Activate change list error

Hi all,
    when I select change list tab in Integration Builder Configuration and activate objects the following error message appear:
The progression of time as shown by the database timestamps was in reverse direction. See integration 77 into versionset ff496181e6c311d892c2000f206a353d (that timestamp was:2004-08-18 17:56:32.0). Current timestamp is:2004-08-18 16:27:25.902. This was detected when integrating vsid=2d104851f12711d8b220000f206a353d into the target versionset.
What can I do??????
Thanks in advance,
        Michele Lazzarato.

Dear Mr Lazzarato, 
18.08.2004 17:39:22
please have a look at note 733902!

Similar Messages

  • Activate change lists error - Communication with JMS server failed

    Hi,
    I have this error message prompted when I try to activate my design object in Integration Builder :-
    <i>Communication with JMS server failed Repeat the last action. If the problem continues to occur after multiple attempts, contact your system administrator to check the availability of the JMS provider service.</i>
    Anyone knows where should I fix the errors ? Many Thanks in Advance.
    regards

    Hi,
      I think you should check the JMS Provider service in the Visual Administrator.
    Have a look at those help pages:
    <a href="http://help.sap.com/saphelp_nw04/helpdata/en/90/57849e5e3e45d784afc4e3bfa8136f/frameset.htm">JMS Administration</a>
    <a href="http://help.sap.com/saphelp_nw04/helpdata/en/a9/ad3d9ef22e4b2ea9752de8d98db5a4/frameset.htm">JMS Provider Service</a>
    Best regards,
    Manuel

  • Activate change list received Communication with JMS server failed errors

    Hello XI Gurus,
    The first time when we tried to activate the change list in Integration Repository (Design) or Integration Directory(Configuration) we received an error message below.
    "Communication with JMS server failed
    Repeat the last action. If the problem continues to occur after multiple attempts, contact your system administrator to check the availability of the JMS provider service."----
    However, the second time went through, but the changes will not effected unless we do a refresh CACHE in order to see the changes.
    This happened on any of the interfaces in Repository and Directory.
    NW 7.0 SPS9
    Greatly appreciate for any helps!
    Dave

    Hi David,
    Logon your SAP J2EE Visual Administrator,
    go to 'Serverxxx"->Services
    ->JMS Connector
    and
    ->JMS Provider
    Ensure that everything is running smoothly, no red cross. If so, restart the service
    If you need to redeploy the JMS, go to 'Deploy', select 'Container' and navigate to the JMS connector to do the redeployment.
    Cheers,
    Aaron

  • STANTDARD CHANGE LIST ERROR WHILE ACTIVATIING IN INTEGRATION BUILDER

    hi,
    i am getting error while activating the design in integration builder.
    ERROR is given below:
    Check result for Software Component Version bapiget| BAPIGETDETAIL_2 | 2.0 | 0:  Standard error type ExchangeLogData for namespace urn:laxmi:getdetail is in another change list  Software component version must be activated together with standard error types in the same change list
    Please help.
    Thanks

    Hi Bhushan,
    I thought You had not activated the software component and name space which you were created was not activated.Pls check it once if they are not activated,try to activate that and proceed.
    Thanks

  • Error while activating the object from change list in IR

    Hi Friends,
    I am trying to activate a mapping object taken from History.But I am getting error "version management was unable to execute the last action because temporary internal lock has been set" while activating from change list.
    Regards,
    Suresh.

    Hi Suresh,
    have a look at the integration builder start jsp. There is a Link "Administration". On this page, on the left side, you can click on "lock overview" and check if your object is locked. Then you can remove this lock.
    Best Regards
    Sven

  • Activation of the change list canceled Error Message

    I am getting the following error message every time I try to Activate or Test my message mapping :
    Activation of the change list canceled Check result for Message Mapping bww2jb_activate | http://bww.bit.com/card:  Mapping not sufficiently defined
    Anyone have any idea what could be causing this?

