Activate BCS from year

Hi,
We are going live from 1st April  2015 for FM-BCS. In the "Activate Global Functions for Budgeting", I have mentioned from fiscal year 2014 as I required to test the in Development and Quality.
Now when I want to go live on 1st april, after transporting the requests to production, I will have to create all the master data and upload the budget. Once I transport the requests to production system will start asking for the budget. How do I plan it?
Shall I change the fiscal year start to 2015 and ask users not to post any transactions for new fiscal year 2015 till I complete my master data entry and budget upload?
Is this approach is correct? Please guide
Regards
Shailesh

Hi
Hope you are activating FM from new financial year and other modules are already live
My advise would be except activation of funds management, you can move all requests.
then upload all FM masters and set derivation strategy.
After setting everything you activate FM from the new financial year
Sunoj

Similar Messages

  • In my iPhone 5s clock alarm sounds i have songs that i didn't sync to my iPhone but are purchased songs from years ago. if i accidentally select them it will end up on my phone in the music app. just annoying how.

    so i tried to resotre my iphone from new such and such. but then i go to my clock and then alarm, sounbds pick a song. theres all these songs that i didnt sync from my mac. theyre songs from years and years ago, a few CPUs back, songs that i dont even have on my mac. anyways how do i get rid of them or change a setting as to not see them?

    Hi Gregg,
    Have you tried resetting the device (nothing will be lost): Hold down the Home and Power buttons at the same time and continue to hold them down until the Apple appears (up to 30 seconds). Once the Home screen redisplays, see if your Music app is behaving normally.
    Cheers,
    GB

  • HT204053 i have 2 apple ids and one is from years ago when icloud wasnt a thought but now somehow it became my primary apple id and i cant photo stream with the apple id i use. Even if im signed into my old one the photo stream doesnt automatically go to

    i have 2 apple ids and one is from years ago when icloud wasnt a thought but now somehow it became my primary apple id and i cant photo stream with the apple id i use. Even if im signed into my old one the photo stream doesnt automatically go to my mac. Im not exactly technology savy but id love to figure this out.

    I have also noticed the same "problem".  I do not fully understand the impact of using the same ID on multiple computers and devices if I want to keep them all in sync.

  • Im having trouble changing my security questions, they are from years ago so i do not remember them and the reset email is no longer active,and i dont know how i can use the account because i added money to it but it asks for the questions. anybody help??

    im having trouble changing my security questions, they are from years ago so i do not remember them and the reset email is no longer active.., and i dont know how i can use the account because i added money to it but it asks for the questions. anybody help??
    this says it all..

    Welcome to the Apple Community.
    Contact Apple through iTunes Store Support, and explain that you have forgotten your 3 security questions, that you can reset your password, but doing so doesn't reset your security questions.
    Remember, support will receive hundreds, if not thousands of requests per day, some from people trying it on, others with little explanation and others that are written extremely poorly. Take the time to explain your situation properly, be precise and concise, brief but comprehensive.

  • Get week ending date from Year and Week Number

    I would like to display the week ending date in a Report.
    My dataset query has grouped the results by year and week number, so I am trying to construct the week ending date from year and week number.

    Week end date can be got as below
    =DateAdd(DateInterval.WeekOfYear,CInt(Fields!WeekNumber.Value) -1,DateAdd(DateInterval.Year,(Cint(Fields!Year.Value) - 1900),CInt("12/31/1899")))
    Please Mark This As Answer if it solved your issue
    Please Vote This As Helpful if it helps to solve your issue
    Visakh
    My Wiki User Page
    My MSDN Page
    My Personal Blog
    My Facebook Page

  • Anyone know how to stop the "activate" box from blocking usage of a perfectly legal copy of Ilisten? I want to help my dyslexic grandson and this box, including the activation code, keeps popping up, keeping me from using the software. I activated the pro

    Anyone know how to stop the "activate" box from blocking usage of a perfectly legal copy of Ilisten? I want to help my dyslexic grandson and this box, including the activation code, keeps popping up, keeping me from using the software. I activated the program and did a few profile building sessions, now it pops up each time I start the program, blocking me from using it. Help sure would be appreciated.
    Jay

