Activate Block Organization Plan in Infotype 0001 when it copied

Hi All,
I want to activate block organization plan in infotype 0001 when I copy or  create that infotype.
I have tried to search any available resources in sap notes but couldn't find it.
How to activate this?
Thank you in advance,
MAL

Dear semvladigo ,
it's not about integration between PA and OM.
What I want to do is I want to copy infotype 0001 directly from PA30, and then change the percentage of the position directly without using Action (PA40).
I tried to copy it using PA30 but I cannot change the percentage because it is in grey out. How to make it possible to change the percentage directly.
Thank You,
MAL.

Similar Messages

  • Percentage field in infotype 0001

    while hiring a person, the percentage field in organizational plan of infotype 0001 is defaulted as 0.00, where as it should be actually 100.00.
    can any one help on what could be the possible reason and the slution.

    Hi,
    Go to PO03 then select the job /postion and then slect relattionship change mode and chenge the default percentage
    Thanks
    Paramshetty

  • Query on reading infotype 0001 using the macro rp-provide from last p0001

    Dear Friends,
            I have a question rgarding relating the infotype 0001 when we are using in the program the logical database PNP.
    iam using rp-provide-from-last p0001 space sydatum sydatum
            if pnp-sw-found eq 1.
            append p0001 into i_p0001.
            endif.
    iam getting a problem in production , in the selection screen iam passing for emloyee subgroup with multiple values option.
    i have passed E,H,S  -> where E means Executive , H means hourly and S means salaried employee...
    one particular scneario is iam having an employee whose
    employee subgroup is C (contactor) and on the selection screen if am passing this personnel no and on the selection screen iam only having in the multiple selection option only E,H,S but not C so this record should  should fail but it is getting success and appending to internal table i_p0001
    which is wrong
    , i mean to say the macro is getting success
    rp-provide-from-last p0001 space sydatum sydatum
    this employee .
    my question is will the macro will not check on the selection screen the employee gropu which we have passed and should i exclusively check
    if p0001-persk in pnppersk ?? or please let me knwo how to check this wrong employee not getting appended to my internal table.
    please let me know
    regards
    madhuri

    Hi Madhuri
      The macro rp-provide-from-last p0001 will not fetch data from the database, it simply extracts the last record from the available internal table P0001[]  for the time frame provided(as 3rd and 4th parameters). You can check the definition of the macro from the database table TRMAC, it simply uses the LOOP....ENDLOOP and IF conditions to arrive at the last record and populates the fields pnp-sw-found, pnp-sw-tabix.
        And coming to your problem, please check all the IT0001 records of the EE concerned, it can happen that the EE is attached to different employee subgroups in different time frames and hence the LDB is fetching all the available records of the EE (even if the employee subgroup is not among the one's selected in  the selection screen). If this is the case, I reckon, u've to perform manual check before appending to the internal table.
    Note:  The macro  rp-provide-from-last p0001 space sydatum sydatum will only fetch the valid IT0001record as on date - sy-datum

  • Not able to update organizations units in an infotype 0001

    Iam unable to update organizational units, positions through lsmw in an infotype 0001 if i do manually it is updating in 1infotype.
    Iam trying to run reports rhinteoo still not able to figure it out
    experts share your experience on this

    Ran LSMW Record created successfully for position
    If I see in organizational Assignment Infotype The record is not displaying
    As per your email Iam trying reports to display organizational units for the positions
    RHINTE10
    Done Livrun
    Next step RHINTE20
    My position is not in the list that is 600450
    Executed RHINTE30 I wonder how do we come to know personnel number when we are recording positions and organizational units. Still i checked personnel number in organizational assignment infotype and executed but it is displaying No batch input folder created . Yes we didnt create any batch input for personnel  numbers we created batch input for positions and org units.
    I believe we need to run first two records
    After running above reports i checked in an organizational assignment Infotype . Still data is not updating what would be the cause please let me know

  • PPOME infotype 0001 relation

    When I change the position by PPOM / PPOME for single Person, is not updated infotype 0001, Organizational Assignment, I see it by PA20.
    Although into the table T77S0 is set:
    PLOGI            ORGA                   X     Integration Switch: Organizational Assignment
    PLOGI            PLOGI                  02     Integration Plan Version / Active Plan Version
    The version 02 is active.
    What is missing ?
    Any assistance would be greatly appreciated.
    Thanks.
    Best regards.
    Eric

    Hi Eric,
    >PPOME is Transaction code in OM to maintain structure and IT 0001 is a Infotype in Personnel Administration.
    >There is no direct relationship but, when you maintain Position which is a integration point between OM & PA, it has a direct relationship to both the modules if the integration is active.
    >This issue is because the change what you made in OM is not updated in PA, this is a common issue and as other members already suggested you need to check the integration switches and run reports (RHINTE00, RHINTE10, RHINTE20, RHINTE30) to update the database both in OM & PA.
    Regards
    Chandrashekar

  • Purchase Requisition Workflow - Organizational Plan required?

