Action recording software?

Can someone tell me if there are action recording software?
I'm doing repetitive tasks over and over again in FCPX
I just had a thought: I could automate using an action recording tool
I know I could do in Windows, there are a few things That I've tried in the past that could be used
I've looked at Automator and that doesnt quite fit the bill - or actually, maybe I havent got my head round how to use it!
Are there any 3rd party tools that will record what windows you are using and record the phyisical location of mouse clicks for example?
Thanks
Omar

Or Quicktime, which you probably have.

Similar Messages

Diskspace quota with WVC54GCA video recording software

I'm using several WVC54GCA cameras with good results with one exception - I cannot get the diskspace quota feature in the video recording software to work correctly. I want to limit each camera to 25GB of video on disk, and overwrite older data when the quota is reached. My problem is that no matter what I specify for a quota, the system only will record 5GB before it starts to overwrite the older video. If I don't specify the quota feature, the system will record and save data until the disk is filled. If I enable a quota (25000 MB for example) and there is more than 5GB of video data saved, the excess over 5GB will be deleted.
Has anyone seen this kind of problem? Is the diskspace quota feature actually working for anyone?
Thanks in advance for helpful replies.

Have you tried un-installing and re-installing the Camera utility ?
Do you have the latest firmware installed on your Camera ?
Recordings can be scheduled and you can set disk quotas and many other parameters -
Disk Allocation for Each Camera Recording :
Total Disk Space is the total amount of storage space on your PC’s hard drive.
Available Disk Space is the total amount of remaining storage space on your PC’s hard drive.
Enable Diskspace Limitation if you want to limit the amount of disk space used by each Camera, check the box, then fill in the fields below.
Maximum allowed space per camera, Enter the maximum allowed space per camera in MB. The default is 1000 MB...I would suggest you to try 15GB and see how it goes with 15GB of Video on disk...See if it is still recording only 5GB of Video...
When allowed space is full Select the action to take when the space limit is reached, either Overwrite earliest file (default), or Stop recording...

Action recordable CS SDK panel

Hello,
I'm trying to set up a demo project where a CS SDK panel triggered script leaves a trace in the Actions palette (i.e. is recordable).
I've been successfully building a regular, recordable script appearing in the Filter's menu following this pattern. My goal is to implement a complex UI in Flex, which passes to the script the needed parameters - one history status, action recordable.
Embedding a swf in the ScriptUI isn't viable, since the supported Flex SDK version is too old to my taste ;-)
So far I've:
1. put a test_PS.jsx file, containing the requested <javascriptresource> header in /Presets/Scripts/ - plus a test routine (simple blurring) waiting for a param and the needed controls to discriminate whether or not save the param into an ActionDescriptor.
2. made the extension to read that file and call the main() routine (via HostObject.eval()) passing the param. The blurring is executed, leaving a single step trace in the History palette. But...
Even if I make the Extension's call to main (passing the params) call in turn the very same script with:
var s2t = function (s) {return app.stringIDToTypeID (s)}
var d = new ActionDescriptor();
d.putString(s2t("message"), "Recordable Test Panel Action Settings");
d.putDouble(s2t("radius"), 10);
executeAction (s2t("UUID_string_TestPanel"), d, DialogModes.NO)
I can't by no means make it recordable - unless I manually select it in the Filter's menu (this way, it leaves a trace in the Action palette).
Any suggestion?
Thanks
Davide

Yes, already found solution myself.
Added clode property to Flex app window, and called event removing.
controller.detach();
Thanks for help Harbs.
tomaxxi
http://indisnip.wordpress.com/

Keeping getting an error with-in the App Store. Error 100 saying that my payment can't be received at the time. I updated to Mountain Lion to download the new Logic Pro X. Now left with now recording software and it's not letting me buy the new one.

