Activate a transported rutine in customizing not allowed, live systems

Hello,
I am looking for any way to activate a trasported LIS (MC1B, MC1D) or copy control (VOFM) rutine from development to live system, without allowing customizing in live systems.
Thanking you in advance.
Kind regards,
Nilüfer Çalışkan
SD consultant

When the requirement/Info structure is transported, it has to be activeted to take effect. To do this, run program <b>RV80HGEN</b> in the target system which will activate all requirements. This will add the requirement to program RV61BNNN (SAPLV61B => LV61BNNN).
Else, the execution of program RV80HGEN can be included in the transport so that the program is run in the target system. To do this, edit the request in SE10.
Select the request and press the Display Object List button. When in the object list, press Display <--> Change then New Entries. Add <b>R3TR XPRA RV80HGEN</b> to the object list: and Save.
Next, transport the request normally. This would resolve your problem.
Regards,
Gauravjit.
Reward points if the solution is helpful

Similar Messages

I am trying to activate new qualitative research software. When I attempt to activate it my Apple Air will not allow it and gives an error message saying we cannot verify the identity of the developer of the software

I am trying to activate new qualitative research software. When I attempt to activate it my Apple Air will not allow it and gives an error message saying we cannot verify the identity of the developer of the software

The developer isn't recognized by the App Store, so your Mac is trying to protect you in case the program is malware. As long as you are sure it isn't, follow this procedure:
In the Finder, locate the app you want to open.Don’t use Launchpad to do this. Launchpad doesn’t allow you to access the shortcut menu.
Press the Control key, then click the app icon.
Choose Open from the shortcut menu.
Click Open.The app is saved as an exception to your security settings, and you will be able to open it in the future by double-clicking it, just like any registered app.
OS X Mavericks: Open an app from an unidentified developer

Transport Reuest import error in BW Live System

Hi,
I raised a transport request in BW Development system for the changes i made to the queries that are already avaliable in Live system.
I imported the request with out error in Quality System and the queries in Quality are updated with the changes i made.
When i import the same request to Live system it is failed with error RC 8.
When i checked the queries one query is updated with the changes i made in Dev system and other is not updated
Error Msg:
Object ELEM 8HV3QPKGUZL61GQH00KRI7369 has not yet been imported successfully
Diagnosis
The object R3TR ELEM 8HV3QPKGUZL61GQH00KRI7369 has not yet been imported without error.
System Response
Import post-processing is not performed for this object.
Procedure
Examine the import log for this transport request for error messages.
Repeat the import after removing the cause of the errors.
Please update me how to proceed
Thanks

One of the query elements (e.g. Calculated Key Figure, Variable, et. al.) was not captured on your transport and has never been imported into your target environment.
In your development system, go to SE16 and query on table RSZELTDIR to determine which query element the thrown issue is referring to. Use the following parameters for your query:
ELTUID (ID) = 8HV3QPKGUZL61GQH00KRI7369
OBJVERS (Varsion) = A
The MAPNAME (Query) column will give you the name of the query element that you'll need to put on a transport and move through to your target environment.

CRMD_SHORTCUT modification is not possible when customizing not allowed cli

CRMD_SHORTCUT modification is not possible when the client closed to
customizing.
How can we change the AUDIENCE TYPE and the AUDIENCE KEY of a saved
search when the client is a productive and no changes allowed settings
has been made?

Hi, why don't you just make a navigation banner (bar) with the buttons they should be able to reach? Page group properties is where you decide the default navigation banner. So make a new banner for your users and set it as the default one.
Kristin

Firefox 4.0 will not allow live chat in Win 7

When trying to enter a Live Chat session I get a message "Cannot continue live chat because your browser is not supported " that pops up in a separate FF window. I'm running FF 4.0 and Windows 7. All works well in FF 3.6.16 and Win XP.

Try to start windows in safe-mode [http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/boot_failsafe.mspx?mfr=true Windows in safe-mode]. Also see [[Firefox won't start - find solutions]]

Field exit showing---not allowed to change cross client customizing

hi all ,
when im trying to activate field exit . Its showing---not allowed to change cross client customizing.
how to correct that.
thanks in advance.
sg

hi SG,
first and foremost thing while using field exit is, ask your basis person to include the parameter abap/fieldexit = Y in your instance profile.
Otherwise u can't use the field exits.
Regards....
Arun.
Reward points if useful.

