Actions command make not available

I have been working with PSE since version 2 but have not posted in this forum so if I break a "rule", I apologize in advance.
Using PSE 13 ( new to this version) on a pc - Win 7 - hp laptop - plenty of hd space and memory
I have downloaded actions from a very reputable site and cannot get them to run. The error message: The command "make" is currently not available.
I've downloaded and unzipped fresh copies 3x. Deleted and reloaded to PSE 13 3x. So I thought the problem was in the actions until I ran through some of the default actions that came within PSE 13. Borders and Lose Weight seemed to work but when I came to Sepia Toning, I got the same error message. The message gives me the option to "continue" or "stop" but the action doesn't run correctly if I chose "continue".
Thanks in advance for your help.
Roberta

It might also be that the psds since from lightroom are 16 bits per channel.
After you transfer the psd from lightroom to photoshop elements, if you go to Image>Mode and click on 8 Bits/Channel, do the actions work?

Similar Messages

  • "This command is not available because no document is open" when opening Word 2013

    Whenever I launch Word 2013, the error message "This command is not available because no document is open" appears.  This causes an issue that prevents a program called SNAP used for education from working properly.  I've been able
    to work around the error message itself by disabling the start screen for Word 2013, so it opens straight into a blank document, but SNAP still does not work.
    I've not been able to make any headway researching the issue.  It seems most people run into this error scripting or coding, and it's usually that they try to save a document or something before they actually make the document.
    I don't know that it's relevant, but this is occuring on a 32-bit Windows 7 box.

    Hi, I work with SNAP Technical Support and this is a known issue with Cengage's KPDO add-in.
    Cengage Keyboarding's Add-In to Word prevents the SnapPlayer application from communicating with Word. This add-in will
    need to be disabled.
    You
    may see the following error in the log when this occurs:<Exception>System.Runtime.InteropServices.COMException
    (0x80080005): Retrieving the COM class factory for component with CLSID {000209FF-0000-0000-C000-000000000046} failed due to the following error: 80080005.at
    SnapPlayer.Skills.Applications.Word.Launch() in D:ProjectsVisual StudioSnap PlayerSnapSkillsApplicationsWord.vb:line 234
    Disabling the add-in will resolve the issue.

  • Problem in converting word to html- file get error msg 'This command is not available because no document is open'

    Hi,
    I write the some asp code to save the word file from client machine to server machine , and convert it into the html file.
    it working fine when i debug the code into the visual studio but when i deploy code on iis it give me a error 'This command is not available because no document is open' , while i try to save file into html format.
    lot of time i try this give all the security full access to iis user and other things .
    can any one help me. i fully frustrated from this problem. 
    my need only upload the word document from client to server machine and convert it into the word document. 
    only IIS give me the problem, suggest me what setting i need to do in iis 
    please help me humble request 

    Hi,
    In this forum we mainly discuss questions about Office client questions and feedbacks, issues related to coding are not supported here.
    Based on the description, although the question is about converting Word documents, it's more likely to be a permission issue, the question is better to be posted in the IIS.NET forum:
    http://forums.iis.net/
    The reason why we recommend posting appropriately is you will get the most qualified pool of respondents, and other partners who read the forums regularly can either share their knowledge or learn from your interaction with us. Thank you for your understanding.
    Regards,
    Melon Chen
    TechNet Community Support
    It's recommended to download and install
    Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
    programs. Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
    [email protected]

  • Could not complete Photomerge command because COMMAND was not available. What do I do now?

    Text of message when I tried a Photomerge: "Could not complete Photomerge command because "command" was not available."
    How do I fix this?

    Lots more information needed. Operating system and version, version of PSE, what exactly did you do to create your merge, step by step.

  • Why netflow commands are not available in 4506-E?

    Hi,
    we have one 4506-E Chassis , Sup7L-E , LAN Base with cat4500e-universalk.SPA.03.03.00.SG.151-1.SG.bin image
    why netflow commands are not available not available in this. someone said netflow will work only with IP base License , is that right?
    Or how to enable it 
    thanks
    Sujish 

    Hi,
    For Nwtflow, you need IP Base or Enterprise Services License.
    See table-1 in this link;
    http://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst4500/release/note/OL_26675-01.pdf 
    HTH

  • Error when running Actions - Command "set" not currently available.

    I am trying to run an action for creating a 3D paperback book. Every time I run it, whether I make changes or not, it stops part of the way through the second step with the error message 'command "set" not currently available'. If I continue anyway, it completes the action but the end result doesn't look right. What can I do to fix this?

