Activate a call forward with a Third-party SIP Device or with a analog device

Hi,
In a CUCMv9, how i can activate a call forward (all, busy, no anwser...) with Third-party SIP Device or with a analog device connected to a fxs?
I want to activate a call forward like a Alcatel or Aastra PBX with a code.
For exemple, i pick up the phone, with the code *95 followed by the destination number and hangs up the phone. And use the #95 for désactivate this call forward.
It's possible?
Thanks.

No codes for 3rd party SIP phones, no way to do it. Or for that matter, not even for Cisco Phones, other than CFA.
Anything besides CFA needs to be done via CCMadmin or CCMuser for any kind of phone.
For FXS that's only doable if you're running SCCP
http://www.cisco.com/en/US/partner/docs/ios/voice/fxs/configuration/guide/fxssccpsplmft.html
HTH
java
if this helps, please rate
www.cisco.com/go/pdihelpdesk

Similar Messages

  • RTP Media Stream with "Third Party SIP Device" always through CUCM

    Hello,
    i have i quite strage problem on one of my customers locations:
    we have a cucm 7.1.5(SU4) with the cucm in the datacenter. And we have a small location(branch office) which has a small wan connection to the datacenter (1MBit/s).
    In this location we have several Kirk (Polycom) Dect phones which register as "Third Party SIP Device - Basic" on the CUCM.
    (The problem is the same if i use the X-Lite SIP Client instead)
    When this SIP Phones or the X-Lite Client dials a internal Number of the same location the RTP Media Streams goes directly from the SIP Client to the phone. But if they dial an external number the RTP Stream goes from the SIP Client via the wan connection to the CUCM and back via the wan connection to the 2901 H.323 Gateway (on the same location).
    and of course if i now start a big download or upload i'm no longe able to complete the phone call because we have no QOS on the wan connection, because we don't want to make calls over this connection.
    When i look at the Sniffer files with Wireshark i see that the CUCM sends his own ip adresse in the SDP Header for the RTP Stream to the SIP Client. And this of course is wrong because the RTP Stream should always reside on the branch office.
    i tested this in my lab (CUCM 8.5) and it is the same. i used the "Standard SIP Profile" and a Basic Third Party SIP Device"
    The SCCP Phones on the same location which are configured with the same Region, Location, Device Pools, Media Resources and which use the same Gateway for external calls do not have this problem.
    In the Gateway configuration "MTP Required" is not activated and i tested it in my lab with some Cisco SIP Phones (9971) and they are also not affacted with this problem.
    any ideas?

    do you have a SIP trunk to the external devices with MTP required checked ?

  • CUOM with Third-party SIP Device

    Hi everyone,
    I have installed CUOM in environment with CUCM, Cisco IPPhones (SCCP), and IPPhones (Third-party SIP Device), I can monitor CUCM and SCCP IPPhones but the Third-party SIP Device can't be monitored with CUOM, Please someone have a solution for this issue
    Thanks in advance,

    do you have a SIP trunk to the external devices with MTP required checked ?

  • Third-party SIP Device (Basic) video calling

    Hi,
    I want video calling with third-part SIP device to register CUCM 8.6. But my sip phones rejecting video calls. (there is no problem, audio calling...)
    I'm doing the same process with elastix ip pbx smoothly.
    Help me !!

    ip phone codec h264 , h263

  • MOH for third party sip phones

    Hello , 
    I using CUCM version 9.1.1.2000-5  . 
    Does this version support MOH for third party sip phones ? 
    Thank you 

    Hi,
    I couldn't found better piece of information which list all cases how MoH is implemented for various terminals and hence thought of testing the same. My observations;
    SCCP phone -> Hold -> SIP Phone -> MoH plays to SIP phone
    SIP Phone -> Hold -> SCCP phone - > Doesn't play MoH
    SIP Phone -> Hold -> SIP phone -> Doesn't play MoH
    Please note that I have checked with both Xlite and 3CX, results are same.
    I have verified in wireshark also,  call manager is not sending RTP packets to held party when call is hold by third party SIP phone.
    Checked in CUCM 9.1
    Thanks
    Vivek

  • Incoming calls issue in Third Party SIP Phone

    Hi,
    Yesterday I configured my third party sip phone which is yealink in this case on cucm and successfully registered it with cucm, despite of registration i have some calling issue in this phone. I am able to make outbound calls from this phone to any other phone however issue is related to inbound calls.I tried calling its DN from anywhere but call disconnect after sometime. Also didnt get any proper sip session trace in RTMT. Kindly suggest some step to sortout this issue.
    Thanks

