Activate change logs for the table V_T007K

Hi,
Change log check box is activated in table and change logs is activated in system. But still I am not able to view any change logs recorded for the table V_T007K using SCU3 transaction.
I tried by changing some data and than checked the SCu3 transaction. nothing is recorded against the table.
Please let me know what needs to be done to capture the change logs for the changes done to the data in the table V_T007k table.
Thanks in Advance.
Thanks & Regards,
Madhuri.

Hi
The table u mentioned V_T007k is not a transparent table
.its a view only for views u cant track changes.
But only for transparent tables u can only track changes thru SCU3
Also u can find the changes in a table from SAP TABLE
CDHDR and CDPOS.
if helpful reward me points.
Regards
Manas Ranjan Panda

Similar Messages

Configure the Change Log for the activity

Hi to all,
I would like to know if it is possible to configure the "change log" for the activity.
Thanks in advanced,
Matte

Carlos,
Can you be more specific on the term 'Configure'. Change log is automatically generated by SBO. The only thing you can change is the numbers of Historical instances of the log
Administration > System Initialization > General Settings.......Services Tab...History or Log Settings. Be default it is 99 instances.
Suda

Change logs for Z table.

Hi All,
I am trying to fetch the old value and new value for the z table field.Change log is activated for the Z table. but i dont know how to fetch the change logs.
SCU3 is the standard transaction to see the change logs for all the tables.
Is there any table where the change logs values are maintained?
Does anyone know how to get the change log value?
Thanks in advance.
Regards,
Amruta.

Hello,
If for a specific set of tables no change documents are triggered by SAP you can always setup your own Change Document Object with transaction SCDO.
Of course you need to be careful with this transactions (how big is the table data, how many changes, etc...).
Table logging is something else, they are stored in table DBTABLOG and can be analysed via SCU3.
For table logging you need extra system parameters to be set, they are explained in SAP Note:
Note 1916 - Logging table changes in R/3
Pay attention with table logging because a lot of tables are logged in DBTABLOG once you activate the parameter, this can have a major impact on performance.
To have an idea what other tables will be logged, check tcode SE16 on table DD09L and put an 'X' in field PROTOKOLL, result will be thousands of tables.
In your specific scenario I think it is best you go for the change documents with SCDO.
Wim Van den Wyngaert

Table which gives all change log for the Documnets( Contract)

Hi folks,
I need to know wchich table will capture all the change log in documents (contratc, quotaion , sales order)
please let me know the Table name where i can get change log details when i input the order no.
Its very urgent please let me know ASAP.
Thanks,
Ravi
Edited by: raviraju nadimpally on Sep 4, 2008 9:28 PM

Hello,
check these tables CDPOS, CDHDR
Prase

How To See Change Log For A Table Entry

Hi Experts,
One entry is created in a table. I want to know, when that entry was created/ changed.
Is there a way to find it out.
PLZ NOTE: Table doesn't contain any DATE field.
Regards

Hi,
or else do like this...
In order to maintain the log changes the main pre reuisite is to checkmark the checkbox in dataelement of table filed.
To do this...
goto transaction SE11>enter ur table name>cleck on fields tab>cleick on dataelement->click on Furthercharacterstics tab-->select the checkbox'Change Document'.
If u dont select dis the u cannot see the log entry of the particuylar field..Do like this for each dataelement for each table field...selecting all the fields is not mandatory..u can choose the table field u want to see the log report..
Once u done with dat...
Goto SCDO transaction> click on create>give a name change doc startwith Z or Y only>Follow the prodedure and in-->name of table field>enter u r TABLE NAME->click on individual field checkbox.--->insertentries..
Once u done with dis..
Goto SE16->enter CHDIR or CDPOS->press ENTER->enter u r object id>F8
U can see the new and old value of a table entry.....

Create change log for Z tables in XD02/XD03

I have added a new tab, to customer master screen. The new screen under that tab has 4 fields,
those 4 fields are inserted into Z table.
Can you please give me the sequence of steps so that system will show change history with Z fields?
I checked that fields are set for change document.
I have created change document using SCDO.
How to use method GET_FIELDNAME_FOR_CHANGEDOC of CL_IM_V_CUSTOMER_ADD_D_CS class and method GET_CHANGEDOC_FOR_OWN_TABLES of CL_IM_V_CUSTOMER_ADD_DATA class?

Hi,
I have a similar problem with MK02 (vendor master).
I tried with appending a user field to LFA1.
I hand over the table and fieldname (LFA1-Z....) in parameter E_FIELDNAME of method VENDOR_ADD_DATA_CS.GET_FIELDNAME_FOR_CHANGEDOC .
With method GET_CHANGEDOC_FOR_OWN_TABLES of BAdI VENDOR_ADD_DATA I provide the objectclass 'KRED' to the standard program.
However, there is no change document created for changes on the appended field. If I change one of the standard fields the change document is created.
Do I have to put my own coding for change document creation somewhere in the BADI methods?
Any idea?
Thanks,
Holger
Edited by: Holger Probst on Apr 28, 2010 1:30 PM

Change Documents for the table EKET

Hi ,
We create a purchase order from ME21N . We do have some data for delivery schedule for the data .
This delivery schedule data gets stored in tabe EKET . When this PO is processed from V_V2 the dates
in the delivery schedule are overwritten and he new values will be even in the table EKET . When I follow
the navigation Environment -> Item Changes I dont see the changes documents for these fate fields . I did
debug through the FM EINKBELEG_WRITE_DOCUMENT to see but it looks like it is not captuirng the fields .
Now my requirement is to find where the change documents can be found for the date changes in the delivery
schedule tab in the PO . The fields of interest are :
EKET-SFLDT , EKET-DAT01, EKET-MBDAT , EKET-LDDAT , EKET-WADAT .
I tried for some OSS notes too, but in vain . Can anyone please help to find out how we find the changes documents for these fields .
<b>Also please tell me if there are any OSS notes which explain us to extend the table EKET .</b>
Thanks and Regards ,
Varun .

