Action stop after 30 min run
I run a simple shadow action, but after it is running for 30 min the Photoshop just crashed and there is nothing in the log file. The action in this period adjust 2298 items. Is the any limitation or what can cause this crash?
From the windows I get this log:
Problem signature:
Problem Event Name: APPCRASH
Application Name: Photoshop.exe
Application Version: 15.0.0.58
Application Timestamp: 536b438e
Fault Module Name: Photoshop.exe
Fault Module Version: 15.0.0.58
Fault Module Timestamp: 536b438e
Exception Code: c0000005
Exception Offset: 00000000016c5f55
OS Version: 6.1.7601.2.1.0.256.48
Locale ID: 1038
Additional Information 1: 7968
Additional Information 2: 79680a764f3c0cc390ff0ee35580c182
Additional Information 3: 241e
Additional Information 4: 241e62dc4664a7b2d598aeb643d7ae3d
Read our privacy statement online:
http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409
If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt
Looks like cc 2014 Photoshop.exe crashed. However you state its a simple action that it was running over 30 minuets. You did not post the action of state wither you were batching the action. However you stated that 2298 items were updated. I do not know what you classify an item to be. If by item you mean image file and your batching the action. If the Action adds documents to Photoshop open documents and does not close then before ending the number of document open increases with each image file processed. After processing 2298 files the could be a countless number of open documents consuming RAM and scratch space your machine may have simply ran out of resources and Photoshop crashed which freed up the consumed resources.
Similar Messages
-
Why does action stop after creating blending option
When I create a blending option on a layer, then run the action, the action takes effect, but leaves the blender dialog box open. I don't have a stop command in the dialog. See image. I tried adding some other commands below, like select new layer, etc., but it stops before them anyway.
I think it's possible an action can stop and prompt under some conditions where it is being run on a different type of image than it was created with. For example, a Curves operation recorded on an RGB image can be seen to stop and prompt on a grayscale image.
If you'd like to post a copy of the action I'll be happy to run it and see if I get the same results.
-Noel -
How to collapse action steps after running..?
As mentioned in the subject line, does anyone know a way of collapsing the (sometimes many) steps that open up underneath an action after it is run? It becomes quite laborious to scroll down and down...and down...longer and longer, to find the action I want after a few of them have been run. I am aware I can click the small arrow next to the action to close it but is there a way of including that step in the actual action or automating it somehow?
Thanks all.
BradFirstly...thankyou for your continued interest/suggestion/assistance; it is much appreciated.
I am working as a portrait retoucher for a high volume studio where speed is of the essence. The action basically, flattens the image, creates a copy/duplicates layer, selects dodge tool, selects a custom brush for dodging...then there is a stop inserted so that I can paint/dodge the eyes to brighten them. Then when I click play and the action resumes it creates a layer mask, selects the brush tool and selects a custom brush for masking out areas of the previously dodged layer. - Hope all of that makes a little sense.
That isn't the first time scripting has been suggested but to be honest I don't know anything about that - is it worth investing some time to explore that avenue?
If I switch to button mode, will the action still pause for the stop or will it just run from start to finish? I have used configurator to create a custom toolbar that has buttons to run the above mentioned action (and a few others) but when I run it from here (configurator) the action does not pause or recognise the stop; it just runs the action from start to finish - wish there was a way to fix that too!
Not sure if a workaround or solution even exists for these issues but I thankyou again for your time regardless. -
Resume Batch Process After Action Stop
I have an action in Photoshop that includes two different stops to allow the user to make adjustments to the image. I would like to run this action on multiple files, but the whole batch process stops when the action stops.