    Hi Andrew,
    You have not mapped some of the mandatory parameters in your mapping and tried to activate it. so it was  giving you that error. So map all the mandatory parameters ( all the fields with Red bulb), save and then activate.
    This will solve your problem. kindly assign points if this solves your problem.
    Cheers,
    Siva Maranani

  • Error during activation of change list

    I want to activate my changes in the change list of the intergration configuration. After activation I receive the error message:
    unerwarteter Fehler bei Nachrichtenverarbeitung:
    javax.transaction.HeuristicMixedException:
    com.sap.engine.ts.exceptions.BaseHeuristicMixedException: One or more
    XAResources were not commited because of Exception in the second commit
    phase.
    at com.sap.engine.services.ts.jta.impl.TransationImpl.commit
    (TransactionImpl.java:451)

    Hey Gregor,
    This link talks about the status of change lists:-
    http://help.sap.com/saphelp_nw04/helpdata/en/f6/719a2172f74b67b150612a7cd3b7df/frameset.htm
    and this one shows how to organize change lists:-
    http://help.sap.com/saphelp_nw04/helpdata/en/ab/3adb41083f6024e10000000a1550b0/content.htm
    I hope they are helpful.
    Regards
    Sushumna

  • Multi-mapping activate changes error

    Good afternoon!
    I want to use multi-mapping to split one IDoc(WBBDLD04) to some xml documents.I want XI to create one xml document per segment E1WBB01 of WBBDLD04 IDoc. I set Occurrence = 0..unbounded for target interface in interface mapping . Then I try to activate changes. IX generate errors:
    MaterialMasterRequestMapping | http://sap.com/xi/SBO:
    A multi-mapping with multiple source or target interface instances is only recommended with asynchronous interfaces, since only a mapping of this type can be used in the process editor. IDoc WBBDLD.WBBDLD04 | urn:sap-com:document:sap:idoc:messages are not asynchronous abstract interfaces
    Mapping program Message Mapping MaterialMaster2SBO_GT2 | http://sap.com/xi/SBO does not match the interface mapping. The number or frequencies of source or target messages for the message mapping are not identical to the number or frequencies of source or target interfaces.
    Tell me please, what I do wrong?
    Thanks!
    Lositskiy Alexandr

    Alexandr,
    You need to create an Abstract from your IDoc (Message Interface).
    To use mutli mapping, you need to create a Business Process.  Then in your Business Scenario, use your Business Process and reference your multi map.
    Hope this helps.
    Regards,
    Simon

  • Error when trying to activate changes

    Hi,
    I'm using WebLogic 9.2.2 on Solaris 9. When I try and set my server start arguments to
    -server -Xms1024m -Xmx1024m -XX:NewSize=64m -XX:MaxNewSize=64m -XX:PermSize=256m -XX:MaxPermSize=512m -XX:SurvivorRatio=4 -verbose:gc -XX:+PrintGCTimeStamps -XX:+PrintGCDetails -XX:+PrintHeapAtGC -XX:+HeapDumpOnOutOfMemoryError -D_Offline_FileDataArchive=true -Dweblogic.connector.ConnectionPoolProfilingEnabled=false -Dcom.bea.wlw.netui.disableInstrumentation=true -Dweblogic.wsee.useRequestHost=true
    But I get this error upon clicking "Activate changes" in the WebLogic admin console:
    An error occurred during activation of changes, please see the log for details.
    [Deployer:149150]An IOException occured while reading input. : with response code '500' : with response message 'Internal Server Error'
    But when I look in the server log in question, there are no stack traces or error messages. Here's the screen shot from the admin console -- http://screencast.com/t/w0QxRWtRa. Any help on how to troubleshoot this problem is greatly appreciated, - Dave

    Dave - Did you ever get a solution for this problem? We are facing the same problem with 10.3.4. When I try to activate a datasource or app changes via the weblogic console, I get the following exceptions:
    Admin Server Error
    ####<Dec 9, 2011 3:26:20 PM EST> <Warning> <Deployer> <nykpsr8224> <AdminServer> <[STANDBY] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1323462380586> <BEA-149078> <Stack trace for message 149004
    java.rmi.RemoteException: [Deployer:149150]An IOException occurred while reading input. : with response code '500' : with response message 'Internal Server Error'
    at weblogic.deploy.service.internal.transport.http.HTTPMessageSender.sendMessageToServerURL(HTTPMessageSender.java:303)
    at weblogic.deploy.service.internal.transport.http.HTTPMessageSender.sendMessageToTargetServer(HTTPMessageSender.java:125)
    at weblogic.deploy.service.internal.transport.CommonMessageSender$1.run(CommonMessageSender.java:301)
    at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:528)
    at weblogic.work.ExecuteThread.execute(ExecuteThread.java:207)
    at weblogic.work.ExecuteThread.run(ExecuteThread.java:176)
    Managed Server Error
    ####<Dec 9, 2011 3:26:20 PM EST> <Warning> <DeploymentService> <nykpsr8224> <node2> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <c36a43
    37f9da31a5:-1a05dae9:134247b7581:-8000-0000000000000048> <1323462380580> <BEA-290064> <Deployment service servlet encountered an Exception while handling the deployment service message for r
    equest id "1,323,462,350,539" from server "AdminServer". Exception is: "java.net.SocketTimeoutException: Read timed out
    at jrockit.net.SocketNativeIO.readBytesPinned(Native Method)
    at jrockit.net.SocketNativeIO.socketRead(SocketNativeIO.java:32)
    at java.net.SocketInputStream.socketRead0(SocketInputStream.java)
    at java.net.SocketInputStream.read(SocketInputStream.java:129)
    at weblogic.socket.JSSEFilterImpl.readFromNetwork(JSSEFilterImpl.java:404)
    at weblogic.socket.JSSEFilterImpl.read(JSSEFilterImpl.java:383)
    Any help is greatly appreciated.