HI ,
I did check the table CDHDR and CDPOS and also the change document is checked for the data element but no change documents are stored in CDHDR and CDPOS .
<b>Did anyone ever extend the tabke EKET ? Any OSS notes available for this .</b>
Regards ,
Varun .
Message was edited by: varun sonu

Function to create change log for any table

Hi
There is some FM which give me information what was changed in ztable for actually process.

I got.
It is BAL

How to get change log for z-fields in VBAk(Sales order)

Hi All,
Please help me in this.
My requirement is get the change log for z-fields in sales order.
In the sales order header level we have one tab Additioanl data.
In this we have z-fields, if we change any of the field value, it is accepting the same and updating in data base as well.
But it is not appearing in change log<. I.e. Environment->changes.
How to get the change log for the z-fields.
In data element level enable the check box of change document.
Please help me in this.
Thanks in advance
Jaya,G

Hi Jaya,
For this you need to do some coding. Here is a link which tells you, step by step procedure how to activate Change log for the Z tables.
THe Object that you need to use for Sales Document is VERKBELEG
[https://wiki.sdn.sap.com/wiki/display/ABAP/Maintaining%20Change%20Log%20for%20Database%20Tables]
Hope this helps..
This is Primarily a Technical Consultant Job. Take his help before you make any changes.
Thnks
Srini

Activating change documents for standard tables

Hi all,
Can someone please tell me how I can activate change documents for a standard table.
I created a change document object in SCDO and included the standard table I am working with. This table does not have "LOG DATA CHANGES' enabled in its technical settings. I checked the data element of the field I am interested in and it has "Change Document" enabled.
Is there any way to activate change documents for a std table without writing code to create change documents?
Thanks.

Hi,
Check this transaction SCU3, this is to activate the change logs for the tables.
Regards,
Satish

What is the impact - Activating Change Logs for Material Classification Dta

To activate Change Logs for Material Classification Data I must first set the flag for "Multiple Objs Allowed" for the Class Type 001 Material Class. I am curious of what the impact of setting this flag will be. Also, is there a way to measure the DASD impact of activating the Change logging for this data.
Thankyou
Kevin

In addition to the performance impact the process of turning on Change Logs for Classification data will convert the tables KSSK and AUSP to use an internal SAP number as a key instead of the Material number. This will cause problems for any custom programs that access those files directly and expect the material number to be the key. This file conversion occurs during the execution of program RCCLUKA2 which is used to Flag the change logs for existing records. This can be reversed by running report RMCLINOB. Because of the above impact we decided here to NOT implement this change in production.

Change Logs for TCODE -- FILE

Hi Friends,
    Please help me in finding the change logs for the TCODE FILE,
    i.e The changes made to the Logical paths
   I had tried Utilities---->change logs , but unfortunately i cannot find any changes logs
   But there are changes made to the logical paths in my system but i cannot see them in change logs
thanks
chandrasekhar j

rec/client is a profile parameter, you can view the settings in transaction RZ10. However I find program RSPARAM more useful, the report lists all system parameters with their default and altered value. Also if you double-click on a parameter you can get to the full help text for its meaning.
The parameter essentially switches on table change logging for configuration tables (based on the technical settings of the table) and has to be set before the changes are made.
Hope this helps.
Nick

Change Logs for Infotypes !!

Hi,
How do i activate Logs for an Org Infotype ? Can I do this for Custom Infotype too ?
Thanks in Advance !!
Naveen

Hi Naveen,
Please refer the following steps in SPRO
Position Budgeting and Control ->Automatic Commitment/Budget Creation ->Basic Settings ->Activate Recording of Financing Relevant Infotype Changes ->Define Relevant Object Types for Change Log
Here, you can define the object types for which you want to monitor the changes
Position Budgeting and Control ->Automatic Commitment/Budget Creation ->Basic Settings ->Activate Recording of Financing Relevant Infotype Changes ->Define Infotypes Relevant for Change Log
Here, you can define the infotypes that you want to monitor.
Finally, make sure the change log is activated at the below step
Position Budgeting and Control ->Automatic Commitment/Budget Creation ->Basic Settings ->Activate Recording of Financing Relevant Infotype Changes ->Activate Change Log for Infotypes
I hope this helps you.
Regards,
Swapna.

Change Log for a Ztable

Hello,
I have a requirement to get the change log of a Ztable and i have check the LOG Table change in Technical setting and also maintained respective entries in RZ11 with help of Basis.
But still i am not able to see the changes thorugh SCu3 Tcode.
I have seen FM /BEV2/ED_READ_DBLOG but was not able to use the same to track DGTABLOG changes.
Kindly suggest and view.
Thanks
Ritesh

Go to AUT10, press F9.
Then enter the table name in field Table Name.
Then press execute.
Also check the blog Find Changes Logs for a table using SM30
**Edited by: Dëv Päträ

Change logs for Order

How to capture the change logs for the order.

Use CO03 transaction to display the production order.
Click on the i adjacent to the status, use menu path Extras --> Change documents
which will display if the change management is active.
Hope this helps you.

Activate change logs for the table V_T007K

Similar Messages

Maybe you are looking for