Action shots problems

I was given DV-avi file. The final product will be viewed on computer monitors and also on TV sets.
This avi file plays fine when viewed on my computer. To finalize the project, I used automatic transcoding, and I created a folder and also an image.
When I view the image with VLC media player, whenever there is fast panning or a lot of movement, I can detect some annoying horizontal lines, jiggling slightly right and left. Whenever there is no fast movement, which is most of the time, it is perfect. The problem is with these few areas.
On the other hand, when I view the files in the folder with PowerDVD, it is not as bad.
My question is: is it better to remedy this problem in Premiere or in Encore (I have version CS3)
I checked the forums, I tried de-interlacing in Premiere, progressive reanscoding in Encore, all sorts of combinations. I am not happy with the results, there is always something that isn`t right.
I will appreciate your help and advise, to be able to solve this problem.
Thanking you in advance.

Christine,
The "fast motion" aspect can be addressed in either location: PP, or Encore. You will want to do a manual Transcode setting for that/those Asset(s). This will then probably bring in bit-budgeting for the full Project.
There are several good threads of bit-budgeting, with links to bit-budgeting calculators and suggestions on this forum. I am not sure that there is as much useful info on the PP forums, but there might be.
Look closely for comments by Neil, Ruud and Jeff. They each usually link to other sources of info, that really become relevent, when you have to address individual Assets. It's not a really easy task, but they all go a long way to simplify the task.
Jeff's book, "Focal Easy Guide to Encore2," covers some of the aspects of individual Asset Transcodes. Do not let the "Encore2" bit bother you. Most is the same for all versions.
Good luck,
Hunt

Similar Messages

Trouble with low light action shots on 70d

I just went from a T3i to a 70D. I seem to have trouble with action shots in low light situations, any suggestions on setting...
Solved!
Go to Solution.

"I just went from a T3i to a 70D"
... and didn't upgrade your lens inventory? Although the 70D will be better in most cases compared to a Rebel T3i, it is the lens. It is always the lens.
EOS 1Ds Mk III, EOS 1D Mk IV EF 50mm f1.2 L, EF 24-70mm f2.8 L,
EF 70-200mm f2.8 L IS II, Sigma 120-300mm f2.8 EX APO
Photoshop CS6, ACR 8.7, Lightroom 5.7

G15 action shot

I have recently purchased a G15 after several year of using G7. I am surprise to find a very limited scene modes on my G15. I'm I missing something or have I make a mistake. I do a lot of outdoor shooting at different landscape, views and action shots which the G7 made very simple. Have I made a mistake with G15?
Your comment are appreciated. Thank you

I'd guess that Canon decided that buyers would be photographers rather than picture takers. As such they'd know what setting do the best job in every situation. The G7 used a mode dial to access programmed settings for each of the things you've named such as scene mode, sport mode, night etc. As such there was a built in set of settings that used the meter reading to decide what ISO, shutter speed & aperture MIGHT give you a good photo. For those who've taken the time to learn the basic rules of photography doing the same or a better job on determining which settings to use is relatively simple, & they'll just set the camera up to get the shot & if it's off a bit they'll reset & shoot again.
Fortunately it's easy to see results thanks to digital cameras & LCD's so now that you've spent the money take a bit of time to learn the basics & practice them learning & advancing as you go. For action you use the Tv mode (to set the Time Value or Shutter Speed). You need to pick a shutter speed setting that's high enough to freeze the action, but unlike the built in program of the G7 you pick a more perfectly matched shutter speed. For Landscapes you usually use Av mode (aperture value) & learn what different settings do.
No matter which camera you buy it's going to use the same combination of things to produce good photos, and that combination matches the ISO, the shutter speed & correct aperture to do it. No magic, just the rules that control an exposure, and more advanced cameras allow the user the control over those things.
"A skill is developed through constant practice with a passion to improve, not bought."

Action Shot

Is there any photo/camera app for Iphone 4 that does the same Action Shot that Samsung Galaxy s does?

The only things that can run on an iPhone come from the App store... search there.
Here's a good app search site... http://appshopper.com/
And here's an Action Shot search from there... http://appshopper.com/search/?search=action+shot

Lumia 928 camera - Action shot

I'm trying to figure out how to do something like what I see here with my 928. I don't have an 'Action Shot' option, and can't seem to find any answer anywhere.
http://www.youtube.com/watch?v=YpNxk_0m5ck

Action shot is part of the new Smart Camera application that is included with the 925 but will be made available for other Lumia WP 8 devices later this summer.

