Actions available in BRFplus since which NetWeaver / ECC release
Q.) Actions have been part of BRFPlus since which SAP releases / support packs ?
In NW 701 there was already the ruleset and in rules you can use actions.
But it was hardly usable.
I would say you can use all that as of NW 702.
Similar Messages
-
Since which version does NetWeaver embed Jco3?
Does anyone know since which version does NetWeaver embed JCo3? This information is not available in JCo3's support matrix. Or can you please provide an official link to describe this. Thanks.
Unfortunately not (I searched and couldn't find ). But it's so.
-
I have create Logic App under Azure App Services, I am getting
error while using HTTP connector and calling POST action to a Web API which is deployed as website on Azure.
Following are the screen shots:
Login App Connector Diagram:
hemaMarking as answered since no response on request for more information - assuming that you found what was wrong in the inputs. Let us know if you're still having trouble.
http://twitter.com/joshtwist -
LSMW problem since upgrade to ECC
Not sure if this is posted in the correct place, so apologies in advance if it is...
We have an LSMW object which uploads customer master data onto the system (account group 0005). This has works for years, but we have since upgraded to ECC and now the partner function part does not seem to be working.
We load up a PE partner function and a number to go into RF02D-KTONR. This gets picked up correctly from the file into the position screen 2324 but it then doesn't get put into the field on screen 324. This just gets left as 0 so when the batch input session is run they all error with the Message No. F2613 Number '0' is not defined.
I have searched on OSS notes but I can't seem to find anything, does anyone have any ideas?
Kind Regards
CarlyI logged this problem with OSS and there was a combination of things that we did to make this work...and we are not really sure what change actually helped the situation.
We ran progam RFBIDEG0
We also changed config in the following:
IMG >> SD >> Basic Function >> Partner Determination >>
Setup Partner Determination >> Customer Master >>
Account Groups - Function Assignment
adding PE & 0005 as we were having problems with prospects customers...
I'm not 100% sure what else was done as OSS were logged onto our system for a while trying to solve the issue...
Hope this helps
Regards
Carly -
How can I transfer albums from one of my accounts to another? My new account (Apple ID) email address is no longer available to me since I lost my job.
OK, now I have another problem. I typed in my email address wrong. Instead of optonline.net I typed in optimum.net. Though I can google my email address and it defaults to the optonline.net the email to confirm the change is not showing up. I know, real stupid. Now I cannot log onto either address as the original is not changed and the email has not showed so am I done here? I appreciate your help!!! Carl
-
'Bluetooth not available' error message since upgrading to Leopard
Hi, I regularly seem to get a 'Bluetooth not available' error message since upgrading to Leopard, any ideas why, have to reboot to shake it.
cheers
SimonI solved the same issue by resetting the SMC. With the computer off, remove the battery and press and hold the power button for 5 seconds. Then reinstall the battery and restart. I haven't had any bluetooth issues since.
-
Is there any policy available by Apple through which I can exchange my iPhone 4s to iPhone 5?
I have recently bought iPhone 4s. Within one month iPhone 5 get launched. Is there any policy available by Apple through which I can exchange my iPhone 4s to iPhone 5? I am ready to pay the extra amount.
I have recently bought iPhone 4s. Within one month iPhone 5 get launched.
I bought iPhone 4s on 20th July.
Huh? How did you figure that the iPhone 5 was launched "within one month" of your purchase?? The iPhone 5 wasn't released until September in the USA and later in India. Your sense of entitlement exceeds your skill with a calendar. -
ChaRM: SDTM Test Message, no actions available
Hello Solution Manager Gurus, in our system, when a Test message is created it can be set to In Process, but when it is In Process there are no actions available.
