Action to be able to save an overlaid graphic with original name of file

Question -
Please help I want an action to keep the name of a file after I have copied it and put it over a new background.
It would normally be saved as "unidentified.jpg"
Thank you.

Boyd3756 wrote:
Question -
Please help I want an action to keep the name of a file after I have copied it and put it over a new background.
It would normally be saved as "unidentified.jpg"
Thank you.
An action can not do what you want though a script if it knew what layer was the original image and the layer had the name you want the file to have a script could be programmed to do what you want. However.
If you copy a file into a new folder or copy a file in the same folder with a new name. Just open this new copy and replace its background by placing the new back below or over the image and mask the correct layer the let the background show through the original image or mask the new background to let the original image below it show through. Then when you save it the name should remain the same as the file you opened. Untitled-x is a new document default mane. You could also just type in the file name you want when you open the new document in you current work-flow.

Similar Messages

Save in Version set with original

Brand new to Elements, and I am using Elements 9. When I have an image open, jpeg, opened in the editor, I would like to check th =e ox saying Save in Version Set with Original, but it doesn't allow me too in the Saving options. Can anyone tell me why and how I can fix it so I can ? Thanks in advance !

Browse and read to know more about the setting. It is almost similar to PSE9.
http://help.adobe.com/en_US/PhotoshopElements/8.0/Win/Using/WSae2ea3b149d0c3591ae939f10386 0b3d59-7f2e_WIN.html.
-garry

Not able to SAVE changes in Graphical Screen Editor

Hi All,
I am not able to SAVE the changes which i do in SE51 using the Graphical Screen Editor.
I get the below message:
"EU_SCRP_WIN32 :connection to ctxprdcgy016.pcacorp.net"
If i use my ID on my colleagues system I am able to SAVE the changes without any error.
I am using Citrix Client to connect to remote server.
PLease if anyone has any solution

Hi
If the connectivity speed is too slow, then you will get this error. Since you are Citrix connectivity, you will log on to client network using remote log on. This will make your connectivity slow.
There is a note for this problem and note no is Note 133903 - Upgrade of graphical Screen Painter.
https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=133903
Please go through below threads
Screen painter error: EU_SCRP_WN32 : timeout during allocate / CPIC-CALL
Error EU_SCRP_WN32 Time out
Shiva

Not able open any apple website (starting with the name apple) on any of the browser(safari, Opera..etc) on my MacBook pro

Hello Everybody,
Few months back I have upgraded my OS to latest Mountain Lion version.
I am facing a unique problem for last1 month. I am not able to open any of the apple website starting with the name "Apple" such as apple.com, http://www.apple.com/mac/, http://www.apple.com/ipod/ etc but I am successfuly able to open http://store.apple.com/ (as you can see this is not starting with apple but starting with store).
I have reseted my safari, tried different browser such Opera, but not successful.
Can you please provide a solution for this?
thanks
@di

Hi I have same prob on a client's Macbook Pro and iMac both on 10.5.8 (but problem there before update). Have deleted all cookies (and preferences and cookie database etc), history etc but problem reappears after 3 or links are clicked on www.apple.com site. If I clear cookies problem goes away again only to come back. Have tried creating a new user account - same problem! tried archive and install of OS X, same problem still. tried two different internet connections - same problem. problem not limited to web browsers either - iTunes has issues and client had his iPhone lock itself because he could not connect to apple to verify the device when he installed a software update. Major headache. Any ideas would be great!

Way to save MS Word file as a PDF with original MS Word file date?

For archiving purposes, I'm betting PDFs will be readable (backwards compatible) long after my current file saved in Microsoft Word becomes out of date. Anyone know of a way I can save my Word file as a PDF while retaining the original Word file last-modified date (for patent protection reasons to prove date of authorship)? (or Word to text file or ASCII file would also be equivalent as long as original date is kept)

I doubt that a computer date would suffice for legal proof of date. It is easily changed for those that know their way around the computer. I would have to play a bit, but could probably do it without too much trouble. About the only way to satisfy the need for a patent is to properly insert the pages in a patent notebook and get the information notorized. From what I have seen, the legal profession generally requires hard copy, not a computer file. A loose-leaf form is also typically not acceptable, but a bound notebook properly annotated. The notorized aspect is a way around some of this I think. In any case, it sounds like you need to consult a patent attorney.

