Activate audio file to play when patch selected.

How do I get an audio file that is loaded into a channel strip and the playback window,,,
to ACTUALLY PLAY, when selected?
Please help, Thank you

Do you mean play when you select the patch? If so, select the Action menu (top right of waveform display), then select "Start on Patch Change."

Similar Messages

Audio file not playing when previewed or pulised on only one slide

I have one slide that the audio will not play unless the you click on the play button in preview or when published. All other slide audios are working fine and will play automtically when the next button is clicked on the previous slide. I have tried changing the name of the audio file, deleting the sled and the fiel and staring over etc. the audio file were created in another program and then brought into Captivate but thia has not been a problem with any other production up to this point. Any suggestions?

I will be out of the office starting 22/10/2009 and will not return until
28/10/2009.
If you require urgent assistance then please contact Emma Dawson on 15832
alternatively I will respond to your query on my return.

I am trying to use the auto audio-sync feature. When I select the video and audio clip to be synced FCPX says its syncing them and then once finished (at 100%) no compound clip is created and the video and audio file do not sync. Any help is appreciated.

I am trying to use the auto audio-sync feature. When I select the video and audio clip to be synced FCPX says its syncing them and then once finished (at 100%) no compound clip is created and the video and audio file do not sync. Any help is appreciated.

Hi
In iMovie'11 (version 9.0.x)
on top menu row - Apple/iMovie/File/Edit/Cut (Can vary dep. on language - in Swedish Apple/iMovie/Arkiv/Redigera/Klipp . . . )
down Cut menu - Slow playback/Raspid Playback/Re-play in Slow Motion and onvards
Here one can select the Pre-Set speeds
Are you familiar with getting 'inspector' to run?
No - but I guess that Double Click on clip/sequense or ctrl-Click on it might open it.
Yours Bengt W

Some of the songs I have downloaded onto i tunes won't play when I select it to do so. The error message I get is "The song could not be used because the original file could not be found. Would you like to locate it?" How can I get my songs to play?

Some of the songs I have downloaded into i tunes won't play when I select it to do so. The error message I get is "The song can not be used because the original file can not be found. Would you like to locate it?" When I select yes I'm sent to a screen that has my i tunes library listed. When I select the song in question I'm asked if I would like to open the song. When I select this option I get nothing. The songs I have downloaded must be somewhere because they are listed in my i tunes library and on the screen I've been sent to. I can't the songs to play however. This is not true of all of my songs but it is true of quite a few of them. Actually, one song is too many. How do I get my music to play that seems to be locked up somewhere in the computer?

Presuming they're on your computer, right click on them and then follow the prompts to locate hte file on your computer.

I have created a PDF with mp3 audio clips, the file works on PC's with audio playback (WIndows 7, 8 ) however the audio does not play when hosted on a website or an ipad/tablet computer or smart phone when used with PDF reader

I have created a PDF with mp3 audio clips, the file works on PC's with audio playback (WIndows 7, 8 ) however the audio does not play when hosted on a website or an ipad/tablet computer or smart phone when used with PDF reader

adobe42135678 wrote:
the audio does not play when hosted on a website...
When viewing in what browser?

Why dont all my photos (345) play when i select a specific file?

Why dont all my photos (345) play when i select a specific file?

Hey there Mrk_wrd,
It sounds like you can successfully sync with iTunes and get no error messages, but when you try and play your music, the songs just scroll through and will not play.
I think I would start with closing the Music app on your phone and restarting it. Then try again to play your music.
Restarting your iOS device
Press and hold the Sleep/Wake button for a few seconds until the red "slide to power off" slider appears, and then slide the slider.
After the device has turned off, press and hold the Sleep/Wake button until the Apple logo appears.
From: iOS: Turning off and on (restarting) and resetting
http://support.apple.com/kb/ht1430
If the issue persists then I would resync your content to your phone.
Plug your device into iTunes and click it. Then go to your Music tab and uncheck the Sync Music checkbox, and click apply in the lower right corner. That will remove the music from the iPhone.
From: iTunes 11 for Mac: Set up syncing for iPod, iPhone, or iPad
http://support.apple.com/kb/PH12113
When that process is done, restart both your iPhone and the computer, then go back into iTunes and recheck the Sync Music checkbox and click apply again to resync your music to the phone and test it again.
Thank you for using Apple Support Communities!
All the best,
Sterling