UPK 11.1 installation error "(405) Method Not Allowed"

Hi
While assisting a customer to install UPK 11.1 I encountered an issue and a Libraryloader log was generated
System of the client to install UPK 11.1 on is
- Virtuele machine W2008 x64 R2
- Separate sql cluster for the databases
Both machines are in the same domain!
2012-12-14 15:18:36 INFO Application started
2012-12-14 15:18:36 INFO Command line: "C:\Program Files (x86)\User Productivity Kit\UPK Developer 11_1Server\LibraryLoader.exe" "C:\install\Oracle UPK\V30865-01\UPK_Pro_v11.1.0" "/librarylocation:http://vupk:80/UPKDevcontent" /language:NL /producttier:Server /branding:UPK /overwrite:no /update:no /authenticationtype:windowscurrent
2012-12-14 15:18:36 INFO Source path: C:\install\Oracle UPK\V30865-01\UPK_Pro_v11.1.0
2012-12-14 15:18:36 INFO Library location: http://vupk:80/UPKDevcontent
2012-12-14 15:18:36 INFO Language: NL
2012-12-14 15:18:36 INFO Product tier: Server
2012-12-14 15:18:36 INFO Branding: UPK
2012-12-14 15:18:36 INFO Overwrite: False
2012-12-14 15:18:36 INFO English only: False
2012-12-14 15:18:36 INFO Options:
2012-12-14 15:18:36 INFO Import system documents: True
2012-12-14 15:18:36 INFO Copy files: True
2012-12-14 15:18:36 INFO Authenticate only: False
2012-12-14 15:18:36 INFO Authentication type: windowscurrent
2012-12-14 15:18:36 INFO User name:
2012-12-14 15:18:36 INFO Password: ***
2012-12-14 15:18:36 INFO Update: False
2012-12-14 15:18:36 INFO Loading documents in Server - Client environment
2012-12-14 15:18:36 INFO Authenticate by Windows authentication
2012-12-14 15:18:36 ERROR Gkn.OnDemand.Library.OfflineException:
at Gkn.OnDemand.Library.LibraryComponent.AuthenticateProfile(IUserProfile userProfile) in e:\BUILDROOT_SUN\Builds\Branches\Hacienda\tfs\Core_DotNet\LibraryComponent\LibraryComponent.cs:line 388 at Gkn.OnDemand.Library.LibraryComponent.Run(String command) in e:\BUILDROOT_SUN\Builds\Branches\Hacienda\tfs\Core_DotNet\LibraryComponent\LibraryComponent.cs:line 264 at Gkn.OnDemand.ComponentModel.ApplicationCore.Run(String bootComponentId, String command) in e:\BUILDROOT_SUN\Builds\Branches\Hacienda\tfs\Core_DotNet\ComponentModel\AppCore.cs:line 154 at Gkn.OnDemand.ComponentModel.Application.Run(String bootComponentId, String command) in e:\BUILDROOT_SUN\Builds\Branches\Hacienda\tfs\Core_DotNet\ComponentModel\Application.cs:line 538
InnerException:
Gkn.OnDemand.Library.LibraryConnectionException: There is a problem with the server configuration. See your system administrator with the following information.
at Gkn.OnDemand.Library.RemoteRepositoryStrategy.GetLibraryInfo(IUserProfile userProfile) in e:\BUILDROOT_SUN\Builds\Branches\Hacienda\tfs\Core_DotNet\LibraryComponent\RemoteRepositoryStrategy.cs:line 98 at Gkn.OnDemand.Library.LibraryService.GetLibraryInfo(IUserProfile userProfile) in e:\BUILDROOT_SUN\Builds\Branches\Hacienda\tfs\Core_DotNet\LibraryComponent\LibraryService.cs:line 290 at Gkn.OnDemand.Login.LoginService.Authenticate(IUserProfile userProfile, Boolean login) in e:\BUILDROOT_SUN\Builds\Branches\Hacienda\tfs\Core_DotNet\LibraryComponent\Login\LoginService.cs:line 183
InnerException:
System.ServiceModel.ProtocolException: The remote server returned an unexpected response: (405) Method Not Allowed.
Server stack trace: at System.ServiceModel.Channels.HttpChannelUtilities.ValidateRequestReplyResponse(HttpWebRequest request, HttpWebResponse response, HttpChannelFactory factory, WebException responseException, ChannelBinding channelBinding) at System.ServiceModel.Channels.HttpChannelFactory.HttpRequestChannel.HttpChannelRequest.WaitForReply(TimeSpan timeout) at System.ServiceModel.Channels.RequestChannel.Request(Message message, TimeSpan timeout) at System.ServiceModel.Channels.SecurityChannelFactory`1.SecurityRequestChannel.Request(Message message, TimeSpan timeout) at System.ServiceModel.Dispatcher.RequestChannelBinder.Request(Message message, TimeSpan timeout) at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout) at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage methodCall, ProxyOperationRuntime operation) at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message) Exception rethrown at [0]: at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg) at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type) at Gkn.OnDemand.Service.Content.RepositoryInfoServiceReference.IRepositoryInfoService.GetLibraryInfo() at Gkn.OnDemand.Library.RemoteRepositoryStrategy.GetLibraryInfo(IUserProfile userProfile) in e:\BUILDROOT_SUN\Builds\Branches\Hacienda\tfs\Core_DotNet\LibraryComponent\RemoteRepositoryStrategy.cs:line 91
InnerException:
System.Net.WebException: The remote server returned an error: (405) Method Not Allowed.
at System.Net.HttpWebRequest.GetResponse() at System.ServiceModel.Channels.HttpChannelFactory.HttpRequestChannel.HttpChannelRequest.WaitForReply(TimeSpan timeout)
Would it be possible to have a SQL/IIS configuration plan that we can share with a customer and have in this plan the minimum requiremnts regarding settings and autorisations?
I suspect there is something wrong with their SQL or IIS settings however I didn't succeed to determine that.
Or if their is a possibility to share their settings here and get feedback on that to solve the issue?