How can I make Photoshop (and/or bridge) resume processing the remaining images after the user completes the adjustments?Mike:
As you now know, this workflow cannot be automated due to the embedded STOPS:
* Open an image fle
* STOP
- Levels
- Mask
* STOP
- Tweak background
* Save as .psd
* Flatten
* Save as .jpg
* Close
* [repeat until all image files processe]
...but consider this possibility:
Open all (or some) candidate image files via Bridge, File > Open, Drag/Drop into PS Window. Then on each:
* Levels
* Mask
* Tweak background
* Minimize window when done
* Go onto the next open file
When all image windows minimized (signfying completion of tweaking), play a new action (e.g., "Save files") that would consist of two Automate > Batch steps:
* Batch step 1: play [new] action "Save as .psd"
Source: open images
- save files in .psd format in a folder of choice
* Batch step 2: play [new] action "Open .psd, flatten and save as .jpg"
Source: folder of just saved .psd files
- flatten each and save in .jpg format in a folder of choice
Kind of a bass ackwards approach, but once setup was complete it would offer a 1-click solution to batch saving the files in the format and folders desired. -
Mac mini running very slow after downloading yosemite
Why is my mac mini (mid 2011) 2.5GHz Intel Core i5 now running very slow in all aspects after upgrading to OS X yosemite 10.10.1?
Here is a recent EtreCheck Report
Problem description:
Mac mini running very slow after upgrading to yosemite
EtreCheck version: 2.1.6 (109)
Report generated January 21, 2015 at 2:56:48 PM PST
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Support] links for help with non-Apple products.
Click the [Details] links for more information about that line.
Click the [Adware] links for help removing adware.
Hardware Information: ℹ️
Mac mini (Mid 2011) (Technical Specifications)
Mac mini - model: Macmini5,2
1 2.5 GHz Intel Core i5 CPU: 2-core
4 GB RAM Upgradeable
BANK 0/DIMM0
2 GB DDR3 1333 MHz ok
BANK 1/DIMM0
2 GB DDR3 1333 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
AMD Radeon HD 6630M - VRAM: 256 MB
Cinema HD 1920 x 1200
System Software: ℹ️
OS X 10.10.1 (14B25) - Time since boot: 15 days 18:52:31
Disk Information: ℹ️
Hitachi HTS545050B9A302 disk0 : (500.11 GB)
EFI (disk0s1) <not mounted> : 210 MB
Macintosh HD (disk0s2) / : 499.25 GB (235.76 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
USB Information: ℹ️
Apple Computer, Inc. Apple Cinema HD Display
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
Apple, Inc. Keyboard Hub
Apple Inc. Apple Keyboard
Primax Electronics Apple Optical USB Mouse
Apple Computer, Inc. IR Receiver
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
Mac App Store and identified developers
Problem System Launch Agents: ℹ️
[killed] com.apple.CallHistoryPluginHelper.plist
[killed] com.apple.CallHistorySyncHelper.plist
[killed] com.apple.cloudd.plist
[killed] com.apple.cmfsyncagent.plist
[killed] com.apple.coreservices.appleid.authentication.plist
[killed] com.apple.EscrowSecurityAlert.plist
[killed] com.apple.icloud.fmfd.plist
[killed] com.apple.Maps.pushdaemon.plist
[killed] com.apple.nsurlsessiond.plist
[killed] com.apple.printtool.agent.plist
[killed] com.apple.rcd.plist
[killed] com.apple.sbd.plist
[killed] com.apple.telephonyutilities.callservicesd.plist
[killed] com.apple.warmd_agent.plist
[killed] com.apple.xpc.loginitemregisterd.plist
15 processes killed due to memory pressure
Problem System Launch Daemons: ℹ️
[killed] com.apple.AssetCacheLocatorService.plist
