Actions written in CS6 do not work in CC2014!

I have numerous actions written in CS6 that will not run in CC2014. Any distort or skew action is reversed. Not to say that the image is backwards, just that if perspective of a layer was changed (left side near,right side far) then the action will produce the opposite, (right side near, left side far). Has anyone else seen this?
Thanks.

Save the style to the styles palette, call up the saved style in the action.
Mylenium

Similar Messages

  • Photoshop cs6 is not working in windows 7 64 bit while all other cs6 programs are working.. what should I do make it work

    hi guys,
    My photoshop cs6 is not working in windows 7 64 bit while all other cs6 programs are working.. what should I do make it work?
    My OS is windows 7
    RAM - 8gb
    HDD - 1 TB

    are you getting any errors?
    and secondly and I know this from experience, ( but on 32 bit ) is it loaded already as in sat in task manager, but not actually get at able, killing the processes cures it or a reboot of course

  • Red eye tool in photoshop CS6 does not work

    Red eye tool in photoshop CS6 does not work. - why? have tried several times. Look at several videos, - but still my Red eye tool in photoshop CS6 does not work.

    Have you tried resetting Photoshop tools and if that does not work resetting Photoshop preferences?
    http://www.mouseprints.net/old/dpr/Redeye.wmv

  • When i type in the correct answer for my security question it always comes up as incorrect I have the answer written down but there not working can someone help

    hello
    when i type in the correct answer for my security question it always comes up as incorrect I have the answer written down but there not working can someone help

    Hi, Corinneact. 
    Thank you for visiting Apple Support Communities. 
    The usual cause for errors is that the security question responses are case sensitive.  If case sensitivity is not an issue with your answers, see the last step in the attached section of the article below. 
    Navigate to My Apple ID using your web browser.
    Click "Manage your account"
    When prompted, sign in using your Apple ID and password.
    Click Password & Security
    You'll be asked to answer 2 of your 3 security questions before you can make any modifications. If you are unable to remember your answers, you can choose to send an email to your rescue email to reset your security questions.
    Note: The option to send an email to reset your security questions and answers will not be available if a rescue email address is not provided. You will need to contact iTunes Store support in order to do so. 
    Rescue email address and how to reset Apple ID security questions
    http://support.apple.com/kb/HT5312
    Cheers,
    Jason H. 

  • Major features of Liquify Filter in CS6 are not working properly.

    The Liquify filter in PS 13.0 x64 does not work correctly.  The Forward Warp, Magnify and Hand tools work okay, but the rest of them procuce the same strange effect of a jumbled combination of swirl and black on white dot patterns. ending with a circular "transparent" pattern. I have just installed after removing 5.5 and using the Adobe Cleaning Tool. There were multiple errors in the installation log file, which I saved. I'm running Win 7 fully patched and up to date. I have a Toshiba Tecra wiith 6GB of RAM and an ATI Radeon DH 6450M GPU.
    Here is a screen shot:
    All three of the non-functioning tools begin with a swirly pattern quickly being jumbled by dots and checkerboard. If you hold the click for a few seconds it ends up looking like the above image.
    Could sure use some help. I use the liquify filter a lot and I don't want to waste a fortune by going back to CS55.

    Tested video cards for Photoshop CS6
    Adobe tested the following video cards before the release of Photoshop CS6. This document lists the video card by series. The minimum amount of RAM supported on video cards for Photoshop CS6 is 256 MB.
    Note: Adobe tested laptop and desktop versions of the following cards. Be sure to download the latest driver for your specific model. (Laptop and desktop versions have slightly different names.)
    nVidia GeForce 8000, 9000, 100, 200, 300, 400, 500 series 
    nVidia Quadro 400, 600, 2000, 4000 (Mac & Win), CX, 5000, 6000
    AMD/ATI Radeon 2000, 3000, 4000, 5000, 6000, 7000 series
    AMD/ATI FirePro 3800, 4800, 5800, 7800, 8800, 9800, 3900, 4900, 5900, 7900
    Intel Intel HD Graphics, Intel HD Graphics P3000, Intel HD Graphics P4000
    Note: ATI X1000 series and nVidia 7000 series cards are no longer being tested and are not officially supported in CS6 – some basic GL functionality may be available for both these cards.