I have a Rebel T3i zoom for action shots??

I received this camera last year for Christmas. I wanted it to take action shots of my son playing soccer and my daughter horseback riding. It has the lense it came with and I'm wondering if I need to upgrade my lense to get great pictures. I can't seem to zoom in when it's set to action mode is that normal? I'm VERY new to photography. I've read through the users manual but not getting anywhere fast. If it's the lense then which lense would be sufficient for what I would like to do?

We can't tell you much without knowing what lens you've been using but if you want to shoot day time sports there are a few zooms which can do a good to great job but night sports is a very different thing. Be prepared to dig deep if you're really serious but if you can live with good vs great image quality (No matter which way you go there is a learning curve so allow some time to perfect your technique). On the lower end I'd recommend researching the Tamron 70-300 VC & Canon 70-300 IS. A better lens but also shorter reach wise is the Canon 70-200 f4 L or better yet (& more $) is the 70-200 f4 L IS and even more expensive are the 70-300 L IS & 100-400 L IS but it may be a bit long at the wide end for the soccer.
"A skill is developed through constant practice with a passion to improve, not bought."

WebDynPro ABAP Scrren Shot Problem

Dear All,
I have a scenario to upload the screen shot in .Doc format in the database table in webdynpro application and the same senario like i need to download the screenshot in .DOC Format in the System.
Please let me know how can I acheive this task.
Thanks&regards,
Aditya.

Hi
Try to use thid below code I think it will solve your problem.
Code for File download in action method
DATA lr_conv   TYPE REF TO cl_abap_conv_out_ce.
DATA lv_data   TYPE        string.
DATA lv_xfile TYPE        xstring.
lv_data = 'Example text, which will be opened in MS Word.'.
cl_abap_conv_out_ce=>create( RECEIVING conv = lr_conv ).
lr_conv->convert( EXPORTING data   = lv_data
                    IMPORTING buffer = lv_xfile ).
cl_wd_runtime_services=>attach_file_to_response(
                     EXPORTING i_filename = 'wd4a.doc'
                               i_content   = lv_xfile
                               i_mime_type = u2018applicaton/mswordu2019)
Thanks & Regards,
Ravi Kiran.

Action script problem for audio player

i have made a introduction with a audio and controller. I am facing one problem. I will like to play as soon as some one enter the page but it does not.
My action script is pasted below and kindly advise me for any changes that can be done
var soundReq:URLRequest = new URLRequest("Sonu Nigam_Alka Yagnik - Suraj Hua M.mp3");
var sound:Sound = new Sound();
var soundControl:SoundChannel = new SoundChannel();
var volumeControl:SoundTransform = new SoundTransform();
var resumeTime:Number = 0;
sound.load(soundReq); sound.addEventListener(Event.COMPLETE, onComplete);
up_btn.addEventListener(MouseEvent.CLICK, increaseVolume);
down_btn.addEventListener(MouseEvent.CLICK, decreaseVolume);
function onComplete(event:Event):void
play_btn.addEventListener(MouseEvent.CLICK, playSound);
stop_btn.addEventListener(MouseEvent.CLICK, stopSound);
function playSound(event:MouseEvent):void
{ soundControl = sound.play(resumeTime);
pause_btn.visible = true;
pause_btn.addEventListener(MouseEvent.CLICK, pauseSound);
play_btn.visible = false; play_btn.removeEventListener(MouseEvent.CLICK, playSound);
function pauseSound(event:MouseEvent):void {
resumeTime = soundControl.position;
soundControl.stop();
play_btn.visible = true;
play_btn.addEventListener(MouseEvent.CLICK, playSound);
pause_btn.visible = false;
pause_btn.removeEventListener(MouseEvent.CLICK, pauseSound);
function stopSound(event:MouseEvent):void {
soundControl.stop();
play_btn.visible = true;
play_btn.addEventListener(MouseEvent.CLICK, playSound);
pause_btn.visible = false; pause_btn.removeEventListener(MouseEvent.CLICK, pauseSound);
function increaseVolume(event:MouseEvent):void {
volumeControl.volume += .5;
soundControl.soundTransform = volumeControl;
function decreaseVolume(event:MouseEvent):void {
volumeControl.volume -= .5;
soundControl.soundTransform = volumeControl;
pause_btn.visible = false;

