Activate components in controlling area

Hi All,
Please explain me on this.
What is Activate components in controlling area.
Why should we maintain active or not active for components.
COST CENTER, AA:ACTIVITY Type, Order management, Commit. management, Profitanalysis, Acty-based costing
Why should we click on radio button for Profit center acctg, Projects, sales orders, cost objects, real estate mgmt.
w. commit. mgt
Why should we click on, All currencies, variances, cocd validation.
Thanks & Regards,
Raghu

Hi
Now something good. Profitability analysis (COPA) is a component using which you can analyse your profitability from different dimensions such as product,dealer,sales area, sales organisation and so on. If COPA is in the scope of project then only it has to be activated.
Hence Profitability analysis is not required to activate at the initial times in co area as it automatically when you activate your operating concern.
Activity based costing again, should be activated on the client requirement only.
Regards
Rajneesh Saxena

Similar Messages

Activate projects in controlling area RCPL in 2011

Dear sir
i am create WBS , Ofter goods issue on MB1A ,MVT 221 , ofter enter wbs that time below error is come
"Activate projects in controlling area RCPL in 2011"
please provide ofter create WBS how to assign wbs over company,

Hi
Now something good. Profitability analysis (COPA) is a component using which you can analyse your profitability from different dimensions such as product,dealer,sales area, sales organisation and so on. If COPA is in the scope of project then only it has to be activated.
Hence Profitability analysis is not required to activate at the initial times in co area as it automatically when you activate your operating concern.
Activity based costing again, should be activated on the client requirement only.
Regards
Rajneesh Saxena

Control indicator in controlling area

Hi all,
While I am trying to create a purchase order the system throws an error that controlling area does not have any controlling indicators .Message no KI102 .Please let me know how to solve this . I have created my new enterprise structure in IDES 800 client .
I am providing the procedure the system in prompting
"Check your entries or define control indicators for controlling area 1500, fiscal year 2008 in configuration. Make sure that the fiscal year in the control indicators is a "from" fiscal year"
Plz let me know where I will maintain it .

Hi
The control indicators are actually the components you have to activate for your controlling area before u use it. U have to make the components active which u want to use in CO module.
Transaction code: OKKP
Here u also specify if the same controlling area can be used in other company codes.
The transaction is necessary for usage of CO
thanx
alok

De activation of Controlling Area

Hi,
We have got a situation that we need to de activate the existing controlling area and create a new controlling area as per the mutual agreement between our co & the client.
and we have got 1:1 ratio between controlling area & company code
Now the system will not allow me to delete the company code assignment from the controlling area as the master data exists for this particular company code.
how do i proceed with this kind of situation.
My concerns are
1. How do I assign the company code to a new controlling area which has already been assigned to a particular controlling area.
2. Now if i go with the new controlling area which i have created then how does the system respond to the old open item data which has been entered for old cost centres,profit centres.
What will happen when i start clearing this transactions how does the system responsd to this kind of situations.
Kindly advise
Regards
Sunil

Hi Sridhar,
Thanks for your prompt response but I have 2 queries.
1. Will the system allow me delete the master datas when there is transaction data which exists in the masters for which we want to delete.
2. Secondly what will happen when i try to clear the open item which have been booked under a particular cost centre and profit centre which were assigned to my old controlling area and when i start clearing the old items with the new controlling area activate how does system respond to it.
Will it allow me to clear these transactions/allow processing of the old data which had been fed in the old controlling area.
Plz help me out in this.
Regards
Sunil

Activate project management in controlling area

Hello,
Activate project management in controlling area..
Is this activity must for PS/CO??
Thanks.

hi
yes. if you use Project system

Activate Cost Component Split in Controlling Area Currency

Hello,
I have controlling area currency USD and company code currency INR. When I do WIP run then system is giving error messages "contr.area currecy is missing" and "not find valid cost component structure" and suggesting to maintain "Cost Component Split in Controlling Area Currency".
When I maintain then after that I am not able to run CK11N for std.cost estimate only with the error "cost componenet spit costed with zero" and also system giving this message on front screen of ck11n, means not allowing to go into ck11n result screen.
Could you please give me some tips or check point on this issue.
Thanks
Regards
Ravi

I'd revert to the Cost Component per Co Area currency config that you were forced to delete (as per your other post) - but this time, just for a Costing Type or a specific Val Variant and check the results.
Maybe that'll throw some light... also check if you maintained all the Exchange Rate config in your system... check General Settings for all the config that is required.
Cheers.

Creation of a new controlling area

I'm trying to create a new controlling area (trans. OKKP).
In folder "activate components/control indicators", I wanted to activate Profitability Analysis but the field was in grey and was not possible to change from "component not active" to one of the other activation possibilities.
I need to know what to do to change this field.
The client is working with COPA and this set-up was done before to assign the controlling area to the FI company.
The SAP version is 4.7

Dear.
You can activate that through tcd KEKE.
You know, Before that, Operating concern must be maintained.
Regards.

Company code Vs controlling area.

Hi Friends,
Please let me know if i can assign one company code to multiple controlling areas.
If no how do i know which company code aviliable to assign.
Regards,
krishna.

Hi,
It is not possible.
CONTROLLING AREA:Controlling Area is a Organizational unit that represents a closed system for Cost Accounting purpose.
To this purpose you need to maintain Controlling Area. To this Controlling Area you need to activate the components of
Controlling for a fiscal year.
To this Controlling are you have to assign your Company Code. A Controlling Area may be used 2 or more Company Codes.
That is called CROSS COMPANY CODE COST A/C. If you are using common Controlling Area for 2 or more Company Codes then you
need to maintain consistency of the following.I.
CHART OF A/C                : must be same for all Company Codes.II.
FISCAL YEAR                  : must be same for all Company Codes.III.
PERIOD & CLOSING              : must be done at the same time.
currency                      : it may be different.
for one controlling area you can maintain multiple Company Codes but for one Company code you can maintain only one
controlling area.
let me know if u need more information.