Save the PDF Form with Field Name

HI Guys,
I have the Requirment in PDF Form.The PDF Form is generated with the Adobe Live Cycle Designer.After generating the PDF Form the user filled the details in the form and save the filled form.while clicking the Save button the default PDF name is displayed in the File name box.The Requirement is iam having one field in the form.The Field name value should needs to displayed in the File name box during saving.Is it possible.Once its possible please let me know.This is needs to be delivered very shortly.
Thanks & Regards,
SatheshKumar R

You can save the form with name generated from a field's value, but therefore you will have to install a folder level script first and design a custom save button in your form.
You cannot do this with the applications save or save as... buttons, and you also cannot rename a file on submit.
Here's an example form and a folder level script. (Maybe to complicated fdr newbies)
http://thelivecycle.blogspot.com/search/label/Save

Not able to view users in F4 with Last Name, First name with tcode-PA20

When we go to PA20 tcode and input personel id the details are shown for person.
But When I select F4 at the Personel Number and enter Last Name and First Name - It shows No Values selected
Which authorizations are required for populating F4 data in tcode PA20.
Warm Regards,
Rajesh

HI
You can check the authorization , after u execute PA20 , search as u described.
Come out of that tcode , run SU53 , u will get exact missing objects in the Auth,
Regards
sameer

Is there a way to "Save As" when downloading with Firefox?

I want to be able to "Save As" when downloading with Firefox. The only options I am given is to Save or Open. All the previous questions I have seen deal with being able to save to a certain location, and that I can easily set in Firefox. What I want is to be able to change the filename, so if it goes to download "abc123.pdf" I can rename it to "123abc.pdf" when it downloads.
We use a web based application that I have to pull down pdf charts multiple times every day, but the problem is when you go to download a chart, every one is the same name. I can't just save it to the default directory since it will overwrite the previous one or just append a (1) or something. What I have to do now is use the Open option and have a pdf reader open it, then save from the pdf reader giving it a unique filename, which is extra steps that I do not have to do when using IE, Opera, etc. since I can do a Save As from those and rename it before it downloads.

See:
*Options > General : Downloads : "Always ask me where to save every file"
*https://support.mozilla.org/kb/Downloads+window

When I save a Word 2010 doc as a pdf file, it opens up in Adobe Reader as a blank page, no text, no background etc.

When I save a Word 2010 doc as a pdf file, it opens up in Adobe Reader as a blank page, no text, no background etc. I am logged on as the Administrator, running Windows 7, using Microsoft Home and Business 2010.

You were right, it was a Microsoft problem.
I got it...I am now able to save a Word 2010 document as a pdf file. Here is what I did/found:
In Word, go to File, Options, Display and make sure that "Print drawing created in word" is CHECKED.
Mine was unchecked and when I checked it everything came back and is working as it did before. The only thing I can think of is that a Microsoft Update may have changed this selection...I know I DID NOT make any changes in the options.
One other thing I noticed in my saved documents folders was that a lot of my files showed up as PDF's and would still not open until I selected one and told it to default to open as a word document and then they all changed back and I was able to open them in word again.
I hope this helps others out there.

Unable to save the Crystal Report with Dynamic paramters in Enterprise

Hello,
We are not able to save our Crystal Report with dynamic parameters in Enterprise, Error message as follows :
"Failed to read data from report file C:\DOCUME1\...\crw{...}.rpt. Reason : Failed to read parameter object"
CR Developer Version 12.0.0.683
help us in this regard..
thanks,
Narasimha Murty

Hello,
The error message occurs because the user or group who created the LOV does not have the appropriate rights in Business View Manager.
Try this hope its helps
To resolve this issue follow the steps,
1.Log on to Business View Manager as administrator.
2.Click View > Repository Explorer.
3.Right-click Dynamic Cascading Prompts. Click Edit Rights.
4.Click the appropriate user or group receiving the error.
5.Click the Granted option for the right to View, Edit & Set Security rights.
6.Click OK. Close Business View Manager.
The user or group is now able to save a report with dynamic parameters to Enterprise.
Regards,
Vinay

Not able to save data in pa30 action infotype in production

Hi,
In my organization users are not able to save data in SAP HR pa30 action info type in production.
It is gets hanged and throws run time error after run long time .
in ST22 it will give below error:
Runtime Errors   TSV_TNEW_PAGE_ALLOC_FAILED
Information on where terminated
    Termination occurred in the ABAP program "SAPLRHAS"   in "FILL_STRU_TURBO"
    The main program was "MP000000 ".
    In the source code you have the terminated point in line 759
    of the (Include) program "LRHASF00".
Thanks and regards,
Tarun

Hi,
     Pls check your relationship of reporting postions and set up relationship A002 and also check organization relationship
    otherwise take help form ABPERs and debug and partiuclar prorgram and where and witch object its throwing
    error found out.
Regrads,
Tarun

Not able to save bindings when calling bindings.getOperationBinding("update") in customized method.

