Actiontech MRI424WS number of connections possible?

I have the actiontech router for my Verizon FiOS and several items that need to be connected to it from my xboxes, PS3 laptops and mobile devices. I foudn a setting in the FiOS router that states "number of connections" and goes from 1 to 10.
The question I have is that from time to time one of our laptops seems to never be able to connect to the internet (Vista shows local access only). Is this because I have too many items on the router? Is there a way around this limitation. If I had know this I would never have signed up for this.
Is the only way around this to buy another router and hook it in sequence to the actiontech?
Thanks for your responses.

Hubrisnxs wrote:
where exactly do you see that? like on what page or after clicking what items in the router?
the router actually supports upto 254 some odd connections.
physically out of the box 4 hardwired connections and any number of wireless that fit within that configuration.
The screen you are looking at MIGHT be the number of pc's that can be logged into the verizon interface at one time, and not the amount of active connections.
Wow, that's a little scary. I have a Westell 9100Em and I currently show
Connections Active Connections: 258 Approximate Max. Connections: 154000
We must be talking a different connections page, there can't really be that difference between the 2 routers can there?
I accessed the connections screen by following the router users guide
I currently have 14 devices connected
Verizon FiOS Router (Model 9100EM) User Guide
13.10 Connections
If you select Firewall Settings in the top navigation menu and then select Connections in the left submenu, the
following screen will appear.
The connections list displays all the connections that are currently open on the firewall, as well as various details
and statistics. You can use this list to close undesired connections by clicking the “X” icons. The basic display
includes the protocol type, the different ports it uses, and the direction of the secured traffic.
• Active Connections—this value represents the number of active concurrent connections.
• Approximate Max. Connections—this value represents the amount of additional concurrent connections
possible.
• Connections Per Page—use this drop-down list to select the number of connections to display at once.
Click the Advanced button to display a more detailed connection list.

Similar Messages

Query: The number of connections possible on APEX

Hi all,
Hope you all are doing good.
there is one query,
Does the number of connections to apex depends on database memory ???
Is there any limitation on number of connections at the same time ?
i have one application,
APEX 4.1
DB 11.2.0.2
when it was launched.., people tried to login and as soon as they logged in the poratl/application went down. had to bounce the DB to get it back.
was clueless on what would be the reason for this behavior.
how do i make sure this would not occur again..,
thanks and regards,
Littlefoot

Hi Dietmar,
i have the same assumption, but the problem here the user is facing is, they have used some java scripts to upload the excel sheet and when uploading it the apex portal goes down.
they are still testing it, expected user to login is around 600 at the same time.
From the db side :
SQL> sho parameters sga
NAME                                 TYPE        VALUE
lock_sga                             boolean     FALSE
pre_page_sga                         boolean     FALSE
sga_max_size                         big integer 3808M
sga_target                           big integer 0
SQL> sho parameters job_queu
NAME                                 TYPE        VALUE
job_queue_processes                  integer     1000
SQL> sho parameters large
NAME                                 TYPE        VALUE
large_pool_size                      big integer 0
use_large_pages                      string      TRUE
SQL> sho parameters java
NAME                                 TYPE        VALUE
java_jit_enabled                     boolean     TRUE
java_max_sessionspace_size           integer     536870912
java_pool_size                       big integer 1424M
java_soft_sessionspace_limit         integer     536870912they are getting the error : ORA-04031: unable to allocate 91992 bytes of shared memory
how do we remove the error..,
any help on this.
additional details : server has 12GB ram.
thanks and regards,
littlefoot

How do I configure the number of connection in the pool for webservice axis

Hi
How do I configure the number of connection in the pool using xml.
We are using axis 1.4 and commons-httpclient-3.0.1Is there any way we can do it using the client-config.wsdd file.
We do not want to do any modification in the code for this.
Is it possible to set socket timeout also in the wsdd file.
Your resolution will be really helpful for us.
Thank You
Ottran

Export them at a smaller size:
File -> Export - not the options at 'Size'
Regards
TD