This is the contents of the action determination log:
Determination started
Application: CRM_ORDER action profile: SDTM_ACTIONS
Application class: CL_DOC_CRM_ORDER_H GUID: DF014BC822CBE4F1AC2A0014227724B9
Action ON_CREATE_TM (During Creation)
1 conditions for action ON_CREATE_TM were read
Condition 1 is not fulfilled
Determination did not deliver any action templates
Action Merging: One Unprocessed Action with Equality Check
Action CHECK_STATUS_TM (Checks Consistency)
1 conditions for action CHECK_STATUS_TM were read
Condition 1 returns an action template
Number of action templates from the determination: 1
Action CHECK_STATUS_TM type MET was generated and added
Action Merging: One Unprocessed Action with Equality Check
An identical action has been determined again
Action CHECK_STATUS_TM of type MET is kept
Action CHECK_STATUS_AGAIN_TM (Check Test Message Again)
1 conditions for action CHECK_STATUS_AGAIN_TM were read
Condition 1 is not fulfilled
Determination did not deliver any action templates
Action Merging: One Unprocessed Action with Equality Check
Action LOGON_TM (Logon to System)
1 conditions for action LOGON_TM were read
Condition 1 is not fulfilled
Determination did not deliver any action templates
Action Merging: One Unprocessed Action with Equality Check
Action IN_PROCESS_TM (Take "In Process")
1 conditions for action IN_PROCESS_TM were read
Condition 1 is not fulfilled
Determination did not deliver any action templates
Action Merging: One Unprocessed Action with Equality Check
Action TO_RETEST_TM (Pass to "Retest")
1 conditions for action TO_RETEST_TM were read
Condition 1 is not fulfilled
Determination did not deliver any action templates
Action Merging: One Unprocessed Action with Equality Check
Action TESTED_AND_OK_TM (Confirm Correction)
1 conditions for action TESTED_AND_OK_TM were read
Condition 1 is not fulfilled
Determination did not deliver any action templates
Action Merging: One Unprocessed Action with Equality Check
Action WITHDRAW_TM (Cancel Test Message)
0 conditions for action WITHDRAW_TM were read
Determination did not deliver any action templates
Action Merging: One Unprocessed Action with Equality Check
Balance follows
Edited by: Richard Bailey on Jan 14, 2010 4:32 PMHere is the balance of the log:
Action TESTED_AND_NOT_OK_TM (Reset "In Process")
1 conditions for action TESTED_AND_NOT_OK_TM were read
Condition 1 is not fulfilled
Determination did not deliver any action templates
Action Merging: One Unprocessed Action with Equality Check
Action RELEASE_REQUEST_TM (Release Transport Requests)
1 conditions for action RELEASE_REQUEST_TM were read
Condition 1 is not fulfilled
Determination did not deliver any action templates
Action Merging: One Unprocessed Action with Equality Check
Action CREATE_REQUEST_TM (Create Transport Request)
1 conditions for action CREATE_REQUEST_TM were read
Condition 1 is not fulfilled
Determination did not deliver any action templates
Action Merging: One Unprocessed Action with Equality Check
Action CREATE_TASK_TM (Create Task)
1 conditions for action CREATE_TASK_TM were read
Condition 1 is not fulfilled
Determination did not deliver any action templates
Action Merging: One Unprocessed Action with Equality Check
Action NAVIGATE_TO_TASKLIST_TM (Go to Task Plan)
1 conditions for action NAVIGATE_TO_TASKLIST_TM were read
Condition 1 is not fulfilled
Determination did not deliver any action templates
Action Merging: One Unprocessed Action with Equality Check -
Just erased my disk, whent to install Maverick and get : "Not available now" message since yesterday. Can someone help me revive my dead IMac!!
If you are selling or giving away the computer then follow these instructions:
Follow these instructions step by step to prepare a Mac for sale:
Step One - Back up your data:
A. If you have any Virtual PCs shut them down. They cannot be in their "fast saved" state. They must
be shut down from inside Windows.
B. Clone to an external drive using using Carbon Copy Cloner.
1. Open Carbon Copy Cloner.
2. Select the Source volume from the Select a source drop down menu on the left side.
3. Select the Destination volume from the Select a destination drop down menu on the right side.
4. Click on the Clone button. If you are prompted about creating a clone of the Recovery HD be sure
to opt for that.
Destination means a freshly erased external backup drive. Source means the internal startup drive.
Step Two - Prepare the machine for the new buyer:
1. De-authorize the computer in iTunes! De-authorize both iTunes and Audible accounts.
2, Remove any Open Firmware passwords or Firmware passwords.
3. Turn the brightness full up and volume nearly so.
4. Turn off File Vault, if enabled.
5. Disable iCloud, if enabled: See What to do with iCloud before selling your computer.
Step Three - Install a fresh OS:
A. Snow Leopard and earlier versions of OS X
1. Insert the original OS X install CD/DVD that came with your computer.
2. Restart the computer while holding down the C key to boot from the CD/DVD.
3. Select Disk Utility from the Utilities menu; repartition and reformat the internal hard drive.
Optionally, click on the Security button and set the Zero Data option to one-pass.
4. Install OS X.
5. Upon completion DO NOT restart the computer.
6. Shutdown the computer.
B. Lion and Mountain Lion (if pre-installed on the computer at purchase*)
Note: You will need an active Internet connection. I suggest using Ethernet if possible
because it is three times faster than wireless.
1. Restart the computer while holding down the COMMAND and R keys until the Mac OS X
Utilities window appears.
2. Select Disk Utility from the Mac OS X Utilities window and click on the Continue button.
3. After DU loads select your startup volume (usually Macintosh HD) from the left side list.
Click on the Erase tab in the DU main window.
4. Set the format type to Mac OS Extended (Journaled.) Optionally, click on the Security button
and set the Zero Data option to one-pass.
5. Click on the Erase button and wait until the process has completed.
6. Quit DU and return to the Mac OS X Utilities window.
7. Select Reinstall Lion/Mountain Lion and click on the Install button.
8. Upon completion shutdown the computer.
*If your computer came with Lion or Mountain Lion pre-installed then you are entitled to transfer your license once. If you purchased Lion or Mountain Lion from the App Store then you cannot transfer your license to another party. In the case of the latter you should install the original version of OS X that came with your computer. You need to repartition the hard drive as well as reformat it; this will assure that the Recovery HD partition is removed. See Step Three above. You may verify these requirements by reviewing your OS X Software License. -
Any commercial web services available in the market which buy/subscribe?