i am having big problem with the coding below with the sound. As it we enter the site, the music auto start very loud which is not good at all for the ear drums. How do i adjust that?
www.hitenkajal.co.uk
var soundReq:URLRequest = new URLRequest("10 Kabhi Alvida Naa Kehna_0.mp3");
var sound:Sound = new Sound();
var soundControl:SoundChannel = new SoundChannel();
var volumeControl:SoundTransform = new SoundTransform();
var resumeTime:Number = 0;
sound.load(soundReq);
sound.addEventListener(Event.COMPLETE, onComplete);
up_btn.addEventListener(MouseEvent.CLICK, increaseVolume);
down_btn.addEventListener(MouseEvent.CLICK, decreaseVolume);
function onComplete(event:Event):void
play_btn.addEventListener(MouseEvent.CLICK, playSound);
stop_btn.addEventListener(MouseEvent.CLICK, stopSound);
function playSound(event:MouseEvent):void
soundControl = sound.play(resumeTime);
pause_btn.visible = true;
pause_btn.addEventListener(MouseEvent.CLICK, pauseSound);
play_btn.visible = false;
play_btn.removeEventListener(MouseEvent.CLICK, playSound);
function pauseSound(event:MouseEvent):void
resumeTime = soundControl.position;
soundControl.stop();
play_btn.visible = true;
play_btn.addEventListener(MouseEvent.CLICK, playSound);
pause_btn.visible = false;
pause_btn.removeEventListener(MouseEvent.CLICK, pauseSound);
function stopSound(event:MouseEvent):void
soundControl.stop();
play_btn.visible = true;
play_btn.addEventListener(MouseEvent.CLICK, playSound);
pause_btn.visible = false;
pause_btn.removeEventListener(MouseEvent.CLICK, pauseSound);
function increaseVolume(event:MouseEvent):void
volumeControl.volume = 1;
soundControl.soundTransform = volumeControl;
function decreaseVolume(event:MouseEvent):void
volumeControl.volume = 0.1;
soundControl.soundTransform = volumeControl;
pause_btn.visible = false;
playSound(null);

Corrective actions setup problem

Hi guys!
I have problem with setup corrective action for listener avaliability when status is down and action doesnt work at all. I have create template Listener_stuff with metric trasholds for Response Time (msec) and Status is down. Other details for template are:
Corrective Actions
Critical LSNRCTL START LISTENER_TESTDB2
Allow only one corrective action for this metric to run at any given time (checked)
Advanced Threshold Settings
Critical Threshold: Down
Number of Occurrences: 1
Collection Schedule: Every 1 Minute
And corrective action details for listener are:
Name: LSNRCTL START LISTENER_TESTDB2
Description: lsnrctl start LISTENER_TESTDB2
Target Type: Listener
and *'OS Command' Corrective Action* details are:
Command Type: Single Operation
* Command: lsnrctl start LISTENER_TESTDB2
I have saved credentials for that specific listener and host where listener resides. Also i have created notification rule when specific listener is down and that work ok.
Other details are:
Grid control OMS is version 10.2.0.3 , and agent version on test host is 10.2.0.4.
Host has Red Hat Linux EL 4 OS
Please help me with this, or send me some links with more detailed corrective action examples.....
Thank you!
Edited by: rootsman on Jan 11, 2012 1:21 AM