[killed] com.apple.awdd.plist
[killed] com.apple.ctkd.plist
[killed] com.apple.emond.aslmanager.plist
[killed] com.apple.icloud.findmydeviced.plist
[killed] com.apple.ifdreader.plist
[killed] com.apple.installd.plist
[killed] com.apple.nehelper.plist
[killed] com.apple.nsurlsessiond.plist
[killed] com.apple.periodic-daily.plist
[killed] com.apple.periodic-monthly.plist
[killed] com.apple.periodic-weekly.plist
[killed] com.apple.softwareupdate_download_service.plist
[killed] com.apple.tccd.system.plist
[killed] com.apple.wdhelper.plist
[killed] com.apple.xpc.smd.plist
16 processes killed due to memory pressure
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist [Support]
[loaded] com.microsoft.office.licensing.helper.plist [Support]
User Launch Agents: ℹ️
[loaded] com.adobe.ARM.[...].plist [Support]
[running] com.spotify.webhelper.plist [Support]
User Login Items: ℹ️
iTunesHelper UNKNOWN (missing value)
AdobeResourceSynchronizer Application Hidden (/Applications/Adobe Reader.app/Contents/Support/AdobeResourceSynchronizer.app)
CDSBupd Application (/Applications/ConceptDraw Office 2/Solution Browser.app/Contents/MacOS/CDSBupd.app)
Internet Plug-ins: ℹ️
Flip4Mac WMV Plugin: Version: 3.1.0.24 - SDK 10.8 [Support]
FlashPlayer-10.6: Version: 16.0.0.257 - SDK 10.6 [Support]
Default Browser: Version: 600 - SDK 10.10
AdobePDFViewerNPAPI: Version: 11.0.09 - SDK 10.6 [Support]
AdobePDFViewer: Version: 11.0.09 - SDK 10.6 [Support]
Flash Player: Version: 16.0.0.257 - SDK 10.6 [Support]
QuickTime Plugin: Version: 7.7.3
SharePointBrowserPlugin: Version: 14.4.5 - SDK 10.6 [Support]
JavaAppletPlugin: Version: 15.0.0 - SDK 10.10 Check version
3rd Party Preference Panes: ℹ️
Flash Player [Support]
Flip4Mac WMV [Support]
GoPro [Support]
Time Machine: ℹ️
Time Machine not configured!
Top Processes by CPU: ℹ️
27% mds
12% WindowServer
1% discoveryd
1% Microsoft Word
1% Mail
Top Processes by Memory: ℹ️
253 MB discoveryd
64 MB Mail
52 MB Safari
43 MB iTunes
43 MB Preview
Virtual Memory Information: ℹ️
42 MB Free RAM
768 MB Active RAM
744 MB Inactive RAM
993 MB Wired RAM
104.37 GB Page-ins
4.15 GB Page-outsMore memory will help:
4.15 GB Page-outs
16 processes killed due to memory pressure
15 processes killed due to memory pressure -
I would like to set a capture time so it stops after 90 mins
i would like to set a capture time so it stops after 90 mins so if I am not there it stops recording is this possible?
Thanks. I had tried that, but was still having problems. Then I realized that I was using three addresses on both devices. Once I changed it to only one email on one iPad and a different email on the other, it worked great. Your message encouraged me to dig deeper and think differently. It worked. Thanks again!
-
When using my new nano 7 with nike+, my music stops after the 30 minute voice alert even though I have set my run/workout for over 30 minutes. It also cancels/deletes that run/workout. This has happened several times. How can I keep this from happening?
If possible I would arrange for a good service center to go over it. Hopefully they have a variety of parts in stock. They can test and verify all is working. The previous attempts are based on guesses by the person at the other end of the phone without diagnostic tests to assess the culprit. It is extremely unlikely for a webcam to fail & for it & a Mic to fail together should be an indicator to a good technician it is something else. EG Motherboard
Take it to a servicing dealer and wait for it.