Keeping getting an error with-in the App Store. Error 100 saying that my payment can't be received at the time. I updated to Mountain Lion to download the new Logic Pro X. Now left with now recording software and it's not letting me buy the new one.
iMac, OS X Mountain Lion (10.8.4), trying to get Logic Pro X

Hello jst84,
The following article may be helpful in getting your purchase to complete.
Mac App Store: "An unknown error occurred (100)" when purchasing
http://support.apple.com/kb/TS3637
Cheers,
Allen

CS6 stamp tool doesn't work with action / record ( tool record is enabled ) other tools works

CS6 stamp tool doesn't work with action / record ( tool record is enabled ) other tools works

At one time tool recording was not possible and if you install Adobe Scriptlistener Plug-in Adobe will disable tool recording its never an option.
I use and record actions all the time and was looking forward to tool recording when Adobe announced it. However I found what they delivered was of very limited value because of the restrictions. I do not care that Adobe disables tool recording on my machine.
The amount of data that gets reordered seems also vary between machines. I found that Action recorded on fast machine are not usable on slow machine. Fast machine recorder too much data.
Documents you use such action on must also have the same size and resolution as the document you recorded the action on. Quite a restriction.
You problem may also be foxed in CC 2014 sett here Photoshop CS6 - Recording the clone tool in an action gives incorrect results on replay.

Can Microsoft add a screen recording software in the next update

Apple has screen recording software on it when you get it. Can Microsoft do this to? It will promote more gamers to use it and more people who use Youtube to post videos.

Apple has a great screen capture software downloaded on the computer for you, completely free! To by that same screen capture software for
Windows is about thirty dollars. Microsoft add a free screen recorder in the next update. This will put
Microsoft up above Apple. Think about it. More gaming is done on Microsoft computers than on
Apples. This will promote even more people to use Microsoft
and will allow more gamers and people who have Youtube channels to use Microsoft computers. I want a safe screen capture software that is easy-to-use and reliable.

Recording Software Simulation using Epiphan VGA2USB

Hi,
Can someone help me with an answer for the below question:
I have one question : How can we Record Software Simulation in Assessment mode in the following scenario :
1.laptop 1 has Adobe Captivate installed and is the source recording machine
2.laptop 2 has the software for which the recording and simulation needs to be done but this does not have captivate.
3. We use Epiphan's VGA2USB device to perform screen capture from Laptop 2 to Laptop 1 using Epiphan Capture Tool software.
My Question is : How can we get the clicks done on Laptop 2 be recorded using Captivate on Laptop 1, so I can capture the recording in Assessment Mode.
Thanks
Raghu

Hi Raghu,
Firstly, we do not recommend to record a different machine using a remote client, as there could be issues with latency.
If both machines are in same domain/intranet, you can use the Remote Desktop Share and while recording choose an application to record from list as RDP Service, readjust the recording window and start capturing.
Captivate would capture the events from Application listed which in this case would be RDP, I have not personaly used VGA2USB, if it can recreate a similar scenario you can test that as well.
Thanks,
Anjaneai

Is Logic Pro the Best Audio Recording Software for Mac?

Couple questions. I do a lot of audio production and work currently. I use a gateway with Cubase, and its not bad, but I feel like I need something mroe high end.
I'm looking at the 17 inch Imac. Does anyone record using this computer? How's it sound? Is there any way to put in a new soundcard or something if i don't like the current one?
Secondly, is logic pro the most advanced and best audio recording software for the mac? Are there others as well?
I know about Pro Tools, but it seems like there isn't anything high end enough that is TOO high end.
Does the Pro version have superior mixing capabilties. I am primarily going to be micing a guitar amp and having a mixer run into a firewire port, and also using a preamp for my guitar direct into the computers USB.
Lastly, how are the mixing features on Logic Pro vs. Logic Express? I do a lot of post production mixing as well, and use VST plugins. Speaking of that, will it accomodate using a drum program like BFD through VST or Midi like Cubase will?
Thanks for your time guys.

