="760" border="0" cellspacing="0" cellpadding="0">
<tr bgcolor="#ffffff" valign="top">
<td><a href="index.html"><img src="images/logobar_left.gif" alt="GCFA: Serving the Church through the ministry of administration" width="186" height="103" border="0" /></a><img src="images/blurb.gif" alt="General Council on Finance and Administration. The United Methodist Church" /></td>
</tr>
</table>
<table width="760" border="0" cellspacing="0" cellpadding="0" height="20">
<form method="get" action="http://google.umc.org/search" name="xxx">
<tr height="20" style="vertical-align: middle;">
<td bgcolor="#000000" width="580"><a href="#" onMouseOut="MM_swapImgRestore()" onMouseOver="MM_swapImage('about','','images/nav_about_on.gif',1)"><img src="images/nav_about.gif" alt="About Us" name="about" width="70" height="20" border="0" id="about" onMouseOver="MM_showMenu(window.mm_menu_0523125900_0,0,20,null,'about')" onMouseOut="MM_startTimeout();" /></a><a href="#" onMouseOut="MM_swapImgRestore()" onMouseOver="MM_swapImage('departments','','images/nav_departments_on.gif',1)"><img src="images/nav_departments.gif" alt="Departments & Services" name="departments" width="146" height="20" border="0" id="departments" onMouseOver="MM_showMenu(window.mm_menu_0516155917_0,0,20,null,'departments')" onMouseOut="MM_startTimeout();" /></a><a href="#" onMouseOut="MM_swapImgRestore()" onMouseOver="MM_swapImage('forms','','images/nav_forms_on.gif',1)"><img src="images/nav_forms.gif" alt="Forms/Reports" name="forms" width="105" height="20" border="0" id="forms" onMouseOver="MM_showMenu(window.mm_menu_0523125955_0,0,20,null,'forms')" onMouseOut="MM_startTimeout();" /></a><a href="calendar.html" onMouseOut="MM_swapImgRestore()" onMouseOver="MM_swapImage('calendar','','images/nav_calendar_on.gif',1)"><img src="images/nav_calendar.gif" alt="UM Calendar" name="calendar" width="89" height="20" border="0" id="calendar" /></a><a href="links.html" onMouseOut="MM_swapImgRestore()" onMouseOver="MM_swapImage('links','','images/nav_links_on.gif',1)"><img src="images/nav_links.gif" alt="Helpful Links" name="links" width="39" height="20" border="0" id="links" /></a><a href="contactus.html" onMouseOut="MM_swapImgRestore()" onMouseOver="MM_swapImage('contact','','images/nav_contact_on.gif',1)"><img src="images/nav_contact.gif" alt="Contact Us" name="contact" width="78" height="20" border="0" id="contact" /></a><a href="index.html" onMouseOut="MM_swapImgRestore()" onMouseOver="MM_swapImage('home','','images/nav_home_on.gif',1)"><img src="images/nav_home.gif" alt="Home" name="home" width="38" height="20" border="0" id="home" /></a></td>
<td bgcolor="#990000" width="51" align="center" style="font: 11px arial, helvetica, sans-serif; color: #ffffff;"><img src="images/btn_search.gif" alt="Search" width="51" height="20" /></td>
<td bgcolor="#990000"><input name="q" type="text" size="15" style="font: 10px arial, helvetica, sans-serif;"/></span></td>
<td width="33" bgcolor="#990000"><input type="image" name="submit" src="images/btn_go.gif" alt="GO!" width="31" height="20" /></td>
</tr>
<input type="hidden" name="sort" value="date:D:L:d1">
<input type="hidden" name="output" value="xml_no_dtd">
<input type="hidden" name="ie" value="UTF-8">
<input type="hidden" name="oe" value="UTF-8">
<input type="hidden" name="client" value="GCFA_GCFAorg_Frontend">
<input type="hidden" name="proxystylesheet" value="GCFA_GCFAorg_Frontend">
<input type="hidden" name="site" value="GCFA_GCFAorg_Collection">
</form>
</table>
<table width="760" border="0" cellspacing="0" cellpadding="0">
<tr valign="top">
<td height="353" style="background-color: #dddddd; width: 150px;">
<table width="150" border="0" cellspacing="0" cellpadding="0">
<tr style="background-color: #990000;" height="25">
<td style="font: bold 11px arial, helvetica, sans-serif; color: #ffffff; text-align: center;">Department Resources</td>
</tr>
<tr>
<td><div style="font: 11px arial, helvetica, sans-serif; color: #000000; text-align: left; margin-left: 10px; margin-right: 10px; margin-bottom: 5px; margin-top: 5px;">
<p>PDF documents require using the<span class="style5"><a href="http://www.adobe.com/products/acrobat/readstep2.html" target="_blank"> latest version</a> </span>of the freely available Adobe Reader for proper viewing. Click on
the <span class="style5"><a href="http://www.adobe.com/products/acrobat/readstep2.html" target="_blank">Get Adobe Reader</a></span> link below for
download and installation instructions. <br />
