Activate data in ODS

Hi Gurus,
Im loading data from ods to ods thru full update and after that I have to activate that ODS,
Kindly let me know the steps for activating the ODS,
right click on the ods and press activate data n ods
or before i have to do Update ods in data target.
Raj

1ST we have to go for ODS in Data target and right click on the ODS.
In that options click on Generate Export Data Source.Then go to Source system to identify the Data Source.
It will starts with 8 later What everyou had given the ODS name you have to give in Search.
Later you have to create infopackage for that ODS and load data in to that IP.
next come to Data Target and create the new ODS.
Give the update rules with the data source what ever you had created now.
later you have to create info Package for that ODS and load the data for that IP.
Hope it will helps you..........

Similar Messages

Strange problem when activate data for ODS

Hi experts,
I work as BI 7.0. I have one ODS called Sales Order Line, some fields is not exist in Datasources but they need to be filled data in this ODS. I used endroutine to filled these fields with data take from another ODS (Sales Order Header). After executing DTP I check new data table, these fileds are filled as I want, but the problem is: after activate data, these fileds are empty. very strange. Anyone, pls tell me the reason and how to fix it. 10 point will be assign for good answer.

Check if activation is successfull...try to check the table if you see these figures here...this is active table...
/BI0/A"ODS NAME"00
also the active table has data record in aggregated form, so one case may be you already have data with reverse sign for these fields for a particular key combination and now you have loaded with different sign so both got cancelled...
Thanks
Tripple k

How to activate data in ODS using ABAP code

Hi
Question like in subject.
THX
Adam

Hi........
U can use Program : RSDG_ODSO_ACTIVATE ...........During activation the M version will be read.
There are two other options besides the activation:
Check only >> this will only check consistency of the ODS and no activation will be executed
Clean up DDIC structures >> this deletes old generated tables, which were only necessary in previous releases
Also check this link..............it is very useful.......
https://www.sdn.sap.com/irj/scn/wiki?path=/pages/viewpage.action%3fpageid=35458
Regards,
Debjani........

No data in ODS

Hi Friends,
I dont see any data in my ODS, My loading went fine, then I went to my ODS , Right click > Activate data in ODS , what must be the problem??
thanks in advance,

ODS >Context Menu>Manage
Go to content tab, check the tables (active, new). It should be in one of the tables.
Is activation over?

Data in ods

Hai Experts,
Can any body tell me data is present in active data table, new data table, change log table and as wel as with this there is a content button it is asking for the table name what is that button consists of can any body help me out
Regards,
Vikram

Hi Vikram,
If we right click ODS --> go to Manage --> contents Tab
You will find three Tables
1. New Table : when you load Data initially it gets into New Table and if you click on that you can see the Content
2. Active and Change Log : when you Activate data in ODS the Data moves from new to active and change log Tables and used for futher processsing to other Data Targets like Cube or ODs again.
Change Log Table records all the changes happend to the data.
Check this blog for more info
/people/raj.alluri/blog/2006/11/24/the-tech-details-of-standard-ods-dso-in-sap-dwh
Hope this helps,
Sudhakar.

Activating Data in ODS

Hi
I have got one ODS, for which my infopackage is desigen as do not update data if no master data exists for a characteristic.
But one of my request which is having only the entries in master data, is not getting activated in ODS.Its failing with the error "No SID found for value '00DU023R ' of characteristic 0MATERIAL". but the material 00DU023R is not there in the request at all.
Doest anyone phased this scenario before? how to activate the data in ODS?
Regards
Sriram

Hi Sriram,
What SSree is trying to see.
Go to your ODS, right click manage.
In the requests tab, choose a very old date and choose refresh. Now check if you see any red requests. These requests will prevent from activating.
On the other hand, when I see your first error, I would go to transaction RSRV, and do some consistency checks on your ODS and master data.
kr,
Tom

DBIF_RSQL_SQL_ERROR while activating data in ODS

Hi,
I'm getting the following error when I try to activate the data in ODS. This is happening for all the ODSs in the system.
SQL-ERROR: 603 ORA-00603: ORACLE server session terminated by fat al error
System error: RSDU_ANALYZE_TABLE_ORA/ ORACLE
ABAP/4 processor: DBIF_RSQL_SQL_ERROR
Job cancelled
Any suggestion is greatly appreciated.
Thanks,
Vish