    Yes, it was a free download I found online and yes I was following the steps. However, I ended up fixing the issue by downloading an updated version of the same action that was part of a set of 3D actions. This one was not free but it was well worth it to save me the time and headache of trying to figure out how to fix the other one. Plus it came with tons of other awesome actions that I will use as well.

  • Save command currently not available

    Hi
    I have created a Photoshop plugin and it was working fine..Now suddenly I am facing an issue..On execution, I am getting an error "Save Command is currently not available". I have not changed anything in code. I am not able to trace the reason.
    Earlier I thought that it is space issue and I vacated memory in my system. But no luck.
    Please guide.
    Thanks

    Something has changed in my functions for doing batch actions in Bridge.  In CS5 Bridge I try to do a simple batch action of saving a DNG file as a jpg and closing the file.  When I attempt this I get a message saying 'The command "Save" is currently not available.
    Batch using tools menu from Bridge to reach Photoshop should work as expected in both CS4 and CS5. If not then there is something wrong on either your system or install.
    Go to Bridge CS5 preference and look for the section Start Up Scripts and see if there is still a Start Up Script for Photoshop CS5 present and with a checkmark in front for activation. If not try first to restart bridge holding down option key and choose refresh preferences. This should retrieve the original Start Up scripts again.
    If your command save as is not available check the action and see what the save path for that acton is. If it is a copied action from an other system changes are that it still contains the save path for the old drive and if the script can't find it it provides a warning message.
    Also check if the drive you save to has both read and write permission.

  • Office 2013 : Ribbon some commands are not available

    hi,
    Sometimes, in excel or others applications, we have some issues regarding ribbon : commands are not functional !
    We must close office applications to get back to a normal state.
    We did a migration from Office 2007 to Office 2013.
    best regards

    Hi,
    First, please make sure your Office program is fully patched.
    If you installed any third-part program that is integrated to Microsoft Office, please temporarily disable the integration to check the result. Also try to disable all add-ins in Office programs to check the result.
    In addition, please try to run a repair of your Office installation and then test the issue again:
    http://office.microsoft.com/en-in/project-help/repair-office-programs-HA010357402.aspx
    Hope this helps.
    Best Regards,
    Steve Fan
    TechNet Community Support

  • GuiXT- Command 'column' not available

    hi Gurus,
    1] I am getting a error in GuiXt command 'column'
        The command line in BOM CS02 transcation is,
        Column "AvStock" size=8 name="AvStock" position=5
        Earlier same command line was working and i was getting a column named   
        AvStock in CS02, without any changes now after some days system says 
        that command 'column' is not available. This applies to all different systems
        (PC's) GUI for same server.
    2] What are all settings should be done to get the effect of changes through GuiXt
        at Server level. Like putting a system name in guixt.ini file in server system.
    Thanks in advance,
    Abhi.

    The Syntax used was wrong.

  • Ringtone maker not available

    I have a Lumia 800 and I just yesterday received the 7.8 update for my phone.
    I'm trying to get the Ringtone maker application but when I click the QR code to open the download link, it opens the information page of Ringtone maker, which says that "This application is not available for your phone." Any ideas how to circumvent this as my firmware is up to date and Ringtone maker should be available in Finland.
    The firmware version is 1750.0823.8852.12430.

    You just got updated with 7.8 and may I know how much memory available after the update?

  • Darwin.cli : Most of the cli commands are not available

    Most of the command lines in 6.1 does not work in vcloud application director 6.1 for example
    list-cloud-tunnels' was found but is not currently available (type 'help' then ENTER to learn about this command)
    spring> create-cloud-tunnel
    Command 'create-cloud-tunnel' was found but is not currently available (type 'help' then ENTER to learn about this command)
    spring> cliversion
    vCloud Automation Center Application Services CLI BUILD 6.1.0-2064245
    Copyright (c) 2011-2014 VMwareInc. All rights reserved. This product is protected by U.S.
    and international copyright and intellectual property laws.
    VMware products are covered by one or more patents listed at http://www.vmware.com/go/patents
    spring> display-user
    Command 'display-user' was found but is not currently available (type 'help' then ENTER to learn about this command)
    spring> list-cloud-tunnels
    Command 'list-cloud-tunnels' was found but is not currently available (type 'help' then ENTER to learn about this command)
    spring>