    Dear Manish,
    Call normally dicsonnected after 30-40 sec with termination code 102 in session trace. PFB SDI  trace with 5030 is Thirdparty sip phone and 5033 is c7945. Looking forward for your suggestion.
    CallingPartyNumber=5033
    |DialingPartition=
    |DialingPattern=5030
    |FullyQualifiedCalledPartyNumber=5030
    |DialingPatternRegularExpression=(5030)
    |DialingWhere=
    |PatternType=Enterprise
    |PotentialMatches=NoPotentialMatchesExist
    |DialingSdlProcessId=(0,0,0)
    |PretransformDigitString=5030
    |PretransformTagsList=SUBSCRIBER
    |PretransformPositionalMatchList=5030
    |CollectedDigits=5030
    |UnconsumedDigits=
    |TagsList=SUBSCRIBER
    |PositionalMatchList=5030
    |VoiceMailbox=
    |VoiceMailCallingSearchSpace=PT-LHR-LOCAL:PT-Local:Unityvmpt:PT-F6-Local:PT-ISL-LOCAL:PT-KHI-LOCAL:PT_Operator_LHR:PT_Operator_KHI:PT_Operator_ISL
    |VoiceMailPilotNumber=7103
    |RouteBlockFlag=RouteThisPattern
    |RouteBlockCause=0
    |AlertingName=Syed Ahmer
    |UnicodeDisplayName=Syed Ahmer
    |DisplayNameLocale=1
    |OverlapSendingFlagEnabled=0
    12:17:38.028 |//SIP/SIPUdp/wait_SdlSPISignal: Outgoing SIP UDP message to 172.16.200.21:[5062]:
    [23928282,NET]
    INVITE sip:[email protected]:5062 SIP/2.0
    Via: SIP/2.0/UDP 10.100.200.11:5060;branch=z9hG4bK1ca0cc6e317649
    From: "Syed Ahmer" ;tag=8787406~039e2a80-8561-4586-8954-d01ed2aa12c8-246211918
    To:
    Date: Thu, 30 Jan 2014 07:17:38 GMT
    Call-ID: [email protected]
    Supported: timer,resource-priority,replaces
    Min-SE:  1800
    User-Agent: Cisco-CUCM8.5
    Allow: INVITE, OPTIONS, INFO, BYE, CANCEL, ACK, PRACK, UPDATE, REFER, SUBSCRIBE, NOTIFY
    CSeq: 101 INVITE
    Expires: 180
    Allow-Events: presence
    Send-Info: conference, x-cisco-conference
    Alert-Info:
    Contact:
    Remote-Party-ID: "Syed Ahmer" ;party=calling;screen=yes;privacy=off
    Max-Forwards: 70
    Content-Length: 0
    |14,100,50,1.14103336^10.163.14.4^SEP00230432C828
    12:17:38.028 |EnvProcessUdpPort - EnvProcessUdpHandler::fireSignal() varId = 0|14,100,50,1.14103336^10.163.14.4^SEP00230432C828
    12:17:38.028 |EnvProcessUdpHandler::fireSignal - SEND: index = 0, handler = 0xaf299320|*^*^*
    12:17:38.028 |EnvProcessUdpPort::fireSignal - SEND, destination = 172.16.200.21:5062|*^*^*
    12:17:38.028 |EnvProcessUdpPort - EnvProcessUdpHandler::send(buff, 850, 172.16.200.21:5062)|*^*^*

  • Video call from Cisco 8945 SCCP to Polycom VVX 1500 Third party Sip Phones between intercluster trunks is not working

    Dear All,
                   We have two cucm Clusters in Different Locations between that clusters i created
    Inter-Cluster Trunk (Non-Gatekeeper Controlled) Now all are working fine Between Clusters
    audio calls & Video calls between sccp 8945 phones  , but iam facing a Problem with third party
    Video Phones (Polycom VVX 1500 ) Third Party SIP Phones located in second cluster, From 1 st cluster cisco 8945 Video
    phone to  2nd cluster Polycom Video phone all calls are works for voice call only, but no video ,
    Please Suggest me Solution.
    Thank you,
    Sriman

    Try setting up a SIP trunk between the two clusters and set a route patten just to the VVX 1500 and check how that goes. 
    From memory inter-cluster trunks are a H.323 like protocol which might have video inter-op issues with the Polycom device.