Hi Folks,
I would like to know best commercial web services available in the market which buy/subscribe/opensource which will give us the currency exchange rates for common currencies of the world ? Example : USD to INR or USD to GBP.pls list them.
Thanks,
developerI have found few commercial/free web services for currency exchange:
Commercial Web services:
DOTS Web Services (http://www.serviceobjects.com/products/commerce/currency-exchange)
Xignite Web Services (http://www.xignite.com/xCurrencies.asmx)
StrikeIron Web Services (http://www.strikeiron.com/ProductDetail.aspx?p=481)
Free Web Services:
Web Servicex (http://www.webservicex.net/WCF/ServiceDetails.aspx?SID=18)
Thanks,
Rajeshwar. -
Is it possible to find out since which date do I h...
Is it possible to find out since which date do I have an account on skype ? And how?
please contact Skype customer service
TIME ZONE - US EASTERN. LOCATION - PHILADELPHIA, PA, USA.
I recommend that you always run the latest Skype version: Windows & Mac
If my advice helped to fix your issue please mark it as a solution to help others.
Please note that I generally don't respond to unsolicited Private Messages. Thank you. -
How to Create Delivery for a delivery detail which is in Released Status 'Y
Hi All,
I am trying to create delivery for a delivery detail which is in Release Status (Release status 'Y'). When I am trying to create trips using the API 'wsh_delivery_details_pub.Autocreate_del_Trip', I am getting this error “Delivery ID XXXXX is not eligible for action Auto-create Trip”.
Please advise.
ThanksHi Gokula,
Web Application security is defined in the servlet spec. You should use
web.xml and weblogic.xml to configure security instead of using acl's
I am enclosing the link to the relevant documentation below
http://e-docs.bea.com/wls/docs61/webapp/security.html#100365
Gokula Krishnan wrote:
Hi All,
I am working on Weblogic6.1 and iPlanet Directory Server 5.1. I
am trying to create ACL's in Weblogic and to test a Web Application
which I have configured in weblogic. The problem is I am not able to
create a ACL for the web application resource in weblogic. Could any
one pls help me on how to create ACL through weblogic console.
I try creating ACL as per the document but I dont now how to give
permission and map the ACL for the resource.
Thanks in advance...
With regards,
Gokul. -
How to reverse service order which is in released state
Hi,
Please guide me how can we reverse a service order which is in released state.
Is it possible to reverse a service order with released state?
Please guide it is very urgent.
Thanks and Regards
Edited by: MPVash Vash on Dec 5, 2008 10:04 AM
Edited by: MPVash Vash on Dec 5, 2008 10:06 AMHi,
a delivery suspension due to non-payment can just be released via an incoming payment.
You could also manually do this be setting the end date of the suspension, but I would not advise that. As I currently do not have system to check I'm not sure whether you could use ISM_SALES_ORDER_CHANGE, but you can try via the where-used list of structure JKSI_SUSPEND which needs to be used in this case.
Tim -
How could I find out which user did release a transport request in the sour
How could I find out which user did release a transport request in the source system
Hi Tina,
Use SE10 t-code and type abaper user name in the user field then check released check box then display and select request number which is released, double click on said request number and click on "object list of request" Then click on "comment: released" than you can find out the released user name at the end of request number along with dated of released.
I hope you problem will be solved.
Regards,
Anil -
General availability of MDM GDS 2.1, which NetWeaver Version is supported?
Hello Community,
does anyone know when GDS 2.1 is general available and which Java NetWeaver Stack version will be supported?
Kind Regards,
TobiHi Tobi,
GDS2.1 might will be GA around December 2010, but this is not official.
Regards,
Gabor
Maybe you are looking for
-
How to delete apps in iphone 7?
Upgraded to iOS 7. Loving it so far and all the new features. Only issue is while rearranging my aps I realize there were some I didn't need anymore such as some games I no longer played. But now I can't seem to figure out how delete them. Anyone hav
-
Facebook Profil in Oracle CRM on Demand
Image: !http://wiki.crm-gadget.com/_/rsrc/1261156485888/home/facebook/Bildschirmfoto%202009-12-18%20um%2018.05.57.png! How to do you find Link: Facebook
-
Missing segment in invoice idoc
Problem: A segment in IDOC is missing. This contains the internal record text of a pricing condition type... when i look at the condition type, no changes were made to it since it's creation and it is automatically determined in the pricing condition
-
Hi everyone, We need you help. We are working in SRM 7 and ECC 6 EhP 4. We have a doubt. Can we use badis BBP_SOURCING_BADI and BBP_DETERMINE_LOGSYS at the same time in a classic scenario? We want to create the contract in ECC, and then we want to re
-
Hello, I'm trying to embed an icc profile in a pdf, I am actually doing like this: char *filePath=NULL; ASPathName ICCPath; asprintf(&filePath,"%s/ICC_PROFILES/%s",DataDirName,profileName); #if !macosx ICCP