Reg. Control indicators for controlling area NCCP do not exist

Dear Experts
I want to create purchase requisition (ME51N) then the following error occured. Pls help me.
Control indicators for controlling area NCCP do not exist
Message no. KI102
Diagnosis
No control indicators exist in fiscal year 2008 for controlling area NCCP.
System Response
No further processing is possible without valid control indicators in the controlling area.
Procedure
Check your entries or define control indicators for controlling area NCCP, fiscal year 2008 in configuration. Make sure that the fiscal year in the control indicators is a "from" fiscal year.
Thanks
Rajakumar.K

Hi
Goto SPRO-> IMG-> Controlling-> General Controlling-> Organization-> Maintain Controlling area->
Select your controlling area & Click on Activate components/control indicators & Activate the compnnents
Cost Centers
Order Management
ProfitAnalysis
Acty-Based Costing
Select the Check boxes below them & Save the details
This should solve your issue
Thanks & Regards
Kishore

Assign Controlling Area to Financial Management Area

Dear SAP Gurus!
I'm greatly distraught! I have been reading SAP HElP. I'm using ECC 6.0.
It says that to assign Controlling Area to Financial Management Area, I can go to the following menu path:
Enterprise Structure >> Assignment >> Controlling >> by choosing Assign controlling area to financial management area
However I'm not able to find the node "Assign controlling area to financial management area" in IMG.
I'm trying to activate Fund Managment within CO area and therefore would like to assign controlling area to financial management area. Currently I have created company code and controlling area and have also assigned the controlling area to the company code.
I would appreciate greatly your advise and feedback, thanks!
Regards,
Distraught!

Hi,
The FM area is not derived from a direct assignment of the organizational unit of Controlling, from the Controlling Area, to an FM area, rather from an indirect one.
The FM area is determined via the company codes assigned to the controlling area to which the FM area is assigned, whereby the company code is determined from the CO objects
You can deactivate the unrequired FM components from "Deactivate Account Assignment Elements in Controlling" which is in BCS.
Regards

Control indicators for controlling area donot exist"

I have created one po order for which I am getting the error as"control indicators for controlling area donot exist"
Can some body tell me me how to solve ths issue and wt settings needs to be done in IMG
Regards
Chitra

Go to OKKP Transaction code.
Select your controlling area and double click on activate componentes/control indicators (Left side).
Now, maintain Fiscal year... and Activate cost centers etc., and save the data.

Control indicators for controlling area IBM1 do not exist

hi,
Can any one tell me abt this plz--
Control indicators for controlling area IBM1 do not exist
Message no. KI102
Role VN not defined in master record for vendor SITA
Effective price is 802.01 INR, material price is 1,000.00 INR
Please help me
Thanks And Regards,
Swathi

Hi,
Go to "OKKP" and maintain under option "Activate components/control indicators"

Control indicators for controlling area 1573 do not exist

Hello All
Control indicators for controlling area 1573 do not exist
Message no. KI102
Diagnosis
No control indicators exist in fiscal year 2009 for controlling area 1573.
System Response
No further processing is possible without valid control indicators in the controlling area.
Procedure
Check your entries or define control indicators for controlling area 1573, fiscal year 2009 in configuration. Make sure that the fiscal year in the control indicators is a "from" fiscal year
1573 is my company code as well as my controlling area
This is happening in my sandbox server from to day morning only as it looks like somebody has tampered the settings which doesnot allowing me to create a sales order itself to do any testing
I am totally handicapped and without solving this error i will not be able to proceed at all
This error has come for the first time whilre creating the sales order
Waiting for your valuable inputs
Regard
Raja

Hi,
Please go to OKKP and see the validity period of controlling area FROM year to TO year.
OKKP
Select controlling area
Double click
Activate components/control indicators.
I believe somebody must have deleted the year.
You need to enter the control indicators FROM year to TO year.
Please let me know if you still have issues.
Regards,
Ravi

Control indicators for controlling area

Hello,
I am new in PTP process. While creating purchase requisition, I am getting following error(Detailed error message, diagnosis and procedure to resolve(given by SAP) is attached below). Can somebody please tell me how to resolve this problem step by step?
Error Message-
Control indicators for controlling area AB01 do not exist
Message no. KI102
Diagnosis
No control indicators exist in fiscal year 2009 for controlling area AB01.
System Response
No further processing is possible without valid control indicators in the controlling area.
Procedure
Check your entries or define control indicators for controlling area AB01, fiscal year 2009 in configuration. Make sure that the fiscal year in the control indicators is a "from" fiscal year.
Regards,
Milind Dumbre

Hi,
Go to OKKP Transaction code.
Select your controlling area and double click on activate componentes/control indicators (Left side).
Now, maintain Fiscal year... and Activate cost centers etc., and save the data.
regards
Anand.

Configuration Controlling Area

Hi expert,
I have a problem about configuration profitability analysis in controlling area (CA).
I created a new CA. When I try to configure in folder "Activate components/control indicators" the ProfitAnalisys, the options are not editable.
How can I configure the ProftAnalysis in CA?
Thanks a lot
Nicola

HI,
this is not triggered from OKKP T-code but if your controlling area is assigned to an operating concern in "Enterprise structure / Assignment / Controlling / Assign controlling area to operating concern".
Best regards, Christian

Activate components in controlling area

Similar Messages

Maybe you are looking for