Activate datasource at quality and production

hi
can i activate datasource at quality an dproduction by RSDS_DATASOURCE_ACTIVATE_ALL
or from dev to need to send request only?

Hi,
This program can be used in any case...ilke timestamp error or if the data source in gettng inactive after transport in production or any reason for the data loads are not working because of data source issue ..... other then change in the structure of the datasource.
so use it whereever if it can help...there is no condition to use it...but structure changes must be done through transports.
Thanks
Ajeet

Similar Messages

How to Transport changes from Dev. to Quality and production

Hello Friends,
I've done the below changes in IR
1.Added idoc in Imported Idocs
2.Added new Interface Mapping
3.Added new Message Mapping
In ID:
Chagned Receiver Agreement
Changed Interface Agreement
Please let me know how i can move the changes to Quality and Production..
Pls. provide me the steps to create Transport and how to transfer.
Thanks in advance!!!
Best Regards
Prasad

Hi,
By using File system or cms you can transport, better to do the configuration steps manually to avoid ther errors.
We can do some changes to move
Moving Dev to QA changes
1.SLD: are there any changes we need to do.
If you have common SLD, then I doubt if you may need any changes on SLD side.
The Business systems you had used will be the same you may use in Q-Landscape.
2.IR: are there any changes we need to do.
---> No changes required, you need to export .tpz file from Development box and have to import it in Q-box
3.ID: do we need to recreate it fully or after importing,just change the Communication channels will
do.I am confused here.
You need to reconfigure all communication channels, if SLD changes are OK then business system will
change automatically and in communication channel just filled in correct IP/password etc.
---> Similar to IR, you can transport these objects also. But you may need to do related changes to communication channels, if you will be referring to different Sender systems and Receiver systems.
Then as mentioned in previous posts you may need to maintain those Business systems in SLD also.
4.RWB: such as alerts,and if there are any...
--> The Alerts will not be transported....you need to create it as new setup for every box.
Check this link
http://help.sap.com/saphelp_nw04/helpdata/en/09/88f339db9911d2b41a00609419f767/content.htm

Deploying BO universes and webi reports in quality and production

Hi
We are on BO XIR2 SP5 and reporting on SAP BI Infocubes and Queries.
We have 3 environments setup,each for development,quality and production.
During universe development,while creating a new connection we provide the IP address of application server,username ,password,system id,client number etc details.
The above details would defer for 3 different environments.In our case we have built around 50 universes.
So what would be the smart way of deploying these universes in each of the other 2 environments?Because changing universe connection details would mean re creating the universe classes and objects which would be a huge effort.Would the webi reports continue to work upon re creating the universe with new connection details?
Please suggest a best and smart practice for the above scenario.

Hi,
Using Import Wizard tool in BO you can migrate Universe and Reports from dev env to test.
Using the Import Wizard tool you can migrate the reports.
Steps are as follows:
Open Import window:
In Source environment , enter the details of dev environment.
Destination wizard you have to enter Test env credentials.
Then you have to select all the universe and the wid files from this wizard (The files you want to transfer ).
Finally finish this wizard by pressing finish button.........
Hope this will help you
Regards
Sindhu

What are the Phases in Development ,Quality and Production

Development-----> CREATING PROCESS CHAIN,IF, DSO , QUERY IN BEX WHAT ELSE IN QUALITY AND PRODUCTION AND IMPLEMENTATION.

Hi Suri,
SCN won't teach any modules here.
If your under training please ask your trainer or refer your training notes.
Even on Google you can search and help yourself.
in future also please never ask basic questions here.Soon your thread will be hidden.
if your new to scn please read scxn rules.
The SCN Rules of Engagement
Getting Started with SCN
Thanks

How to transport Web Dynpro for Java to Quality and Production

Hi experts,
I am about to start my first Web Dynpro application, local on my PC. How can I make it available than in quality and production system?
Thank you very much.
Best regards,
Danijela

Hi,
If ur quality and production system can be used through the DTR only.
If u have authrization then u can directly chek in the files or application.
Otherwise u can send the Zipfile(Application)to be sent to ur coordinator then he will check in the Application into DTR.
For the Quality and productionsytem can be used Ear file from the DTR.
Thanks
Lohi.