  • Lightroom 5.4, syncing photo settings edited in CS6 does not work. Maverick OS 10.9, Raw 8.3.0141

    I recently updated Lightroom to 5.4 and noticed that when the file comes back from CS6, the edit/sycn settings does not work. Selecting the gray area of the source file, and selecting another, clicking on the sync produces nothing. When I select a source image and another that has not visited CS 6 the sync works fine. I have used this simple technique for years with previous versions and never had a problem. Something has changed with the update and/or compatibility with the file coming back into Lighroom. Any thoughts about this would be appreciated.

    ssprengel, thanks for following up. I work with DNG files in Lightroom that have been converted from Raw CR2 files. They are exported from Lightroom to Photoshop as Tiff files and any files that i edited and traveled round trip could not be used to sync other files in Lightroom. Even simple edits like saturation or exposure have disabled the file from being able to sync the settings to other files. I do most of the syncing of develop settings in Lightroom, but occasionallly I will adjust basic settings in Photoshop for one reason or another and after updating to 5.4 I noticed that sync worked fine within Lightroom only. I have tried a few changes to preferences with regard to how develop settings are registered with the file and that hasn't made any difference. Any ideas?

  • Help! InDesign CS6 tools not working

    Hello,
    I recently upgraded to CS6 on my PC and have run into some issues with InDesign. None of the tool buttons in the top ribbon or on my side menu function properly. For example, if I make a text box and wish to change the font, I can't select the font drop down menu, nor can I change the size of the type. This also happens when I create a shape and want to change size, color, line weight, line type, etc. Pages do not work either and I have had to use the bottom page navigation.
    I have tried uninstalling and reinstalling, but the problem did not go away. Any thoughts or suggestions?  Thank you!

    Windows 7? See InDesign tools and panels don't respond to mouse clicks (Windows 7/Vista)

  • Code Written In Servelet Is Not Working

    1. My name is Anand Patil, I have developed a web project with my partner.
    2. We both are using Tom Cat 6.0. And eclipse Juno as a IDE
    3. My partner is using operating system Windows 07 and I am using operating system Windows XP.
    4. All project files are exported on Windows 07 by using File System through eclipse juno
    5. When I import all project files by using File Systems on Windows XP through eclipse juno it gets imported properly.
    6. Now I have added a simple code System.out.println("check point one"); with other SOP. After addition of a small code
    I run the server, and when I check the output I donot get my newly added SOP message. The out put that I get is of previous code.
    7. This shows that updations in code are not working properly.
    8. Can any body will help me in getting out of this problem?
    9. I think may this problem is due to use of different operating system. Is it so?
    Actions taken to solve this problem are as bellow -
    1. We checked BuildAutomatically check mark from proect ment, that was on.
    2. We also clicked on clean option from project menu and we also refreched project list.
    3. We also deleted the whole project, server and workspace.
    4. We re-created workspace on different location and then re-imported the project.
    5. We also cleared Work directory that is present in ProgramFiles of TomCat server directory.
    By taking all above actions still we are facing same problem.

    You are putting a lot of effort into making your question as hard to read as possible :/
    The heart of the matter is this:
    Now I have added a simple code System.out.println("check point one"); with other SOP. After addition of a small code I run the server, and when I check the output I donot get my newly added SOP message. The out put that I get is of previous code.That must mean the updated .class file that Eclipse created (assuming build automatically is switched on) is not deployed to the tomcat instance you are using. You need to figure out why not, it is going to be a configuration mistake; try searching for Eclipse tutorials that describe how to deploy stuff to Tomcat from Eclipse and compare what you read to what you're doing yourself. In my experience it never works properly out of the box to be honest, there is always some mistake in the deployment assembly, build path, etc.

  • Cp8 pc, action 'exit' (for close app), not work for iphone app

    i found bug,
    when you use the action 'exit' on pc( it work well).
    but on iphone, it not work

    action "cpCmdExit" , it not work for iphone.

  • My CS6 is not working anymore

    Why is my serial number not working anymore? Until Christmas everything was working fine . Around new year CS6 stopped working. Serial number is not accepted. After deinstallation I try to install again. But my serial (also listed in my Adobe account) does not work.
    Regards,
    Gerard Kip

    Try: 
    My serial number doesn't work : http://helpx.adobe.com/x-productkb/global/my-serial-number-doesnt-work.html
    Otherwise, you need to contact Adobe Support either by chat or via phone when you have serial number and activation issues.
    Here are some links to help make contact:
    http://www.adobe.com/support/chat/ivrchat.html
    http://www.adobe.com/support/download-install/supportinfo/