  • 'Inverted Threshold' error on 'Activate Changes' after queue creation

    Hi,
    In Weblogic Server Administration Console I am trying to create a new Queue by first clicking 'Lock & Edit' and thereafter creating the Queue. When I do this I get an expected: 'The JMS Queue was created successfully' message but, when I then try to click 'Activate Changes', I get an: 'Inverted threshold' error message.
    Log file shows: <Failure occurred in the execution of deployment request with ID '1368101884686' for task 'weblogic.deploy.configChangeTask.2'. Error is: 'java.lang.IllegalArgumentException: Inverted threshold' java.lang.IllegalArgumentException: Inverted threshold
    Any ideas what this error actually means?
    Thanks in advance.

    Hi Vijaya,
    Thanks for the response but I don't think this error has anything to do with a queue's Message Threshold values. The weblogic server has a number of JMS modules and on one JMS module, Queues can be created and activated successfully but not on the other JMS module. I am not too familiar with Weblogic AS so I am not sure how to track down the source of the error. The best error info I get from the logs is the following:
    *<May 9, 2013 4:39:40 PM BST> <Warning> <Deployer> <BEA-149004> <Failures were detected while initiating redeploy task for application 'CommerceJmsModule'.>*
    *<May 9, 2013 4:39:40 PM BST> <Warning> <Deployer> <BEA-149078> <Stack trace for message 149004*
    java.lang.IllegalArgumentException: Inverted threshold
    at weblogic.messaging.kernel.internal.StatisticsImpl.addThreshold(StatisticsImpl.java:190)
    at weblogic.messaging.kernel.internal.StatisticsImpl.addByteThreshold(StatisticsImpl.java:179)
    at weblogic.messaging.common.ThresholdHandler.replaceBytesThreshold(ThresholdHandler.java:115)
    at weblogic.jms.backend.BEThresholdHandler.setTarget(BEThresholdHandler.java:59)
    at weblogic.jms.backend.BEDestinationImpl.open(BEDestinationImpl.java:267)
    Truncated. see log file for complete stacktrace
    java.lang.IllegalArgumentException: Inverted threshold
    at weblogic.messaging.kernel.internal.StatisticsImpl.addThreshold(StatisticsImpl.java:190)
    at weblogic.messaging.kernel.internal.StatisticsImpl.addByteThreshold(StatisticsImpl.java:179)
    at weblogic.messaging.common.ThresholdHandler.replaceBytesThreshold(ThresholdHandler.java:115)
    at weblogic.jms.backend.BEThresholdHandler.setTarget(BEThresholdHandler.java:59)
    at weblogic.jms.backend.BEDestinationImpl.open(BEDestinationImpl.java:267)
    Truncated. see log file for complete stacktrace
    *>*
    *<May 9, 2013 4:39:40 PM BST> <Error> <Console> <BEA-240003> <Console encountered the following error weblogic.application.WrappedDeploymentException: Inverted threshold*
    at weblogic.messaging.kernel.internal.StatisticsImpl.addThreshold(StatisticsImpl.java:190)
    at weblogic.messaging.kernel.internal.StatisticsImpl.addByteThreshold(StatisticsImpl.java:179)
    at weblogic.messaging.common.ThresholdHandler.replaceBytesThreshold(ThresholdHandler.java:115)
    at weblogic.jms.backend.BEThresholdHandler.setTarget(BEThresholdHandler.java:59)
    at weblogic.jms.backend.BEDestinationImpl.open(BEDestinationImpl.java:267)
    at weblogic.jms.backend.BEQueueImpl.open(BEQueueImpl.java:99)
    at weblogic.jms.backend.BEDestinationRuntimeDelegate.initialize(BEDestinationRuntimeDelegate.java:163)
    at weblogic.jms.backend.BEQueueRuntimeDelegate.initialize(BEQueueRuntimeDelegate.java:59)
    at weblogic.jms.backend.BEDestinationRuntimeDelegate.prepare(BEDestinationRuntimeDelegate.java:187)
    at weblogic.jms.module.JMSModule$EntityState.setState(JMSModule.java:1704)
    at weblogic.jms.module.JMSModule$EntityState.setState(JMSModule.java:1667)
    at weblogic.jms.module.JMSModule$EntityState.access$100(JMSModule.java:1608)
    at weblogic.jms.module.JMSModule.prepare(JMSModule.java:277)
    at weblogic.jms.module.ModuleCoordinator.prepare(ModuleCoordinator.java:185)
    at weblogic.application.internal.flow.ModuleListenerInvoker.prepare(ModuleListenerInvoker.java:93)