  • CUCM: Third Party SIP Phone "Caller ID" is not displaying for outgoing calls

    Hi Team,
    we are running CUCM 9.1(2a),
    we have integrated Third Party SIP Phone(Avaya 1230 SIP Phone) with CUCM,
    Issue: Third Party SIP Phone "Caller ID" is not displaying for outgoing calls, we are able to see only the dailed Number,
    When "A" calls to "B", "A" can see only the dailed number of "B" but not the "Caller ID"
    Regards
    Ananthakumar

    Are A and B both Avaya phones?
    So it looks like you're not seeing the alerting name/connected name getting updated then?  Do you have alerting names configured on the directory numbers?  Might need to take a look at the SIP messaging to see if the alerting name/connected name is being sent to the Avaya phones and maybe they just aren't displaying it.  Might just be something that needs to be tweaked in the 46xxsettings.txt file.

  • Calling IPC from a third party web application

    ISA, IPC experts,
    We have CRM 4.0 with IPC 4.0. We are developing an in house web application  in jsp/java for dealer orders. Our office staff uses CRM Online for Order Entry.
    We want to use the existing pricing procedures in the IPC to derive the pricing for the web project so our user can see the price for a given product prior to placing the order in CRM.
    How can we call IPC from a third party order software in java? prefereably without installing a standalone IPC (heard that IPC 5.0 may not support standalone mode)?
    Can you help us with ways to call the IPC from our in house web application, or point us to some documentation about the ipc client layer?
    Your help in this regard is highly appreciated.
    Yanhui Yu

    Hi Yanjui,
    if you have a CRM installation, an IPC is part of that installation. Connect your web application to that IPC. The IPC comes with its own web applications, which base on a package com.sap.spc.remote.client.object. These are APIs that you might consider using in your web application. The package should be documented with the API docs that come with your web apps, but I'm not sure about how this is delivered (sorry).
    Concerning upgradability to CRM 5.0: The IPC there does not come as its own server anymore, but offers ABAP RFC functions that are actually implemented in Java using new Netweaver technology. The 5.0 RFCs are similar, but not identical to the old IPC commands / RFCs, so an upgrade is no problem, but some changes are required. The same applies for com.sap.spc.remote.client.object, which has changed a bit as a result of the changes in the IPC APIs below.
    Alternatively to using com.sap.spc.remote.client.object, you might also try to directly call the RFC functions of the IPC server. Finding out what the various parameters that you have to pass do is not too tricky:
    - in your IPC installation, a file <ipc>/lib/properties/servercommands.xml contains all RFCs that the IPC knows.
    - for the RFC you want to use check the respective javaname in that file.
    - for that javaname check class com.sap.spc.remote.server.command.<javaname> in the javadoc API Documentation that is part of your IPC installation. This will contain rather technical details on how to call the RFCs.
    Please be aware that it's not an easy job providing all the data that IPC needs to do pricing.
    I would recommend using the E-Commerce application which has done this job for you already.
    Best regards,
    Karlheinz

  • How to communicate with third party bluetooth device using LAbVIEW

    Hi
          I am trying to communicate with a third party bluetooth device using LabVIEW, I am using a bluetooth dongle. I am able to discover the device and able to open the connection by specifying the service as serial port. But after that when I am trying to read and write data between LabVIEW and the bluetooth device (using Bluetooth Read & Bluetooth Write functions) its not happening.
    Dose anybody faced same kind of issue if so kindly guide me, this is first time I am using Blutooth protocol.
    Regards
    Visuman 

    Hi,
    I am able to talk with bluetooth / serial devices by using Labview protocol (not Wii dll). These are steps:
          Discover the bluetooth device in range (Bluetooth dicover.vi)
          Get the address of the device
          Pass device address to Bluetooth RFCOMM Service Discovery.vi to get service list
          Pass channel and uuid to Bluetooth open connection
          After that do write and read (Bluetooth Write / Bluetooth read).
      I hope it works for you.
    Take care
    tp
     

  • Call Forwarding with Schedule

    I'm wondering if it's possible to set up call forwarding with schedule? For example, calls received at the Skype Number will be forwarded to phone number A from 12am to 12pm, phone number B from 12pm to 4pm, and a Skype contact from 4pm to 12am.
    Thanks!

