ActionScript not working after save

Hello
I installed flash CS4 Pro on 3 computers and i have this problem:
I create a new project (CS4 + AS3), create a simple animation and put ActionScript on first keyframe. When I run this project (CTR+Enter) everything is working perfect....
BUT... when i save this project and run it once again, scripts are not working. Debugger says, that there are no scipts, console is empty, but scripts are still in the same place. (i can see them in editor). Only change i made is that i click on Save in menu and put a name in dialog.

I uploadet files here:
http://wagoon.sweb.cz/pokus-aktivita3.fla
http://wagoon.sweb.cz/pokus-aktivita3.swf
... and thanks for you help and time...

Similar Messages

Web Service do not work after save in Designer ES2 SP1

Dear all,
I am trying to migrate 8.2.1 process to ES2.
Although it have some bugs, but the process are working fine when using ES2 without any SP.
One day we installed SP1 for ES2 and hopeing for some bugs we found fixed, but find none of them fixed... oh well, so we continue the migration.
And the problem happen when we try to modify the form for some testing, we find that even we *did not* modify anything in the form, if we pressed the save button and deploy the form, all the web service related code in the form will stop working.
Anyone have any idea about this?
Thanks in advance.
Regards
Bill

Hi Paul,
Thanks for the suggestion.
Already tried to update the dataconnection by right click at data view, and choice "Refresh Data View", but that doesn't help, would like to know are there any others way to do so?
I already open a case with the support, but it seem that the engineer in APAC region have a very slow response time...
Just wonder if I can send the case to others support center with better response time.
I tried to compare the form before and after save and find that some information may missing in the post-SP1 form.
In the pre-SP1 from, I can find a <dd:dataDescription> section for every web service used in the form, but in the post-SP1 form they are missing.
I tried to add that section back and it will make the web service usable again, but the problem is I need to do that every times I modify anything, and I also need to create this section for a every new web service added to the form...
Regards
Bill

Flash CS5 ActionScript not working after 2-3mins

Hi,
I am using CS5 Design Premium and encounter a very crazy flash problem..... i used the AS3 and made an object move for 100 frames. Added a AS to stop at 50th frame. basically using stop(); for the AS. but it doesnt work when i test it. so i close and open the flash CS5 again and tested it and it worked. after about 2-3mins into using the program i didn't touch anything and test the movie again and it doesnt stop at the frame with the AS. So i tried closing the program and opening it again and tested it and worked again.....so i did a few try and error and found the software i open for the first few minutes tested the movie and it function normally but once after a couple of minutes the AS no longer worked.
can i know if there is any settings to ensure AS is being detected through out the using of the software or it is the software having some problems?

You should provide the code you're using and describe what it's supposed to be doing. While it might be a bug in CS5, it is possible the code is causing the performance issue.

Tecra M7: Tablet does not work after lid closing

Has anyone had problems with the tablet not working after closing the lid on a Tecra M7? Bios is 3.20
Doesn't seem to happen on hibernate or sleep.
I have the lid set to do nothing on close.

Hi
What do you mean with tablet not working after closing the lid?
Does the notebook freezes or what?? What happens exactly???
The close the lid settings can be set to hibernation mode or standby mode or no action.
These settings can be set in the power saver setup actions.
If you have some problems with some installed Toshiba applications I would recommend reinstalling the TOSHIBA Common Modules and the program which doesnt run correctly!
Best regards

HP SimplePass Reader Does not Work after Sleep

I have only had my laptop for a week - the fingerprint reader stopped working 2 days after I bought it. I have tried everything: removing and re-installing various drivers and software, stopping and starting Credentials Manager, unchecking the box that allows the computer to turn the reader off to save power, etc.
I have gotten it to the point where it functions when the computer is logged in, but not after sleep. It works once if you restart the computer, but after waking it from sleep it does not initialize. (no light or anything) However, if you "lock" the desktop from the start menu, the reader will log it in again. (without closing the lid or putting it to sleep)
Simple Pass version 6.0 (latest downloaded from HP.com)
Envy Dv6 7229wm
Windows 8 64-bit
Thanks

Hello hawvi,
I see that you are having problems with the fingerprint reader not working after returning from sleep mode. I would like to help with this issue but I need some information.
Can you provide the full model and product number of the computer? Here is a link that shows how to find that information.
What operating system are you using?
How long have you had the problem?
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

I downloaded CS6 and am having issues with my print driver. It is not compatible with the HP 2600n and have tried to download drivers given to me by adobe ( (Jupiter 3) but it is not working. after a few days. Its a temporary fix and is still looking for