    at weblogic.application.internal.flow.DeploymentCallbackFlow$1.next(DeploymentCallbackFlow.java:387)
    at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:37)
    at weblogic.application.internal.flow.DeploymentCallbackFlow.prepare(DeploymentCallbackFlow.java:58)
    at weblogic.application.internal.flow.DeploymentCallbackFlow.prepare(DeploymentCallbackFlow.java:42)
    at weblogic.application.internal.BaseDeployment$1.next(BaseDeployment.java:615)
    at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:37)
    at weblogic.application.internal.BaseDeployment.prepare(BaseDeployment.java:191)
    at weblogic.application.internal.SingleModuleDeployment.prepare(SingleModuleDeployment.java:16)
    at weblogic.application.internal.DeploymentStateChecker.prepare(DeploymentStateChecker.java:155)
    at weblogic.deploy.internal.targetserver.AppContainerInvoker.prepare(AppContainerInvoker.java:60)
    at weblogic.deploy.internal.targetserver.operations.RedeployOperation.createAndPrepareContainer(RedeployOperation.java:98)
    at weblogic.deploy.internal.targetserver.operations.RedeployOperation.doPrepare(RedeployOperation.java:122)
    at weblogic.deploy.internal.targetserver.operations.AbstractOperation.prepare(AbstractOperation.java:217)
    at weblogic.deploy.internal.targetserver.DeploymentManager.handleDeploymentPrepare(DeploymentManager.java:723)
    at weblogic.deploy.internal.targetserver.DeploymentManager.prepareDeploymentList(DeploymentManager.java:1190)
    at weblogic.deploy.internal.targetserver.DeploymentManager.handlePrepare(DeploymentManager.java:248)
    at weblogic.deploy.internal.targetserver.DeploymentServiceDispatcher.prepare(DeploymentServiceDispatcher.java:159)
    at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.doPrepareCallback(DeploymentReceiverCallbackDeliverer.
    java:157)
    at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.access$000(DeploymentReceiverCallbackDeliverer.java:12
    at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer$1.run(DeploymentReceiverCallbackDeliverer.java:45)
    at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:516)
    at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
    at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
    *>*
    Any other thoughts would be much appreciated!

  • Can not activate standard change list due to Not enough spaceq

    Hello All,
    I am trying to activate my XI repository changes on standard change list. I am unable to activate my standard change list due to can not not enough space.
    I think that the problem might be I have more than 14 name spaces under one software component with more objects under individual name space.
    Please advise how to activate it?
    Many Thanks!
    Raghu

    well try to activate each object one by one
    dont activate the change list as a whole !!!
    (just a suggestion)

  • Cannot activate or rejected change list in Integration Builder

    I cannot activate any object in Integration Builder, and Activation and Reject buttons are not active in change lists too
    What can be the reason?
    PS: there is no problem in Integration Directory.
    Thanks

    Hi,
    This could be due to improper authorization, ask you basis to check your authorizations.
    You can see about XI user authorization in below link .
    http://www.erpgenie.com/sap/netweaver/xi/xiauthorizations.htm
    Regards,
    Sarvesh

  • Activation of the change list canceled

    Hi Guys
    I am doing the SOAP to FILE Scenario using BPM when I activate my Integration Processes (Soap_to_file_BPM ) i get the below error, on my IM the source is "yonela_ob_mi" and the target is "yonela_ob_mi_AS" which is my abstract.Then on the Transformation step my container is Abstract Interface. This "yonela_ob_mi" interface I am using on my message mapping
    So what am I doing wrong
    Activation of the change list canceled Check result for Integration Process Soap_to_file_BPM | http://yonela.com:  Expression must return the interface type yonela_ob_mi
    Thanks
    Yonela