T520 Model 4239 Intel(R) Core(TM) i7-2860QM CPU @ 2.50GHz
Intel Sandy Bridge & Nvidia NVS 4200M graphics Intel N 6300 Wi-Fi adapter
Windows 7 Home Prem - 64bit w/8GB DDR3 -
Mac Mini Running Slow After Installing Yosemite
After downloading the new update my mid 2011 mac mini runs super slow,Its slow when booting up, selecting an application, surfing the internet, etc
Hardware Information: ℹ️
Mac mini (Mid 2011) (Technical Specifications)
Mac mini - model: Macmini5,1
1 2.3 GHz Intel Core i5 CPU: 2-core
2 GB RAM Upgradeable
BANK 0/DIMM0
1 GB DDR3 1333 MHz ok
BANK 1/DIMM0
1 GB DDR3 1333 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
Intel HD Graphics 3000 - VRAM: 288 MB
2367 1920 x 1080 @ 60 Hz
System Software: ℹ️
OS X 10.10.1 (14B25) - Time since boot: 0:27:42
Disk Information: ℹ️
TOSHIBA MK5065GSXF disk0 : (500.11 GB)
EFI (disk0s1) <not mounted> : 210 MB
Macintosh HD (disk0s2) / : 499.25 GB (440.49 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
USB Information: ℹ️
Apple Inc. MacBook Air SuperDrive
Apple Computer, Inc. IR Receiver
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/System/Library/Extensions
[not loaded] com.Belcarra.iokit.USBLAN_netpart (3.1.1 - SDK 10.6) [Support]
[not loaded] com.Belcarra.iokit.USBLAN_usbpart (3.1.1 - SDK 10.6) [Support]
[not loaded] com.RemoteControl.USBLAN.usbpart (3.1.1 - SDK 10.7) [Support]
/System/Library/Extensions/2.2.0/Belcarra.USBLAN_netpart.kext/Contents/Plug-Ins
[not loaded] com.belcarra.iokit.netpart.panther (1.6.3) [Support]
/System/Library/Extensions/2.2.0/Belcarra.USBLAN_usbpart.kext/Contents/Plug-Ins
[not loaded] com.belcarra.iokit.usbpart.panther (1.6.3) [Support]
/System/Library/Extensions/2.2.0/RemoteControl.USBLAN_usbpart.kext/Contents/Plu g-Ins
[not loaded] com.RemoteControl.USBLAN.panther (1.6.2) [Support]
Launch Agents: ℹ️
[not loaded] com.adobe.AAM.Updater-1.0.plist [Support]
[running] com.epson.eventmanager.agent.plist [Support]
[loaded] com.hp.messagecenter.launcher.plist [Support]
[loaded] com.oracle.java.Java-Updater.plist [Support]
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist [Support]
[invalid?] com.adobe.SwitchBoard.plist [Support]
[loaded] com.oracle.java.Helper-Tool.plist [Support]
[loaded] com.oracle.java.JavaUpdateHelper.plist [Support]
User Launch Agents: ℹ️
[loaded] com.adobe.AAM.Updater-1.0.plist [Support]
[loaded] com.google.keystone.agent.plist [Support]
User Login Items: ℹ️
None
Internet Plug-ins: ℹ️
Silverlight: Version: 5.1.20125.0 - SDK 10.6 [Support]
FlashPlayer-10.6: Version: 16.0.0.287 - SDK 10.6 [Support]
Flash Player: Version: 16.0.0.287 - SDK 10.6 [Support]
QuickTime Plugin: Version: 7.7.3
JavaAppletPlugin: Version: Java 7 Update 71 Check version
Default Browser: Version: 600 - SDK 10.10
3rd Party Preference Panes: ℹ️
Flash Player [Support]
Java [Support]
Time Machine: ℹ️
Time Machine not configured!
Top Processes by CPU: ℹ️
5% WindowServer
3% mds
0% AppleSpell
0% SystemUIServer
0% configd
Top Processes by Memory: ℹ️
112 MB Google Chrome
67 MB Finder
59 MB Google Chrome Helper
52 MB mds_stores
52 MB WindowServer
Virtual Memory Information: ℹ️
48 MB Free RAM
628 MB Active RAM
579 MB Inactive RAM
741 MB Wired RAM
1.56 GB Page-ins
2 MB Page-outs
Diagnostics Information: ℹ️
Jan 22, 2015, 10:40:55 PM Self test - passed -
Video both in source window and edit window stops after just a few seconds. It also runs slow after a few seconds. I don't if the problem is the fact that it;'s a Vimeo down load. Any one got a suggestion as to why?
More information needed for someone to help... please click below and provide the requested information
-Premiere Pro Video Editing Information FAQ http://forums.adobe.com/message/4200840
Exactly what is INSIDE the video you are editing?