Hi All,
I'm new to ADF and trying to learn it.
I'm using JDev version 11.1.1.6.0.
My use case is mention below :
1. I've created 2 Bounded task flows and calling one task flow from another task flow using task flow call activity.
2. In child task flow, i've created view activities with Train component. View activities have text fields, radios buttons, tables etc which can be filled by user.
3. I want to save the page data to payload if I move to next view activity using Next button or by train bar.
To accomplish this scenario, I'm calling a customized actionListener on click of Next button/Train Stop Bar in which I'm using below mention code :
BindingContext bindingContext = BindingContext.getCurrent();
BindingContainer bindings = bindingContext.getCurrentBindingsEntry();
OperationBinding obj = bindings.getOperationBinding("update");
if(obj != null){
     obj.execute();
     if(!obj.getErrors().isEmpty()){
          System.out.println("Not able to save data......");
     else{
          System.out.println("able to save data......");
But I'm not able to save page data to payload/bindings. If i close the window using browser close button and move back to previous train stop in which i've filled the data, the data get lost and all the text fields/Radio button become empty.
If I use Save button provided by Oracle BPM, then I'm able to save it. and data reflected even after if i close the window using browser close button.
So I also try to use the below acode but did not get any success :
FacesContext fctx = FacesContext.getCurrentInstance();
Application app = fctx.getApplication();
ELContext elContext = FacesContext.getCurrentInstance().getELContext();
InvokeActionBean invokeActionBean = (InvokeActionBean)app.getELResolver().getValue(elContext, null, "invokeActionBean");
invokeActionBean.setAction(actionEvent);
invokeActionBean.action();
Can somebody please let me know, what am I doing wrong here or if I'm missing anything.
Any pointers/suggestions for its resolution are welcome.
Thanks in advance.

Hi Timo,
Yes, it is the same binding which is called from BPM Save button.
I did not use the debugger but i tried to print the OperationBinding object which was showing me proper binding for update.
Even when i tried to print the return value of invokeActionBean.action(); method, it print the proper string "closeTaskFlow".
So if I see it logically, then I'm just trying to call the methods of InvokeActionBean from my customized method.
If methods of InvokeActionBean not being accessed, or if it was not getting called, then it should not print the "closeTaskFlow" as return value.
I only want to save page data into bindings once I'll move away from page precisely on moving next.
If there is any other work around for this issue, please let me know.
I've also tried to use Explicit/Implicit save points provided by ADF but that did not work too.

I need to be able to save pictures with a specific name and email as a .jpg file (not an jpeg image). Any app suggestions to be able to do this?

I purchased Photoshop Touch which let me save the picture with a name, but when I emailed it, is was an jpeg image.
Anyone know how I can do this or have suggestions for other apps. I've done quite a bit of research and having trouble finding this specific type of information
Thanks!!

Hi, I had the same issue. My solution was to take the freeware-tool clickto.
So I'm now able to take any text, copy it and past it via clickto into a new mail.
[http://www.clicktoapp.com Clickto ]expands your copy-paste feature by showing you some "satellites" after doing the copy action. These "satellites" now will give you some opportunities to paste your copied content, for example a picture to facebook or a text to a new mail on gmail with just 1 single click.

Not able to save a newly created Data Model in BI Publisher.

Hello everyone,
I was trying to create a new Report (my very first report) in BI Publisher. I created a new Data Model and a Data Set. But I am not able to save the Data Model and thus not able to proceed to the report. There's no error shown. Same happens with reports too.
Kindly provide me with a solution.
Regards
Ash
Edited by: 902739 on 28-Dec-2011 01:02

You should have a group called 'XMLP_ADMIN' in your repository and administrator or the user you are using should be part of that group. Look into paint.rpd for all these.

Not able to save purchase order

hi
i am a super user i have related the PO with the SO when i am saving the purchase order i am getting the error message " you cannot open rows in document [purchase order-rows-row status][line:0][message 131-194]
Regards
Manish

hi the proble is resolved actually i had to disable the coding done in transitional notification and was able to save the purchase order
Regards,
Manish

Action to be able to save an overlaid graphic with original name of file

Similar Messages

Maybe you are looking for