    I looked at your post this morning and did not know enough to respond, other than to find out that links to iListen now go to newer, renamed software. Considering it's been nine hours with no response, I'm suspecting few people here have experience with that software. You could contact the current copmany that used to sell that package and see if they have any archived support info.
    BTW: please check you entry for "Mac OS" in your profile. It says iOS, which cannot run on an iMac. iOS is the system for phone and iPads but can't run on Mac computers. Do "About this Mac" from the Apple menu and see what it says about the OS version. Should look like this:
    If the "Processor" line says "Intel," you have a newer Mac than the old modles this forum covers; Intel iMac have their very own forum here:
    iMac (Intel)

  • Emails weirdly attaching older emails from years ago?

    Hi all,
    I recently used the Migration Assistant from an old G5 Mac across to a shiny new iMac. Quite a jump, from a product discontinued 6 years ago running Leopard to  Intel Chips running Mountain Lion.
    Migration Assistant didn't bring all my email boxes across, or any history of the older emails. My wife copied the Mail folder across from the latest version of the time machine backup and all my old Mailboxes (archives) appeared under "On my Mac".
    But now every time she sends me an invoice that is also CC'd to a client of ours, the email randomly picks a bunch of old emails with invoices and attaches them below. These can come from years back! What is happening? It's driving me a little nuts, and almost makes me want to switch to Thunderbird. (My mail has always been twitchy, even back on the G5, and so I'm wondering if this is one of those instances where I might need to consider migrating to other software for a while, and then one day migrating back again, just to get rid of the bugs!)

    OK, now that's embarrasssing!
    I'll try it out when I get home. Cheers!

  • I recently switched from years of PC to iMac ( OSX 10.7.5) and need to batch convert thousands of old WordPerfect files (many without an apparent file extension) into my new Microsoft 2011 Word.  I am a computer nitwit and am hoping for some simple sol'n.

    I recently switched from years of PC to iMac ( OSX 10.7.5) and need to batch convert thousands of old WordPerfect files (many without an apparent file extension) into my new Microsoft 2011 Word.  I am a computer nitwit and am hoping for some simple solution.

    Try reindexing the mailbox. This can take awhile if you have a lot of mail.
    Reindex messages.
    If that doesn't work try deleting MessageUidsAlreadyDownloaded3.
    Quit the application.
    You need to look in your user Library. Either hold down the option key while using the Finder “Go To Folder” command and select your user Library in your home folder or use the Finder “Go To Folder” command and enter ~/Library/Mail/V2/Mail Data/MessageUidsAlreadyDownloaded3.  Move the file to your desktop.
    Open the application and test. If it works okay, delete the file from the desktop.
    If the application is the same, return thefile to where you got it from, overwriting the newer ones.
    If you prefer to make your User library permanently visible, use the Terminal command found below.
    Show User Library
    You might want to bookmark the command. I had to use it again after I installed 10.8.5. I have also been informed that if you drag the user library to Finder it will remain visible.

  • CWB-Need to change the eligible salary column from yearly to monthly

    Hi All,
    I need to change the eligible salary column from yearly to monthly at Employee Allocation from Compensation Workbench.
    Kindly help me guys
    Regards,
    Sajid

    You can change the activity reference period in the Plan Form - > Not In Program tab from annually to monthly. However, it will impact all the calcuations as it will use monthly values for everything. Please be careful of this. I would suggest testing this (along with posting back the increases to ensure they are annual amounts) before proceeding with this.

  • I purchased Adobe Acrobat Professional and have been trying to activate it for some time.  I also had this same program on my previous computer.  How do I de-activate it from that computer so that I can activate it on my new computer?

    I purchased Adobe Acrobat Professional and have been trying to activate it for some time.  I also had this same program on my previous computer.  How do I de-activate it from that computer so that I can activate it on my new computer?

    Hi larrygoynes,
    To transfer the license from one pc to another the step you have to follow is to 'Deactivate' the license first from the older machine.
    To accomplish this you need to Launch Acrobat, go to the 'Help' menu and select 'Deactivate'
    On the new machine you can install Acrobat and then use the serial number to 'Activate' the software and this will complete the license transfer.
    You can refer the KB Doc: Activation & Deactivation Help
    Regards,
    Rave

  • Question I am getting this error and see no place to change scripting?JavaScript is disabled in your browser. Please activate JavaScript from Tools Internet Options Security Internet Custom Level Scripting Active Scripting Enabled.