hi,
if not help, check oss note
840552
Symptom
On BW tables that belong to an InfoCube, statistics are calculated (COMPUTE) instead of estimated with the set percentage (ESTIMATE). This results in high runtimes.
Other terms
InfoCube, database, Oracle statistics
Reason and Prerequisites
In the Oracle-specific RSDU_ANALYZE_TABLE_ORA BW function, in some situations an estimation is made as to how many records are in the table to be analyzed. A SELECT in the USER_TABLES table is specifically used for this. If there is no value there now, 0 is returned and a COMPUTE is carried out. COMPUTE is considerably fasterer than ESTIMATE on small tables (under 10000 approximately).
However, if the table is too big and if the statistics were deleted by a brconnect run that ran shortly beforehand, the above situation of long runtimes mentioned above can occur.
Solution
BW 3.0B
 Import Support Package 27 or 3.0B (BW3.0B Patch 27 or SAPKW30B27) into your BW system. The Support Package will become available oncenote 723258 with the short text, "SAPBWNews BW3.0B Support Package 27", which describes this Support Package in more detail, is released for customers.
BW 3.10 Content
 Import Support Package 21 for 3.10 (BW3.10 Patch 21 or SAPKW31021 ) into your BW system. The Support Package will become available once <Z1>note 723263 with the short text, "SAPBWNews BW3.1 Content SP 21", which describes this Support Package in more detail, is released for customers.
BW 3.50
 Import Support Package 13 for 3.5 (BW3.50 Patch 13 or SAPKW35013) into your BW system. The Support Package will become available oncenote 783254 with the short text, "SAPBWNews BW SP12 NetWeaver'04 Stack 13", which describes this Support Package in more detail, is released for customers.
In urgent cases, you can use the correction instructions.
To provide information in advance, the notes mentioned may already be made available before the Support Packages are released. However, the short text in this case will still contain the words "Preliminary version".
769416

Error while loading data to ODS

Hello BW folks ,
I am getting an error while loading data to ODS from R/3 data source.
The error message is " Error in PSA".
We have deleted yesterday data from PSA for the related infosource/data source successfully .
Since then this error is occuring. Previously data upload was successful.
In Detail tab of monitor we are getting error message in Request option ( red Mark )
and the same request is not going to R/3 .
The related Job itself is not present in R/3 .
This looks very strange and new to me .
Could anyone help me in rectifying this issue ?
Thanks in Advance.
Best Regards ,
Amol.

Hello All,
Thanks for reply.
I tried to replicate the data source once again and activate the transfer rules in BW Production by running program in SE38 = RS_TRANS* activate all tranfer sturctures , then I got an error message that one infoobject is added to transfer rules in BW Production .
But interestingly the same Transfer rules do not have this infoobject in BW Development server . So I create once again a request for Transfer rules in Dev and transported it to BW production.
and This solved the problem
The error message in Monitor was " Error in PSA " and then request itself was not going to R/3 . But the real issue was with Transfer rules. So after rectifying it we have solved the problem of data upload.
Best Regards ,
Amol Kulkarni.

Error while loading data from ODS to IC.

Hi Experts,
             I am trying to load data from ODS to IC using Initial load. I failed first time. Then when I am trying to schedule it again I am getting a error message. I deleted the intial request. Even after that, I am getting the following message. Am I missing something?
Delete init. request
REQU_BQQCBQV5ZK9YEBB416C8QXXLC before running
init. again with same selection
Also can any one provide me a document that contians the lenght of all teh technames? I know I can find it out by looking into each one of the Tech Names. But I would be nice if anyone of you can provide me a document.
Can anyone of you please help me.
Thanks,
Nandini.

Hi,
By reading the error:
No transfer structure for InfoSource 8ZYNA_ODS and source system B3TCLNT800
I think the problem is actually with a Datamart. You can try to regenerate the export datasource and activate it.
Also, you can try to activate only the transfer structure again using the report "RS_TRANSTRU_ACTIVATE_ALL".
I hope this helps!
Pietro

Inconsistencies data between ODS and RSA3 in SAP system (delta problem??)

Hi everyone,
I have a problem in my SAP BW production system. There is inconsistencies data between ODS (using tcode LISTCUBE) and Datasource in SAP system (tcode RSA3).
I'm using Datasource: 0FI_GL_10 and ODS: 0FIGL_O10.
In SAP system (using RSA3):
GL Account: 1202012091
Comp Code : 5400
Bus Area: 5401
Fiscal Year :2008
Period: 07
Accum Balance : $0
Credit Total: $350
Debit Total: $350
Sales : $0
And in ODS (using ListCube):
GL Account: 1202012091
Comp Code : 5400
Bus Area: 5401
Fiscal Year :2008
Period: 07
0BALANCE : $350 (it should be $0,shouldn't it? )
0CREDIT: $0 (it should be $350,shouldn't it? )
0DEBIT: $350
0SALES: $350 (it should be $0,shouldn't it?)
I have tried these :
1. Check if there is a start routine / routine or not in transfer or update rules....and...i get nothing
2. Check the data using tcode FBL3N..but the data is ok
And then i tried to trace the process chain and find error on delta infopackage which pull these data
Date
07.30.2008 : 231141 records --> error (ODS activation) --> request has deleted forever
07.31.2008 : 2848 records --> error (ODS activation) --> request has deleted forever
08.01.2008 : 135679 records --> error (ODS activation) --> request has deleted forever
08.02.2008 : 135679 records --> successfull repeat delta action
From 30 July until 1 August there is an error on delta infopackage because
fail to activate ODS (No SID found for value 'RIM' of characteristic 0UNIT). On 2 August someone delete the red requests and repeat the delta and success. Is there any possibilities that this problem arise because of this? If this the cause, how to bring back 2848 and 231141 records which has deleted?
Thank you and Regards,
-Satria-