Powerpoint - audio file not playing

Hi I created a PP presentation using PP 2010 and I inserted an audio file to play automatically throughout the whole presentation. I email it to a friend and it plays perfectly on her computer at home. However, when she tries to play it on her laptop at
school (they have Office 2007) the music doesn't play at all.
I've told her to delete the audio file and insert it again but it still isn't working - any suggestions?
Viv
Viv Haig

What's the format of that audio file? Convert its format to .wmv and re-insert it.
Please copy the audio file onto desktop and directly play it through Windows Media Player, does it work?
Tony Chen
TechNet Community Support

How to get the length of a audio file without play it ?

Now I know a method to get the length of a audio file by play it:
1 Create a Player, and add a ControllerListener
2.Start the Player
3.In the ControllerListener's controllerUpdate method, use getMediaTime() by receiving a EndOfMediaEvent
However I think this method is not convenience, if I don't want to play it how I can get the length of the audio file?
Is anyone can help me?Really thanks a lot !

I got the answer here:
http://forum.java.sun.com/thread.jspa?threadID=5149132&tstart=15
I tried getDuration() before, but it always return a same time, I think maybe I didn't realize the player.

How do I get a 3ga audio file to play on iphone 4s?

How do I get a 3ga audio file to play on iphone
4s?

You don't need to download an App.
My understanding is that you simply have to change the file extension from .3ga to.mp3 (on each file) and then they should play.
That said, it works on a Macbook Pro - I've just tried it.
Not sure about iOS though.
Please reply if it works for you.

Specify audio file to play on sound events...

How about add an option to let us specify exactly which audio file to play on sound events?

but i want to be able to use a sound event specific to lightroom and i dont want to change my windows sound scheme to do that

When trying to download iTunes for Windows XP Service Pack 3, I receive the message "You have chosen to open iTunesSetup.exe" "Would you like to save this file?". When I select Save File, nothing else happens. How do I continue to install iTunes?

When trying to download iTunes for Windows XP Service Pack 3, I receive the message "You have chosen to open iTunesSetup.exe" "Would you like to save this file?". When I select Save File, nothing else happens. How do I continue to install iTunes?

See the further information area of Troubleshooting issues with iTunes for Windows updates.
tt2

Can the playbar widget be configured to start an audio file once 'play' is clicked?

Captivate 5
I'd like to create a slide in which the user can click on a 'play' button to hear some audio. Preferrably, I'd like the button to toggle between symbols representing 'play' and 'pause' when the audio is playing.
I was hoping that inserting a playbar widget would accomplish this, but unfortunately the audio I've attached to the widget plays automatically when the slide begins. I'd like the audio only to play when the user clicks the play button on the widget.
I understand that there are work-arounds for this, but aesthetically it's important to me that the button be dynamic (that is, that it should change when the user clicks it).
Thanks.

The general workaround for dynamic buttons like you describe is to use Show/Hide Advanced Actions to make it appear as if the button is changing by toggling the images the user sees.
As for getting the user to hear audio when a button is clicked...this is easy enough to do by attaching the audio to the Success caption of the button. That way, it will only begin playing when the Success caption appears, not when the button appears. If you don't want the Success caption to be visible, just turn it into a Transparent caption with no text, or move it off stage (in Cp5).
You'll need to experiment with Advanced Actions to get the toggling of the button images and the play/stop of the sound to work as expected, but it should be doable.
Lilybiri has lots of great stuff on her blog about using Advanced Actions: http://lilybiri.posterous.com/

Hype widget; audio won't play when previewing on iPad

Hi,
I've come across a strange 'bug' in iBooks Author. Hope someone can help.
I made a widget using Tumult's Hype software. It has multiple scenes, audio and animated text. When previewing the widget in Hype everything works fine. But here comes the strange part;
When I insert the hype widget in an empty iBooksAuthor book the animation and audio works fine when previewing on my iPad2. But when i insert the widget in my iBook, wich has already ten pages filled with text, reviews, etc., the animation work, but the audio won't play when previewing on my iPad.
People from Tumult helped me, but were not able to fix this.
So in an empty book the widget from Hype works fine, but when inserting the widget in a book that has some pages the audio won't play! How can i fix this?
Thanks for the support!