Problem with reached maximum number of connections to database

Dear Experts,
Our Production system was not responding properly last week.
The below was the reply from the Basis team.
"It seems that we have again problem with reached maximum number of connections to database. We have extended this number to 100 this year and now it seems that it’s not enough again. It seems that something is running on Production, which takes over too many connections."
They have increased the number to 200 as a work around.
Do we have any means to find out, which component or application is causing the issue.
Please advise me if any better way is available to correct the issue.
Please see the below trace.
From default trace:
======
Caused by: com.sap.engine.services.dbpool.exceptions.BaseSQLException: ResourceException occurred in method ConnectionFactoryImpl.getConnection(): javax.resource.R
esourceException: (Failed in component: dbpool, BC-JAS-TRH) Cannot create connection. Possible reasons: 1)Maximum allowed connections to DB or EIS is reached. You
can apply CSN Note 719778 in order to check and resolve connection leaks. 2) Configuration to DB/EIS is wrong or DB/EIS is temporary unreachable. 3) Connections ar
e not enough for current load.
        at com.sap.engine.services.dbpool.cci.ConnectionFactoryImpl.getConnection(ConnectionFactoryImpl.java:60)
        at com.sap.security.core.persistence.datasource.imp.J2EEConnectionPool.getConnection(J2EEConnectionPool.java:205)
        ... 61 more
Caused by: javax.resource.ResourceException: (Failed in component: dbpool, BC-JAS-TRH) Cannot create connection. Possible reasons: 1)Maximum allowed connections to
DB or EIS is reached. You can apply CSN Note 719778 in order to check and resolve connection leaks. 2) Configuration to DB/EIS is wrong or DB/EIS is temporary unr
eachable. 3) Connections are not enough for current load.
        at com.sap.engine.services.connector.jca.ConnectionHashSet.match(ConnectionHashSet.java:230)
        at com.sap.engine.services.connector.jca.ConnectionManagerImpl.allocateConnection(ConnectionManagerImpl.java:343)
        at com.sap.engine.services.connector.jca.ShareableConnectionManager.allocateConnection(ShareableConnectionManager.java:54)
        at com.sap.engine.services.dbpool.cci.ConnectionFactoryImpl.getConnection(ConnectionFactoryImpl.java:52)
        ... 62 more
Caused by: com.sap.engine.services.dbpool.exceptions.BaseResourceException: SQLException is thrown by the pooled connection: com.sap.sql.log.OpenSQLException: No c
onnection to data source SAPEPPDB available. All 100 pooled connections are in use and 70 connection requests are currently waiting. The connection pool size might
need to be adjusted.
        at com.sap.engine.services.dbpool.spi.ManagedConnectionFactoryImpl.createManagedConnection(ManagedConnectionFactoryImpl.java:192)
        at com.sap.engine.services.connector.jca.ConnectionHashSet.match(ConnectionHashSet.java:221)
        ... 65 more
Caused by: com.sap.sql.log.OpenSQLException: No connection to data source SAPEPPDB available. All 100 pooled connections are in use and 70 connection requests are
currently waiting. The connection pool size might need to be adjusted.
======
Thanks and Kind Regards,
Jelbin

Stop all instances(including DB) and start again, Hope it should work.
It may happened that jar has not been synchronized with the database and may be version mismatch with the java.
719778 - Data Source fails to return connection
1650472 - Transactions are interrupted due to database connection periodically failing to establish
1138877 - How to Deploy External Drivers JDBC/JMS Adapters
Change the connection pool so that it can connect to DB as per the note 719778
Regards
Vijay Kalluri

The maximum number of connections per source ('20') for this connector has been reached by this source IP address

Receive connector 'Connector Name' rejected an incoming connection from IP address "IP of our load balancer". The maximum number of connections per source ('20') for this connector has been reached by this source IP address.
I understand that I can up the limit - however, I'm wondering if there is a way to up the limit for ONE specific IP (our load balancer)
TAG

It does not look like you can up the limit for a specific IP but you might be able to create a separate receive connector for that IP address (and then change the limit).
That is just a thought. Others may have more input on why you may or may not want to do that in practice.
What SMTP traffic would not be coming from the load balancer?
Is the objective to *not* allow some other (possibly malicious) source from creating excessive connections to the server?
Otherwise, this is a good discussion about the different parameters that must be considered if you do decide to adjust the values (changing one may not suffice):
http://letsexchange.blogspot.com/2012/04/receive-connector-rejected-incoming.html
Nuno Mota's blog (MVP)
Please mark as helpful if you find my contribution useful or as an answer if it does answer your question. That will encourage me - and others - to take time out to help you.

Maximum Number of Connected Wireless Users?

