Action Window needs to be resized

the action window is so big that i cannot resize it as i
cannot get to the lower right corner to do so. As a result, there
are pieces of data that i cannot see at the bottom of the list.
The same holds true if i open a new file, the window is
enormous. I have an Apple Cinema display monitor.

I actually do not know, why it behaves like that sometimes.
Just for your information, you can do the following to get it back,
if you don't wan't to reset the entire workspace.
1. Click on the double arrows at the top right corner (or
double click at the dark grey bar at the top). This should turn th
Actions panel into icon view.
2. Click the icon Actions. This opens the panel again, a lot
smaller that before.
3. Now resize it a bit, by dragging in the lower right
corner.
4. Finally, click the small double arrows again, to expand
the panel.
Best Regards
Karsten

Similar Messages

  • Why does the Firefox window needs to be resized manually every time you do something? HELP!

    I'm am using a 64-bit version of windows 7.
    I installed Firefox (New PC) and when i started using it every-time i clicked on something the browser would appear to freeze. But when i re-size the window by just dragging it out it would "unfreeze" and start working again until i clicked on something.
    Posting this problem was a real chore.
    I have tried uninstalling and reinstalling (with many versions) , i have try Waterfox and Nightly but i have been having the same problems.
    I have 8gbs of ram and 2gb graphics, i have installed all adobe plugins and silverlight and i don't know what to do?
    I don't have this problem with explorer or chrome but i hate them both. HHHEEEELLLLPPPPPPP!
    Thanks in advance!

    View > Statusbar = un-check it to hide it

  • Problem with action window gone :(

    I use flash 5, and up until now haven't had any troubles
    like this with it.
    I was trying a game tutorial for a simple 'guide the cursor
    thru a maze ' tutorial, and when i went to click 'actions' on the
    button symbol onstage, the action window is not coming up anymore
    and i have tried window>actions to no avail
    the arrow at the bottom right lights up like it is
    appearing, but i cannot find the window anymore.
    it usually appears right beside the symbol i am working on.
    I know this sounds stupid.. but i am now stuck in the middle
    of working on my project :(
    thanks in advance for any help..
    i just hope i wont have to uninstall and then reinstall the
    whole program :(
    i use windows xp home on an e machine if that may
    help.

    http://forum.java.sun.com/thread.jspa?threadID=5127437&start=10&tstart=0
    Gets more interesting on the second page.
    The rendered attribute doesn't agree with the request scope so much... You'll need to get a little more creative.
    CowKing

  • Frame skipping from the Multiple Actions window (Cp4)

    Can anyone remind me how to trigger this:
    rdcmndGotoFrameAndResume := rdinfoCurrentFrame -10
    but from the Multiple Actions window on Cp4?
    I want to show a colleague how to set up a slide with multiple images that the learner can click as many times as they like to show relevant captions (and hide previously shown ones). Obviously the big problem is stopping the project from continuing until the learner clicks a separate Continue button.
    Normally I'd use Advanced Actions and add the code above in addition to the show/hide stuff, but this time I want to keep things as simple as possible using Multiple Actions as it's far more intuitive - but it won't let me do this kind of assignment.
    Any suggestions? One of the options is to execute javascript but I'm not sure what the javascript equivalent of this is, or even how it should get wrapped up in that window.
    Thanks

    As far as I can remember, you cannot create an 'expression' like this in Multiple actions, you only have the Assign action but the system variables that you can access with Assign are limited.
    Moreover I want to warn you: Multiple actions were abandoned in Captivate 5 and later because they do not always function well. So be very careful using them.
    If you want to show this, you'll need to use advanced actions, that have the possibility to access all variables and to create expressions.
    Why do you rewind the playbar 10 frames?
    Lilybiri

  • CS5 32-bit opens with no menu, empty actions window

    When I open CS5 32-bit the main window has nothing in it but a white background. There are no menu items or toolbox. The Actions window open completely blank (transparent except for the frame). The application is unresponsive to any mouse commands (trying to grab and move the window doesn't do anything).
    Task Manager shows that it's consuming around 12% CPU time and around 73 MB memory.
    Last week I was editing some photos when I got an error that an action could not be performed because of a program error. I haven't been able to use the 32-bit version ever since, but the 64-bit version is fine.
    I've removed CS5 and reinstalled it. I've also rebooted several times.
    I need the 32-bit version so I can use DFine2.
    Anyone seen this?