Hi everyone,
I have solved my problem. I executed my infopackage again (selection condition using GL Account which have wrong amount) with update mode 'Full update' and choose Scheduler > Repair Full Request and tick the checkbox.Thank you.
Regards,
-Satria-

How to update DSO data in Data targets (ODS data into Data Targets)

Hi,
In 3.5 version we have a option Update ODS data in Data Targets
to Transfer Data From ODS to Info cube.
In 7.0 How to transfer DataStore Object data to Info Cube, I can't find
Update DSO data in Data Target option.
can any body Help me to solve this problem.
Thanks
prasanna

Hi prassna,
0RECORDMODE are auto generated infoobjects which are requried to be mapped if you are going for a delta update from your DSO otherwise you can proceed further without mapping the 0RECORDMODE and neglect the system generated warning
check this for the Creation of data targets
 In left panel select info provider
 Select created info area and right click to create ODS( Data store object ) or Cube.
 Specify name fro the ODS or cube and click create
 From the template window select the required characteristics and key figures and drag and drop it into the DATA FIELD and KEY FIELDS
 Click Activate.
 Right click on ODS or Cube and select create transformation.
 In source of transformation , select object type( data source) and specify its name and source system Note: Source system will be a temporary folder or package into which data is getting stored
 Activate created transformation
 Create Data transfer process (DTP) by right clicking the master data attributes
 In extraction tab specify extraction mode ( full)
 In update tab specify error handling ( request green)
 Activate DTP and in execute tab click execute button to load data in data targets.
cheers
Sunil

Reloading of deleted data from ODS to cube

i have deleted the data from the cube using selective option in the cube. Now i want to reload the deleted data. Since i have data in ODS i am loading it into cube. But it is doing a full update which i don't need. I wanted only the deleted data to be reloaded from ODS. Since i have some routines and rules in the cube. i am deleting the cube and reloading the data. Could anyone suggest

Hi Pooja.........
R u aware of it that which value u hav deleted................if u know that..........then run full IP with selection......In the Data Selection tab u give the selection........provided that field is included in the Data selection tab..........if not and if u hav authorization........then u can go to RSO2.....in the source system....Give the datasource name.........go to change mode .........Check the selection box for that field.......then activate the datasource............again replicate it.............then Activate the transfer rule using the program : RS_TRANSTRU_ACTIVATE_ALL.........
Then that field will be available there for selection..............But do this if it is must to do the load in this way..............
Hope this helps......
Regards,
Debjani.......

Not able to activate data in DSO

Hi Gurus,
We are new to BI 7 . We are trying to load data into DSO . we followed the procedure :
1)created flatfile
2)created data source, clicked on proposal tab.
3)created infoobjects(data type,length,.....)according to the proposal.
4)created infopackage and loaded the data PSA
5)created DSO with settings "activate Data target"....
6)created transformation
7)run DTP.
data is coming upto new table(data is successfully loaded till here,green), data is not moving into active table .tried both the ways of activating but no use.it is not giving any concrete error msg,it says "time out"(red).
Pls let me know if thr is any other procedure of loading daa into active table.
Thanks,
Praveen

I put ny 2 cents here ..could be that you are running the activation job in DIALOG mode and hence timing out..
You may want to execute the activation process in BACKGROUND mode with dedicated 1 BGD process in RSODSO_SETTINGS tcode.
Fyip ..
DSO Setting - Activate Data
Also check for sm21 and st22 logs ...
Hope it Helps
Chetan
@CP..

Append data in ODS

Hey Folks,
I load data into an ODS, weekly. The data contains status information of a product.
The source system delivers only data where the status has changed.
If the status for on product is constant over two or more weeks, I get no record of this product for the current week. But I want to display the status for this product in the current week.
So I need to insert records in my ODS for all products where I don't get a record from the source system for the current week.
I got the information that I need a start routine and implement my logic with ABAP
There are any other ways, or can somebody explain me, how to do this with ABAP?
Thanks for your help!
Stephan

Hi Stephan,
Please try this logic.
Load the transaction data for the ODS weekly as per you source sytem data.
Now you need to update based on constant status. You can write a ABAP program with the below logic.
Create internal tables for Master Data and ODS and read all the contents into it.
Get the details from Master Data and manually update the status field (No data from source system)and store it in a internal table (Internal table - Same strcuture as that of active records table /BIC/AZ***)which has records to be appended to the ODS.
Append it to the active records table of the ODS.
Hope this helps.
Thanks,
Srinivas.

Deleting data in ODS

HI Kudos!
Please let me know the methods of deleting the data in ODS of all the tables before and after activation. Let me know if any blogs are there.
thanks in advance.
kalyan Pidugu.

Hi Kalyan,
As Malli mentioned those are the ways you can delete the data...again it depends on the update mode used for data loads. If it is a delta load from R3 make sure u mark it as red before deleting so you dont loose data from subsequent deltas.
if it is full update and if u wish to delete it u can simply delete it coz BW will mark it as red.
What is it do u want to know abt activation?
Assign points if useful
Arun

Activate data in ODS

Similar Messages

Maybe you are looking for