I downloaded CS6 and am having issues with my print driver. It is not compatible with the HP 2600n and have tried to download drivers given to me by adobe ( (Jupiter 3) but it is not working. after a few days. Its a temporary fix and is still looking for the HP driver when i boot up. It also will not save in any print or postscript format. Does anyone know how to fix?
Currently use a Mac with the latest Mavericks 10.9.4

Oh boy! Acting kind of weird seems to be an understatement, aquaequus!
What type of troubleshooting were we able to do with you? I want to make sure that we can get some sort of resolution for this problem.
It is quite possible the battery door may get your phone in working order again. I'm not sure if the store has it in stock, but it is available in our warehouse for $14.99 which can be ordered via customer service.
Tamara H.
Follow us on Twitter @VZWSupport

My laser jet 100 color MFP M175nw is not working after windows 8.1 upgrade,

my laser jet 100 color MFP M175nw is not working after windows 8.1 upgrade, driver on your website fails to setup at 83 % with an error message

Welcome to the HP Forums MillaMagia,
I see by your post that the USB isn't being recognized.
I can help you with this issue.
Are you using the same USB cable? (known good USB cable)
You want to use the normal USB slot 2.0 cable and not the latest USB 3.0.
USB 3.0 are supposed to be backwards compatible.
Try another USB port on the Laptop, some of the USB ports are more powered then others.
I have provided a document to see if the printer is partially recognized in the device manager, which is causing the printer not to be recognized again. (the uninstall from the CD should have removed the entry and the printer from the registry)
Leave the printer turned on and the USB cable connected directly to the computer and the printer's power cord directly into a wall outlet.
How do I get into Windows Device Manager?
Here is a document for Identifying problems in Windows Device Manager.
Check to see if there are any hardware driver conflicts, you might see a ! mark or a red x beside a device with a conflict or unknown device, look under universal serial bus controllers, look for USB printing support or mass storage device, delete the entry by right clicking and select uninstall, OK.
Let me know how it was listed. (screen shots welcome)
If this is a Laptop then check the power management settings.
Access the device manager. Windows 8-How do I access the Device Manager.
Select universal serial bus controllers from the list, for each USB root hub, right click and left click on properties, for power management remove the check mark for "Allow the computer to turn off this device to save power". It allows the computer to limit or turn off power for this device.
Disconnect the USB, run the full uninstall and reinstall the printer software again.
If you need further assistance, let me know.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

PCI wireless card does not work after restart - FM2-A55M-E33

Installed TP-LINK WN751ND wireless PCI card onto FM2-A55M-E33 motherboard. The card works fine after cold start, but does not work after restart. Windows recognises the card, but it gets code 10, cannot start.
BIOS is updated (v.11.1), as well as drivers and Windows 7 64.
I suspect that this might be the issue: Incorrect ASPM Transitions on the GPP Interface as found in ChipsetMotherboard_TechDocs/48671.pdf on AMD's official support site.
Does anyone know more about this issue?

Great! I've done that and now my card shows up. Thing is, when I try to get an IP address, it won't work. Here is the command output:
ieee80211 phy0: wl_ops_config: change monitor mode: false (implement)
ieee80211 phy0: wl_ops_config: change power-save mode: false (implement)
ieee80211 phy0: wl_ops_bss_info_changed: qos enabled: false (implement)
And then it times out and no IP is assigned. The thing is, wpa_supplicant stays alive after this time out, and I am unable to kill it (killall -9 wpa_supplicant won't kill it). At this point if I try to reboot the machine, it will stop at 'Rebooting' and won't go anywhere. If I turn off the wireless card in its switch Linux crashes. If I try to get an ip again (by running dhcpcd) the command will hang and not return to the shell anymore.
I am unable to find any useful information in the logs.
Got any more suggestions?
Thanks! (And sorry to disturb so much)