    I use the Nik suite, and I removed all of the Nik apps when I removed CS5.
    I'll try the Ctrl-Shift-Alt on startup after I finish with this batch of photos I'm working on.
    If that doesn't work my next plan is to remove CS5, all the Nik software, then clean my registry and reinstall it all.
    Any reason I should remove CS4 also?
    Ed

  • Windows needs to install driver software for your unknown device

    Windows needs to install driver software for your unknown device
    This is the message that i get when ever i plug in my ipod touch to my computer. the computer is running on vista. i dont know what to do, because i tried to follow the steps suggested, but it didnt work, the computer said that it couldnt find anything and to check with apple for some driver software. HELP!!!

    The iPod touch and iPhone do not use the same type of USB drivers that other Apple devices use. They both require Apple Mobile Device Services to be running. Using this tech article as a guide, you can easily fix this: http://support.apple.com/kb/TS1567

  • I need some help resizing my images on PS6. I am using a mac and have been trying to resize with same resolution and constaining proportions but for some reaseon the smaller resized image appears pizelated.

    I need some help resizing my images on PS6. I am using a mac and have been trying to resize with same resolution and constaining proportions but for some reaseon the smaller resized image appears pizelated. Heres an image of before and after. The first image I use is a JPG 72dpi 1500px x1500px and I want to downsize it to 600x600px same res, but it keeps pixelating, this has never happened before. Any suggestions, thoughts?
    thanks!

    I wouldn't say pixelated; more like blurry.
    Like ConnectedCreative said, what steps are you using? Are you using "bicubic sharper" when resizing down?

  • Dynamic Action-help needed

    Hi ,
    My requirement is in dynamic Action I need to delimit all records in a Subtype of an Infotype and create New record for these records with BEGDA as ENDDA + 1 of the delimited records.
    Iam able to delimit all records in the Subtype but , Iam not able to create new records.
    My code for delimiting is as given below, in T588Z,
    9901 2 06 801 P P9901-SUBTY='2'
    9901 2 06 802 P PSYST-IOPER='MOD'
    9901 2 06 803 P P9901-STATS='X'
    9901 2 06 804 P P9901-PREAS='91'
    9901 2 06 805 F DELIMIT_DTE(ZHSRAS_T588Z_9901)
    9901 2 06 806 W P9901-ENDDA=RP50D-ZZDATE3
    9901 2 06 807 I MOD,9901,3
    9901 3 06 808 P SY-UCOMM='UPD'
    9901 3 06 809 F DELIMIT_DTE(ZHSRAS_T588Z_9901)
    9901 3 06 810 W P9901-ENDDA=RP50D-ZZDATE3
    The above code is working fine.
    My code for creating new record is as given below, even though the control is oing to the subroutine, INS statement is not working, and hence new record is not getting created.
    9901 3 06 811 P SY-UCOMM='UPD'
    9901 3 06 812 P PSAVE-ENDDA<>P9901-ENDDA
    9901 3 06 813 P P9901-STATS<>'X'
    9901 3 06 814 I INS,9901,3
    9901 3 06 815 F BEGIN_DATE(ZHSRAS_T588Z_9901)
    9901 3 06 816 W P9901-BEGDA=RP50D-ZZDATE3
    9901 3 06 817 W P9901-ENDDA='99991231'
    Kindly help me on this.
    Thanks in Advance