The "Method Not Allowed" message is a very common message, meaning that there are problems in GET/POST actions.
To answer your question about teh basic IIS configuration:
The Roles must include IIS default features and under IIS Authentication you must enable Windows Based authentication if you plan to use this. If you plan to use forms authenticaton you don't need this option under the IIS Role. In that case the basic authentication is fine.
Under Features I recommend also to set teh option on for ASP.NET and especially the option for WCF activation. Without it might also work, but this installs the .Net framework properly. Then install UPK 11 and let UPK install .Net framework 4.
If you installed .Net framework 4 manually, make sure it is registered properly, for example with the command: C:\Windows\Microsoft.NET\Framework64\v4.0.30319\aspnet_regiis.exe -ir

MIME Upload: Operation is not allowed (M_APP_P) take #2

Hello folks,
with respect to the following thread: Operation is not allowed (M_APP_P)
System Info:
NW AS 7.03 ABAP Stack 731 Level 9, ECC 606 (EHP 6) with SAP_HR 604 Level 73 and EA_HR 607 (HR-Renewal 1) Level 24
Background:
One of our external colleagues is currently developing some Themes for certain WDA Applications. He recently applied and deployed them with means of the report WDG_MAINTAIN_UR_MIMES. A few weeks later I had to apply several Unified Rendering Notes because the upgrade to 731 Basis Stack 9 wrecked quite some functionalities concerning keyboard-accessibility. Whilst doing that, I ran into the Problem, that the archive ur_mimes_nw7.zip had been locked by the said colleague (apparently the lock was set implicitly by using the Download Option of the Report WDG_MAINTAIN_UR_MIMES which was used to save away the unmodified archive before uploading the modified one) and this also provoked the error message mentioned in the thread over here: Operation is not allowed (M_APP_P). After removing the lock from the archive I used the workaround approach Jean Clappier described in the said thread and I was able to implement the respective UR-Notes.
Problem/Question:
Today our external colleague wanted to recommence the implementation of the themes and now receives the same error message "Operation is not allowed (M_APP_P)" when trying to upload an archive via WDG_MAINTAIN_UR_MIMES.
Now, we could be using the workaround in the linked thread again, but none of us knows for 100% sure if there isn't something "extra special" the Report does which we would miss. So, this is one part of the actual question of this thread:
Is there any difference between uploading/overwriting ur_mimes_nw7.zip hard via SE80 and uploading it via WDG_MAINTAIN_UR_MIMES?
The other part is the understanding what's actually happening here. I attached a screenshot for the part of the coding where the error message ultimately originates from. My problem is understanding the very cryptic functional reason why the upload supposedly "isn't allowed", because what I see is, there's an attempt to save the archived File via Form routine phio_store_as_update in FM SDOK_PHIO_STORE_AS_UPDATE, so apparently an update of something that's already supposed to be there? However at some later point of the coding (screenshot) the PHIO appears to be initial and that's probably why the error occurs. Could be true, could be entire nonsense; either way I don't get it. Screen:
What I tried so far / Analysis:
Debugging into the delicious spaghetti-code
Any help/input is highly appreciated!
Cheers, Lukas