Codec & Format information, with 2 links inside for you to read http://forums.adobe.com/thread/1270588
Report back with the codec details of your file, use the programs below... A screen shot works well to SHOW people what you are doing
http://forums.adobe.com/thread/592070?tstart=30 for screen shot instructions
Free programs to get file information for PC/Mac http://mediaarea.net/en/MediaInfo/Download -
As soon as I plug my iphone4 (running 4.3.3) into my pc, it appears in the left hand column and the little wheel starts turning. Then it stops after a few seconds and itunes freezes. I have tried everything. Can anyone help. Thanks
Hi Patrick,
Yes, a very frusterating issue indeed. Someone else had mentioned a possible issue with real player, I tried getting rid of that and same issues. I even got completely rid of firefox for the moment. Guess what, problem still is persisting. I think this means it maybe something else altogether. I will go back to re-add firefox after I get this straightened out but now using Chrome for the moment.
What I've also found out is that the sound can be restarted when I unplug and replug in the 3.5mm speaker cable from the audio output jack on the back of the computer. Any ideas?
Thanks! -
Download stops after run window asks for password or to run as current user.
when I try ro download Firefox the download stops after it asks to continue as the administater or current user. I do not remember my password so I try to continue as the current user and the program just disappears.
if you save the download of firefox to your computer and then right click and say "Run as Adminstrator" it should work...i was having the same problem and it worked for me.
-
I can't download Lion 10.7.2 from the App Store. It starts downloading but stops after anything from 5 mins to 5 hours! Help!!
I'm having the exact same problem with a dual core iMac. Absolutely driving me nuts...cleared out all my caches before starting; have restarted MANY times after every failure; plenty of RAM, plenty of GBs on HDD; all else updated and my broadband working fine.
Can anyone help on this? -
I run with the Nano and shoe sensor. After I covered 250 miles I got the automated congratualtions, but now after every run I get the recorded message again saying I just covered another 250 miles. Can I reset or stop it without completly resetting everything?
Same issue here. This is really disappointing. I used to look forward to the milestone messages after each run, especially when I was surprised by a celebrity voice. Now, it's the same thing every single time, "Congratulations on another 250 miles. Way to go!" or something along those lines. I was proud of the 250 mile mark, but please...I don't want to hear it every time!
I hope there's some movement on this issue.
~ Heather -
Why does my mac mini run great for first half hour then run so slow almost to a stop?
why does my mac mini run fine then after a half hour runs very slow?
EtreCheck version: 2.2 (132)
Report generated 4/30/15, 3:58 PM
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Click the [Click to remove] links for help removing adware.
Hardware Information: ℹ️
Mac mini (Late 2012) (Technical Specifications)
Mac mini - model: Macmini6,1
1 2.5 GHz Intel Core i5 CPU: 2-core
16 GB RAM Upgradeable
BANK 0/DIMM0
8 GB DDR3 1600 MHz ok
BANK 1/DIMM0
8 GB DDR3 1600 MHz ok
Bluetooth: Good - Handoff/Airdrop2 supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
Intel HD Graphics 4000
Thunderbolt Display 2560 x 1440
System Software: ℹ️
OS X 10.10.3 (14D136) - Time since boot: 7:15:27
Disk Information: ℹ️
APPLE HDD HTS545050A7E362 disk0 : (500.11 GB)
EFI (disk0s1) <not mounted> : 210 MB
Macintosh HD (disk0s2) / : 499.25 GB (475.54 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
USB Information: ℹ️
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
Apple, Inc. IR Receiver
Apple Inc. Display Audio
Apple Inc. Apple Thunderbolt Display
Apple Inc. FaceTime HD Camera (Display)
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Apple Inc. Thunderbolt Display