Hi,
I've come across a strange 'bug' in iBooks Author. Hope someone can help.
I made a widget using Tumult's Hype software. It has multiple scenes, audio and animated text. When previewing the widget in Hype everything works fine. But here comes the strange part;
When I insert the hype widget in an empty iBooksAuthor book the animation and audio works fine when previewing on my iPad2. But when i insert the widget in my iBook, wich has already ten pages filled with text, reviews, etc., the animation work, but the audio won't play when previewing on my iPad.
People from Tumult helped me, but were not able to fix this.
So in an empty book the widget from Hype works fine, but when inserting the widget in a book that has some pages the audio won't play! How can i fix this?
Thanks for the support!

Why is the audio file stop playing midway through a .mp3 file in Firefox and not in the IE browser ?

I added an audio file on to my website, http://www.widescreenonlinereview.com/COMIC-REVIEWS.html. However, the mp3 file stop midway though the song, but the .mp3 file plays completely in the IE Browser.
I tried update Firefox, but I lost some major add-on, which me caused to return to my present Firefox browser, and the .mp3 file still would not play completely in the updates browser either.

Hello,
'''Try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
''(If you're not using it, switch to the Default theme.)''
* You can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
''Once you get the pop-up, just select "'Start in Safe Mode"''
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''
Thank you.

Audio won't play when I'm skimming through clips on iMovie

The audio of the clips I have on iMovie won't play when I'm skimming through them, but will play when I play the clips. I made sure the volume of every clip and on the computer works (it does) but this is getting really annoying. Can anyone please help me out?

To Reboot your computer, select /Shutdown... from the top menu. Wait a few seconds, then turn your computer back on with the on switch.
You don't really have to know what a swapfile is, but here is a simplified explanation.
Your computer comes with a processor (Intel 2.8 ghz in my case), memory (2GB in my case), and a hard drive (500GB in my case).
The processor is very fast. The memory holds the instructions and the data that the processor will work on next. Long term storage is kept on the hard drive, which is slower. Think of the following metaphor: You are sitting at a desk. You are the processor. Your desktop is the memory, which contains the stuff you are ready to act on. Stuff you have already acted on, or will not need until later, is in the drawers or in a file cabinet (the hard drive).
Let's say you are working in several applications at once: iMovie, Microsoft Word, iTunes, Calendar, and Safari. Each of these programs needs some of your memory to function, and to get stuff to the processor for action. If you add all the memory requirements up, it may be more than the 2GB of "real" memory that you have. Fortunately, OSX lets you use virtual memory, so your programs can pretend they have as much memory as they need. Your programs can address memory as if they had a whole bunch of memory all to themselves.
This is done through swapfiles. When there is more virtual memory than real memory, the programs and data that have been used least recently are swapped out to hard disk in a swapfile. This file is not the permanent storage. It is the temporary parking place for memory when the real memory is being used by another application.
So lets say you want to use iMovie. It might take up 1GB out of your 2GB. There is not room, so OSX looks around and sees that you haven't used iTunes in a while. So the itunes instructions and music about to be played is swapped our to a swapfile on the harddisk.
If you decide you want to listen to iTUnes, you will have to wait a few seconds as iTunes is swapped back in to real memory, and something else is swapped out.
This is a simple case. It can get more complicated.
But, as you run more and more programs, the real memory gets used up and there might be seven or eight swapfiles out on disk. At some point, OSX gets sluggish and has a hard time dealing with this. For example, if two large swapfiles needed to be paged in at the same time, there might not be room. Also, the real memory can get fragmented, and have open space, but the open space is not big enough to swap something in.
I run a free utility called Memory Stick that shows me how many swapfiles I currently have. If I am working on something critical in iMovie, and I notice that I have a lot of swapfiles, I will usually just reboot and start over with 1 swapfile. In doing this, I hope to avoid the spinning beach ball that happens when OSX can't handle it any more.
You don't really need to know this. OSX handles it for you. But understanding how it works can help you self-diagnose some problems from time to time.

Activate audio file to play when patch selected.

Similar Messages

Maybe you are looking for