I was reading a wireless document that shows a design where 3 WAPs on a 802.11b/g network for 180 users.
Best practices talk about 15 to 20 users per Access Point, which is what we typically do anyway.
So, my question is can the Cisco 1230 or 1240 Access Points (as an example) support like 50 to 60 users per Access Point within range?
I understand that the WAP wireless network is a shared (like a hub) network thus bandwidth is shared among all connected wireless users.
So, understand those considerations, but I want to know if those Access Points can actually support that number of connected wireless users or if there is a maximum number of associated users?
Thank you!

The theoretical maximum is 2048. As part of 802.11, however, some number of
these 2k addresses are reserved bringing the IEEE maximum down to 2007.
Although the AP motherboard has memory capable of handling 2007 users, the
radio utilized in our 1200 Series AP has memory limitations which hold the
maximum number of client associations to 255.
The number of 255 is active associations, though the cam table can
contain 2048 entries because of the memory size, the number restricted
for actual active association is 255.This number is still far too large for sensible
networking but what is possible. Remember that WLAN is shared media, all users have to try
to get access to the media by waiting until it is free and then sending a request to
reserve the media for the duration of the frame size that they want to
send. If the air is busy then you have to wait a random time and start
again. So if you have too many users waiting they can end up waiting a
very long time - sort of traffic jam effect at a congested junction, one
more car and the traffic seems n times worse.I dont know as to how the number 255 was
arrived at but it is largely irrelevant as 255 is still too large to be practical for
active associations, we recommend 25-30 for most design work.

Limiting Number of connections from a single user

Hi ,
I am using 9.2.0.6 DB, i need to restrict the number of connections from a single user to 100.
Currently the user is having DEFAULT profile, this profile is having several other users associated to it.
What are all the available options to create restriction for a single user.
Create a new profile and add the user to the New profile is the option i have.
In that case can i create a copy of the Default profile and changing the SESSIONS_PER_USER to 100? will it work.
Appreciate your suggestion.
Thanks,
Sathis
Edited by: user7043544 on Feb 22, 2010 9:46 PM

Hi,
Since it is a default profile you can just create a new profile with the resource type you are interested it.
And if you want to copy the existing profile extract its ddl through below command, change the profile name and required resource and run against the db.
select dbms_metadata.get_ddl('PROFILE','<Profile_name>') from dual;Regards
Anurag

Number of connections made to database at a given time

Hello,
I would like to know the number the history and current number of connections made to the database via oracle application server at a given time. I see Active Connection when I click on HTTP Server, but I am not sure what that means. Does that mean the number of users on the site or does it mean the number of connections made to the database?
Also is there a way to find out the history of connections? Also is there a log file that all this information is recorded into?
Thanks for your help in advance.

Hi
Active Connections in HTTP Server -> Number of users connected to your site (active + inactive)
You can get information about database connections in v$session, or , in Enterprise manager -> OC4J container -> Home
If you are using datasources at application level you can get information about pooling in
Entreprise Manager -> 0C4J Container -> Application (select application ) -> DataSources
If you have datasources at OC4J container level you can get info in Entreprise Manager -> OC4J container -> Administration -> datasources
Best Regards
Rui Madaleno

How to find out number of connections to database?

Hi,
How can I find number of connections connected to the database 4 hours ago. For examply, if current time is 5PM and I want to see total number of connections connected to database (and from what user?) in between 1 and 2 PM, is there a way to find that out?
I see v$session has a column MACHINE from which I can use count function to check the # of concurrent connections but I am not sure how to check the # of connections that happend few hours ago. Any suggestions?
--MM

you should have audit on .. and create logon trigger and make entry in the tabe ..that would give you .
--Girish

Max. Number of connections in use Nokia N93

Hi
I am trying to connect to wireless router using WEP. I have configured the access point and when I try to connect with Opera Mobile 3.6 an error occurs:
Max. Number of connections in use. Close na active connection first.
Note that my phone is not woring in dual mobe but GSM only.
When I try connecting with the Phone's browser:
WLAN: Unable to connect. WLAN Network not found
Lumia 920 OS version: 8.0.10521.155
FW revision number: 3047.0000.1326.2002

Every time you up-date the firmware, you get from your network opperator the settings for various access points (Internet, MMS, Vodafone Live, whatever....) This leads to duplicates (or even mode) access-points. Moreover, some of these access points are saved as "default" access point in various applications. This is where the mess starts.
To clean-up the mess, you first have to REMOVE all duplicate access points and keep only one access point for each purpose: Internet connection, MMS, Live (if you are are on Vodafone), etc. After this, you will probably get messages from various applications to define a new default access point. And things will be sorted our automatically.
Hope this helps, even though it might not be simple for some.
2110i, 6150, 6210, 6310i, 6670, 9300, 9300i, E90, E72, HTC Touch Pro2, Samsung Galaxy S, Samsung Galaxy S II

Maximum number of connections in use. Close an act...