    JavaScript is disabled in your browser. Please activate JavaScript from Tools>Internet Options>Security>Internet>Custom Level>Scripting>Active Scripting>Enabled.
    These are the instructions for internet explorer but i can't see anything in firebox.

    In my Firefox 5.0 I see check-box for enabling/disabling JavaScript in the "Content" tab.
    Is it checked in your Firefox and JavaScript still not working?

  • How to give filters from Year level to day level in dashboard?

    Hi all,
    I have some 7 to 10 components and i want the filter from Year level to day (Year,Quarter,Month, Week and Day) with "All" option as default from Quarter to Day level.
    As default Only current year should be selected for which my components should display 4 quarters data
    and when any quarter is selected my components should display 3 respective months data
    then when particular month is selected then my components should display 4 weeks data
    when week is selected the 7 days data
    and last when day is selected only that days data should be displayed.
    All the data will be coming from Database, to get data we need to build query & prompts and map accordingly
    And those prompts should be mapped to these filters and work dynamically.
    If anyone know how to implement this please let me know.
    Regards
    Nithesh M R

    Hi,
    As you said try to prompts for all the above mentioned filtering criteria, then use the combo box as a drop down filter, In first combo box take year list. From second combo box take the data in Tree view using filtered rows insertion type. Below given link can give you a idea how to pass the subsequent values to the next cell.
    Instead of continent & country & ..... you can take quarter, month, week and so on, so your combo box fills the data automatically.
    Filtering Through Combo Box
    --SumanT

  • Activate 0MAT_UNIT from Business Content

    BW experts,
    I am trying to activate 0MAT_UNIT from Business content. Well I collected the object in the Business concent screen and clicked install. But in RSA1 I do not see this info Object. Did I miss anything?
    Thanks
    Ashwin

    Hi A .H. P,
    Well I got the solution from one of the SAP notes, it states that often because of the inconsistencies in the RSDIOBCIOBJ table this problem occurs and the solution to this is to execute the RSDG_IOBC_REORG function module in transaction SE37 (F8 -> single test) with the following parameters:
    Function module RSDG_IOBC_REORG
    Import parameter Value
    I_OBJVERS A
    I_PROGRESS
    I_IOBJTP *
    I_ALL_IOBJ X
    I_T_IOBJNM 0 entries
    I_BYPASS_BUFFER
    F8 -> Execute
    Refer Note 573421.
    This solved my problem. Just putting this up here if anyone in future come across the same problem.
    Thanks
    Ashwin

  • HOW TO ACTIVATE SCNNING FROM MY PRINTER

    HOW TO ACTIVATE SCNNING FROM MY PRINTER

    siyaam wrote:
    HOW TO ACTIVATE SCNNING FROM MY PRINTER
    Hi,
    And what is your printer and the OS on your compuyer ? No need to shout.
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Maybe you are looking for

  • Creating DOMAIN INDEX on INTERVAL PARTITIONING

    Hi ! I hava a problem, and I hope someone can help me! Two questions are asked below: 1. Main question: HOW CAN I SOLVE THIS PROBLEM, ARE THERE OTHER WAYS DOING THE SAME JOB (MAYBE FASTER) ? 2. Additionally: Is there a way to accelerate the deletion

  • Elements 6.0 won't open RAW *nef files from Nikon D40 - help!

    I tried to open *nef files from a D40.  Even though I selected RAW files in the open file menu, AE6 gives me an error message and won't open the files. How can I get these files to open with AE6?

  • Calendar object being buggy

    Hi, I'm not new to Java, but this seems like the best place for this question: I have some code dealing with parsing and reading schedules:        Calendar now = Calendar.getInstance();           Calendar startDateTime = (Calendar) startTime.clone();

  • Nokia 2330 contacts.

    Hey there, I wondering if anyone can help. I have a Nokia 2330 but the screen recently broke. All I can see now is roughly the top third of the screen. Obviously I need a new phone but unfortunately my contacts are saved to the phone, not the sim. Co

  • I want to transfer data

    i want t transfer data from one notebook to the next how do i do that?