Actions does not executed on quotation saved.

Hi,
Actions does not executed on quotation save.
Action profiles has been created as per my production system.
In production system it is executing properly. but in development system it does not get triggered.
Pls suggest.
Points will be rewarded.
Thanks

Hi Vinayak
U can check in 'Define Conditions' for the actions and see whether the actions for the Action profile have been scheduled or not.
On the left hand side u get the action profiles. U can right click on that and schedule the actions.
Plz reward points if it helps.
Thanks and regards
Debolina

Similar Messages

"Action does not exist error" during country transfer action

Hello, everyone.
We are on ECC5.0 with MGE. Recently our users are getting an error - "Action does not exist on mm/dd/yyyy" when they perform a country transfer action (transfer from country A to country B). Because this is a hard error, the action is stopped and our users have to re-execute it. Surprisingly, the action works fine for the second time.
The error comes from message class PG no. 022 in the Include program MP000040.
We raised this issue to SAP but all they told us to look into our user exits. We were told to remove our exits entirely to see the error happens. The problem is that this error does not happen each time.
Has anyone experienced this error? If so, does anyone know why this is happening and how to resolve it?
We tried to debug the code step by step and came across CPREL is filled with "02" in OBJPS for infotype 0000 in the program FP50MF10. We have no idea as to how the OBJPS is filled with a value. Infotype 0000 is not supposed to have this field populated. We think this is the root cause of the error. But why does it happen?
Any help will be greatly appreciated.
Regards,
Noriko

Hi.
We use both PBAS0001 and HRBAS00_CCHANGE.
Noriko

Adobe Encore CS4: End action will not execute because of end action on the final chapter point

Error screen:
Error I’m getting for section titled Notes (PP 45 second video): “End action will not execute because of end action on the final chapter point.”
The icon that shows error is in top line second from end. I’m trying to 'end action' that portion of the video by going back to 'menu default'; also tried end action w/ ‘Stop’ and neither work.
I saw a post about checking timeline. Not sure what I’m looking for there. I have nothing in Orphanage area. I also tried building despite Check Project error and it will not build project. Any suggestions on how to fix: “End action will not execute because of end action on the final chapter point.”?

Select chapter one on that timelne. Look in the properties panel. Does it have an end action? You do not want an end action on the chapter; just on the timeline itself.
That will not generally prevent a build, however. So you may have other issues.

End action will not execute because of end action on the final chapter point

I will be referring to this video:
http://tv.adobe.com/watch/learn-encore-cs4/creating-an-event-dvd/
I followed this exactly, except for the slide show (and I made a DVD instead of flash), but when I checked the project, I get the error message "End action will not execute because of end action on the final chapter point".
I don't understand. I did not change any end points except for the one specified in this tutorial. (About the Max footage for the very beginning, before the menu). If anything was added, it was Adobe's doing.
I do notice that in 00:04 in the tutorial, there's a downward arrow on the very end of the timeline. My timeline does not have this. How was this done?
In the Encore software, after the timeline is loaded, there is no arrow at the very end. Mine doesn't have that either.
I'm finding Adobe/Encore's way of making menus rather difficult. With Pinnacle Studios (at least through 8-12), making menus was easy, and it set up the chapters for you. Why can't there be an automated menu feature in Encore?
Anyway, here's my project:
Main time line has 9 chapters. When clicking on their chapter points, all say End Action: not set.
When I click on the white bar above the lite purple footage of the time line, where the chapter point's bottom rest, it says, End Action: Not Set AND Menu Remote: Return to Last Menu.
All 9 chapter points are white.
In the flowcart, there is the DVD icon --> my few seconds opening credits --> menu that has a Play All and Scene Selection button
Play All goes to first chapter of video
Scene Selection (submenu #1) goes to 6 scenes, a next, previous, main menu. All seem to be linked properly.
Scene Selection for scenes 7-9 are in the #2 submenu. Has a previous button and a main menu button. All seem to be linked properly.
Can anyone offer any advice? Help? I need to make this DVD and two others by the end of the week!
If you need more information, please let me know that too.