Hi everyone.
I try to connect my N95 to internet, using "One Touch Access" and USB. It used to be working ages ago! but now, it is impossible. it gets connected with the phone, but when i want to open a web page, it say "maximum number of connections in use. Close an active connection first", and forces me to close my Modem connection, and everything gets disconnected...
what should i do????
help please...

97268450 wrote:
when i open face book application,the same problem maximum number of connection in use. Close an active connection first. i have nokia 5233
This issue was already answered by other threads. You can click here and here for more information.
Hope this will help you.

Maximum number of connection in use. Close an acti...

When I am using nokia maps . A popup message comes in as (maximum number of connection in use . Close an active connection) and an option yes or no . When I press yes . The active connections are displayed there are only one active connections when it is disconnected . An another message comes in as connection needed to continue nokia maps . And when use no message popup again and again and I can't use maps .... I have formatted phone memory and memory card several times and I have updated phone program also . Can you please help me .
i am using Nokia 5800xpressmusic . model-5800d-1.
tankyou
Solved!
Go to Solution.

Hi virajkumar
Please bear in mind two processes involved here, OVI Maps application which may either be "Online" or "Offline" (spanner icon > Internet > Connection) and Assisted GPS feature utilizing a network access point (Menu > Applications > Location > Positioning > Positioning server > Access point).
Happy to have helped forum in a small way with a Support Ratio = 37.0

Maximum number of Attribute dimensions Possible in BSO Cube

hi,
i have two simple queries :
1 - What are the maximum number of Attribute dimensions Possible in a BSO Cube.
2- How many attribute dimension can be associated with one base Dimension.
hope to get reply soon.
thanks in advance.
Regards
Anubhav

No Limits are defined as such:
How many Maximum number of Dimensions can create ?
Even in the Dbag, it says "many":
A base dimension member can have many attributes, but only one attribute from each attribute dimension.Cheers..
Rahul S.

Using iMessage 8.0 with Mavericks to send sms message to my friend who has an iPhone. Only allows me to log in under AIM, YAHOO, GOOGLE, or BONJOUR. I don't want to do any of that. Just my phone number. Is this possible?

Using iMessage 8.0 with Mavericks to send sms message to my friend who has an iPhone. Only allows me to log in under AIM, YAHOO, GOOGLE, or BONJOUR. I don't want to do any of that. Just my phone number. Is this possible?

Hi,
The first run of Messages will ask you to enter an Apple ID to "register' with iMessages.
If you do not do this but open the App and look in Preferences > Accounts then you will see the iMessages account and the Bonjour Account which will not be activated.
Neither of these two account can be deleted. (even if not being used)
If you then press the + icon to add you will get the choices you posted.
To iMessage you need to "register" and Apple ID with the iMessages service.
As Diane then points out you can link this to your iPhone number.
This "syncs" (Displays on all devices) the various iMessages sent to either iPhone or Apple ID
You can then chose on both iPhone or Mac version how or which ID/Number is going to be used to "Start the conversations from"
I have my Mac version set to start from my Apple ID and the iPhone from it's number.
At this moment the Mac version cannot send SMS text messages to an iPhone.
This is apparently coming with iOS 8 and OS 10.10 (Yosemite)
An AIM account can send SMS Messages but only to a limited number of USA based phone users on these carriers.
(Basically you add a phone number with country code +1 as a Buddy to your List)
Mocked up number (It not really an auto responder although you do get sent back and Error message about it not being valid)
8:37 pm Sunday; July 13, 2014
 iMac 2.5Ghz i5 2011 (Mavericks 10.9)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad

Number of connections unused in a weblogic pool ?

Here is my question :
Do you know a way to know the number of connections unused (or the number of connections in use) at a particular moment in a weblogic connection pool ?
Thanks a lot !
And sorry for my poor english...
Jerome.

Presumably this is for server monitoring rather than because you are going to do anything with it in the server itself.
If it was mea I would look in the management interface. You might have to drill down a bit and just plain guess.

Actiontech MRI424WS number of connection​s possible?

Similar Messages

Maybe you are looking for

Actiontech MRI424WS number of connections possible?