    Hi,
    We are implementing purchase requisition workflow.
    Based on what I have read, it says that the workflow table (table V_T16FW) and SAP HR-PA-OM (organizational plan) must be set up to support the solution. 
    Question:  If we are routing the workflow to a UserID, i.e. Object Type = US (and not an HR data object like Position or Job), do we require an Organizational Plan to be also set up?
    Cheers,

    Thanks so much for your response.
    What about assigning tasks to users, etc. that is usually done in org plan, correct?  If object type US is only used, I assume this is not required either?
    Also, what is the benefit of using Object type = 'S', i.e. position?  At my company, most of the time, when people leave, the position is deleted and a new one is created (there are a couple reasons for this), which means, even if we did use positions, the workflow table would still need to be maintained everytime a person leaves/joins the company (I understand if only the user to position mapping changes, then it makes sense to use positions, and therefore the workflow table stays constant, and only the user to position mapping changes).  Are there any other benefits of using S instead of US?
    Also, is it possible to NOT use a workflow table, and ONLY define an organizational plan?  I was thinking to activate user exit M06B0001, and perhaps ONLY maintain an org plan, and use this to determine approver, rather than maintaining both MM workflow table and SAP Organizational Plan (HR-PA-OM).  Bottom line, we want to maintain as little data as possible.
    Your thoughts?
    Cheers

  • Changes in Infotype 0001

    Hi,
    Is it recommended to make all changes in Infotype 0001 like PSA, Administrators through action like "Organization Reassignment" or should be changed through PA30.
    What is a recommended practice especially when there is a need to change the admin?
    Regards
    Yashika

    Hi Yashika,
    When you open IT 01 in PA30 in change mode, some fields will be grayed out, these fields can not be changed without any personal actions.
    But the fields which are open for change, there we need to decide whether the employee was any time in that PSA or Administrator job.
    If he was there for some period of time then we need to create a new record in IT 01 by copying the old record and changing the specific field. If the data was maintained wrongly then we can simple change the existsing record.
    Br/Manas

  • Change organizational plan - workflow

    Hi experts,
    the client asks me to develop a routine in order to update, automatically, the agents of workitem when organizational plan changes. Is this possible in SAP ECC 6.0 ? Are there tables which track changes to organizational plan? Are there any exit on organizational plan save?
    Thanks and regards
    Antonella

    You can make use of the following business Object
    ORGUNITEXT Enhanced Organizational Unit
    PDOTYPE_SH HR Position
    PD_1001    PD Infotype Relationship (1001)
    Check whether any event is getting triggered for this BO when you are changing Organization Plan and use accordingly.
    Thanks
    Arghadip

  • Error while adding user in organization plan

    Dear all,
    When I try to add user in organization plan through users_gen, it raises an error 'Action cancelled'. Currently this user has only 1 node in the plan whereas it should have 4.
    What can be the problem?
    Regds
    Amit

    Dear Anita/Muthu
    Thanks for your replies. Note 1055921 is not relevant for my process. Email Id etc is maintained for the user.
    I have made one single user through SU01. Then I am using USERS_GEN, I am giving country code, org ID. Then system asks " area of user", I enter the userid. After that, this error comes.
    Default country is US and no tax system is there in SPRO. I am using SRM component version 5.0.
    I am lost!
    Regards
    Amit

  • Additional field in Infotype 0001

    I manage to add an additional field in the infotype 0001 in Dev client. I have a bit concern when to apply it in the production client.
    Do you have any experience to share on this?

    hi
    test in development server later test in testing server later send it to production server
    nothing to worry
    all the best

  • [MRS] Conflict in Infotype 0001 between A and S object type

    Hi,
    We use SAP MRS on top of our HR box. (sorry, I am not a SAP MRS expert so bear with me please....)
    As we activated PA-PD integration, whenever a Work Center (otype A) is assigned to an employee (otype P), it updates the Infotype 0001 accordingly (PLANS and OTYPE field) while also inserting a new entry into T528B and T528T tables.
    This is consistent with what the RHINTE30 program does (look at the $plste [S] and Work Center [A]):
    But, the employee is also assigned to a position (otype S)! It makes much more sense to have Position filled in the Infotype 0001 rather than Work Center!!
    Thus, our first approach would be to deactivate PA-PD integration for Work Center (otype A) and only leave it active for Position (otype S).
    Thanks in advance for your help.
    Best regards,
    Guillaume

    Guillaume,
    Has your issue ever been solved?
    Kind regards,
    Lieselot

  • Using FM HR_INFOTYPE_OPERATION to update infotype 0001.