If I make a change in the timeline in Premiere, will that new change be reflected in the timeline of Encore?
If you used Adobe Dynamic Link, then yes, the Timeline will be updated. If you did not, then you will need to Export again, then Import into Encore. Watch out if you have already Transcoded, etc., and I'd name the new Timeline Export differently, Import that, use Replace Asset. When a Project is very new, and nothing much has been done, it will not be so picky. After a couple of links, etc., it gets VERY picky, and Replace Asset will help.
Is there a way to reload the project without having to redo all the menus and links?
If you did a Save_As, or still have your original Project, i.e. you started a completely new Project with a unique name, you can go back to the original.
Hope that helps,
Hunt

Visual Approval Action does not complete

Hello,
I am using Visual Approval Callable Object in my Application but when the approver goes into the workitem to approve it ...the action does not complete and he gets the following message...on clicking on Approve/Reject button:
"Cannot complete action: The activity could not be read"
When I test the CO in designtime ...it works fine....and i have used visual approval CO at other places also....it works fine there...only at this one it gives an issue...i tried recreating it ....and also tried to put in a different block...but still comes with the same error....
Any help would be highly appreciated...
Regards,
Anil

George,
Thanks for the reply....I have checked the parameter mapping and the email address is also setup which is passed as a Context parameter for the Action processor ...but still gives the same error....
Please help.

The "portable document format" icon is a Word 2010 icon, so selecting Adobe Reader as action does not work to display the PDF.

In the Applications tab -- Content Type -- the "portable document format" icon is a Word 2010 icon (not Adobe), so selecting Adobe Reader or preview in Firefox as action does not work to display the PDF. I can see this Applications difference because my other Firefox laptop has the Adobe icon, and I can view PDFs. Essentially, a PDF is coming in as a Word document -- and the computer tries to open it up as a Word file.
How do I get the correct PDF icon in the Applications list -- the same way it displays (and works) on my other laptop.

Adobe PDF Plug-In For Firefox and Netscape 10.1.7 ?
I think you need to add this to the list of applications and the action to take on the type of content. This can also be managed in the about:permissions page. [[Permissions Manager - Give certain websites the ability to store passwords, set cookies and more]]

RH7- Insert action does not display window to select the file.

I have a nightmare situation with RH7 with no clue to resolve. What are my options to fix this
I am having trouble with robohelp, selecting insert action does not display the pop up window. This prevents functions such as inserting images & files, importing files and creating hyperlinks to documents created in word, frame maker.
when I perform this action, the pop up window appears virtually but is not visible to make the selection and RH freezes.
I have to end the process or press esc to find some work around - so far none available
Please help.

Welcome to the community.
Have you recently gone from a dual monitor setup to a single monitor? When this happens, RH can sometimes keep tossing dialog boxes over where it thinks the second monitor is. I typically use a program called ForceWindowVisible (get it here) to push wandering dialogs back into view. Give that a try and see if it works. Hope this helps,
Ben
GryphonMountain.net

When I touch my iPad screen to execute an app, the screen goes dark then the app icon reappears. The app does not execute.

When I touch my iPad screen to execute an app, then the screen goes dark then the app icon reappears. The app does not execute. Any thoughts?

Try a Reset...
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
Basic troubleshooting
From Here
http://www.apple.com/support/ipad/basics/

Oracle ADF refresh as deferred does not execute query on page load

In the oracle ADF page I have two panel boxes. (Oracle ADF 11.1.1.4)
a) Personal information panel box with PanelFormLayout (PersonalInfoViewObj) - ReadOnly View Object
b) Address information panel box with Table (AddressInfoViewObj) - Read Only View Object
For the iterators in a) and b) I have kept refresh condition as deferred and cacheResult=false. Also in b) for af:table, I have kept contentDelivery="immediate"
When page loads it fires SQL query for a) and populate the data in Personal information panel box. However for b) it does not execute the SQL query and the data is not getting populated ( in AddressInformation panel with the tables. Please note data is there in the DATABASE......)
Becasue with the refresh as deferred it was not executing the sql query for Panel b) (panel with Table and table iterator). I have tried refresh as always and refresh ifNeeded/renderModel/prepareModel however in that case it is executing the SQL query two times (twice).
Please let me know the best way to fix this issue.

Hi,
I think you need a method in an application module to init your data.
In your AM : create a method like :
public void init(){
getViewObject().executeQuery();
}In your adfc-config.xml create a methodCall from this method and a "control flow case" from the methodCall to your page.
and keep refresh as "deferred " in your pageDef.
Clément

Global succession updates are limited to 500 relationships. If more than 500 exist PLM presents a warning message and does not execute the update

Global succession updates are limited to 500 relationships. If more than 500 exist PLM presents a warning message and does not execute the update.
How/Where to increase the relationship count?
The message which I can see :
Warning:
This specification has exceeded the number of parent relationships allowed by Where Used. The Where Used tool only supports up to 500 parent relationships.
Thanks