Some keybaord keys not working after suspect virus on Tecra A

Apostrophe, delete, semicolon and end keys not working after a suspected virus attack. I found record of the same problem on the net but apparently this guy fixed his problem after he found scroll lock or num lock on.
This is not the case here but there is something going on with numlock - register shows 2 and not 0. change to 0 but when reboot back to 2 again.
Suspect changed back by bios. I thought i couldnt get to bios because DEL key not working but found ESC works.
Tried to reset default values for bios but then cannot save and exit as this required the END key to work.
I was running XP at the time of the (suspected) attack and could not rectify the problem so put the computer back to the OEM status which i hoped would help - it did not, same problem so rather than install all the software on the computer again with XP i upgraded to Windows7 - fresh install.
Still keys do not work - it was a real pain to start with as my computer was set up to ctl+alt+del to log in and i had to do this with on screen keyboard - XP - this also showed that numlock was on before and after windows boot.
The reason i suspect a virus - my wife was watching one of her tv shows on line from home country (another toshiba laptop) and i needed to use that laptop for something else so i asked her to use mine - later on we turned the laptops off and in the morning turned tham back on again, the other laptop with AVG virus protection flagged several hits and this one with (FAMOUS and completely up to date) Norton flagged nothing - once i got into it using on screen keyboard.
Problems with this computer was found after scanning with a different antivirus.
Anyway - i am left with 4 keys that do not work on my keyboard (actually they did work after i logged into the computer for the first time but i had to hold them in for a long time - and then next time i rebooted, not work at all and havent ever since)
Any assistance here would be greatly appreciated, i have been working on this all weekend with no joy at all.
Thanks in advance.

Thanks Xardas,
I have essentially done both - tried Toshiba OEM status found on a small partition of the toshi hard drive - no good - then did a fresh install of Windows 7 - still no good
You know - as cunning as it sounds - i cannot reload the default settings in BIOS as it requires the END key to work so i can Save & Exit - all i can do is Exit Without Save - i sort of feel snookered at the moment.
Toshiba got back to me today and said that i have tried everything they would have (yeah for sure) and to take my machine into a service centre for a hardware check - yeah right on boys!
Check out this guys post below found on Kioskea.net - getting close to a year ago...
ms ml - Nov 10, 2009 12:52am GMT
Hi there, I was hoping that you might be able to help me with the problem that I seem to be having with my Toshiba Satellite Laptop Keyboard too. For a few days now I havent been able to use a few of the keys on my keyboard, including (1) delete (the backspace key is still working though), (2) colon/semicolon, (3) apostrophe/quotation marks and (4) end (the home and PgUp and PgDn keys are still working though). Any suggestions?
Identical to my problem....obviously this guy had the same problem as well...see below - same thread.
yab - Feb 9, 2010 4:47am GMT
hi did you ever figure this out? i have the same exact problem...
However, i was not able to solve my problem the way this guy did - my scroll lock is not activated - it seems to work ok (on and off) i tested it using Excel to move around the cells.
yab ms ml - Feb 9, 2010 7:57am GMT
Nevermind. For me it was scroll lock. My apostrophe, semicolon, and delete keys are alive and working again. I hope you have the same easy fix.
Incidently - never hear from the first guy again - probably ended up being his scroll lock.
all sugestions welcome - sorry my smily face has no eyes -) guess why!

Why is the scroll function not working after accessing the voice feature in settings?

Why is the scroll function not working after accessing the voice feature in settings?

For some prerecorded audio files the Transpose slider will not work reliably. I found no clear pattern, when it does and when not.
If all fails, create a loop from the audio file. Select the region in the track and use the command "File: Add region to Loop library".
Set the current key and tempo, name the loop, and save the loop.
Now add it from the loop browser to a new track and delete your old track. The search field in the Loop browser will help you to find the loop quickly.
You will be able to transpose the sample as described above, like a regular loop.
For example - a audio file turned into a loop and transposed:

Mic Jack not working after Driver Update, Console unavailable, can't install

LMic Jack not working after Driver Update, Console unavailable, can't install? I've had nothing but problems after downloading the latest updates via the auto-updater.
I'm currently using the Creative SB X-Fi Pro Series card. I've had it for close to 6 months and have not had any issues until I ran the auto-updater last night, and while it downloaded over 250Mb of updates, all of them failed to install as described below.
I'm running on Windows Vista Ultimate, 64-bit
My main issue is the fact that my microphone is no longer working. I've done a lot of searching and I think the problem has to do with flexijack not being a microphone jack, but instead is an 'in-line' jack. I can no longer find my audio control console, which allows me to switch between gaming and entertainment modes, ect. The solution I found on the KB says that you can switch the blue jack on the back of the card from an in-line jack to a mic jack within the Audio console. I tried downloading it, but while going through the install, I get an error saying the files could not be found and a prompt which asks for a disk or file location. The same thing pretty much happens with all of the items I attempted to download and install.
I was able to run console fine, as well as use my mic yesterday before I attempted any updates. I attempted the updates because since I've had the card, I've had issues where after I exit a game, all my sound will become crackly and static. Before, I would simply open up the console and switch back-and-forth from gaming to entertainment, which would fix the problem most of the time. If that didn't work, a restart would fix it, but now I've opened up a whole new set of issues.
Any help would be greatly appreciated.
I also want to say that the support tickets should not require a serial number to submit a new ticket. My product is registered, so I got rid of the box which contains all that information, leaving me at the mercy of these boards...