    We're using FM HR_INFOTYPE_OPERATION to update the infotype 0001 (Organisation). We basically have the Cost center field grayed out on the entry screen so can not update it via BDC, which the cirrent method that we use to create new employees, based on data passed in from a third party system. When then attempt to update the employee record (using Copy) and the FM mentioned.
    We first get the details of the infotype using FM HR_INFOTYPE_GETDETAIL, and this work perfectly, returning all the information required. We the update the structure returned by the RECORD parameter and then use the FM HR_INFOTYPE_OPERATION, like so:
        call function 'HR_INFOTYPE_OPERATION'      
          exporting                                
             infty         =  '0001'               
             number        =  gs_p0001-pernr  
             SUBTYPE       =                       
             OBJECTID      =                       
             lockindicator = 'X'                   
             validityend   = '99991231'            
             validitybegin = gs_p0001-einda   
             RECORDNUMBER  = '001'                 
             record        = gs_p0001             
             operation     = 'COP'   
             nocommit      = 'X'             
       importing                           
        return        = gt_bapireturn1   
        key           = gs_bapipakey     
    exceptions                          
        others        = 1.            
    However, we receiving an error in the gt_bapireturn1 itab basically giving the error PG 184. When I look up the error it basically says that to update this info type we need an exclusive lock, which I would have thought exists when using the LOCKINDICATOR parameter. The previous FM ( HR_INFOTYPE_GETDETAILS) returns blank against the SPRPS fileld (Lock indicator) when reading the infotype data, so it's not previously locked or anything.
    We're using version 4.0b, which I know is pretty old, but surely this update should work.
    Has anyone encountered this problem before, and, do you think I should be able to update this field even though it's grayed out on the screen ?.
    Jason
    Edited by: Jason Stratham on Mar 16, 2010 11:41 AM

    I read that I should be using the enqueue and dequeue FM's despite the LOCKINDICATOR parameter.
    This I have now done, but am now receiving an error PG 428 'A complex application error has occurred', but I'm none the wiser in knowing why this error has occurred. Has anyone encountered this error before?.
    I'm beginning to feel that despite being told that I can use the HT_INFOTYPE_OPERATION  function module it may well purely imitate the front screen processing, which does not allow us to change the cost center value. Is there any way that this might be done. We're on version 4.0b, and I'm sure that in later version there might be a BAPI that almost directly updates it. I guess there's no such method for 4.0b?.
    Jason
    Edited by: Jason Stratham on Mar 16, 2010 12:06 PM