    hi,
    thankyou for all ur valuable replies.
    Time constraint for this custom infotype is 2.
    It is not allowing to create a new subtype record if 1 exists.
    Here scenerio is
    Each Subtype ,ie, Subtp 2 ad 3 has got 4 records each with distinct OBJPS field.
    when STATS field of subtype 2 is changed for any 1 record in Subtype 2, corresponding record in Subtype 3 should get delimited .
    And, rest of the records of Subtype 3 should get created again with new start date.
    The code I have written for this is ,
    9901     2          06     800           *BEG*****DEATH OF WIDOW*****************
    9901     2          06     801     P     P9901-SUBTY='2'
    9901     2          06     802     P     PSYST-IOPER='MOD'
    9901     2          06     803     P     P9901-STATS='X'
    9901     2          06     804     F     DELIMIT_DTE(ZHSRAS_T588Z_9901)
    9901     2          06     805     W     P9901-ENDDA=RP50D-ZZDATE3
    9901     2          06     806     *     ****PSAVE-ENDDA<>P9901-ENDDA
    9901     2          06     807     F     LOCK_REC3(ZHSRAS_T588Z_0015)
    9901     2          06     808     I     <b>MOD,9901,3,P9901-OBJPS,(P9901-BEGDA),(P9901-ENDDA)</b>
    9901     2          06     812     *     *BEGCREATE NEW REC FOR SURVIVING WIDOWS******
    9901     2          06     813     *     *
    9901     2          06     814     P     P9901-STATS<>'X'
    9901     2          06     815     F     BEGIN_DATE(ZHSRAS_T588Z_9901)
    9901     2          06     816     W     P9901-BEGDA=RP50D-ZZDATE3
    9901     2          06     817     W     P9901-ENDDA='99991231'
    9901     2          06     818     I     <b>COP,9901,3,P9901-OBJPS,(P9901-BEGDA),(P9901-ENDDA)</b>
    9901     2          06     819     *     *ENDCREATE NEW REC FOR SURVIVING WIDOWS*****
    9901     2          06     830     *     ***END*****DEATH OF WIDOW*****************
    Control is going to all routines, but
    MOD,9901,3,P9901-OBJPS,(P9901-BEGDA),(P9901-ENDDA)  and
    COP,9901,3,P9901-OBJPS,(P9901-BEGDA),(P9901-ENDDA) is not working.
    Message was edited by: Shahana Shahul
    Message was edited by: Shahana Shahul

  • Open or Save to harddiskoption pop up window needed when clicked on pdf lin

    Subject : Open or Save to harddisk option pop up window needed when clicked on pdf link
    I have a web application. There will be some pdf links in the application. When clicked on these links I read the content from database and output as bytestream. But when end user clicks these files the pdf will open in the browser or in Adobe based on his Adobe setting
    Note : Experimentation done on Adobe Acrobat reader 5
    Setting 1> Edit - Preferences - Options - Check on the 'Display PDF in browser' option
    pdf opens up in the browser itself without asking any option
    Setting 1> Edit - Preferences - Options - Check off the 'Display PDF in browser' option
    on click it opens a windows pop up window asking me either to 'Open' or 'Save' . If I say Open it opens in Adobe.
    Can this setting be controlled by my application itself [from Java servlets]? I want the opp up to be asked for every end user who clicks on the pdfs irrespective of what settings he has in Adobe Acrobat

    I am not sure whether this will work. But it's possible to download the pdf file. Try the following
    response.setContentType("application/download");
    String filename = <<filename>>
    response.setHeader("Content-Disposition","attachment;filename=\"" + filename + "\"");
    Read the file into a bufferedOutputStream and then
    int bytesA = bis.available();
    response.setContentLength(bytesA);
    write the content to ServletOutputStream..
    Sagar

  • Flash 11.5.1 freezes after typing F9 for actions-window

    Hello together,
    we've installed Creative Suite 5.5 Production Premium on a Samsung P560 Notebook under Windows Vista Business 32Bit. The installation routine finished succesfully and we were able to start flash. There we can use nearly everything but the action-window. As soon as we type F9 or choose Window -> Actions F9 the program starts to work until it gives no feedback. We've already updated CS5.5 with all available patches. The Nvidia-Driver for the GeForce9600M GS graphics card was also updated. Has anyone an idee what could provoke this behaviour? Further more it would be interesting if there are logs in which the application could write occuring failurs?
    Thanks a lot and with best regards
    David

    Please post in the Flash forum. This forum is for suite specific issues only.
    Bob

  • HELP! How do I remove the paragraph tags in the Actions window?