Hello all. Fisrt of all, this are my specs: Yoga 2 pro 13". WiFi card: Intel(R)Dual Band Wireless-AC 7260. I bought it from Best Buy on November 27, 2014. If you aquired your Yoga before this date, you may have the single band WiFi card. As many of you have experienced, I also had a bunch of issues with my WiFi connectivity and this is how I was able to solve it. At least it has been a couple of days that I haven't had any issues. The first symptom was the usual connection drops every X amount of time. For me it was about every 2 hours. I first unchecked the "Allow the computer to turn off this device to save power" option in the Power Management tab of device manager and disabled U-APSD support in the Advanced tab of device manager. This action did not solve the problem. I then downloaded and updated the driver from the Intel web site (http://www.intel.com/p/en_US/support/detect) and this seemed to solve the drops; however, a new problem arised: Everytime my Yoga would wake up from sleeping mode, all my wifi networks were gone and the adapter showed as disabled in Device Manager. I would have to anable it to have my networks back. It was a solution but a pain the butt to have to do this everytime. After hours of reading post after post in several forums, I read a repy from Lenovo asking to try leaving the "Allow the computer to turn off this device to save power" CHECKED if you were using the latest version of the driver. I went back to device manager and checked it back and that seems to have solved the problem. So far I haven't had any drops and everytime my laptop comes back from sleeping mode the WFi connection is still there! Here is a recap of how everything ended up: -The driver version I installed is 17.1.0.19-The driver date is 7/21/2014-In device manager|Advanced, U-APSD support is Disbled.-In device manager|Power Management, "Allow the computer to turn off this device to save power" is checked. Hope this helps somebody else.

Zsh completion can not work after re-login

I follow http://www.linux-mag.com/id/1106/
my .zshrc
autoload -U compinit
compinit
zstyle ':completion:*' verbose yes
zstyle ':completion:*:descriptions' format '%B%d%b'
zstyle ':completion:*:messages' format '%d'
zstyle ':completion:*:warnings' format 'No matches for: %d'
zstyle ':completion:*' group-name
if [ -d ~/zshfunc ] ; then
r() {
local f
f=(~/zshfunc/*(.))
unfunction $f:t 2> /dev/null
autoload -U $f:t
fpath=(~/zshfunc $fpath)
autoload -U ~/zshfunc/*(:t)
fi
There is a ~/zshfunc/_fossil script, but it can not work after re-login.
The temp workaround is re-type 'compinit' manually.
fossil <tab> # will use file name as completion
compinit
fossil <tab> # will show commands for fossil
Last edited by dlin (2014-11-10 00:47:14)

Hi
Thanks for the tip. However, I elected not to save the XP SP2 uninstall files when I installed SP2. so I appear to be stuffed.
There must be some creative drivers that work with an audigy with XP SP2 installed!
If not then its either re-format the Hard Dri've and re-install everything again (Doh!!) or get another (not Creative Labs) soundcard.
this is really bugging me.
Zonker

My new iPad sound is not working after updating to ios 6.1

My new iPad sound not working after updating to ios 6.1. Headphones are working fine. I tried all the troubleshoot. can anyone know the answer, plz share with me

Hi,
I have exactly the same issue as everyone above. I only get sound through the slider on the ringtone in settings and through my headphones. I do not get any sound anywhere else at all.
I Have tried:
- Updating to iOS 6.1.3
-re starting the device
-checking that the device is not muted. My slider switch is set to mute rather than lock and is unmuted.
-going into general settings and reset all settings
-the device reset several times (waiting until I saw the all important apple logo)
-removing the last few apps I installed.
Nothing at all has worked, please help!
New iPadiPad

IPhone 5s not working after voice over turned on

iPhone 5s not working after voice over turned on

Hello ss1997,
Thanks for using Apple Support Communities.
To troubleshoot this issue where your iPhone will not boot past the Apple logo please follow the steps in the article below.
iOS: Not responding or does not turn on
Take care,
Alex H.

Iphone 4 personal Hotspot not working after update to IOS 7.1 India BSNL cellular

Iphone 4 personal Hotspot not working after update to IOS 7.1 India BSNL cellular

BSNL is not a supported carrier. Personal Hotspot requires carrier support and provisioning of the account to enable it. iOS 7.1 disabled the ability to manually configure Personal Hotspot on unsupported carriers.

ActionScript not working after save

Similar Messages

Maybe you are looking for