    Thanks for your reply, i used the below command but not enough luck
    login --serverUrl  https://************:8443/darwin --username admin --password ********** --tenantId gis
    According to the documentation here vCloud Application Director 6.0 Documentation Center admin has ROLE_SYSTEM_ADMIN,ROLE_CLOUD_ADMIN,ROLE_CATALOG_ADMIN,ROLE_APP_ARCHITECT,ROLE_DEPLOYER,ROLE_SYSTEM_INTEGRATOR permissions hence i was logging in as admin.
    Thanks
    Nataraj

  • Problems with actions "...not available

    Hi Guys,
    I recently purchased some actions and strangely sometimes when using the action I get error messages like "Layer Backgrund Color is not currently available" or "Warning: No Pixels were selected" etc. Those errors do not always occur in the same way but definatly I don't get the designated result once the action is finished. Strangely those actions should work in PSD CC, as far as author says and other buyers commented.
    I checked for Panel Options "Use Default Mask on Fill Layers" and Adjustments -> Add mask by default as those possibilities were suggested on other websites as a problemsolver. Nothing changed so far.
    Am I missing something? This "... is not available" shows up on several complex actions with many layers (20+).
    Maybe you guys not what causes this problem and how to solve it.
    Many thanks!
    Michael

    Seems like preferences were mixed up. Reset them on start up with ALT+STG+shift (on windows)

  • "go to : Favorites" and shift+command+F not avail. in OS X 10.3.9?

    My computer came with OS X 10.2.8 and I grew fond of the keyboard shortcut "shiftcommandF" to open my Favorites folder. Now that I have 10.3.9, this feature does not work.
    I no longer see anything on Help or System Pref's to indicate the shortcut exists, even though the shortcut still appears on lists I google'd online (including http://docs.info.apple.com/article.html?artnum=75459 on apple's website).
    The Favorites folder does not even show up any more under the "Go" drop-down on the Finder's menu bar.
    Was this shortcut done away with in OS X 10.3.9? Or is this a malfunction of my system? If it WAS done away with, is there anything I can download or script to re-introduce this capability?
    Thank you.
    xopher
    powerbook g4   Mac OS X (10.3.9)  

    I have no experience with altering or creating keyboard shortcuts. What I have suggested, and what you have already with the favourites in the sidebar, is access to that folder in two mouse clicks.
    I just don't think it is worth the time or the expending of brainpower to try and create a shortcut shorter than two mouse clicks.
    I hope you find what you are looking for.
    regards roam

  • ISCSI target setup fails: command "iscsitadm" not available?

    Hello,
    I want to set up a iSCSI target:
    however it seems I don't have
    iscsitadm
    available on my system, only
    iscsiadm
    What to do?
    Is this
    http://alessiodini.wordpress.com/2010/10/24/iscsi-nice-to-meet-you/
    still valid in terms of set up procedure?
    Thanks

    Ok,
    here you go using COMSTAR:
    pkg install storage-server
    pkg install -v SUNWiscsit
    http://thegreyblog.blogspot.com/2010/02/setting-up-solaris-comstar-and.html
    svcs \*stmf\*
    svcadm enable svc:/system/stmf:default
    zfs create -V 250G tank-esata/macbook0-tm
    sbdadm create-lu /dev/zvol/rdsk/tank-esata/macbook0-tm
    sbdadm list-lu
    stmfadm list-lu -v
    stmfadm add-view 600144f00800271b51c04b7a6dc70001
    svcs \*scsi\*
    itadm create-target
    devfsadm -i iscsi
    reboot
    Solaris 11 Express iSCSI manual:
    http://dlc.sun.com/pdf/821-1459/821-1459.pdf
    and that for reference
    http://nwsmith.blogspot.com/2009/07/opensolaris-2009-06-and-comstar-iscsi.html
    Windows iSCSI initiator
    http://www.microsoft.com/downloads/en/details.aspx?familyid=12cb3c1a-15d6-4585-b385-befd1319f825&displaylang=en
    works after manually adding the Server's IP (no auto detect)

  • Getting "the command "fill" and "invert" is not available at this time".  how do I fix this?

    I recently purchased photoshop cc and loaded my actions.  I'm getting these two errors:
    1.  the command "fill" is not available at this time
    2.  the command "invert" is not available at this time.
    is there a way to fix this?
    Thanks

    Some commands are not available if you have the wrong thing selected. For example, the incorrect type of layer which doesn't support the Fill command. Look at what is currently selected when the error occurs. Then modify your action to make sure that the correct item is selected.

Maybe you are looking for