And this is what i receive related to corrective action job:
Corrective Action=LSNRCTL START LISTENER_TESTDB2
Created By=SYSMAN
Task Type=Host Command
Target Name=LISTENER_TESTDB2_testdb.domain.com
Target Type=Listener
Timestamp=Jan 11, 2012 12:52:30 PM CET
Status=Failed
Metric=Status
Metric Value=0
Severity=Critical
Rule Name=Listener_test
Rule Owner=TEST
Step Output=
Command:Output Log
LSNRCTL for Linux: Version 11.2.0.3.0 - Production on 11-JAN-2012 12:52:29
Copyright (c) 1991, 2011, Oracle. All rights reserved.
Starting /db/agent10g/bin/tnslsnr: please wait...
TNS-12545: Connect failed because target host or object does not exist
TNS-12560: TNS:protocol adapter error
TNS-00515: Connect failed because target host or object does not exist
Linux Error: 2: No such file or directory
~~~End Step Output/Error Log~~~

Screen Shot Problem (No Longer Working)

For some reason, I suddenly cannot take a screen shot! I'm using Snow Leopard on a MacBook Pro, and I keep trying to take a screen capture shot of a website for a friend, but when I hit optionshift3 in both Firefox and Safari, nothing happens! I even restarted and the problem is persisting. Is there some way to fix this? I just can't figure out what I could have done to make this function not work any longer.

Command + Shift + 3 for entire screen
Command + Shift + 4 for selected area
Go to Finder > Help menu. Type in "shortcuts for taking picture of screen" for more information.
cornelius

Infotype 0000 Actions overview problem

Hi mates,
we are upgrading DEV system from 4.6C to 6.0.
After upgrading the system we cannot see data on overview screen on infotype 0000, and on all other ITs we can see data.
Could you tell me what could be the problem with IT0000?
Thanks
Romano

Hi
This problem may have two possible reason:
1)IT0302.You may need to check your entries in T529A, as you might have
activated this infotype (0302 additional actions)and therefore all
completed actions saved in infotype 0000 (actions)also need to be logged
in infotype 0302.
if this IT has been activated y mistake then just deactivate it, if not
you will need to running report 'RPUEVSUP'.(please check the documenta-
tion of this report before hand).
2)If you do not use IT 0302, you will need to check your setting in
table T77S0.
If the switch ADMIN EVSUP has value '1' In order to deactivate this
functionality 'Additional actions' again, just set the value for this
swith ADMIN EVSUP back to 'blank' in table T77S0.
Group Sem.abbr. Value abbr
ADMIN EVSUP ' '
After deactivating this option, the infotype 0000 records should be
diplayed again on the overview screen.
Regards
Ramana

GetURL action scritp problem

I have a big problem with Macromedia Flash MX: primitiv action script associated with button (on (release) {
getURL("page.html","framename");
is not passed to frame "framename" of frameset, but open new window.
On 10.4.6 and older this work perfect, but on 10.4.7. is wron on all browswrs (Safari, IE, Firefox)
Please, help me somebody.
Maybe is problem with java implementation...some updates...?

this should work... but using frame is...anyway...
try looking for allowScriptAccess in your embed and object
tag and set it to "always" .. it help sometime when using getURL...
other then this you could call a javascript function witch
change the frame current src...

Bug in form action configuration: problem with multifield

I’ve created a new page in content/geometrixx-outdoors/en/ and added a form component (from the foundation components).
I configure the form’s start element with the action type ‘Mail’ and add a mail address in the Mailto field (xtype="multifield") in the action configuration area.
I save the configuration and see the start node in the JCR having a property ‘mailto’ with the specified value (as expected).
However, if I open the start element’s configuration dialog again and try to change the mail address (in Mailto) or add another mail address (in Mailto, CC or BCC), clicking the dialog’s OK button doesn’t close the dialog and save the values anymore.
Only after I removw a multifield element, I’m able to save the values by clicking the OK button.
(Tested with FF 11 and Chrome 18.)
I'de like to see this problem fixed.
Can I file this problem description as bug anywhere?

I forgott to mention that I've already installed CQ5.5.
Unfortunately, I see this bug not fixed yet.
Note: it's the multifield (xtype="multifield") that's bothering me.
This has nothing to do with the radio or checkbox field. There's no default selection possible.

Elements 11 - Merge & Align Action Shots

Can Elements 11 Merge & Align 4 action photos into a single photo? I want to merge 4 continue shots of a skaterboarder into a single photo with the rider appearng in the final photo 4x.

Your best way to do this is to read this article:
<http://help.adobe.com/en_US/photoshop/cs/using/WSfd1234e1c4b69f30ea53e41001031ab64-75e8a.h tml>
Good luck.

BIZTALK bts action mapping problem with Message Schemas for the Composite Operation

Hi,
I have a message schema made with the composite operation.
now, I have re-deployed my biztalk project and in the send port for this Oracle composite message the SOAP action header hasn't updated the correct action.
now I tried several verations for this soap action mapping and this is what I got:
><BtsActionMapping xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" >xmlns:xsd="http://www.w3.org/2001/XMLSchema">
> <Operation Name="Select" Action="http://Microsoft.LobServices.OracleDB/2007/03/CompositeOperation" />
> <Operation Name="SQLEXECUTE" Action="http://Microsoft.LobServices.OracleDB/2007/03/CompositeOperation" />
> </BtsActionMapping>
Now as you can see the Composite schema has 2 operations one is from an Oracle VIEW and the second one is an Oracle SQL querry.
please if someone could assist me with this issue?
Message Schemas for the Composite Operation
Message Schemas for the Composite Operation

For Composite Operations you don't use the Action Mapping Xml for both the SQL Server and Oracle bindings.
The Action for Oracle Composite Operations is:
http://Microsoft.LobServices.OracleDB/2007/03/CompositeOperation
by itself. No Xml or anything.

Action shots problems

Similar Messages

Maybe you are looking for