  • Adobe cs6 apps not working with OS X Yosemite

    Illustrator and After Effects are not working with OS 10.10.1  After Effects opens into and is stuck in Render Queue. Illustrator says it need a previous version of java. Im a little nervous about going with a older version of java on my new machine
    Ps, Pr and Au seem to be working ok so far.
    Any Ideas??
    Thanks, Mike

    I am having the exact same problem with After Effects (13.1.1.3) OSX 10.10.1.  Renders lockup in the render queue hanging on frame 2.
    Whats the deal Adobe?
    If your going to push updates to customers all the time, your software has gotta be solid.
    I now have a client project that I can't render and I can't open in previous versions of AE either.
    Yours truly,
    Screwed.

  • Facebook forms and action links like "untag" do not work in 3.6.8

    I upgraded to 3.6.8 last night, and now nothing on Facebook will work. If I try to post a status update or something on a friend's wall, the form doesn't automatically expand upon clicking in the box, and the submit button doesn't work. Also, when I try to untag pictures, the link does nothing. I switched to Safari, and everything works fine. While I love Firefox and have been using it religiously for years, it just seems to get MORE bugs as time goes on, like Flash video players not working correctly sometimes until a full quit-and-reopen in the last version. I love Google, too, but have never bothered to try Chrome... until now. I'm finally going to download it. I'll be back, eventually.
    == URL of affected sites ==
    http://www.facebook.com

    Facebook - Everything works perfectly in Safari but since I upgraded Firefox to 3.6.8, messages don't work, comments, don't work, show all comments buttons don't work etc. Have removed cookies, logged out and back in, etc. problem remains.

  • Clone Stamp Tool in CS6 Will Not Work on Tiff Files

    All of a sudden the Clone Stamp Tool does not work when working on a tif file. Yes I get the Circle with + sign when I press the ALT Key but tool will not clone.

    Hi Trevor!
    I found out that it affects all file extensions.  Files were created after adjustments in Bridge. Layer is not locked. Opacity is at 46. Now as I reviewed your answer, I was looking at a FAQ about the same thing. Truthfully I did not know that you could reset tools.
    I found out how to reset the CSTool and voila!!! Now works fine.
    Thanks for the advice...
    Dan

  • Activate not working in scripts written 6 years ago not working now

    Hi All,
    I have a script that has been working consistently for 6 to 7 years.  Now I copied it to my new Macbook Pro running yosemite and now the activate is not working when placed before display dialog.  The script uses Illustrator and Excel and for some parts of the script these applications are brought to the front using activate.  These activates seem to work.  However, the activate does not work with display dialog.  I tried to remedy this by putting a tell me block around the code.
    I don't know if this make a difference but the script is executed through the run script command.
    Any help would be great.
    Thanks,
    Carolyn
    OS 10.10.1
    15 inch retina
    2.5 intel core i7

    Do you have the proper conference media resources set up with MRG and MRGLs?

  • SWFs published from CS6 do not work, but from CS5 they do

    I have recently begun learning how to create animations in Adobe Flash. I've been using Flash CS5. After creating my animations, I would embed them in Microsoft Powerpoint as shockwave flash objects. I would then send the powerpoint to my dad through dropbox; everything worked great.
    Then I was able to install Flash CS6. I continued saving them as CS5 projects to be consistent. I would still publish them as shockwave objects and embed them on powerpoint like before. On my computer, they all worked fine.
    I now have a powerpoint that has a combination of videos from both CS5 and CS6 on different slides (though they're all saved as CS5 files and all embedded into my ppt). When I send the ppt to my dad, however, the newest videos don't play on his computer.
    The old ones work fine for him, but the updated animations are shown in the powerpoint as black boxes, and when right-clicked, have the greyed-out text 'Movie not loaded' with no other options. In edit mode (aka when the powerpoint is on the normal, editable view) the old animations look perfectly normal, whereas the new ones are white with a black 'x' across them.
    I've scoured the web for answers, but CS6 is so new that nobody else has seemed to come across this problem. I don't know if it's a bug or if I'm doing something wrong. I also don't know if it's a problem with flash, shockwave, or powerpoint.
    It doesn't make any sense to me, since the CS6 animations are still saved as CS5 and shouldn't be treated any differently by powerpoint. This is especially true since the animations play on my computer and not his!
    Thanks for the help,
    Emily

    Did you ever solve this one?
    Would be nice to know.

Maybe you are looking for