  • BUS1065 - SAP HCM - Employee changes in infotype 0000 + infotype 0001

    Dear all,
    I have a problem with the customizing in order to recognize the changes in infotype 0000 + infotype 0001 for employees.
    What do I want?
    If there is a new hire, a rehire, a retire or a company-left action, I want to start ONE workflow in order to dispatch the employee data to several satellite systems considering the new validity dates.
    What happens currently?
    I maintain a rehire action through transaction PA40 and the system raises several events so that the workflow start multiply, meaning raises event hired, rehired, companyleft, ...
    My customizing:
    TCode: SWETYPV
    BO BOR-Objekttyp     BUS1065     COMPANYLEFT     WS91000007     0
    BO BOR-Objekttyp     BUS1065     HIRED     WS91000007     0
    BO BOR-Objekttyp     BUS1065     POSITIONCHANGED     WS91000007     0
    BO BOR-Objekttyp     BUS1065     REHIRED     WS91000007     0
    BO BOR-Objekttyp     BUS1065     RETIRED     WS91000007     0
    TCode: SWEHR1
    P     Person     0000                                                                      BUS1065
    P     Person     0001                                                                      BUS1065
    TCode: SWEHR2
    P     Person     0000     Maßnahmen                                        APP          100     BUS1065                                          CACS_LOG_HRINFTY
    P     Person     0000     Maßnahmen                                        DEL          100     BUS1065                                          CACS_LOG_HRINFTY
    P     Person     0000     Maßnahmen                                        INS          0     BUS1065                                          HR_EVENT_RULES_PA0000
    P     Person     0000     Maßnahmen                                        INS          100     BUS1065                                          CACS_LOG_HRINFTY
    P     Person     0000     Maßnahmen                                        UPD          0     BUS1065                                          HR_EVENT_RULES_PA0000
    P     Person     0000     Maßnahmen                                        UPD          100     BUS1065                                          CACS_LOG_HRINFTY
    P     Person     0001     Organisatorische Zuordnun                                        APP          100     BUS1065                                          CACS_LOG_HRINFTY
    P     Person     0001     Organisatorische Zuordnun                                        DEL          100     BUS1065                                          CACS_LOG_HRINFTY
    P     Person     0001     Organisatorische Zuordnun                                        INS          0     BUS1065                                          HR_EVENT_RULES_PA0001
    P     Person     0001     Organisatorische Zuordnun                                        INS          100     BUS1065                                          CACS_LOG_HRINFTY
    P     Person     0001     Organisatorische Zuordnun                                        UPD          0     BUS1065                                          HR_EVENT_RULES_PA0001
    P     Person     0001     Organisatorische Zuordnun                                        UPD          100     BUS1065                                          CACS_LOG_HRINFTY
    TCode: SWEHR3 (For testing purpose only one entry)
    P     Person     0000                                                                      INS          1     BUS1065     HIRED
    Can anybody tell me how I can customize our system so that the system raises only event hired for a new employee hire and e.g. companyleft event for a termination action?
    Thx you all in advance for your support!!!
    In case you need more information, don't hesitate to contact me!
    Kind regards,
    André

    Hi
    TCode: SWETYPV
    BO BOR-Objekttyp BUS1065 COMPANYLEFT WS91000007 0
    BO BOR-Objekttyp BUS1065 HIRED WS91000007 0
    BO BOR-Objekttyp BUS1065 POSITIONCHANGED WS91000007 0
    BO BOR-Objekttyp BUS1065 REHIRED WS91000007 0
    BO BOR-Objekttyp BUS1065 RETIRED WS91000007 0
    Iam not sure about what you have done in the customizing but, the above settings represents that the same workflow is set as receiver for different events.
    Now As per my understanding what ever you have posted, I feel like you want to restrict the workflow intiiation only for some of the events. and for the remaining events you do not want to start the workflow.
       If this is the case then I would suggest that to over come any kind of issues, I suggest you take a copy of the workflow WS9100000070 and assign the new workflow template to each different event, in this way you can differentiate which workflow is acting as a receiver for the event.
    and accordingly you activate the Event Linkages in SWE2 txn too.
    Regards
    Pavan

  • ALE Message type HRMD_A Infotype 0001 is incorrect using PROOF flag = X

    Hi
    We have an issue using HRMD_A for Infotype 0001 with the PROOF flag swithed on. Using the PROOF flag triggers a call of HR_MAINTAIN_MASTERDATA instead of a direct write to db tables. However sometimes the update of Infotype 1 is incomplete and records are lost. The data goes through a transformation in the inbound BAdi, here I have checked the sequence is still correct. But when the data is written to Infotype 1 it seems to overwrite the last entries.
    If anyone has any experience with this, I would be very interested for any input.
    Thanks in advance
    Sonny

    Hi Sandip
    Thx for your response. If I understand you correctly you suggest I use the HR_INFOTYPE_OPERATION. This could be an alternative, but I would prefer to understand the reason behind the error.
    HR_INFOTYPE_OPERATION actually calls HR_MAINTAIN_MASTERDATA, so this FM might not solve the issue, but it does give the option for updating one record at a time.
    Sonny

  • How to configure PI user in organization plan?

    Hello SRM guys,
    When transfer external purchase requirement from ECC to SRM, PI user is needed assigned to organization plan. My question is: Which role should be assigned to PI user.  Which attribute should be configred in organization plan.
    Any one know about this?
    Envirement: SRM Server 7.0
                           ECC EHP 4.
    Thaks.

    HI Justin,
    You can assign a organization unit say EBP_EXT_CHANNEL under your root node or the node which has all the required attributres to create a SC for backend category.
    THe PI user should have the following roles :
    /SAPSRM/EMPLOYEE
    /SAPSRM/OP_PURCHASER
    SAP_XI_APPL_SERV_USER
    Hope this helps
    Regards
    Sam

Maybe you are looking for