    Hi Guys
    Thanks for ur assistance its working the error is gone, I only needed to make both my Interfaces to be Abstract as u suggested.
    Only one error now when testing on sxmb_nomi I get the bellow error: What I want to do is to split flat file and send it to my ftp server (InBound) folder.
    On my have MM i have created Node Function the is spling by value
    <?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
    - <!--  Request Message Mapping
      -->
    - <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
      <SAP:Category>XIServer</SAP:Category>
      <SAP:Code area="MAPPING">GENERIC</SAP:Code>
      <SAP:P1>Split mapping created no messages</SAP:P1>
      <SAP:P2 />
      <SAP:P3 />
      <SAP:P4 />
      <SAP:AdditionalText />
      <SAP:ApplicationFaultMessage namespace="" />
      <SAP:Stack>Split mapping created no messages</SAP:Stack>
      <SAP:Retry>M</SAP:Retry>
      </SAP:Error>
    Thanks
    Yonela

  • Problem in activating change lists

    hello every one,
            here i am new to XI. i am doing some R&D regarding the activation of IR objects. At first i can see all the objects including the software component version created under one standard change list. i just tried to activate the software component alone. on the next second it created another change list giving some error. please any one guide me how to overcome this problem.

    When you add name space into your software component version, you have to activate three objects first:
    The Modified SWCV
    Two default fault data types.
    If you do not do above first, then you created other objects, you won't be able to activate all of them once.
    You still need to select three object I mentioned in the list, activate them first, then activate other objects later.
    Hope it helps.
    Liang

  • [ConfigFwk:390105]Unable to create WLS change list due to a short term automatic lock obtained by user null

    Hi,
    I am getting this error while trying to activate a session in OSB (clustered env with 3 nodes). I have a OSB project which listens to a JMS queue. I was able to create the project fine and was able to activate the session, no issues. But when I tried to update the queue name or delete the project itself, this error gets thrown:
    [ConfigFwk:390105]Unable to create WLS change list due to a short term automatic lock obtained by user null. The user has no pending changes and the lock will expire in 600 seconds. Please try again after the lock has expired.
    Retrying after those seconds takes me back to the same error but the time get's reset to 600 sec.
    I can change the code in that project and activate the session without any issues but if I change any configuration for proxy/business services or delete the project itself, i get this error. the only way to get around this issue is to clone the project and make changes to the cloned project. But, that is not the solution i am looking for as I don't want to keep a old version of the project and don't want to keep creating new queues everytime (since no two proxies can point to the same queue).
    Oh, and this happens only with the projects which deal with JMS queues.
    We are using OSB:
    Oracle Service Bus Version: [Oracle Service Bus 11.1 Sun Dec 18 03:49:34 PST 2011 1447174]
    Oracle Weblogic Server Version: [WebLogic Server 10.3.6.0.10 PSU Patch for BUG19637463 TUE NOV 04 15:54:42 IST 2014]
    Please help.
    Thanks,
    Mukund.

    Hi,
    I am getting this error while trying to activate a session in OSB (clustered env with 3 nodes). I have a OSB project which listens to a JMS queue. I was able to create the project fine and was able to activate the session, no issues. But when I tried to update the queue name or delete the project itself, this error gets thrown:
    [ConfigFwk:390105]Unable to create WLS change list due to a short term automatic lock obtained by user null. The user has no pending changes and the lock will expire in 600 seconds. Please try again after the lock has expired.
    Retrying after those seconds takes me back to the same error but the time get's reset to 600 sec.
    I can change the code in that project and activate the session without any issues but if I change any configuration for proxy/business services or delete the project itself, i get this error. the only way to get around this issue is to clone the project and make changes to the cloned project. But, that is not the solution i am looking for as I don't want to keep a old version of the project and don't want to keep creating new queues everytime (since no two proxies can point to the same queue).
    Oh, and this happens only with the projects which deal with JMS queues.
    We are using OSB:
    Oracle Service Bus Version: [Oracle Service Bus 11.1 Sun Dec 18 03:49:34 PST 2011 1447174]
    Oracle Weblogic Server Version: [WebLogic Server 10.3.6.0.10 PSU Patch for BUG19637463 TUE NOV 04 15:54:42 IST 2014]
    Please help.
    Thanks,
    Mukund.

Maybe you are looking for