Browser IE7.0 does not support WebDynpro in Quality and production only

Hi All,
Our portal version is NW04 SP15 adn NWDI is on NW700.We have Development ,Quality and production portal.We are using browser IE6.0 to see the WebDynpro application as we are unable to see the webdynpro application on browser IE7.0.We are gettimg message "Browser does not support WebDynpro".
However few days ago suddenly we are able to see webdynpro application on browser IE7.0 in the Development portal only.When we open the quality and production url on the browser IE7.0 we are getting error message "Browser does not support webdynpro".
Our Basis team askes us to analyze when we open the development url on IE7.0 we are able to see webDynpro application where as when we open the quality and prosuction url on browser IE 7.0 we are getting message "Browser does not support webdynpro"
Can anybody tell why does IE7 work in development (PWD), but not in other EP6 instances quality(PWQ), production (PWP)?
Thanks
Susmita

Hi
Thanks for all your response.
I have alredy gone through the forums why IE 7.0 doesnot support WebDynpro.What to do to make IE7.0 work for webDynpro(SAP note 991449).
I have already told basis team regarding the behaviour of IE7.0.However basis team is sticking to their question what has done in the development so that IE7.0 is working for WebDynpro in Development.
I will ask the patch level from basis team for Development,Quality,production.May be patch is different thats why Dev is working in IE7.0 and not in quality and production.
I am sure the issue not related to code or iView property and related to IE property.Is anything done on the Development instance PWD at Server so that we are able to see webdynpro on IE7.0 for development?
What i need to check in the url https://websmp106.sap-ag.de/pam as i am new to this url.
Thanks
Susmita

Process chain (RSPC) modifcation in Quality and production system

Hi,
In our landscape quality and production system is set as non modifiable. But we want to modify the process chain (RSPC) in Quality and production system.
As per the thread Need input: do process chain/InfoPackages changeable on PROD in your compa? in RSA1 -> Transport connection we made RSPC ( Process Chain) , RSPT (process chain starter) and RSPV (process variants) are changeable.
With this setting we are able to create/ edit new process chain in Quality and Production system. But we canu2019t edit the transported Process chain. i.e. process chain transported from Dev to Quality system.
We donu2019t want to open Business Information Warehouse: Customer Namespace (/BIC/ ) in Quality and production system (Se06). Please let me know is there any other settings needs to be.
We are on BI 7.0
Regards
Preethish

Hi ,
In RSA1 -> Transport Connection --> Object Changeability
Object has 3 state
Not Changable
Changable Original
Every thing changable
What is the difference b/w Changable Original and Every thing changable
Thanks..
Preethish

Program to Auto Import transports to quality and production systems

Hi Experts
Do anyone have a program that imports transport requests automatically into quality and production systems from development? I know there is a procedure to import all into QA that can be set in TMS.
But I am looking for a program instead that could auto import into quality and subsequently to production.
Thanks,
Ravali

You need to set the autoimport job in Q whichh will bring all the transport from Dev when they are released. For autoimport go to STMS --> import queue of your Q system -->Start import with the small truck sign and it will ask you to select the time (run it every 15 mins or so) --> start the job
Production you never setup an autoimport, there might be some transports which you may not want to send to prod, only the approved transport will go to prod. Hope this helps

Bestway to find difference between two roles in quality and production

We have a process of collecting su53 dump and then analyze for missing authorization . However some time although everything works fine in quality , it fails in production . Hence I want to know a simple methodology to compare roles in quality and production to know difference ... Can anyone share best methodolgy being used in your setup ?
NPB

(1)How to find the difference between two dates at Universe level and at report Level in IDT?
DaysBetween ([Sale Date];[Invoice Date]) returns 2 if [Sale Date] is 15 December 2001 and [Invoice Date] is 17 December 2001.
(2) How to change format of dates from YYYY/MM/DD to DD/MM/YYYY in IDT at prompt level ?
=FormatDate(ToDate(YOUR DARE OBJECT);"YYYY/MM/DD");"dd'/'MM'/'yyyy")
=To_Char (object name, required format)
Find the below link for more info.
http://scn.sap.com/community/semantic-layer/blog/2014/04/18/bi41-business-layer-enhancements--create-display-format
(3)What is VIEWS in IDT of data foundation layer when we right click? could u plz give one example where exactly we use VIEWS?
A custom data foundation view is a subset of the data foundation Master view. You can use views when editing a large data foundation, and interested in working with a subset of tables. You can define multiple custom views for the data foundation due to the complexity of the data warehouse.
Essentially, need created views for each individual star scheme (like Sales, Production, Finance, Accounting, etc.) plus a view for eachcomplex dimension structure (like Business Partner, Material, Customer, Plant etc.),
Find the below link for more info.
http://scn.sap.com/docs/DOC-54422
(4) How to represent & report my IDT data in dashboards? could u plz explain the steps?
Please find the below link: http://scn.sap.com/docs/DOC-27559

Upgrade from 4.6C to ECC6.0 - development quality and production

Upgrade from 4.6C to ECC6.0
I have got three systems right now...
Development(D1) Quality(Q1) Production(P1).
These three systems need to be upgraded to ECC6.0
The recommended process is to copy D1 to a new temporary server(D2) and
then upgrade it. At the time of the copy we will have to run the transactions
SPDD and SPAU for which the one one transport requests will be created.
Now after the complete upgradation we will be running the UCCCHECK and SCUV.
The problem is after running this process we are going to copy the Quality(Q1)
to a new quality system Q2. Now the code in the D2 system is unicode complaint with all the
same functionalities as in D1.
How to get all the change and customizing objects which is updated in the D2 system
to the Q2 system (only the relevant ones - this will also ensure for PRD as the same process could be followed)?
Or else do we have to repeat the process for both the new quality(Q2) and new production(P2)
systems?
Useful answers will be rewarded accordingly....