    Hi, Jimliu, and welcome to the Community,
    Fabulous idea!  Unfortunately, the Skype Number feature does not provide such facility as you describe.
    Best regards,
    Elaine
    Was your question answered? Please click on the Accept as a Solution link so everyone can quickly find what works! Like a post or want to say, "Thank You" - ?? Click on the Kudos button!
    Trustworthy information: Brian Krebs: 3 Basic Rules for Online Safety and Consumer Reports: Guide to Internet Security Online Safety Tip: Change your passwords often!

  • Third party time device

    Hi to all,
    Can any one share the configuration of how to connect the SAP HR with the Third party time device of swipe in and swipe out of an employee.
    You can mail the document to my id of shreyasen1980 at the rate of gmail dot com
    Thanks,
    Shreyasen

    Hi,
    There are many third party devices that can be integrated with SAP for capturing time events in IT2011. Timelink is one of them and it is  SAP certified partner. Following are the high level steps to be followed considering SAP integration with Timelink.
    Setup and assign timelink user with proper profiles
    Setup RFC destination for the timelink
    Create the logical system for timelink
    Define ports for IDOC processing
    Define the distribution model for timelink for exchanging inbound and outbound messages
    Define the partner profiles
    Verify the IDOC list and the communication manually between Timelink and SAP
    Best Regards,
    Sunny

  • Paging Third Party SIP Phones connected to CUCM

    Current SetUp: CUCM - Cisco 3925, Two MCS 7816 (Call Control Server) and One MCS 7825 (Voice mail server)
    We have third party SIP phones configured in auto answer mode. These phones are used to make live announcements.
    To Do:
    There are approximately 80 phones in the system and the requirement is to select any combination of these phones to make Public announcement (or Paging).
    Is there an application that enables us to select any combination of phones on the fly to do paging? How can we select a mp3 file to play on a phone in an auto answer mode?
    Any help will be appreciated.
    Thanks
    Sid

    There's nothing built into call manager to do this.  You could investigate using the Cisco Unified Application Environment (CUAE) and write a script to do this, or there are some 3rd party applications that might work for you such as Berbee's Informacast.

  • Add third party SIP Phone to CCM 5

    'm not able to register this SIP Phone to the CCM5.0. I have device license that cater all IP Phone models.(LIC-CM-DL-100=)
    I got error message " Login Forbidden" "timeout" in the IP Phone.
    In the CCM, I got this message in Phone COnfig Window
    Registration: Rejected.
    Can you explain on how to register this 3rd party IP phone to CCM?
    Is it CCM able to support SIP Phone?

    Hi,
    This is most likely because of the following...
    Because third-party SIP phones do not send a MAC address, they must identify themselves by using digest authentication.
    The REGISTER message includes the following header:
    Authorization: Digest username="swhite",realm="ccmsipline",nonce="GBauADss2qoWr6k9y3hGGVDAqnLfoLk5",uri="sip:172.18.197.224",algorithm=MD5,response="126c0643a4923359ab59d4f53494552e"
    The username, swhite, must match an end user that is configured in the End User Configuration window of Cisco Unified CallManager Administration. The administrator configures the SIP third-party phone with the user; for example, swhite, in the Digest User field of Phone Configuration window.
    See the following document.
    http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/5_1_3/ccmcfg/b09sip3p.html
    Hope this helps, if so please rate.
    Regards,
    Dave

  • Third Party SIP Phone Alerting name

    Hello,
    We are having cisco ip phones & third party sip phones in our company. both are registered to same cucm 9.X.
    Now when cisco phones calls sip Phones. we are able to see the alerting name on cisco phone.
    Say, Cisco Phone "Phone-A" calls Third Party Sip phone "Phone-B". So, on cisco ip Phone display we are able to see "Phone-B".
    But same when we try from SIP phones to Cisco phones, we are unable to see the Alert name on the Sip Phone. only the Number we can see on the Sip phone.
    Any help will be highly appriciated.
    Thanks,

    Hi Amod.
    I'm terribly sorry cause I got what you are asking only now :(
    This behaviour depends on client capability.
    CUCM always send RPID ( remote-party ID) to the third party SIP client/phone on ring.
    If the client is capable to update the calling number into what it receives as RPID, than you'll be able to see calling name.
    I've read some release notes of XLITE and other  SIP Desk phone and it seems to be not mentioned.
    Sorry again
    Regards
    Carlo

Maybe you are looking for