Couple questions. I do a lot of audio production and
work currently. I use a gateway with Cubase, and its
not bad, but I feel like I need something mroe high
end.
Yes, you do indeed need sth more high end.
I'm looking at the 17 inch Imac. Does anyone record
using this computer? How's it sound? Is there any way
to put in a new soundcard or something if i don't
like the current one?
It's not an iMac, but a faithful PowerBook G4 that I am using. Apples Core Audio is awesome. Your sound, however, will depend on your interface.
Secondly, is logic pro the most advanced and best
audio recording software for the mac? Are there
others as well?
That's why we are here, and that's why you ended up in this forum as well
To me personally, Logic sounds warmer and bigger than any ProTools system I've ever heard. From what yopu described as the work you need to do, there is no comparable application. Logic also offers you many more features above and beyond what you currently need to do.
I know about Pro Tools, but it seems like there isn't
anything high end enough that is TOO high end.
Everybody is using PT, and you should maybe get a Light Edition version of it. However, as stated above, Logic offers by far more possibilities.
Does the Pro version have superior mixing
capabilties. I am primarily going to be micing a
guitar amp and having a mixer run into a firewire
port, and also using a preamp for my guitar direct
into the computers USB.
For your purpose, Logic does have superior mixing capabilities. In my humble opinion, only the popularity of PT made it become the choice of studios and engineers, but things are turning...
Lastly, how are the mixing features on Logic Pro vs.
Logic Express? I do a lot of post production mixing
as well, and use VST plugins. Speaking of that, will
it accomodate using a drum program like BFD through
VST or Midi like Cubase will?
If you do post production mixing, forget about Logic Express altogether and go for Logic Pro. LP will accomodate tons of plug-ins, and it comes with a bunch of great one's as well!
The format for the plug-ins is called A(udio) U(nit) and works flawlessly. Many VST plug-ins are also available in AU format and the development of those is moving fast forward.
In other words, yes, you will be able to use BFD in Logic by means of the AU format.
Thanks for your time guys.
You're welcome.

Best Screen Recording Software for Mac?

Looking for recommendations on a good computer screen recording program, as I'm trying to make a tutorial video, and need to be able to record what I am doing on my computer screen.
Would prefer free, but don't mind paying a bit - quality is most important. Any advice would be appreciated - thanks!

Japhydean wrote:
Best Screen Recording Software for Mac? ..
2nd vote:
without doubt - Screenflow
why ?
because, it is not only a 'grabber', but it includes an 'editor', drop-dead-simple as iMovie, which includes many features ESPECIALLY made for tutorials - e.g. you can zoom-in after recording without quality-loss, you can change cursor-size, highlite, 'print' pressed keys on screen, add a pic-in-pic (if you like your face in your tuts ) ..
side-note: screen-grabs are off the standards, iM or FinalCut/express support! so, a built-in editor is a ++ ! (the exports/uploads from a SF-project are superb!)
not cheap, but worth every cent!

Recording Software for WVC210G ip camera

Hi all,
I have an issue with finding the Camera Recording software.
we purchased the ip camera WVC210G and was searching for the Camera Recording software 'L-VM300-04' for viewing 4 Cameras.
But from Cisco and Distributor we came to know that the product has the EOL(End of Life)
So it would be great if anybody can suggest the equivalent software for the same
Regards,
Sooraj

Hi Sooraj,
Thank you for posting. The Video Monitoring Software is developed by Nuuo: http://www.nuuo.com/
I believe that they have a similar product to L-VM300-04 and you can license the software from them if you can no longer obtain a license for the Cisco product.

I have an old mini running os x 10.4 . im about to upgrade to 10.6 (the highest this dinosaur will upgrade to) but i have a ton of music recording software installed and need to know if it will affect it . please help ? any of it

i have an old mini running os x 10.4 . i'm about to upgrade to 10.6 but have a ton of music and recording software installed and need to know if it will affect any thing i have installed . does newer garageband work with older gband files ?please help ??