Gatekeeper: ℹ️
Mac App Store and identified developers
Startup Items: ℹ️
FanControlDaemon: Path: /Library/StartupItems/FanControlDaemon
Startup items are obsolete in OS X Yosemite
Problem System Launch Daemons: ℹ️
[failed] com.apple.mtrecorder.plist
Launch Agents: ℹ️
[loaded] com.oracle.java.Java-Updater.plist [Click for support]
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist [Click for support]
[failed] com.apple.spirecorder.plist
[loaded] com.macpaw.CleanMyMac3.Agent.plist [Click for support]
[loaded] com.oracle.java.Helper-Tool.plist [Click for support]
User Launch Agents: ℹ️
[not loaded] com.jdibackup.JustCloud.autostart.plist [Click for support]
[loaded] com.jdibackup.JustCloud.backupstart.plist [Click for support]
[loaded] com.jdibackup.JustCloud.notify.plist [Click for support]
[loaded] com.macpaw.CleanMyMac3.Scheduler.plist [Click for support]
[running] com.spigot.SearchProtection.plist [Click for support]
User Login Items: ℹ️
iTunesHelper Application Hidden (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
CleanMyMac 3 Menu Application Hidden (/Applications/CleanMyMac 3.app/Contents/MacOS/CleanMyMac 3 Menu.app)
Internet Plug-ins: ℹ️
FlashPlayer-10.6: Version: 17.0.0.169 - SDK 10.6 [Click for support]
Flash Player: Version: 17.0.0.169 - SDK 10.6 [Click for support]
QuickTime Plugin: Version: 7.7.3
JavaAppletPlugin: Version: Java 8 Update 45 Check version
Default Browser: Version: 600 - SDK 10.10
Safari Extensions: ℹ️
Slick Savings Adware! [Click to remove]
Ebay Shopping Assistant Adware! [Click to remove]
Searchme Adware! [Click to remove]
3rd Party Preference Panes: ℹ️
Fan Control [Click for support]
Flash Player [Click for support]
Java [Click for support]
Time Machine: ℹ️
Time Machine not configured!
Top Processes by CPU: ℹ️
4% WindowServer
2% fontd
0% taskgated
0% notifyd
0% cloudpaird
Top Processes by Memory: ℹ️
836 MB kernel_task
82 MB WindowServer
66 MB JustCloud
66 MB SubmitDiagInfo
66 MB loginwindow
Virtual Memory Information: ℹ️
12.00 GB Free RAM
4.33 GB Used RAM
0 B Swap Used
Diagnostics Information: ℹ️
Apr 30, 2015, 08:42:48 AM Self test - passed
Apr 29, 2015, 09:04:50 AM /Users/[redacted]/Library/Logs/DiagnosticReports/com.apple.WebKit.WebContent_20 15-04-29-090450_[redacted].crash -
how do you download itunes onto a new laptop? I tried to run app but it stops after 4% complete. Tried to re run and the same thing happens. Laptop has windows 8.1
Does anyone have any tips?Hey clarissa01,
Thanks for the question. I understand that you are experiencing issues installing iTunes for Windows. The following resource may provide a solution:
Issues installing iTunes or QuickTime for Windows
http://support.apple.com/kb/HT1926
Thanks,
Matt M.
Maybe you are looking for
-
I upgraded to an iPad2 and recently pulled out my old iPad 1 to re-gift to a family member. I can't remember the password I originally set up - is there a way to get beyond this? Each time I try a different password (trying any that I thought I migh
-
1. how can I change one color in design on a web site for exemple background : white to light-brown? 2. how can I edit visual bookmark on the beginning page?
-
How do you manage to sync your music with your iPhone/iPod?
Hello everyone! I want to ask you how you manage to keep your music library synced with your iPhone/iPod. For years I managed to copy music onto the iOS device manually as my iTunes library was way to large to fit my iOS device. Some months ago I cre
-
(How) Can a SP call the Function which has BULK COLLECT return?
I have a function using BULL COLLECT to put (XML data) many line into a table type record. (I had this as a function because it's gong to call many times). From one SP program, I will need to call it to get converted XML data info, how should i call
-
Hi, my table is exg(phone_no,com_date) Records are like 1111 01-oct-2004 2222 01-oct-2004 3333 02-oct-2004 1111 05-oct-2004 1111 08-oct-2004 3333 09-oct-2004 Is there any select qeuery to get the report like 1111 01-oct-2004 1111 05-oct-2004 1111 08-