Hi,
If you do SPDD and SPAU changes to create unique transports (as per upgrade guide) so the Q2 upgrade will have it embeded during the upgrade process then you should not have any problem because after the D2 combined upgrade (unicode and Technical Upgrade) the system will be in Unicode, UCCHECK is to check unicode compatibility as long as I know. You won´t need to use SPDD and SPAU again in Q2.
Also you could do Upgrade to D2, run UCCHECK and SCOV and then create all changes to objects that needs to be changed to create requests. Then do Q2 upgrade and when is finished then you move every transport you need from D2 to Q2 to do the necesary tests, it should not take much time. In the upgrades I know and done this is the way the changes were moved up to PRD, we have never used the unique transport request mentioned in the Guide. During Quality tests developers and funtional consultants will need to keep doing changes until everything is OK so even if you create unique requests, you will also have to transport after PRD upgrade.
Either way you won't need to run SPDD and SPAU after D2 upgrade.
Good luck
Edited by: AC on Nov 18, 2008 1:26 PM

Difference in the performance of Quality and Production system

Hi All,
We have a scenario wherein we refreshed the production system data into quality system 1 month ago.
Few days back we noticed that when we are trying to fetch data from COMM_PRODUCT database table (in CRM Production system) based on the product description.....it was taking 2-3 mins.
However, when we try the same in quality system, it takes only 10 secs. Any idea as to how there is such a difference when both the production and quality contain nearly same data (was refreshed only one month ago).
Any thoughts on this?

You should really search the forum before asking. Exactly the same question was asked and answered here two weeks ago: Performance of the program is very good in Quality but Very poor in Prod.
Rob

Load to psa is in yellow status only in quality n production system

Hi All,
We have created a generic FM which wil take date parameter as input and fetch records for that specific month. This FM works perfectly fine in dev server, but when i run the same in quality and production the load status is still in yellow status.
FYI, data records are fetched/extracted correctly and data package individually is in green status. But under extraction flow i see the following message " Missing message: Selection completed " at this stage the status is in yellow.
If i check the job in r/3 system then the last job log entry is
" Asynchronous transmission of info IDoc 3 in task 0003 (1 parallel tasks) "
Kindly suggest what can be done here to resolve this. We have stuck for quite long on this.
Thanks & Regards,
Anup

hi
debug the FM program , if you wont find any then try this.
you may missing messages in extraction process
try this
trun load to red and re-start and check the source system extraction process also check in the source system envio t Rfc-- in the source system ( to know the status)
Missing message: Selection completed
Error: 'Missing message: Selection completed' - URGENT
http://wiki.sdn.sap.com/wiki/pages/viewpage.action?pageId=153780896
Data Loads into BI system
check this may help you.
Edited by: Srikanth.T on Dec 22, 2011 9:47 AM

Dev TR have to delete the Z Table data available in Quality and Prod sytems

Hi Friends,
I have added two new fields as primary key fields in a Z TABLE, which is existing in Quality and Production Systems with Data.
I incorporated these two new fields (Primary Key fields) in development. If the TR is moved to Quality and Production sytems, the TR have to delete the data available for that table in Quality and Production sytems. For this what I have to do in the Development System.
Please suggest me how to clear this.
I have checked in SCN and not find relevant threads.
Regards,
Suresh

Hi,
the best thing would be to write a query and transport it to both the systems and then execute in the respective systems to delete it.....
write the query in the t-code - SQVI transaction
Thanks,
Sid
Edited by: Siddharth Chordia on Dec 4, 2009 8:23 AM

Transporting an Object from Development to quality and then to Production

Hello SAP Friends
I want to know the step by step navigation for Transporting an Object from Development to Quality and from there to production..
Please give some detailed Navigation...