Hello community,
as a co-worker of Lukas Weigelt I also examine that problem and found it’s reason. In the Report “WDG_MAINTAIN_UR_MIMES“ the LOIO of the uploaded data will be used to determine the corresponding PHIO. Therefore the Function Module “SKWF_LOIO_ALL_PHIOS_GET” is used. In the deep of it’s code it selects the PHIO from the table “SMIMPHIO” through the LOIO. But instead of only one PHIO to the LOIO the table offers three records with three different PHIO’s. In the further runtime of the report “WDG_MAINTAIN_UR_MIMES“ only the first found entry will be considered – and that’s the wrong PHIO which causes the error. This PHIO even has (as you can see in the attachment) the state '0000' which may means 'invalid' and indicates the error. By altering the PHIO to the right one, which is the one with the state '0002', the report works well.
Now the question is whether I can delete the two assumed 'invalid' PHIO-records in the table “SMIMPHIO” or not. Until then I’m able to use the report “WDG_MAINTAIN_UR_MIMES“ correctly by altering the PHIO to the right one in the debugger.
Regards, Marvin

Error during Upgrade advisor Progress "Requested registry access is not allowed. (mscorlib)"

Hello ,
        I have installed " SQL Server 2012 Upgrade Advisor" successfully on my local system. A Successfull connection was establised to SQL Server insatnce on Remote Server through Upgrade Advisor
,On click of Run below error is raised
===================================
Requested registry access is not allowed. (mscorlib)
Program Location:
   at System.ThrowHelper.ThrowSecurityException(ExceptionResource resource)
   at Microsoft.Win32.RegistryKey.OpenSubKey(String name, Boolean writable)
   at Microsoft.Win32.RegistryKey.OpenSubKey(String name)
   at Microsoft.SqlServer.UpgradeAdvisor.SqlDetection.GetClusterInfo()
   at Microsoft.SqlServer.UpgradeAdvisor.SqlDetection.GetSqlInstances()
   at Microsoft.SqlServer.UpgradeAdvisor.SqlDetection.EngineExists()
   at Microsoft.SqlServer.UpgradeAdvisor.AnalyzerEngine.GetAnalyzer(AnalyzerType analyzerType)
   at Microsoft.SqlServer.UpgradeAdvisor.AnalyzerEngine.RunAnalyzer(AnalyzerType analyzerType, String& reportFile)

Yes instance and upgrade advisor version are same (64 bit ).edition of SQL Server is Enterprise Edition (64-bit)
Upgrading from SQL Server 2008 to SQL server 2012.
1) provided with Server Name and component
SQL SERVER was Checked.
2) Clicked on Next , Instance Name and SQL Server Authentication
was selected.
3) Login Ceredentials provided and Clicked on Next.
4) Only one Database to analyze was checked and Clicked Next.
5) On Click of Run below error occured.
On click of Advance Information of error   >> ALL Messages :
===================================
Requested registry access is not allowed. (mscorlib)
Program Location:
   at System.ThrowHelper.ThrowSecurityException(ExceptionResource resource)
   at Microsoft.Win32.RegistryKey.OpenSubKey(String name, Boolean writable)
   at Microsoft.Win32.RegistryKey.OpenSubKey(String name)
   at Microsoft.SqlServer.UpgradeAdvisor.SqlDetection.GetClusterInfo()
   at Microsoft.SqlServer.UpgradeAdvisor.SqlDetection.GetSqlInstances()
   at Microsoft.SqlServer.UpgradeAdvisor.SqlDetection.EngineExists()
   at Microsoft.SqlServer.UpgradeAdvisor.AnalyzerEngine.GetAnalyzer(AnalyzerType analyzerType)
   at Microsoft.SqlServer.UpgradeAdvisor.AnalyzerEngine.RunAnalyzer(AnalyzerType analyzerType, String& reportFile)
Log file Error Message :
12/01/2014 17:17:47 UA <Error>System.Security.SecurityException: Requested registry access is not allowed.
   at System.ThrowHelper.ThrowSecurityException(ExceptionResource resource)
   at Microsoft.Win32.RegistryKey.OpenSubKey(String name, Boolean writable)
   at Microsoft.Win32.RegistryKey.OpenSubKey(String name)
   at Microsoft.SqlServer.UpgradeAdvisor.SqlDetection.GetClusterInfo()
   at Microsoft.SqlServer.UpgradeAdvisor.SqlDetection.GetSqlInstances()
   at Microsoft.SqlServer.UpgradeAdvisor.SqlDetection.EngineExists()
   at Microsoft.SqlServer.UpgradeAdvisor.AnalyzerEngine.GetAnalyzer(AnalyzerType analyzerType)
   at Microsoft.SqlServer.UpgradeAdvisor.AnalyzerEngine.RunAnalyzer(AnalyzerType analyzerType, String& reportFile)
The Zone of the assembly that failed was:
MyComputer</Error>