Sorry about that, yes, 10.5 and 10.6 on Intel can run Firefox 4.
Here's the process to roll back:
First, I recommend backing up your Firefox settings in case something goes wrong. See [https://support.mozilla.com/en-US/kb/Backing+up+your+information Backing up your information]. (You can copy your entire Firefox profile folder somewhere outside of the Mozilla folder.)
Next, download and save Firefox 3.6 to your desktop for future installation. http://www.mozilla.com/firefox/all-older
You could install Firefox 3.6 over Firefox 4 (many have reported success) or you could uninstall Firefox first. If you uninstall, do not remove your personal data and settings, just the program.
Firefox 3.6 should pick up where you left off. If there are serious issues, please post back with details.
Note: I haven't actually tried this myself!

Can we download Action Voip Software on Mac Book Pro?

Can we download Action Voip Software on Mac Book Pro?

You can download absolutely anything to the MBP, but if you want to run Action VOIP on it, you'll have to install MS Windows to run it in.

How do you do action recording in Photoshop Elements like you can in regular photoshop?

How do you do action recording in Photoshop Elements like you can in regular photoshop?
One of my clients is a club promoter and they would like to put their logo on the bottom left of their photos from their events. Usually I can do this by opening the logo (which has like 50% opacity), copying the logo, recording an action set, pasting the logo i copied to memory into the photo, resize the photo and export and close the photo, save the action set and then just batch- automate and choose all currently opened images to run the action on.
*I mentioned the 50% opacity because I want to put the logo on the photos but not totally hide what's underneath the logo.
How do I do the same with photoshop elements?
-Line

Just another option that may work for you there are a number of relatively cheap and a couple of freeware programs that are listed here, there are many others I am sure.
http://shareme.com/showall/Batch-Watermark.html
I have not used any of these so I can not recommend of course but most have trial versions.
Good Luck,
Don

Actions recorder not recording

Hi, I open hundreds of photos a day in photoshop (CS-3) in order to extract embedded caption information using the commands: file-file info-copy, paste (to a Word document or InDesign). I tried the action recorder but it won't record those steps. It would be nice to have an action command that does this. A lot of our photos end up in Flickr and I notice that Flickr uses a caption extraction program b/c when we post photos there, it automatically strips out the caption info and posts it in a window below the photo. Any help much appreciated!

[email protected] wrote:
> What about ONLY doing things within photoshop, IOW, file-file info-select all, copy?
I don't know of a way to copy text into the clipboard, only image data. But
somebody else may have figured something out (via textItem.contents, perhaps).
-X

MTM Is possible make an exploration test with action recording on lab center machine (using hyper-v)?

Hi everybody.
I am getting crazy with Lab center. I cant record an exploration test if i try to make it on Lab center's remote machine.
I have follow msdn help. And if i make it on local machine it works fine.
Test agent is configured correctly like "Interactive process".
On lab center, my Lab status is "Ready".
Connecting with lab center to target machine, Test Agent status is "Online" before run exploration test.
While exploration test is running, Test Agent status is "Running Tests".
But when I make click on "Create Test case" there isn't any information of desktop click events from target machine.
By other hand, when i finish there are attachments file with info from target machine. As you can see on the flowing pick:
And this make me come here to answers: Is possible make an exploration test with action recording on lab center machine (using hyper-v)?

Hi everybody.
I am getting crazy with Lab center. I cant record an exploration test if i try to make it on Lab center's remote machine. I am using standard
lab environment.
I have follow msdn help. And if i make it on local machine it works fine.
Test agent is configured correctly like "Interactive process".
On lab center, my Lab status is "Ready".
Connecting with lab center to target machine, Test Agent status is "Online" before run exploration test.
While exploration test is running, Test Agent status is "Running Tests".
But when I make click on "Create Test case" there isn't any information of desktop click events from target machine.
By other hand, when i finish there are attachments file with info from target machine. As you can see on the flowing pick:
(sorry i cant upload the pick until Microsoft verify my account)
And this make me come here to answers: Is possible make an exploration test with action recording on lab center machine (using hyper-v)?

Action recording software?

Similar Messages

Maybe you are looking for