Hi Kiran,
use transport connection to collect the objects to request, rsa1->transprot connection.
use infocube as starting point to collect objects, left side choose 'object type', middle frame choose 'infocube' expand 'select objects', locate/search your infocube' and 'transfer', it will go to right side.
in right up, there are buttons, click 'mode' and choose manual, and grouping 'only necessary objects', and execute, this will collect infocube and required objects like infoobjects, infoarea, etc.
after that change grouping 'in dataflow before' and execute, this will collect update rules, ods, infosource, transfer rules, datasource assigned etc.
remember to assign source system, click yellow box with X icon and mark the source system.
after that use grouping 'in dataflow afterwards' to collect query, web template, role etc.
take a look transport docs
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/3010ba90-0201-0010-2896-e58547c6757e
http://help.sap.com/saphelp_nw2004s/helpdata/en/0b/5ee7377a98c17fe10000009b38f842/frameset.htm
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/e883de94-0501-0010-7d95-de5ffa503a86
http://help.sap.com/saphelp_nw2004s/helpdata/en/b5/1d733b73a8f706e10000000a11402f/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/57/38e1824eb711d182bf0000e829fbfe/frameset.htm
Re: Transport Organizer---
transport query (bex objects)
http://help.sap.com/saphelp_nw2004s/helpdata/en/38/5ee7377a98c17fe10000009b38f842/frameset.htm
hope this helps.
(Courtesy AHP from Re: transport)
Bye
Dinesh

ZReport getting dump in Production but not in Quality and development

Hi,
There isa Zreport which displays daily stock in PP module.
It is getting dump in Production not in quality and development.
Since four days it is getting dump. Before that it is fine.
Please any one guide How to resolve.
Advance Thanks.

Runtime Error SAPSQL_IN_ITAB_ILLEGAL_OPTION
 Occurred on 29.08.2007 at 08:50:13
Invalid value in OPTION field of value table for IN itab operator.
What happened?
Error in ABAP application program.
The current ABAP program "ZPPRDR417" had to be terminated because o
statements could not be executed.
This is probably due to an error in the ABAP program.
What can you do?
Print out the error message (using the "Print" function)
and make a note of the actions and input that caused the
error.
To resolve the problem, contact your SAP system administrator.
You can use transaction ST22 (ABAP Dump Analysis) to view and admin
termination messages, especially those beyond their normal deletio
date.
Error analysis
The current ABAP/4 program attempted to execute an ABAP/4 Open SQL
statement in which the WHERE condition contains an IN itab operator
The IN itab operator is used with internal tables which
have the following structure:
 SIGN(1) OPTION(2) LOW LIKE db_field HIGH LIKE db_field
The OPTION column should contain only one of the following values:
 "EQ LE GE CP BT NE LT GT NP NB"
The value " " is not allowed here.
How to correct the error
Use only one of the permitted values in the OPTION column.
Information on where terminated
The termination occurred in the ABAP program "ZPPRDR417" in "WIP_STOCK_REP
The main program was "ZPPRDR417 ".
The termination occurred in line 330 of the source code of the (Include)
program "ZPPRDR417_FORM"
of the source code of program "ZPPRDR417_FORM" (when calling the editor 33
Source code extract
Caution: Program has changed
Caution: At time of termination, Active source code no longer available
003000 ? r_bwart-low = '106'.
003010 ? append r_bwart.
003020 ?
003030 ? r_bwart-low = '124'.
003040 ? append r_bwart.
003050 ?
003060 ? r_bwart-low = '125'.
003070 ? append r_bwart.
003080 ?
003090 ? select matnr
003100 ? werks
003110 ? into table i_marc
003120 ? from marc
003130 ? where ( matnr LIKE 'BILC%'
003140 ? OR matnr LIKE 'LGN%'
003150 ? OR matnr LIKE 'BRN%'
003160 ? OR matnr LIKE 'EBB%' )
003170 ? AND matnr NE 'BRN_DECLASSE'
003180 ? AND matnr NE 'BRN_SAF'
003190 ? and werks in r_werks.
003200 ?
003210 ? r_material-sign = 'I'.
003220 ? r_material-option = 'EQ'.
003230 ?
003240 ? loop at i_marc into wa_marc.
003250 ? r_material-low = wa_marc-matnr.
003260 ? append r_material.
003270 ? endloop.
003280 ? clear r_material.
003290 ?
 > ? if not i_matdoc is initial.
003310 ? select MBLNR
003320 ? MJAHR
003330 ? ZEILE
003340 ? BWART
003350 ? MATNR
003360 ? WERKS
003370 ? SHKZG
003380 ? MENGE
003390 ? UMWRK
003400 ? into table i_mseg_qty
003410 ? from mseg
003420 ? for all entries in i_matdoc
003430 ? where MBLNR eq i_matdoc-MBLNR
003440 ? and MJAHR eq i_matdoc-MJAHR
003450 ? and BWART in r_bwart
003460 ? and matnr in r_material
003470 ? and werks in r_werks.
003480 ?
003490 ? sort i_mseg_qty by matnr.

Activate datasource at quality and production

Similar Messages

Maybe you are looking for