How 2 identify Workbench-TR in integration not in productive system

Hello ABAP comunity,
i want to identify workbench transport requests, that are already in consolidation - / integration - system, but not in productive system.
So far, i know transport organizer tools (TC se01). But how can i reduce the quantity of transport requests to those, not on productive system.
Help will be rewarded!
Thanks in advance!
Gunther

create a report program and using RFC dtn to Quality server select from E070 ,requests as per ur requirement and compare it with Production table with the internal table from Quality.
it_qas with it_prod.
I think this works

I have an iphone 4 and after updating it to the ios5 software, it will not allow me to activate nor allow me to leave the setup page. i cannot even restore it. does anyone know what to do?

i have an iphone 4 and after updating it to the ios5 software, it will not allow me to activate nor allow me to leave the setup page. i plugged it into itunes and it is stuck there too... i cannot even restore it. does anyone know what to do?

I have had this same issue but thankfully fixed it. Follow he steps below:
Sync your iPhone with you iTunes therefore your info is backed up. Unplug your phone.
Go to Settings > Reset > Erase All Content and Settings
Once your phone has reset and come back on answer the question until it asks if you want to back up from itunes Click this then plug your phone in.
After everything has sync'd back to your phone everything should work fine.
Hope this helps.

I have an iPhone 4s, and I reset the content and setting. It turned on, I chose English, Australia, and now, I am unable to connect/activate my iPhone through Wi-Fi, and for an unknown reason, it will not allow me to use cellular data or iTunes.

I have an iPhone 4s, and I reset the content and setting. It turned on, I chose English, Australia, and now, I am unable to connect/activate my iPhone through Wi-Fi, and for an unknown reason, it will not allow me to use cellular data or iTunes. I'm not sure of what to do. It's quite frustrating, and all I need is advice, and help. I would much appreciate it. Thank-you.

In order to download to your phone over the air, you need to be connected to WiFi.
It's possible the Internet connection through Verizon is not stable enough for the downlaod to begin (it is a very large download).
You might want to head over to Starbucks with your laptop for the afternoon and see if you can download it over their WiFi.

I have just subscribed for a monthly billing for my acorbat pro XI, the problem is i have clicked on the link on the email that have sent me to activate it but its still not allowing me to acess this and see my PDF's

i have just subscribed for a monthly billing for my acrobat pro XI, the problem is i have clicked on the link on the email that have sent me to activate it but its still not allowing me to acess this and see my PDF's, how to i activate my new license?

Can you explain the problem in more detail - "not allowing me to access" isn't clear to me. If you get any errors, please give the full wording. If you just don't seem to have any useful functions under TOOLS, make sure you are NOT still running Adobe Reader.

Motion 5 not allowing me to save custom transitions. Please help.

How can I create custom transitions for Final Cut Pro X. Motion 5 is not allowing me to save custom templates. I have followed the instructions in Motion 5 user manual...but, it's not working. Please help. When I create a category, it reverts to a blank line. I'm unable to publish the transition.

Check Settings>General>Restrictions> Location Services>make sure is set to "Allow Changes"

Valuated project stock not allowed with customer stock.

Hi,
I am trying to create invoice correction request for credit with the reference of invoice
the invoice data is not copying into sales order. I am getting the error "Valuated project stock not allowed with customer stock".
My question is can we have any routine in copy controll to fulfill my requirement or do i develop a new routine?
Thanks in advance.
Regards,
Narayana

Hi
Did you find any sloution for this problem?
I am facing the similar error.
Inputs will be helpful
Thanks
Regards
DDP

Activate a transported rutine in customizing not allowed, live systems

Similar Messages

Maybe you are looking for