This really brings up a larger topic around change management.
The questions you should start with is
1. What kind of change is happening to the raw material?
2. Will this change affect anything upstream inside or outside of PLM4P? (Will this change affect nutrition, compliance, the ingredient statement, the label etc?)
3. Who needs to approve this change?
If they are non-material changes (changes that don't affect theoretical calculations, the ingredient statement, labeling, upstream systems that need to be notified etc) then you should be using get latest revision instead of global succession. Get Latest Revision will automatically switch out the material with the latest approved version. This logic is also configurable in case you need to add additional guard conditions. We can also provide guidance around locking the get latest revision lock once a specification has reached the retired/obsolete state so changes won't occur for specifications in those statuses.
If the changes to the raw material are material changes (changes that affect calculations, labeling etc) then the change should be reflected with a copy of the specification. Dependent specifications then need to be re-issued so calculations can be performed and the appropriate workflow reviews can occur. Smart Issue allows for filtering based on status and should let you re-issue in smaller blocks.
Let me know more about your change management strategy, how often large material changes happen and maybe example causes for those mass changes. We can also schedule a change management training session for everyone where we can share our vision and tools available for change management. This topic is quite large and generally requires a lot of business process discussion beyond just the tools available.
Thanks
Kelly

User exit code does not execute

I'm having a problem with User exit code that does not execute yet seems to be set up correctly.
The User exit is implemented as FM "EXIT_SAPLIPW1_001" in function group XQSM.
I've tried everything I know of with the CMOD and SMOD transactions, and I suspect some sort of transport error.
The only clue I can find in comparing the development system (which works) with the test system (which does not work) is that running "Extended Check" in SE80 on function group XQSM fails with the following error:
"The namespace of program SAPLXQSM has the setting "C" and cannot be tested."
Has anyone any idea what could have happened?

Let us try to retrace the steps.
1. You created a Z project in CMOD and assigned the enhancement IQSM0001 and the component EXIT_SAPLIPW1_001 and activated the same. This is there in the transport.
2. You double clicked on the include in the user exit and created it. You activated the code and included it in the same transport.
If you did the above steps, then your user exit should be active in your test system.
Can you please go to SE10, and list out the objects in your transport? You should see entries in there like below(not necessarily a complete list)
R3TR CMOD <your project name>
R3TR PROG ZXQSMU01
See if you created any of the objects as local objects.
Srinivas

Why the "Actions" does not save the Overprint Black

Hi!
Ai CC 17.0.0
Why the "Actions" does not save the Overprint Black?
I can not create an action that will automate this time a very common activity?
Why?
Best Regards!

I was just able to. I am in Illustrator 6 on a Mac OS 10.6. I started a new action and went through the menu just like your screen shot, chose my options and clicked ok, then stopped recording the action.
I found to use the action I had to have something selected.
I see that you are in Illustrator CC, perhaps there is a difference there. But for the record, on my system, it worked.

'Save for Web' action does not set transparency for gifs ??!?

I recorded an action that just performs a 'Save for Web' while setting the white background to transparent.
The action does not save/preserve the transparency, in any mode I run it (i.e. Destination None | Save&close | folder).
Is this a known bug ?!? the same exact 'Save for Web' procedure do create a transparent background when performed interactively.
Thanks, ciao

Same issue. Hoping someone responds to this thread soon

Assigned F key to play an action does not work. Why? Using cs6 iMac and wireless key board

Assigned F key to play an action does not work to play the action on an image. When the F key is selected it seams to control computer attributes rather than the play action assigned in photoshop. Why? Using cs6 iMac and wireless key board.
Is this a possible preference setting in mac or is it a setting in cs6 photoshop ? Help and knowledge will be appreciated.

*** Moderator Action ***
This networking question has been moved from the Solaris 10 discussion space,
to the Solaris Networking discussion space, for closer topic alignment.
Whereas there may be IPV6 nuances specific to your Solaris 10 environment and to the hardware, this appears to be a discussion that may be more global in effect.

Tcode opens selection screen, but does not executes the program

Hi!
tcode opens selection screen of a custom program, but it seems that it does not executes the program itself.
Sounds strange, but how to explain this if I can run a program manually with no problem and it displays result screen, but when I try to run the program with tcode - it opens selection screen but program quits before displaying result screen. I was putting a breakpoint at the begining of the program - it does not triggers debuger when running a tcode (it triggers debugger if to run program manually).... any ideas?
Help will be appreciated,
Mindaugas

Are you using this???
SET PARAMETER ID '80B' FIELD T_TABLE-OPBEL.
CALL TRANSACTION 'FPE3' AND SKIP FIRST SCREEN.
That way it should work....
Greetings,
Blag.

Actions does not executed on quotation saved.

Similar Messages

Maybe you are looking for