    Hi =)
    When I'm coding action script in the Actions window of Flash, in line breaks, the paragraph symbol is present, and there are dots in all the spaces, etc., etc.
    I accidentally turned this on, and don't know how to turn it off.
    It's like the paragraph symbol button in Microsoft Word.
    Can anyone help? I'd be FOREVER grateful.
    -"DLA"

    OMG THANK YOU!!!!
    Thank you, thank you, thank you!!!
    Man, I was really starting to sweat it here, but it worked!
    I'm forever thankful,
    DLA

  • T61: Windows needs to install driver software for your ATA Device-help!!

    Every once in a while after I turn on my laptop I get this message: "Windows needs to install driver software for your ATA Device." WTF? REALLY W-T-F? I am not computer illiterate When I reinstall the driver (from the site) it works. Then I turn on the computer and get the same message. PLEASE HELP... W-T-F?????????
    The DVD player has been out of commission all of May so far.  I can't stand this.  What is happening?
    I can't even download the driver from Lenovo.
    PLEASE HELP.
    Thanks in advance.
    You are a God if you can't help me fix this.
    Moderator note: Type added to subject line for clarity. The title of a thread should accurately reflect the subject of the discussion and be as technically specific as possible as stated in the forum rules.
    Message Edited by Agotthelf on 30-05-2009 08:21 AM

    Welcome to the forum!
    Since I'm not quite certain that God frequents this forum, would you please tell us the model number and operating system of your ThinkPad and we'll take it from there...
    Cheers,
    George
    In daily use: R60F, R500F, T61, T410
    Collecting dust: T60
    Enjoying retirement: A31p, T42p,
    Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
    Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you.

  • Multiline string in the Actions window

    There's no doubt a simple answer for this, but it's been
    driving me nuts for years. In the Actions panel I am writing a
    paragraph of text to appear in a dynamic text field. If I write it
    as a single line (stretching maybe a half a mile), it comes out
    fine. If I try to break the text up for convenience only, like...
    display.text = "This is an experiment to see if there's any
    way
    to type several lines of text in the Actions Window.";
    ... I get a syntax error back. If I insert a backslash at the
    end of the first line, like...
    display.text = "This is an experiment to see if there's any
    way\
    to type several lines of text in the Actions Window.";
    ... the text will appear correctly in the text field, but the
    backslash will also appear. I don't want a line-feed or a carriage
    return (\n, \r); just want to be able to break up the string as I'm
    writing it. Any suggestions? Many thanks in advance.

    var str:String = "You should use a variable to store your
    string in. That way";
    str += "you can concatenate lines of text together when you
    run out of room";
    str += "You can also set the Actions window to use word wrap
    if you";
    str += "find that your going off screen and have to scroll to
    see all the text.";
    str += "Once you've created your text than assign the
    variable to the";
    display.text = str + "dynamic text box";

  • Actions window won't open

    When I select a the {.} 'trigger/actions' icon it won't open the Actions window. I can see a faint outline/shadow of a window about 50px X 50px  which stays offset from the click location as if the window won't redraw
    Also when I use the Code Window hitting CTRL + S to save inputs 'DC3' at the cursor position and fails to save the composition.
    The application is also running very slow and a Save takes about 5 - 8 seconds an iMac (with thin retina display - so relatively recent)

    DOWNGRADE SOLUTION - Adobe Edge Animate 4.1 to 4.0.1
    I managed to copy the Application folder from one of the other Desktops that still had the older version.
    Initially there was a pathing issue to the newer version (Probably still in regedit) however I just adjusted the Application Folder name and since the path resolves it's all working now on 4.0.1 again.
    Adobe has completely changed the symbol Obj in 4.1 so if you are referencing undocumented attributes to symbols in your legacy applications you're in for an interesting day or two upgrading all your scripts. PLAN FOR THIS IN YOUR QUOTE TO A CLIENT if you intend to upgrade any Legacy applications
    Only lost 6 hours of development time.

  • Payment Actions Window Setup

    hello,
    From Payments --> Actions : how can I enable the Print Now checkbox and enter all the required data of a program to print out?
    Please note that in the Payment Actions window all checkboxes are not enabled and are not active; do not alow me to make an option.
    Regards,

    hello,
    From Payments --> Actions : how can I enable the Print Now checkbox and enter all the required data of a program to print out?
    Please note that in the Payment Actions window all checkboxes are not enabled and are not active; do not alow me to make an option.
    Regards,

Maybe you are looking for