<br />
<a href="http://www.adobe.com/products/acrobat/readstep2.html" target="_blank"><img src="images/get_adobe_reader.gif" alt="Get Adobe Reader" width="112" height="33" border="0" /></a></span><br>
<a href="images/get_adobe_reader.gif" target="_blank"></a><br />
</p>
</div></td>
</tr>
<tr style="background-color: #3C5D15;" height="25">
<td bgcolor="#DDDDDD" style="font: bold 12px arial, helvetica, sans-serif; color: #ffffff; text-align: center;"> </td>
</tr>
<tr>
<td>
<div style="font: 11px arial, helvetica, sans-serif; color: #000000; text-align: left; margin-left: 10px; margin-right: 10px; margin-bottom: 5px; margin-top: 5px;">
<p><br />
<br />
<br />
</p>
</div> </td>
</tr>
</table>
<p> </p></td>
<td style="background-color: #000000; width: 2px;"><img src="images/pixel_black.gif" width="2" height="10" /></td>
<td bordercolor="#FFFFFF" bgcolor="#FFFFFF" style="background-color: #ffffff; width: 610px;">
<div style="margin-left: 20px; margin-right: 20px; margin-bottom: 20px; margin-top: 5px;">
<table width="100%" border="0" cellspacing="2" cellpadding="2">
<tr>
<td height="285" align="left" valign="top"><p><font face="Arial" color="#990000"><span style="font-size: 16px; font-weight: 700">Episcopal Services Data Files</span></font></p>
<p><font face="Arial" color="#990000"><span style="font-size: 16px; font-weight: 700"><br />
</span></font>
</p>
<br />
<%
While ((Repeat1__numRows <> 0) AND (NOT rs_Results.EOF))
%>
<table border="0" cellpadding="1" cellspacing="1">
<tr>
<td width="132" height="27" bgcolor="#DDDDDD"><div align="center"><strong>Department</strong></div></td>
<td width="371" bgcolor="#DDDDDD"><%=(rs_Results.Fields.Item("Department").Value)%></td>
</tr>
<tr>
<td height="22"><div align="center"><strong>Subpage Title</strong></div></td>
<td><%=(rs_Results.Fields.Item("SubpageTitle").Value)%></td>
</tr>
<tr>
<td height="26" bgcolor="#DDDDDD"><div align="center"><strong>Link Description</strong></div></td>
<td bgcolor="#DDDDDD"><%=(rs_Results.Fields.Item("LinkDescription").Value)%></td>
</tr>
<tr>
<td height="25"><div align="center"><strong>Date Last Modified</strong></div></td>
<td><%=(rs_Results.Fields.Item("DateLastModified").Value)%></td>
</tr>
<tr>
<td height="26" bgcolor="#DDDDDD"><div align="center"><strong>URL</strong></div></td>
<td bgcolor="#DDDDDD"><%=(rs_Results.Fields.Item("URL").Value)%></td>
</tr>
</table>
<br />
<%
Repeat1__index=Repeat1__index+1
Repeat1__numRows=Repeat1__numRows-1
rs_Results.MoveNext()
Wend
%>
<%
rs_Results.Close()
Set rs_Results = Nothing
%>Please ignore my first post, it isn't right.
I am new at this, although I did figure out the tutorial it still isn't what I am wanting. I am going to send an example page of want I my page to look like when I said page numbering (I don't want first,prev,next, or last). I want numbers like the results you will get from this page. http://www.gcfa.org/Department_Resources.aspx Can I do this with ASP?
If so so can someone please show me how? Thanks in advance. Maybe I have the right question this time.
Maybe you are looking for
-
Creation of a root organnization.
Hi , We creat root organization structures via the transaction PPOCE. Now i have to create these org structures Programatically.. Are there any standard Function modules which can be used ? . Also i need to create a new position underneath it . Ple
-
What to look for in a used iBook G3?
Hi, I'm in the process of looking at a used iBook G3 with 640 MB SDRAM and 40 GB HD. Anything I should look for that could make or break a deal? (I'm new to Apple and have never owned or used one)! thanks in advance
-
Flash Player pops up on every website I search using Explorer
About a week ago, every time I opened Explorer, a box appeared from Internet Explorer Security stating "a website wants to open web content using this program (Adobe Flash Player), on your computer. Allow or Not Allow". Doesn't matter if I allow, n
-
How to get the ADF Mobile Client extension
Hi all, Please post some link in which I can download the ADF Mobile Client extension for Jdeveloper 11.1.1.4.0 directly to my local disk. I have tried going through Help --> Check for updates in Jdeveloper but my proxy does not allow it. so the only
-
File selection in Library module
I'm new to Lightroom so please forgive me if the answer to this question is obvious, but I haven't been able to find a way to do it ... How does one select only files of a particular extension, e.g. tiffs or dng files?